exchangev2: fetch manifest revisions

Now that the server has support for retrieving manifest data, we can
implement the client bits to call it.

We teach the changeset fetching code to capture the manifest revisions
that are encountered on incoming changesets. We then feed this into a
new function which filters out known manifests and then batches up
manifest data requests to the server.

This is different from the previous wire protocol in a few notable
ways.

First, the client fetches manifest data separately and explicitly.
Before, we'd ask the server for data pertaining to some changesets
(via a "getbundle" command) and manifests (and files) would be sent
automatically. Providing an API for looking up just manifest data
separately gives clients much more flexibility for manifest management.
For example, a client may choose to only fetch manifest data on demand
instead of prefetching it (i.e. partial clone).

Second, we send N commands to the server for manifest retrieval instead
of 1. This property has a few nice side-effects. One is that the
deterministic nature of the requests lends itself to server-side
caching. For example, say the remote has 50,000 manifests. If the
server is configured to cache responses, each time a new commit
arrives, you will have a cache miss and need to regenerate all outgoing
data. But if you makes N requests requesting 10,000 manifests each,
a new commit will still yield cache hits on the initial, unchanged
manifest batches/requests.

A derived benefit from these properties is that resumable clone is
conceptually simpler to implement. When making a monolithic request
for all of the repository data, recovering from an interrupted clone
is hard because the server was in the driver's seat and was maintaining
state about all the data that needed transferred. With the client
driving fetching, the client can persist the set of unfetched entities
and retry/resume a fetch if something goes wrong. Or we can fetch all
data N changesets at a time and slowly build up a repository. This
approach is drastically easier to implement when we have server APIs
exposing low-level repository primitives (such as manifests and files).

We don't yet support tree manifests. But it should be possible to
implement that with the existing wire protocol command.

Differential Revision: https://phab.mercurial-scm.org/D4489

mercurial/exchangev2.py

@@ -1,181 +1,294
 # exchangev2.py - repository exchange for wire protocol version 2
 #
 # Copyright 2018 Gregory Szorc <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2 or any later version.
 
 from __future__ import absolute_import
 
 import weakref
 
 from .i18n import _
 from .node import (
     nullid,
     short,
 )
 from . import (
     bookmarks,
+    error,
     mdiff,
     phases,
     pycompat,
     setdiscovery,
 )
 
 def pull(pullop):
     """Pull using wire protocol version 2."""
     repo = pullop.repo
     remote = pullop.remote
     tr = pullop.trmanager.transaction()
 
     # Figure out what needs to be fetched.
     common, fetch, remoteheads = _pullchangesetdiscovery(
         repo, remote, pullop.heads, abortwhenunrelated=pullop.force)
 
     # And fetch the data.
     pullheads = pullop.heads or remoteheads
     csetres = _fetchchangesets(repo, tr, remote, common, fetch, pullheads)
 
     # New revisions are written to the changelog. But all other updates
     # are deferred. Do those now.
 
     # Ensure all new changesets are draft by default. If the repo is
     # publishing, the phase will be adjusted by the loop below.
     if csetres['added']:
         phases.registernew(repo, tr, phases.draft, csetres['added'])
 
     # And adjust the phase of all changesets accordingly.
     for phase in phases.phasenames:
         if phase == b'secret' or not csetres['nodesbyphase'][phase]:
             continue
 
         phases.advanceboundary(repo, tr, phases.phasenames.index(phase),
                                csetres['nodesbyphase'][phase])
 
     # Write bookmark updates.
     bookmarks.updatefromremote(repo.ui, repo, csetres['bookmarks'],
                                remote.url(), pullop.gettransaction,
                                explicit=pullop.explicitbookmarks)
 
+    _fetchmanifests(repo, tr, remote, csetres['manifestnodes'])
+
 def _pullchangesetdiscovery(repo, remote, heads, abortwhenunrelated=True):
     """Determine which changesets need to be pulled."""
 
     if heads:
         knownnode = repo.changelog.hasnode
         if all(knownnode(head) for head in heads):
             return heads, False, heads
 
     # TODO wire protocol version 2 is capable of more efficient discovery
     # than setdiscovery. Consider implementing something better.
     common, fetch, remoteheads = setdiscovery.findcommonheads(
         repo.ui, repo, remote, abortwhenunrelated=abortwhenunrelated)
 
     common = set(common)
     remoteheads = set(remoteheads)
 
