histedit: add "roll" command to fold commit data and drop message (issue4256)

This new histedit command (short for "rollup") is a variant of "fold" akin to
"hg amend" for working copy: it accumulates changes without interrupting
the user and asking for an updated commit message.

hgext/histedit.py

@@ -1,931 +1,950
 # histedit.py - interactive history editing for mercurial
 #
 # Copyright 2009 Augie Fackler <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2 or any later version.
 """interactive history editing
 
 With this extension installed, Mercurial gains one new command: histedit. Usage
 is as follows, assuming the following history::
 
  @  3[tip]   7c2fd3b9020c   2009-04-27 18:04 -0500   durin42
  |    Add delta
  |
  o  2   030b686bedc4   2009-04-27 18:04 -0500   durin42
  |    Add gamma
  |
  o  1   c561b4e977df   2009-04-27 18:04 -0500   durin42
  |    Add beta
  |
  o  0   d8d2fcd0e319   2009-04-27 18:04 -0500   durin42
       Add alpha
 
 If you were to run ``hg histedit c561b4e977df``, you would see the following
 file open in your editor::
 
  pick c561b4e977df Add beta
  pick 030b686bedc4 Add gamma
  pick 7c2fd3b9020c Add delta
 
  # Edit history between c561b4e977df and 7c2fd3b9020c
  #
  # Commits are listed from least to most recent
  #
  # Commands:
  #  p, pick = use commit
  #  e, edit = use commit, but stop for amending
  #  f, fold = use commit, but combine it with the one above
+ #  r, roll = like fold, but discard this commit's description
  #  d, drop = remove commit from history
  #  m, mess = edit message without changing commit content
  #
 
 In this file, lines beginning with ``#`` are ignored. You must specify a rule
 for each revision in your history. For example, if you had meant to add gamma
 before beta, and then wanted to add delta in the same revision as beta, you
 would reorganize the file to look like this::
 
  pick 030b686bedc4 Add gamma
  pick c561b4e977df Add beta
  fold 7c2fd3b9020c Add delta
 
  # Edit history between c561b4e977df and 7c2fd3b9020c
  #
  # Commits are listed from least to most recent
  #
  # Commands:
  #  p, pick = use commit
  #  e, edit = use commit, but stop for amending
  #  f, fold = use commit, but combine it with the one above
+ #  r, roll = like fold, but discard this commit's description
  #  d, drop = remove commit from history
  #  m, mess = edit message without changing commit content
  #
 
 At which point you close the editor and ``histedit`` starts working. When you
 specify a ``fold`` operation, ``histedit`` will open an editor when it folds
 those revisions together, offering you a chance to clean up the commit message::
 
  Add beta
  ***
  Add delta
 
 Edit the commit message to your liking, then close the editor. For
 this example, let's assume that the commit message was changed to
 ``Add beta and delta.`` After histedit has run and had a chance to
 remove any old or temporary revisions it needed, the history looks
 like this::
 
  @  2[tip]   989b4d060121   2009-04-27 18:04 -0500   durin42
  |    Add beta and delta.
  |
  o  1   081603921c3f   2009-04-27 18:04 -0500   durin42
  |    Add gamma
  |
  o  0   d8d2fcd0e319   2009-04-27 18:04 -0500   durin42
       Add alpha
 
 Note that ``histedit`` does *not* remove any revisions (even its own temporary
 ones) until after it has completed all the editing operations, so it will
 probably perform several strip operations when it's done. For the above example,
 it had to run strip twice. Strip can be slow depending on a variety of factors,
 so you might need to be a little patient. You can choose to keep the original
 revisions by passing the ``--keep`` flag.
 
 The ``edit`` operation will drop you back to a command prompt,
 allowing you to edit files freely, or even use ``hg record`` to commit
 some changes as a separate commit. When you're done, any remaining
 uncommitted changes will be committed as well. When done, run ``hg
 histedit --continue`` to finish this step. You'll be prompted for a
 new commit message, but the default commit message will be the
 original message for the ``edit`` ed revision.
 
 The ``message`` operation will give you a chance to revise a commit
 message without changing the contents. It's a shortcut for doing
 ``edit`` immediately followed by `hg histedit --continue``.
 
 If ``histedit`` encounters a conflict when moving a revision (while
 handling ``pick`` or ``fold``), it'll stop in a similar manner to
 ``edit`` with the difference that it won't prompt you for a commit
 message when done. If you decide at this point that you don't like how
 much work it will be to rearrange history, or that you made a mistake,
 you can use ``hg histedit --abort`` to abandon the new changes you
 have made and return to the state before you attempted to edit your
 history.
 
 If we clone the histedit-ed example repository above and add four more
 changes, such that we have the following history::
 
    @  6[tip]   038383181893   2009-04-27 18:04 -0500   stefan
    |    Add theta
    |
    o  5   140988835471   2009-04-27 18:04 -0500   stefan
    |    Add eta
    |
    o  4   122930637314   2009-04-27 18:04 -0500   stefan
    |    Add zeta
    |
    o  3   836302820282   2009-04-27 18:04 -0500   stefan
    |    Add epsilon
    |
    o  2   989b4d060121   2009-04-27 18:04 -0500   durin42
    |    Add beta and delta.
    |
    o  1   081603921c3f   2009-04-27 18:04 -0500   durin42
    |    Add gamma
    |
    o  0   d8d2fcd0e319   2009-04-27 18:04 -0500   durin42
         Add alpha
 