     # If a remote head is filtered locally, put it back in the common set.
     # See the comment in exchange._pulldiscoverychangegroup() for more.
 
     if fetch and remoteheads:
         nodemap = repo.unfiltered().changelog.nodemap
 
         common |= {head for head in remoteheads if head in nodemap}
 
         if set(remoteheads).issubset(common):
             fetch = []
 
     common.discard(nullid)
 
     return common, fetch, remoteheads
 
 def _fetchchangesets(repo, tr, remote, common, fetch, remoteheads):
     # TODO consider adding a step here where we obtain the DAG shape first
     # (or ask the server to slice changesets into chunks for us) so that
     # we can perform multiple fetches in batches. This will facilitate
     # resuming interrupted clones, higher server-side cache hit rates due
     # to smaller segments, etc.
     with remote.commandexecutor() as e:
         objs = e.callcommand(b'changesetdata', {
             b'noderange': [sorted(common), sorted(remoteheads)],
             b'fields': {b'bookmarks', b'parents', b'phase', b'revision'},
         }).result()
 
         # The context manager waits on all response data when exiting. So
         # we need to remain in the context manager in order to stream data.
         return _processchangesetdata(repo, tr, objs)
 
 def _processchangesetdata(repo, tr, objs):
     repo.hook('prechangegroup', throw=True,
               **pycompat.strkwargs(tr.hookargs))
 
     urepo = repo.unfiltered()
     cl = urepo.changelog
 
     cl.delayupdate(tr)
 
     # The first emitted object is a header describing the data that
     # follows.
     meta = next(objs)
 
     progress = repo.ui.makeprogress(_('changesets'),
                                     unit=_('chunks'),
                                     total=meta.get(b'totalitems'))
 
+    manifestnodes = {}
+
     def linkrev(node):
         repo.ui.debug('add changeset %s\n' % short(node))
         # Linkrev for changelog is always self.
         return len(cl)
 
     def onchangeset(cl, node):
         progress.increment()
 
+        revision = cl.changelogrevision(node)
+
+        # We need to preserve the mapping of changelog revision to node
+        # so we can set the linkrev accordingly when manifests are added.
+        manifestnodes[cl.rev(node)] = revision.manifest
+
     nodesbyphase = {phase: set() for phase in phases.phasenames}
     remotebookmarks = {}
 
     # addgroup() expects a 7-tuple describing revisions. This normalizes
     # the wire data to that format.
     #
     # This loop also aggregates non-revision metadata, such as phase
     # data.
     def iterrevisions():
         for cset in objs:
             node = cset[b'node']
 
             if b'phase' in cset:
                 nodesbyphase[cset[b'phase']].add(node)
 
             for mark in cset.get(b'bookmarks', []):
                 remotebookmarks[mark] = node
 
             # TODO add mechanism for extensions to examine records so they
             # can siphon off custom data fields.
 
             # Some entries might only be metadata only updates.
             if b'revisionsize' not in cset:
                 continue
 
             data = next(objs)
 
             yield (
                 node,
                 cset[b'parents'][0],
                 cset[b'parents'][1],
                 # Linknode is always itself for changesets.
                 cset[b'node'],
                 # We always send full revisions. So delta base is not set.
                 nullid,
                 mdiff.trivialdiffheader(len(data)) + data,
                 # Flags not yet supported.
                 0,
             )
 
     added = cl.addgroup(iterrevisions(), linkrev, weakref.proxy(tr),
                         addrevisioncb=onchangeset)
 
     progress.complete()
 
     return {
         'added': added,
         'nodesbyphase': nodesbyphase,
         'bookmarks': remotebookmarks,
+        'manifestnodes': manifestnodes,
     }
+
+def _fetchmanifests(repo, tr, remote, manifestnodes):
+    rootmanifest = repo.manifestlog.getstorage(b'')
+
+    # Some manifests can be shared between changesets. Filter out revisions
+    # we already know about.
+    fetchnodes = []
+    linkrevs = {}
+    seen = set()
+
+    for clrev, node in sorted(manifestnodes.iteritems()):
+        if node in seen:
+            continue
+
+        try:
+            rootmanifest.rev(node)
+        except error.LookupError:
+            fetchnodes.append(node)
+            linkrevs[node] = clrev
+
+        seen.add(node)
+
+    # TODO handle tree manifests
+
+    # addgroup() expects 7-tuple describing revisions. This normalizes
+    # the wire data to that format.
+    def iterrevisions(objs, progress):
+        for manifest in objs:
+            node = manifest[b'node']
+
+            if b'deltasize' in manifest:
+                basenode = manifest[b'deltabasenode']
+                delta = next(objs)
+            elif b'revisionsize' in manifest:
+                basenode = nullid
+                revision = next(objs)
+                delta = mdiff.trivialdiffheader(len(revision)) + revision
+            else:
+                continue
+
+            yield (
+                node,
+                manifest[b'parents'][0],
+                manifest[b'parents'][1],
+                # The value passed in is passed to the lookup function passed
+                # to addgroup(). We already have a map of manifest node to
+                # changelog revision number. So we just pass in the
+                # manifest node here and use linkrevs.__getitem__ as the
+                # resolution function.
+                node,
+                basenode,
+                delta,
+                # Flags not yet supported.
+                0
+            )
+
+            progress.increment()
+
+    progress = repo.ui.makeprogress(_('manifests'), unit=_('chunks'),
+                                    total=len(fetchnodes))
+
+    # Fetch manifests 10,000 per command.
+    # TODO have server advertise preferences?
+    # TODO make size configurable on client?
+    batchsize = 10000
+
+    # We send commands 1 at a time to the remote. This is not the most
+    # efficient because we incur a round trip at the end of each batch.
+    # However, the existing frame-based reactor keeps consuming server
+    # data in the background. And this results in response data buffering
+    # in memory. This can consume gigabytes of memory.
+    # TODO send multiple commands in a request once background buffering
+    # issues are resolved.
+
+    added = []
+
+    for i in pycompat.xrange(0, len(fetchnodes), batchsize):
+        batch = [node for node in fetchnodes[i:i + batchsize]]
+        if not batch:
+            continue
+
+        with remote.commandexecutor() as e:
+            objs = e.callcommand(b'manifestdata', {
+                b'tree': b'',
+                b'nodes': batch,
+                b'fields': {b'parents', b'revision'},
+            }).result()
+
+            # Chomp off header object.
+            next(objs)
+
+            added.extend(rootmanifest.addgroup(
+                iterrevisions(objs, progress),
+                linkrevs.__getitem__,
+                weakref.proxy(tr)))
+
+    progress.complete()
+
+    return {
+        'added': added,
+    }

tests/test-wireproto-exchangev2.t

@@ -1,395 +1,485
 Tests for wire protocol version 2 exchange.
 Tests in this file should be folded into existing tests once protocol
 v2 has enough features that it can be enabled via #testcase in existing
 tests.
 
   $ . $TESTDIR/wireprotohelpers.sh
   $ enablehttpv2client
 
   $ hg init server-simple
   $ enablehttpv2 server-simple
   $ cd server-simple
   $ cat >> .hg/hgrc << EOF
   > [phases]
   > publish = false
   > EOF
   $ echo a0 > a
   $ echo b0 > b
   $ hg -q commit -A -m 'commit 0'
 
   $ echo a1 > a
   $ hg commit -m 'commit 1'
   $ hg phase --public -r .
   $ echo a2 > a
   $ hg commit -m 'commit 2'
 
   $ hg -q up -r 0
   $ echo b1 > b
   $ hg -q commit -m 'head 2 commit 1'
   $ echo b2 > b
   $ hg -q commit -m 'head 2 commit 2'
 
   $ hg serve -p $HGPORT -d --pid-file hg.pid -E error.log
   $ cat hg.pid > $DAEMON_PIDS
 
   $ cd ..
 