 If you run ``hg histedit --outgoing`` on the clone then it is the same
 as running ``hg histedit 836302820282``. If you need plan to push to a
 repository that Mercurial does not detect to be related to the source
 repo, you can add a ``--force`` option.
 """
 
 try:
     import cPickle as pickle
     pickle.dump # import now
 except ImportError:
     import pickle
 import os
 import sys
 
 from mercurial import cmdutil
 from mercurial import discovery
 from mercurial import error
 from mercurial import copies
 from mercurial import context
 from mercurial import hg
 from mercurial import node
 from mercurial import repair
 from mercurial import scmutil
 from mercurial import util
 from mercurial import obsolete
 from mercurial import merge as mergemod
 from mercurial.lock import release
 from mercurial.i18n import _
 
 cmdtable = {}
 command = cmdutil.command(cmdtable)
 
 testedwith = 'internal'
 
 # i18n: command names and abbreviations must remain untranslated
 editcomment = _("""# Edit history between %s and %s
 #
 # Commits are listed from least to most recent
 #
 # Commands:
 #  p, pick = use commit
 #  e, edit = use commit, but stop for amending
 #  f, fold = use commit, but combine it with the one above
+#  r, roll = like fold, but discard this commit's description
 #  d, drop = remove commit from history
 #  m, mess = edit message without changing commit content
 #
 """)
 
 def commitfuncfor(repo, src):
     """Build a commit function for the replacement of <src>
 
     This function ensure we apply the same treatment to all changesets.
 
     - Add a 'histedit_source' entry in extra.
 
     Note that fold have its own separated logic because its handling is a bit
     different and not easily factored out of the fold method.
     """
     phasemin = src.phase()
     def commitfunc(**kwargs):
         phasebackup = repo.ui.backupconfig('phases', 'new-commit')
         try:
             repo.ui.setconfig('phases', 'new-commit', phasemin,
                               'histedit')
             extra = kwargs.get('extra', {}).copy()
             extra['histedit_source'] = src.hex()
             kwargs['extra'] = extra
             return repo.commit(**kwargs)
         finally:
             repo.ui.restoreconfig(phasebackup)
     return commitfunc
 
 def applychanges(ui, repo, ctx, opts):
     """Merge changeset from ctx (only) in the current working directory"""
     wcpar = repo.dirstate.parents()[0]
     if ctx.p1().node() == wcpar:
         # edition ar "in place" we do not need to make any merge,
         # just applies changes on parent for edition
         cmdutil.revert(ui, repo, ctx, (wcpar, node.nullid), all=True)
         stats = None
     else:
         try:
             # ui.forcemerge is an internal variable, do not document
             repo.ui.setconfig('ui', 'forcemerge', opts.get('tool', ''),
                               'histedit')
             stats = mergemod.update(repo, ctx.node(), True, True, False,
                                     ctx.p1().node())
         finally:
             repo.ui.setconfig('ui', 'forcemerge', '', 'histedit')
         repo.setparents(wcpar, node.nullid)
         repo.dirstate.write()
         # fix up dirstate for copies and renames
     cmdutil.duplicatecopies(repo, ctx.rev(), ctx.p1().rev())
     return stats
 
 def collapse(repo, first, last, commitopts):
     """collapse the set of revisions from first to last as new one.
 
     Expected commit options are:
         - message
         - date
         - username
     Commit message is edited in all cases.
 
     This function works in memory."""
     ctxs = list(repo.set('%d::%d', first, last))
     if not ctxs:
         return None
     base = first.parents()[0]
 
     # commit a new version of the old changeset, including the update
     # collect all files which might be affected
     files = set()
     for ctx in ctxs:
         files.update(ctx.files())
 
     # Recompute copies (avoid recording a -> b -> a)
     copied = copies.pathcopies(base, last)
 
     # prune files which were reverted by the updates
     def samefile(f):
         if f in last.manifest():
             a = last.filectx(f)
             if f in base.manifest():
                 b = base.filectx(f)
                 return (a.data() == b.data()
                         and a.flags() == b.flags())
             else:
                 return False
         else:
             return f not in base.manifest()
     files = [f for f in files if not samefile(f)]
     # commit version of these files as defined by head
     headmf = last.manifest()
     def filectxfn(repo, ctx, path):
         if path in headmf:
             fctx = last[path]
             flags = fctx.flags()
             mctx = context.memfilectx(repo,
                                       fctx.path(), fctx.data(),
                                       islink='l' in flags,
                                       isexec='x' in flags,
                                       copied=copied.get(path))
             return mctx
         raise IOError()
 
     if commitopts.get('message'):
         message = commitopts['message']
     else:
         message = first.description()
     user = commitopts.get('user')
     date = commitopts.get('date')
     extra = commitopts.get('extra')
 
     parents = (first.p1().node(), first.p2().node())
+    editor = None
+    if not commitopts.get('rollup'):
     editor = cmdutil.getcommiteditor(edit=True, editform='histedit.fold')
     new = context.memctx(repo,
                          parents=parents,
                          text=message,
                          files=files,
                          filectxfn=filectxfn,
                          user=user,
                          date=date,
                          extra=extra,
                          editor=editor)
     return repo.commitctx(new)
 
 def pick(ui, repo, ctx, ha, opts):
     oldctx = repo[ha]
     if oldctx.parents()[0] == ctx:
         ui.debug('node %s unchanged\n' % ha)
         return oldctx, []
     hg.update(repo, ctx.node())
     stats = applychanges(ui, repo, oldctx, opts)
     if stats and stats[3] > 0:
         raise error.InterventionRequired(_('Fix up the change and run '
                                            'hg histedit --continue'))
     # drop the second merge parent
     commit = commitfuncfor(repo, oldctx)
     n = commit(text=oldctx.description(), user=oldctx.user(),
                date=oldctx.date(), extra=oldctx.extra())
     if n is None:
         ui.warn(_('%s: empty changeset\n')
                      % node.hex(ha))
         return ctx, []
     new = repo[n]
     return new, [(oldctx.node(), (n,))]
 
 
 def edit(ui, repo, ctx, ha, opts):
     oldctx = repo[ha]
     hg.update(repo, ctx.node())
     applychanges(ui, repo, oldctx, opts)
     raise error.InterventionRequired(
         _('Make changes as needed, you may commit or record as needed now.\n'
           'When you are finished, run hg histedit --continue to resume.'))
 
+def rollup(ui, repo, ctx, ha, opts):
+    rollupopts = opts.copy()
+    rollupopts['rollup'] = True
+    return fold(ui, repo, ctx, ha, rollupopts)
+
 def fold(ui, repo, ctx, ha, opts):
     oldctx = repo[ha]
     hg.update(repo, ctx.node())
     stats = applychanges(ui, repo, oldctx, opts)
     if stats and stats[3] > 0:
         raise error.InterventionRequired(
             _('Fix up the change and run hg histedit --continue'))
     n = repo.commit(text='fold-temp-revision %s' % ha, user=oldctx.user(),
                     date=oldctx.date(), extra=oldctx.extra())
     if n is None:
         ui.warn(_('%s: empty changeset')
                      % node.hex(ha))
         return ctx, []
     return finishfold(ui, repo, ctx, oldctx, n, opts, [])
 
 def finishfold(ui, repo, ctx, oldctx, newnode, opts, internalchanges):
     parent = ctx.parents()[0].node()
     hg.update(repo, parent)
     ### prepare new commit data
     commitopts = opts.copy()
     # username
     if ctx.user() == oldctx.user():
         username = ctx.user()
     else:
         username = ui.username()
     commitopts['user'] = username
     # commit message
+    if opts.get('rollup'):
+        newmessage = ctx.description()
+    else:
     newmessage = '\n***\n'.join(
         [ctx.description()] +
         [repo[r].description() for r in internalchanges] +
         [oldctx.description()]) + '\n'
     commitopts['message'] = newmessage
     # date
     commitopts['date'] = max(ctx.date(), oldctx.date())
     extra = ctx.extra().copy()
     # histedit_source
     # note: ctx is likely a temporary commit but that the best we can do here
     #       This is sufficient to solve issue3681 anyway
     extra['histedit_source'] = '%s,%s' % (ctx.hex(), oldctx.hex())
     commitopts['extra'] = extra
     phasebackup = repo.ui.backupconfig('phases', 'new-commit')
     try:
         phasemin = max(ctx.phase(), oldctx.phase())
         repo.ui.setconfig('phases', 'new-commit', phasemin, 'histedit')
         n = collapse(repo, ctx, repo[newnode], commitopts)
     finally:
         repo.ui.restoreconfig(phasebackup)
     if n is None:
         return ctx, []
     hg.update(repo, n)
     replacements = [(oldctx.node(), (newnode,)),
                      (ctx.node(), (n,)),
                      (newnode, (n,)),
                     ]
     for ich in internalchanges:
         replacements.append((ich, (n,)))
     return repo[n], replacements
 
 def drop(ui, repo, ctx, ha, opts):
     return ctx, [(repo[ha].node(), ())]
 
 
 def message(ui, repo, ctx, ha, opts):
     oldctx = repo[ha]
     hg.update(repo, ctx.node())
     stats = applychanges(ui, repo, oldctx, opts)
     if stats and stats[3] > 0:
         raise error.InterventionRequired(
             _('Fix up the change and run hg histedit --continue'))
     message = oldctx.description()
     commit = commitfuncfor(repo, oldctx)
     editor = cmdutil.getcommiteditor(edit=True, editform='histedit.mess')
     new = commit(text=message, user=oldctx.user(), date=oldctx.date(),
                  extra=oldctx.extra(),
                  editor=editor)
     newctx = repo[new]
     if oldctx.node() != newctx.node():
         return newctx, [(oldctx.node(), (new,))]
     # We didn't make an edit, so just indicate no replaced nodes
     return newctx, []
 
 def findoutgoing(ui, repo, remote=None, force=False, opts={}):
     """utility function to find the first outgoing changeset
 
     Used by initialisation code"""
     dest = ui.expandpath(remote or 'default-push', remote or 'default')
     dest, revs = hg.parseurl(dest, None)[:2]
     ui.status(_('comparing with %s\n') % util.hidepassword(dest))
 
     revs, checkout = hg.addbranchrevs(repo, repo, revs, None)
     other = hg.peer(repo, opts, dest)
 
     if revs:
         revs = [repo.lookup(rev) for rev in revs]
 
     outgoing = discovery.findcommonoutgoing(repo, other, revs, force=force)
     if not outgoing.missing:
         raise util.Abort(_('no outgoing ancestors'))
     roots = list(repo.revs("roots(%ln)", outgoing.missing))
     if 1 < len(roots):
         msg = _('there are ambiguous outgoing revisions')
         hint = _('see "hg help histedit" for more detail')
         raise util.Abort(msg, hint=hint)
     return repo.lookup(roots[0])
 
 actiontable = {'p': pick,
                'pick': pick,
                'e': edit,
                'edit': edit,
                'f': fold,
                'fold': fold,
+               'r': rollup,
+               'roll': rollup,
                'd': drop,
                'drop': drop,
                'm': message,
                'mess': message,
                }
 
 @command('histedit',
     [('', 'commands', '',
       _('Read history edits from the specified file.')),
      ('c', 'continue', False, _('continue an edit already in progress')),
      ('k', 'keep', False,
       _("don't strip old nodes after edit is complete")),
      ('', 'abort', False, _('abort an edit in progress')),
      ('o', 'outgoing', False, _('changesets not found in destination')),
      ('f', 'force', False,
       _('force outgoing even for unrelated repositories')),
      ('r', 'rev', [], _('first revision to be edited'))],
      _("ANCESTOR | --outgoing [URL]"))
 def histedit(ui, repo, *freeargs, **opts):
     """interactively edit changeset history
 
     This command edits changesets between ANCESTOR and the parent of
     the working directory.
 