 Test basic clone
 
   $ hg --debug clone -U http://localhost:$HGPORT client-simple
   using http://localhost:$HGPORT/
   sending capabilities command
   query 1; heads
   sending 2 commands
   sending command heads: {}
   sending command known: {
     'nodes': []
   }
   received frame(size=11; request=1; stream=2; streamflags=stream-begin; type=command-response; flags=continuation)
   received frame(size=43; request=1; stream=2; streamflags=; type=command-response; flags=continuation)
   received frame(size=0; request=1; stream=2; streamflags=; type=command-response; flags=eos)
   received frame(size=11; request=3; stream=2; streamflags=; type=command-response; flags=continuation)
   received frame(size=1; request=3; stream=2; streamflags=; type=command-response; flags=continuation)
   received frame(size=0; request=3; stream=2; streamflags=; type=command-response; flags=eos)
   sending 1 commands
   sending command changesetdata: {
     'fields': set([
       'bookmarks',
       'parents',
       'phase',
       'revision'
     ]),
     'noderange': [
       [],
       [
         '\xca\xa2\xa4eE\x1d\xd1\xfa\xcd\xa0\xf5\xb1#\x12\xc3UXA\x88\xa1',
         '\xcd%4vk\xec\xe18\xc7\xc1\xaf\xdch%0/\x0fb\xd8\x1f'
       ]
     ]
   }
   received frame(size=11; request=1; stream=2; streamflags=stream-begin; type=command-response; flags=continuation)
   received frame(size=871; request=1; stream=2; streamflags=; type=command-response; flags=continuation)
   received frame(size=0; request=1; stream=2; streamflags=; type=command-response; flags=eos)
   add changeset 3390ef850073
   add changeset 4432d83626e8
   add changeset cd2534766bec
   add changeset e96ae20f4188
   add changeset caa2a465451d
   checking for updated bookmarks
+  sending 1 commands
+  sending command manifestdata: {
+    'fields': set([
+      'parents',
+      'revision'
+    ]),
+    'nodes': [
+      '\x99/Gy\x02\x9a=\xf8\xd0fm\x00\xbb\x92OicN&A',
+      '\xa9\x88\xfbCX>\x87\x1d\x1e\xd5u\x0e\xe0t\xc6\xd8@\xbb\xbf\xc8',
+      '\xec\x80NH\x8c \x88\xc25\t\x9a\x10 u\x13\xbe\xcd\xc3\xdd\xa5',
+      '\x04\\\x7f9\'\xda\x13\xe7Z\xf8\xf0\xe4\xf0HI\xe4a\xa9x\x0f',
+      '7\x9c\xb0\xc2\xe6d\\y\xdd\xc5\x9a\x1dG\'\xa9\xfb\x83\n\xeb&'
+    ],
+    'tree': ''
+  }
+  received frame(size=11; request=1; stream=2; streamflags=stream-begin; type=command-response; flags=continuation)
+  received frame(size=922; request=1; stream=2; streamflags=; type=command-response; flags=continuation)
+  received frame(size=0; request=1; stream=2; streamflags=; type=command-response; flags=eos)
   updating the branch cache
   new changesets 3390ef850073:caa2a465451d (3 drafts)
 
 All changesets should have been transferred
 
   $ hg -R client-simple debugindex -c
      rev linkrev nodeid       p1           p2
        0       0 3390ef850073 000000000000 000000000000
        1       1 4432d83626e8 3390ef850073 000000000000
        2       2 cd2534766bec 4432d83626e8 000000000000
        3       3 e96ae20f4188 3390ef850073 000000000000
        4       4 caa2a465451d e96ae20f4188 000000000000
 
   $ hg -R client-simple log -G -T '{rev} {node} {phase}\n'
   o  4 caa2a465451dd1facda0f5b12312c355584188a1 draft
   |
   o  3 e96ae20f4188487b9ae4ef3941c27c81143146e5 draft
   |
   | o  2 cd2534766bece138c7c1afdc6825302f0f62d81f draft
   | |
   | o  1 4432d83626e8a98655f062ec1f2a43b07f7fbbb0 public
   |/
   o  0 3390ef850073fbc2f0dfff2244342c8e9229013a public
   
 
+All manifests should have been transferred
+
+  $ hg -R client-simple debugindex -m
+     rev linkrev nodeid       p1           p2
+       0       0 992f4779029a 000000000000 000000000000
+       1       1 a988fb43583e 992f4779029a 000000000000
+       2       2 ec804e488c20 a988fb43583e 000000000000
+       3       3 045c7f3927da 992f4779029a 000000000000
+       4       4 379cb0c2e664 045c7f3927da 000000000000
+
 Cloning only a specific revision works
 