     With --outgoing, this edits changesets not found in the
     destination repository. If URL of the destination is omitted, the
     'default-push' (or 'default') path will be used.
 
     For safety, this command is aborted, also if there are ambiguous
     outgoing revisions which may confuse users: for example, there are
     multiple branches containing outgoing revisions.
 
     Use "min(outgoing() and ::.)" or similar revset specification
     instead of --outgoing to specify edit target revision exactly in
     such ambiguous situation. See :hg:`help revsets` for detail about
     selecting revisions.
 
     Returns 0 on success, 1 if user intervention is required (not only
     for intentional "edit" command, but also for resolving unexpected
     conflicts).
     """
     lock = wlock = None
     try:
         wlock = repo.wlock()
         lock = repo.lock()
         _histedit(ui, repo, *freeargs, **opts)
     finally:
         release(lock, wlock)
 
 def _histedit(ui, repo, *freeargs, **opts):
     # TODO only abort if we try and histedit mq patches, not just
     # blanket if mq patches are applied somewhere
     mq = getattr(repo, 'mq', None)
     if mq and mq.applied:
         raise util.Abort(_('source has mq patches applied'))
 
     # basic argument incompatibility processing
     outg = opts.get('outgoing')
     cont = opts.get('continue')
     abort = opts.get('abort')
     force = opts.get('force')
     rules = opts.get('commands', '')
     revs = opts.get('rev', [])
     goal = 'new' # This invocation goal, in new, continue, abort
     if force and not outg:
         raise util.Abort(_('--force only allowed with --outgoing'))
     if cont:
         if util.any((outg, abort, revs, freeargs, rules)):
             raise util.Abort(_('no arguments allowed with --continue'))
         goal = 'continue'
     elif abort:
         if util.any((outg, revs, freeargs, rules)):
             raise util.Abort(_('no arguments allowed with --abort'))
         goal = 'abort'
     else:
         if os.path.exists(os.path.join(repo.path, 'histedit-state')):
             raise util.Abort(_('history edit already in progress, try '
                                '--continue or --abort'))
         if outg:
             if revs:
                 raise util.Abort(_('no revisions allowed with --outgoing'))
             if len(freeargs) > 1:
                 raise util.Abort(
                     _('only one repo argument allowed with --outgoing'))
         else:
             revs.extend(freeargs)
             if len(revs) != 1:
                 raise util.Abort(
                     _('histedit requires exactly one ancestor revision'))
 
 
     if goal == 'continue':
         (parentctxnode, rules, keep, topmost, replacements) = readstate(repo)
         parentctx = repo[parentctxnode]
         parentctx, repl = bootstrapcontinue(ui, repo, parentctx, rules, opts)
         replacements.extend(repl)
     elif goal == 'abort':
         (parentctxnode, rules, keep, topmost, replacements) = readstate(repo)
         mapping, tmpnodes, leafs, _ntm = processreplacement(repo, replacements)
         ui.debug('restore wc to old parent %s\n' % node.short(topmost))
         # check whether we should update away
         parentnodes = [c.node() for c in repo[None].parents()]
         for n in leafs | set([parentctxnode]):
             if n in parentnodes:
                 hg.clean(repo, topmost)
                 break
         else:
             pass
         cleanupnode(ui, repo, 'created', tmpnodes)
         cleanupnode(ui, repo, 'temp', leafs)
         os.unlink(os.path.join(repo.path, 'histedit-state'))
         return
     else:
         cmdutil.checkunfinished(repo)
         cmdutil.bailifchanged(repo)
 
         topmost, empty = repo.dirstate.parents()
         if outg:
             if freeargs:
                 remote = freeargs[0]
             else:
                 remote = None
             root = findoutgoing(ui, repo, remote, force, opts)
         else:
             rr = list(repo.set('roots(%ld)', scmutil.revrange(repo, revs)))
             if len(rr) != 1:
                 raise util.Abort(_('The specified revisions must have '
                     'exactly one common root'))
             root = rr[0].node()
 
         keep = opts.get('keep', False)
         revs = between(repo, root, topmost, keep)
         if not revs:
             raise util.Abort(_('%s is not an ancestor of working directory') %
                              node.short(root))
 
         ctxs = [repo[r] for r in revs]
         if not rules:
             rules = '\n'.join([makedesc(c) for c in ctxs])
             rules += '\n\n'
             rules += editcomment % (node.short(root), node.short(topmost))
             rules = ui.edit(rules, ui.username())
             # Save edit rules in .hg/histedit-last-edit.txt in case
             # the user needs to ask for help after something
             # surprising happens.
             f = open(repo.join('histedit-last-edit.txt'), 'w')
             f.write(rules)
             f.close()
         else:
             if rules == '-':
                 f = sys.stdin
             else:
                 f = open(rules)
             rules = f.read()
             f.close()
         rules = [l for l in (r.strip() for r in rules.splitlines())
                  if l and not l[0] == '#']
         rules = verifyrules(rules, repo, ctxs)
 
         parentctx = repo[root].parents()[0]
         keep = opts.get('keep', False)
         replacements = []
 
 
     while rules:
         writestate(repo, parentctx.node(), rules, keep, topmost, replacements)
         action, ha = rules.pop(0)
         ui.debug('histedit: processing %s %s\n' % (action, ha))
         actfunc = actiontable[action]
         parentctx, replacement_ = actfunc(ui, repo, parentctx, ha, opts)
         replacements.extend(replacement_)
 
     hg.update(repo, parentctx.node())
 
     mapping, tmpnodes, created, ntm = processreplacement(repo, replacements)
     if mapping:
         for prec, succs in mapping.iteritems():
             if not succs:
                 ui.debug('histedit: %s is dropped\n' % node.short(prec))
             else:
                 ui.debug('histedit: %s is replaced by %s\n' % (
                     node.short(prec), node.short(succs[0])))
                 if len(succs) > 1:
                     m = 'histedit:                            %s'
                     for n in succs[1:]:
                         ui.debug(m % node.short(n))
 
     if not keep:
         if mapping:
             movebookmarks(ui, repo, mapping, topmost, ntm)
             # TODO update mq state
         if obsolete._enabled:
             markers = []
             # sort by revision number because it sound "right"
             for prec in sorted(mapping, key=repo.changelog.rev):
                 succs = mapping[prec]
                 markers.append((repo[prec],
                                 tuple(repo[s] for s in succs)))
             if markers:
                 obsolete.createmarkers(repo, markers)
         else:
             cleanupnode(ui, repo, 'replaced', mapping)
 
     cleanupnode(ui, repo, 'temp', tmpnodes)
     os.unlink(os.path.join(repo.path, 'histedit-state'))
     if os.path.exists(repo.sjoin('undo')):
         os.unlink(repo.sjoin('undo'))
 
 def gatherchildren(repo, ctx):
     # is there any new commit between the expected parent and "."
     #
     # note: does not take non linear new change in account (but previous
     #       implementation didn't used them anyway (issue3655)
     newchildren = [c.node() for c in repo.set('(%d::.)', ctx)]
     if ctx.node() != node.nullid:
         if not newchildren:
             # `ctx` should match but no result. This means that
             # currentnode is not a descendant from ctx.
             msg = _('%s is not an ancestor of working directory')
             hint = _('use "histedit --abort" to clear broken state')
             raise util.Abort(msg % ctx, hint=hint)
         newchildren.pop(0)  # remove ctx
     return newchildren
 
 def bootstrapcontinue(ui, repo, parentctx, rules, opts):
     action, currentnode = rules.pop(0)
     ctx = repo[currentnode]
 
     newchildren = gatherchildren(repo, parentctx)
 
     # Commit dirty working directory if necessary
     new = None
     m, a, r, d = repo.status()[:4]
     if m or a or r or d:
         # prepare the message for the commit to comes
-        if action in ('f', 'fold'):
+        if action in ('f', 'fold', 'r', 'roll'):
             message = 'fold-temp-revision %s' % currentnode
         else:
             message = ctx.description()
         editopt = action in ('e', 'edit', 'm', 'mess')
         canonaction = {'e': 'edit', 'm': 'mess', 'p': 'pick'}
         editform = 'histedit.%s' % canonaction.get(action, action)
         editor = cmdutil.getcommiteditor(edit=editopt, editform=editform)
         commit = commitfuncfor(repo, ctx)
         new = commit(text=message, user=ctx.user(),
                      date=ctx.date(), extra=ctx.extra(),
                      editor=editor)
         if new is not None:
             newchildren.append(new)
 
     replacements = []
     # track replacements
     if ctx.node() not in newchildren:
         # note: new children may be empty when the changeset is dropped.
         # this happen e.g during conflicting pick where we revert content
         # to parent.
         replacements.append((ctx.node(), tuple(newchildren)))
 
-    if action in ('f', 'fold'):
+    if action in ('f', 'fold', 'r', 'roll'):
         if newchildren:
             # finalize fold operation if applicable
             if new is None:
                 new = newchildren[-1]
             else:
                 newchildren.pop()  # remove new from internal changes
-            parentctx, repl = finishfold(ui, repo, parentctx, ctx, new, opts,
-                                         newchildren)
+            foldopts = opts
+            if action in ('r', 'roll'):
+                foldopts = foldopts.copy()
+                foldopts['rollup'] = True
+            parentctx, repl = finishfold(ui, repo, parentctx, ctx, new,
+                                         foldopts, newchildren)
             replacements.extend(repl)
         else:
             # newchildren is empty if the fold did not result in any commit
             # this happen when all folded change are discarded during the
             # merge.
             replacements.append((ctx.node(), (parentctx.node(),)))
     elif newchildren:
         # otherwise update "parentctx" before proceeding to further operation
         parentctx = repo[newchildren[-1]]
     return parentctx, replacements
 
 
 def between(repo, old, new, keep):
     """select and validate the set of revision to edit
 