   $ hg --debug clone -U -r 4432d83626e8 http://localhost:$HGPORT client-singlehead
   using http://localhost:$HGPORT/
   sending capabilities command
   sending 1 commands
   sending command lookup: {
     'key': '4432d83626e8'
   }
   received frame(size=11; request=1; stream=2; streamflags=stream-begin; type=command-response; flags=continuation)
   received frame(size=21; request=1; stream=2; streamflags=; type=command-response; flags=continuation)
   received frame(size=0; request=1; stream=2; streamflags=; type=command-response; flags=eos)
   query 1; heads
   sending 2 commands
   sending command heads: {}
   sending command known: {
     'nodes': []
   }
   received frame(size=11; request=1; stream=2; streamflags=stream-begin; type=command-response; flags=continuation)
   received frame(size=43; request=1; stream=2; streamflags=; type=command-response; flags=continuation)
   received frame(size=0; request=1; stream=2; streamflags=; type=command-response; flags=eos)
   received frame(size=11; request=3; stream=2; streamflags=; type=command-response; flags=continuation)
   received frame(size=1; request=3; stream=2; streamflags=; type=command-response; flags=continuation)
   received frame(size=0; request=3; stream=2; streamflags=; type=command-response; flags=eos)
   sending 1 commands
   sending command changesetdata: {
     'fields': set([
       'bookmarks',
       'parents',
       'phase',
       'revision'
     ]),
     'noderange': [
       [],
       [
         'D2\xd86&\xe8\xa9\x86U\xf0b\xec\x1f*C\xb0\x7f\x7f\xbb\xb0'
       ]
     ]
   }
   received frame(size=11; request=1; stream=2; streamflags=stream-begin; type=command-response; flags=continuation)
   received frame(size=353; request=1; stream=2; streamflags=; type=command-response; flags=continuation)
   received frame(size=0; request=1; stream=2; streamflags=; type=command-response; flags=eos)
   add changeset 3390ef850073
   add changeset 4432d83626e8
   checking for updated bookmarks
+  sending 1 commands
+  sending command manifestdata: {
+    'fields': set([
+      'parents',
+      'revision'
+    ]),
+    'nodes': [
+      '\x99/Gy\x02\x9a=\xf8\xd0fm\x00\xbb\x92OicN&A',
+      '\xa9\x88\xfbCX>\x87\x1d\x1e\xd5u\x0e\xe0t\xc6\xd8@\xbb\xbf\xc8'
+    ],
+    'tree': ''
+  }
+  received frame(size=11; request=1; stream=2; streamflags=stream-begin; type=command-response; flags=continuation)
+  received frame(size=376; request=1; stream=2; streamflags=; type=command-response; flags=continuation)
+  received frame(size=0; request=1; stream=2; streamflags=; type=command-response; flags=eos)
   updating the branch cache
   new changesets 3390ef850073:4432d83626e8
 
   $ cd client-singlehead
 
   $ hg log -G -T '{rev} {node} {phase}\n'
   o  1 4432d83626e8a98655f062ec1f2a43b07f7fbbb0 public
   |
   o  0 3390ef850073fbc2f0dfff2244342c8e9229013a public
   
 
+  $ hg debugindex -m
+     rev linkrev nodeid       p1           p2
+       0       0 992f4779029a 000000000000 000000000000
+       1       1 a988fb43583e 992f4779029a 000000000000
+
 Incremental pull works
 