     When keep is false, the specified set can't have children."""
     ctxs = list(repo.set('%n::%n', old, new))
     if ctxs and not keep:
         if (not obsolete._enabled and
             repo.revs('(%ld::) - (%ld)', ctxs, ctxs)):
             raise util.Abort(_('cannot edit history that would orphan nodes'))
         if repo.revs('(%ld) and merge()', ctxs):
             raise util.Abort(_('cannot edit history that contains merges'))
         root = ctxs[0] # list is already sorted by repo.set
         if not root.phase():
             raise util.Abort(_('cannot edit immutable changeset: %s') % root)
     return [c.node() for c in ctxs]
 
 
 def writestate(repo, parentnode, rules, keep, topmost, replacements):
     fp = open(os.path.join(repo.path, 'histedit-state'), 'w')
     pickle.dump((parentnode, rules, keep, topmost, replacements), fp)
     fp.close()
 
 def readstate(repo):
     """Returns a tuple of (parentnode, rules, keep, topmost, replacements).
     """
     fp = open(os.path.join(repo.path, 'histedit-state'))
     return pickle.load(fp)
 
 
 def makedesc(c):
     """build a initial action line for a ctx `c`
 
     line are in the form:
 
       pick <hash> <rev> <summary>
     """
     summary = ''
     if c.description():
         summary = c.description().splitlines()[0]
     line = 'pick %s %d %s' % (c, c.rev(), summary)
     # trim to 80 columns so it's not stupidly wide in my editor
     return util.ellipsis(line, 80)
 
 def verifyrules(rules, repo, ctxs):
     """Verify that there exists exactly one edit rule per given changeset.
 
     Will abort if there are to many or too few rules, a malformed rule,
     or a rule on a changeset outside of the user-given range.
     """
     parsed = []
     expected = set(str(c) for c in ctxs)
     seen = set()
     for r in rules:
         if ' ' not in r:
             raise util.Abort(_('malformed line "%s"') % r)
         action, rest = r.split(' ', 1)
         ha = rest.strip().split(' ', 1)[0]
         try:
             ha = str(repo[ha])  # ensure its a short hash
         except error.RepoError:
             raise util.Abort(_('unknown changeset %s listed') % ha)
         if ha not in expected:
             raise util.Abort(
                 _('may not use changesets other than the ones listed'))
         if ha in seen:
             raise util.Abort(_('duplicated command for changeset %s') % ha)
         seen.add(ha)
         if action not in actiontable:
             raise util.Abort(_('unknown action "%s"') % action)
         parsed.append([action, ha])
     missing = sorted(expected - seen)  # sort to stabilize output
     if missing:
         raise util.Abort(_('missing rules for changeset %s') % missing[0],
                          hint=_('do you want to use the drop action?'))
     return parsed
 
 def processreplacement(repo, replacements):
     """process the list of replacements to return
 
     1) the final mapping between original and created nodes
     2) the list of temporary node created by histedit
     3) the list of new commit created by histedit"""
     allsuccs = set()
     replaced = set()
     fullmapping = {}
     # initialise basic set
     # fullmapping record all operation recorded in replacement
     for rep in replacements:
         allsuccs.update(rep[1])
         replaced.add(rep[0])
         fullmapping.setdefault(rep[0], set()).update(rep[1])
     new = allsuccs - replaced
     tmpnodes = allsuccs & replaced
     # Reduce content fullmapping  into direct relation between original nodes
     # and final node created during history edition
     # Dropped changeset are replaced by an empty list
     toproceed = set(fullmapping)
     final = {}
     while toproceed:
         for x in list(toproceed):
             succs = fullmapping[x]
             for s in list(succs):
                 if s in toproceed:
                     # non final node with unknown closure
                     # We can't process this now
                     break
                 elif s in final:
                     # non final node, replace with closure
                     succs.remove(s)
                     succs.update(final[s])
             else:
                 final[x] = succs
                 toproceed.remove(x)
     # remove tmpnodes from final mapping
     for n in tmpnodes:
         del final[n]
     # we expect all changes involved in final to exist in the repo
     # turn `final` into list (topologically sorted)
     nm = repo.changelog.nodemap
     for prec, succs in final.items():
         final[prec] = sorted(succs, key=nm.get)
 
     # computed topmost element (necessary for bookmark)
     if new:
         newtopmost = sorted(new, key=repo.changelog.rev)[-1]
     elif not final:
         # Nothing rewritten at all. we won't need `newtopmost`
         # It is the same as `oldtopmost` and `processreplacement` know it
         newtopmost = None
     else:
         # every body died. The newtopmost is the parent of the root.
         newtopmost = repo[sorted(final, key=repo.changelog.rev)[0]].p1().node()
 
     return final, tmpnodes, new, newtopmost
 
 def movebookmarks(ui, repo, mapping, oldtopmost, newtopmost):
     """Move bookmark from old to newly created node"""
     if not mapping:
         # if nothing got rewritten there is not purpose for this function
         return
     moves = []
     for bk, old in sorted(repo._bookmarks.iteritems()):
         if old == oldtopmost:
             # special case ensure bookmark stay on tip.
             #
             # This is arguably a feature and we may only want that for the
             # active bookmark. But the behavior is kept compatible with the old
             # version for now.
             moves.append((bk, newtopmost))
             continue
         base = old
         new = mapping.get(base, None)
         if new is None:
             continue
         while not new:
             # base is killed, trying with parent
             base = repo[base].p1().node()
             new = mapping.get(base, (base,))
             # nothing to move
         moves.append((bk, new[-1]))
     if moves:
         marks = repo._bookmarks
         for mark, new in moves:
             old = marks[mark]
             ui.note(_('histedit: moving bookmarks %s from %s to %s\n')
                     % (mark, node.short(old), node.short(new)))
             marks[mark] = new
         marks.write()
 
 def cleanupnode(ui, repo, name, nodes):
     """strip a group of nodes from the repository
 