   $ hg --debug pull
   pulling from http://localhost:$HGPORT/
   using http://localhost:$HGPORT/
   sending capabilities command
   query 1; heads
   sending 2 commands
   sending command heads: {}
   sending command known: {
     'nodes': [
       'D2\xd86&\xe8\xa9\x86U\xf0b\xec\x1f*C\xb0\x7f\x7f\xbb\xb0'
     ]
   }
   received frame(size=11; request=1; stream=2; streamflags=stream-begin; type=command-response; flags=continuation)
   received frame(size=43; request=1; stream=2; streamflags=; type=command-response; flags=continuation)
   received frame(size=0; request=1; stream=2; streamflags=; type=command-response; flags=eos)
   received frame(size=11; request=3; stream=2; streamflags=; type=command-response; flags=continuation)
   received frame(size=2; request=3; stream=2; streamflags=; type=command-response; flags=continuation)
   received frame(size=0; request=3; stream=2; streamflags=; type=command-response; flags=eos)
   searching for changes
   all local heads known remotely
   sending 1 commands
   sending command changesetdata: {
     'fields': set([
       'bookmarks',
       'parents',
       'phase',
       'revision'
     ]),
     'noderange': [
       [
         'D2\xd86&\xe8\xa9\x86U\xf0b\xec\x1f*C\xb0\x7f\x7f\xbb\xb0'
       ],
       [
         '\xca\xa2\xa4eE\x1d\xd1\xfa\xcd\xa0\xf5\xb1#\x12\xc3UXA\x88\xa1',
         '\xcd%4vk\xec\xe18\xc7\xc1\xaf\xdch%0/\x0fb\xd8\x1f'
       ]
     ]
   }
   received frame(size=11; request=1; stream=2; streamflags=stream-begin; type=command-response; flags=continuation)
   received frame(size=571; request=1; stream=2; streamflags=; type=command-response; flags=continuation)
   received frame(size=0; request=1; stream=2; streamflags=; type=command-response; flags=eos)
   add changeset cd2534766bec
   add changeset e96ae20f4188
   add changeset caa2a465451d
   checking for updated bookmarks
+  sending 1 commands
+  sending command manifestdata: {
+    'fields': set([
+      'parents',
+      'revision'
+    ]),
+    'nodes': [
+      '\xec\x80NH\x8c \x88\xc25\t\x9a\x10 u\x13\xbe\xcd\xc3\xdd\xa5',
+      '\x04\\\x7f9\'\xda\x13\xe7Z\xf8\xf0\xe4\xf0HI\xe4a\xa9x\x0f',
+      '7\x9c\xb0\xc2\xe6d\\y\xdd\xc5\x9a\x1dG\'\xa9\xfb\x83\n\xeb&'
+    ],
+    'tree': ''
+  }
+  received frame(size=11; request=1; stream=2; streamflags=stream-begin; type=command-response; flags=continuation)
+  received frame(size=559; request=1; stream=2; streamflags=; type=command-response; flags=continuation)
+  received frame(size=0; request=1; stream=2; streamflags=; type=command-response; flags=eos)
   updating the branch cache
   new changesets cd2534766bec:caa2a465451d (3 drafts)
   (run 'hg update' to get a working copy)
 
   $ hg log -G -T '{rev} {node} {phase}\n'
   o  4 caa2a465451dd1facda0f5b12312c355584188a1 draft
   |
   o  3 e96ae20f4188487b9ae4ef3941c27c81143146e5 draft
   |
   | o  2 cd2534766bece138c7c1afdc6825302f0f62d81f draft
   | |
   | o  1 4432d83626e8a98655f062ec1f2a43b07f7fbbb0 public
   |/
   o  0 3390ef850073fbc2f0dfff2244342c8e9229013a public
   
 
+  $ hg debugindex -m
+     rev linkrev nodeid       p1           p2
+       0       0 992f4779029a 000000000000 000000000000
+       1       1 a988fb43583e 992f4779029a 000000000000
+       2       2 ec804e488c20 a988fb43583e 000000000000
+       3       3 045c7f3927da 992f4779029a 000000000000
+       4       4 379cb0c2e664 045c7f3927da 000000000000
+
 Phase-only update works
 