     The set of node to strip may contains unknown nodes."""
     ui.debug('should strip %s nodes %s\n' %
              (name, ', '.join([node.short(n) for n in nodes])))
     lock = None
     try:
         lock = repo.lock()
         # Find all node that need to be stripped
         # (we hg %lr instead of %ln to silently ignore unknown item
         nm = repo.changelog.nodemap
         nodes = [n for n in nodes if n in nm]
         roots = [c.node() for c in repo.set("roots(%ln)", nodes)]
         for c in roots:
             # We should process node in reverse order to strip tip most first.
             # but this trigger a bug in changegroup hook.
             # This would reduce bundle overhead
             repair.strip(ui, repo, c)
     finally:
         release(lock)
 
 def summaryhook(ui, repo):
     if not os.path.exists(repo.join('histedit-state')):
         return
     (parentctxnode, rules, keep, topmost, replacements) = readstate(repo)
     if rules:
         # i18n: column positioning for "hg summary"
         ui.write(_('hist:   %s (histedit --continue)\n') %
                  (ui.label(_('%d remaining'), 'histedit.remaining') %
                   len(rules)))
 
 def extsetup(ui):
     cmdutil.summaryhooks.add('histedit', summaryhook)
     cmdutil.unfinishedstates.append(
         ['histedit-state', False, True, _('histedit in progress'),
          _("use 'hg histedit --continue' or 'hg histedit --abort'")])

tests/test-histedit-arguments.t

@@ -1,261 +1,263
 Test argument handling and various data parsing
 ==================================================
 
 
 Enable extensions used by this test.
   $ cat >>$HGRCPATH <<EOF
   > [extensions]
   > histedit=
   > EOF
 
 Repo setup.
   $ hg init foo
   $ cd foo
   $ echo alpha >> alpha
   $ hg addr
   adding alpha
   $ hg ci -m one
   $ echo alpha >> alpha
   $ hg ci -m two
   $ echo alpha >> alpha
   $ hg ci -m three
   $ echo alpha >> alpha
   $ hg ci -m four
   $ echo alpha >> alpha
   $ hg ci -m five
 
   $ hg log --style compact --graph
   @  4[tip]   08d98a8350f3   1970-01-01 00:00 +0000   test
   |    five
   |
   o  3   c8e68270e35a   1970-01-01 00:00 +0000   test
   |    four
   |
   o  2   eb57da33312f   1970-01-01 00:00 +0000   test
   |    three
   |
   o  1   579e40513370   1970-01-01 00:00 +0000   test
   |    two
   |
   o  0   6058cbb6cfd7   1970-01-01 00:00 +0000   test
        one
   
 
 Run a dummy edit to make sure we get tip^^ correctly via revsingle.
 --------------------------------------------------------------------
 
   $ HGEDITOR=cat hg histedit "tip^^"
   pick eb57da33312f 2 three
   pick c8e68270e35a 3 four
   pick 08d98a8350f3 4 five
   
   # Edit history between eb57da33312f and 08d98a8350f3
   #
   # Commits are listed from least to most recent
   #
   # Commands:
   #  p, pick = use commit
   #  e, edit = use commit, but stop for amending
   #  f, fold = use commit, but combine it with the one above
+  #  r, roll = like fold, but discard this commit's description
   #  d, drop = remove commit from history
   #  m, mess = edit message without changing commit content
   #
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
 Run on a revision not ancestors of the current working directory.
 --------------------------------------------------------------------
 
   $ hg up 2
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg histedit -r 4
   abort: 08d98a8350f3 is not an ancestor of working directory
   [255]
   $ hg up --quiet
 
 
 Test that we pick the minimum of a revrange
 ---------------------------------------
 
   $ HGEDITOR=cat hg histedit '2::' --commands - << EOF
   > pick eb57da33312f 2 three
   > pick c8e68270e35a 3 four
   > pick 08d98a8350f3 4 five
   > EOF
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg up --quiet
 
   $ HGEDITOR=cat hg histedit 'tip:2' --commands - << EOF
   > pick eb57da33312f 2 three
   > pick c8e68270e35a 3 four
   > pick 08d98a8350f3 4 five
   > EOF
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg up --quiet
 
 Run on a revision not descendants of the initial parent
 --------------------------------------------------------------------
 
 Test the message shown for inconsistent histedit state, which may be
 created (and forgotten) by Mercurial earlier than 2.7. This emulates
 Mercurial earlier than 2.7 by renaming ".hg/histedit-state"
 temporarily.
 
   $ HGEDITOR=cat hg histedit -r 4 --commands - << EOF
   > edit 08d98a8350f3 4 five
   > EOF
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   reverting alpha
   Make changes as needed, you may commit or record as needed now.
   When you are finished, run hg histedit --continue to resume.
   [1]
 
   $ mv .hg/histedit-state .hg/histedit-state.back
   $ hg update --quiet --clean 2
   $ mv .hg/histedit-state.back .hg/histedit-state
 
   $ hg histedit --continue
   abort: c8e68270e35a is not an ancestor of working directory
   (use "histedit --abort" to clear broken state)
   [255]
 
   $ hg histedit --abort
   $ hg update --quiet --clean
 
 Test that missing revisions are detected
 ---------------------------------------
 
   $ HGEDITOR=cat hg histedit "tip^^" --commands - << EOF
   > pick eb57da33312f 2 three
   > pick 08d98a8350f3 4 five
   > EOF
   abort: missing rules for changeset c8e68270e35a
   (do you want to use the drop action?)
   [255]
 