   $ hg -R ../server-simple phase --public -r caa2a465451dd
   $ hg --debug pull
   pulling from http://localhost:$HGPORT/
   using http://localhost:$HGPORT/
   sending capabilities command
   query 1; heads
   sending 2 commands
   sending command heads: {}
   sending command known: {
     'nodes': [
       '\xcd%4vk\xec\xe18\xc7\xc1\xaf\xdch%0/\x0fb\xd8\x1f',
       '\xca\xa2\xa4eE\x1d\xd1\xfa\xcd\xa0\xf5\xb1#\x12\xc3UXA\x88\xa1'
     ]
   }
   received frame(size=11; request=1; stream=2; streamflags=stream-begin; type=command-response; flags=continuation)
   received frame(size=43; request=1; stream=2; streamflags=; type=command-response; flags=continuation)
   received frame(size=0; request=1; stream=2; streamflags=; type=command-response; flags=eos)
   received frame(size=11; request=3; stream=2; streamflags=; type=command-response; flags=continuation)
   received frame(size=3; request=3; stream=2; streamflags=; type=command-response; flags=continuation)
   received frame(size=0; request=3; stream=2; streamflags=; type=command-response; flags=eos)
   searching for changes
   all remote heads known locally
   sending 1 commands
   sending command changesetdata: {
     'fields': set([
       'bookmarks',
       'parents',
       'phase',
       'revision'
     ]),
     'noderange': [
       [
         '\xca\xa2\xa4eE\x1d\xd1\xfa\xcd\xa0\xf5\xb1#\x12\xc3UXA\x88\xa1',
         '\xcd%4vk\xec\xe18\xc7\xc1\xaf\xdch%0/\x0fb\xd8\x1f'
       ],
       [
         '\xca\xa2\xa4eE\x1d\xd1\xfa\xcd\xa0\xf5\xb1#\x12\xc3UXA\x88\xa1',
         '\xcd%4vk\xec\xe18\xc7\xc1\xaf\xdch%0/\x0fb\xd8\x1f'
       ]
     ]
   }
   received frame(size=11; request=1; stream=2; streamflags=stream-begin; type=command-response; flags=continuation)
   received frame(size=92; request=1; stream=2; streamflags=; type=command-response; flags=continuation)
   received frame(size=0; request=1; stream=2; streamflags=; type=command-response; flags=eos)
   checking for updated bookmarks
   2 local changesets published
   (run 'hg update' to get a working copy)
 
   $ hg log -G -T '{rev} {node} {phase}\n'
   o  4 caa2a465451dd1facda0f5b12312c355584188a1 public
   |
   o  3 e96ae20f4188487b9ae4ef3941c27c81143146e5 public
   |
   | o  2 cd2534766bece138c7c1afdc6825302f0f62d81f draft
   | |
   | o  1 4432d83626e8a98655f062ec1f2a43b07f7fbbb0 public
   |/
   o  0 3390ef850073fbc2f0dfff2244342c8e9229013a public
   
 
   $ cd ..
 
 Bookmarks are transferred on clone
 
   $ hg -R server-simple bookmark -r 3390ef850073fbc2f0dfff2244342c8e9229013a book-1
   $ hg -R server-simple bookmark -r cd2534766bece138c7c1afdc6825302f0f62d81f book-2
 
   $ hg --debug clone -U http://localhost:$HGPORT/ client-bookmarks
   using http://localhost:$HGPORT/
   sending capabilities command
   query 1; heads
   sending 2 commands
   sending command heads: {}
   sending command known: {
     'nodes': []
   }
   received frame(size=11; request=1; stream=2; streamflags=stream-begin; type=command-response; flags=continuation)
   received frame(size=43; request=1; stream=2; streamflags=; type=command-response; flags=continuation)
   received frame(size=0; request=1; stream=2; streamflags=; type=command-response; flags=eos)
   received frame(size=11; request=3; stream=2; streamflags=; type=command-response; flags=continuation)
   received frame(size=1; request=3; stream=2; streamflags=; type=command-response; flags=continuation)
   received frame(size=0; request=3; stream=2; streamflags=; type=command-response; flags=eos)
   sending 1 commands
   sending command changesetdata: {
     'fields': set([
       'bookmarks',
       'parents',
       'phase',
       'revision'
     ]),
     'noderange': [
       [],
       [
         '\xca\xa2\xa4eE\x1d\xd1\xfa\xcd\xa0\xf5\xb1#\x12\xc3UXA\x88\xa1',
         '\xcd%4vk\xec\xe18\xc7\xc1\xaf\xdch%0/\x0fb\xd8\x1f'
       ]
     ]
   }
   received frame(size=11; request=1; stream=2; streamflags=stream-begin; type=command-response; flags=continuation)
   received frame(size=909; request=1; stream=2; streamflags=; type=command-response; flags=continuation)
   received frame(size=0; request=1; stream=2; streamflags=; type=command-response; flags=eos)
   add changeset 3390ef850073
   add changeset 4432d83626e8
   add changeset cd2534766bec
   add changeset e96ae20f4188
   add changeset caa2a465451d
   checking for updated bookmarks
   adding remote bookmark book-1
   adding remote bookmark book-2
+  sending 1 commands
+  sending command manifestdata: {
+    'fields': set([
+      'parents',
+      'revision'
+    ]),
+    'nodes': [
+      '\x99/Gy\x02\x9a=\xf8\xd0fm\x00\xbb\x92OicN&A',
+      '\xa9\x88\xfbCX>\x87\x1d\x1e\xd5u\x0e\xe0t\xc6\xd8@\xbb\xbf\xc8',
+      '\xec\x80NH\x8c \x88\xc25\t\x9a\x10 u\x13\xbe\xcd\xc3\xdd\xa5',
+      '\x04\\\x7f9\'\xda\x13\xe7Z\xf8\xf0\xe4\xf0HI\xe4a\xa9x\x0f',
+      '7\x9c\xb0\xc2\xe6d\\y\xdd\xc5\x9a\x1dG\'\xa9\xfb\x83\n\xeb&'
+    ],
+    'tree': ''
+  }
+  received frame(size=11; request=1; stream=2; streamflags=stream-begin; type=command-response; flags=continuation)
+  received frame(size=922; request=1; stream=2; streamflags=; type=command-response; flags=continuation)
+  received frame(size=0; request=1; stream=2; streamflags=; type=command-response; flags=eos)
   updating the branch cache
   new changesets 3390ef850073:caa2a465451d (1 drafts)
 
   $ hg -R client-bookmarks bookmarks
      book-1                    0:3390ef850073
      book-2                    2:cd2534766bec
 
 Server-side bookmark moves are reflected during `hg pull`
 
   $ hg -R server-simple bookmark -r cd2534766bece138c7c1afdc6825302f0f62d81f book-1
   moving bookmark 'book-1' forward from 3390ef850073
 
   $ hg -R client-bookmarks --debug pull
   pulling from http://localhost:$HGPORT/
   using http://localhost:$HGPORT/
   sending capabilities command
   query 1; heads
   sending 2 commands
   sending command heads: {}
   sending command known: {
     'nodes': [
       '\xcd%4vk\xec\xe18\xc7\xc1\xaf\xdch%0/\x0fb\xd8\x1f',
       '\xca\xa2\xa4eE\x1d\xd1\xfa\xcd\xa0\xf5\xb1#\x12\xc3UXA\x88\xa1'
     ]
   }
   received frame(size=11; request=1; stream=2; streamflags=stream-begin; type=command-response; flags=continuation)
   received frame(size=43; request=1; stream=2; streamflags=; type=command-response; flags=continuation)
   received frame(size=0; request=1; stream=2; streamflags=; type=command-response; flags=eos)
   received frame(size=11; request=3; stream=2; streamflags=; type=command-response; flags=continuation)
   received frame(size=3; request=3; stream=2; streamflags=; type=command-response; flags=continuation)
   received frame(size=0; request=3; stream=2; streamflags=; type=command-response; flags=eos)
   searching for changes
   all remote heads known locally
   sending 1 commands
   sending command changesetdata: {
     'fields': set([
       'bookmarks',
       'parents',
       'phase',
       'revision'
     ]),
     'noderange': [
       [
         '\xca\xa2\xa4eE\x1d\xd1\xfa\xcd\xa0\xf5\xb1#\x12\xc3UXA\x88\xa1',
         '\xcd%4vk\xec\xe18\xc7\xc1\xaf\xdch%0/\x0fb\xd8\x1f'
       ],
       [
         '\xca\xa2\xa4eE\x1d\xd1\xfa\xcd\xa0\xf5\xb1#\x12\xc3UXA\x88\xa1',
         '\xcd%4vk\xec\xe18\xc7\xc1\xaf\xdch%0/\x0fb\xd8\x1f'
       ]
     ]
   }
   received frame(size=11; request=1; stream=2; streamflags=stream-begin; type=command-response; flags=continuation)
   received frame(size=144; request=1; stream=2; streamflags=; type=command-response; flags=continuation)
   received frame(size=0; request=1; stream=2; streamflags=; type=command-response; flags=eos)
   checking for updated bookmarks
   updating bookmark book-1
   (run 'hg update' to get a working copy)
 
   $ hg -R client-bookmarks bookmarks
      book-1                    2:cd2534766bec
      book-2                    2:cd2534766bec