 Test that extra revisions are detected
 ---------------------------------------
 
   $ HGEDITOR=cat hg histedit "tip^^" --commands - << EOF
   > pick 6058cbb6cfd7 0 one
   > pick c8e68270e35a 3 four
   > pick 08d98a8350f3 4 five
   > EOF
   abort: may not use changesets other than the ones listed
   [255]
 
 Test malformed line
 ---------------------------------------
 
   $ HGEDITOR=cat hg histedit "tip^^" --commands - << EOF
   > pickeb57da33312f2three
   > pick c8e68270e35a 3 four
   > pick 08d98a8350f3 4 five
   > EOF
   abort: malformed line "pickeb57da33312f2three"
   [255]
 
 Test unknown changeset
 ---------------------------------------
 
   $ HGEDITOR=cat hg histedit "tip^^" --commands - << EOF
   > pick 0123456789ab 2 three
   > pick c8e68270e35a 3 four
   > pick 08d98a8350f3 4 five
   > EOF
   abort: unknown changeset 0123456789ab listed
   [255]
 
 Test unknown command
 ---------------------------------------
 
   $ HGEDITOR=cat hg histedit "tip^^" --commands - << EOF
   > coin eb57da33312f 2 three
   > pick c8e68270e35a 3 four
   > pick 08d98a8350f3 4 five
   > EOF
   abort: unknown action "coin"
   [255]
 
 Test duplicated changeset
 ---------------------------------------
 
 So one is missing and one appear twice.
 
   $ HGEDITOR=cat hg histedit "tip^^" --commands - << EOF
   > pick eb57da33312f 2 three
   > pick eb57da33312f 2 three
   > pick 08d98a8350f3 4 five
   > EOF
   abort: duplicated command for changeset eb57da33312f
   [255]
 
 Test short version of command
 ---------------------------------------
 
 Note: we use varying amounts of white space between command name and changeset
 short hash. This tests issue3893.
 
   $ HGEDITOR=cat hg histedit "tip^^" --commands - << EOF
   > pick eb57da33312f 2 three
   > p    c8e68270e35a 3 four
   > f 08d98a8350f3 4 five
   > EOF
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   reverting alpha
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   four
   ***
   five
   
   
   
   HG: Enter commit message.  Lines beginning with 'HG:' are removed.
   HG: Leave message empty to abort commit.
   HG: --
   HG: user: test
   HG: branch 'default'
   HG: changed alpha
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   saved backup bundle to $TESTTMP/foo/.hg/strip-backup/*-backup.hg (glob)
 
   $ hg update -q 2
   $ echo x > x
   $ hg add x
   $ hg commit -m'x' x
   created new head
   $ hg histedit -r 'heads(all())'
   abort: The specified revisions must have exactly one common root
   [255]
 
 Test that trimming description using multi-byte characters
 --------------------------------------------------------------------
 
   $ python <<EOF
   > fp = open('logfile', 'w')
   > fp.write('12345678901234567890123456789012345678901234567890' +
   >          '12345') # there are 5 more columns for 80 columns
   > 
   > # 2 x 4 = 8 columns, but 3 x 4 = 12 bytes
   > fp.write(u'\u3042\u3044\u3046\u3048'.encode('utf-8'))
   > 
   > fp.close()
   > EOF
   $ echo xx >> x
   $ hg --encoding utf-8 commit --logfile logfile
 
   $ HGEDITOR=cat hg --encoding utf-8 histedit tip
   pick 3d3ea1f3a10b 5 1234567890123456789012345678901234567890123456789012345\xe3\x81\x82... (esc)
   
   # Edit history between 3d3ea1f3a10b and 3d3ea1f3a10b
   #
   # Commits are listed from least to most recent
   #
   # Commands:
   #  p, pick = use commit
   #  e, edit = use commit, but stop for amending
   #  f, fold = use commit, but combine it with the one above
+  #  r, roll = like fold, but discard this commit's description
   #  d, drop = remove commit from history
   #  m, mess = edit message without changing commit content
   #
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved

tests/test-histedit-bookmark-motion.t

@@ -1,180 +1,182
   $ . "$TESTDIR/histedit-helpers.sh"
 
   $ cat >> $HGRCPATH <<EOF
   > [extensions]
   > histedit=
   > EOF
 
   $ hg init r
   $ cd r
 
   $ for x in a b c d e f ; do
   >     echo $x > $x
   >     hg add $x
   >     hg ci -m $x
   > done
 
   $ hg book -r 1 will-move-backwards
   $ hg book -r 2 two
   $ hg book -r 2 also-two
   $ hg book -r 3 three
   $ hg book -r 4 four
   $ hg book -r tip five
   $ hg log --graph
   @  changeset:   5:652413bf663e
   |  bookmark:    five
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     f
   |
   o  changeset:   4:e860deea161a
   |  bookmark:    four
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     e
   |
   o  changeset:   3:055a42cdd887
   |  bookmark:    three
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     d
   |
   o  changeset:   2:177f92b77385
   |  bookmark:    also-two
   |  bookmark:    two
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     c
   |
   o  changeset:   1:d2ae7f538514
   |  bookmark:    will-move-backwards
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     b
   |
   o  changeset:   0:cb9a9f314b8b
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     a
   
   $ HGEDITOR=cat hg histedit 1
   pick d2ae7f538514 1 b
   pick 177f92b77385 2 c
   pick 055a42cdd887 3 d
   pick e860deea161a 4 e
   pick 652413bf663e 5 f
   
   # Edit history between d2ae7f538514 and 652413bf663e
   #
   # Commits are listed from least to most recent
   #
   # Commands:
   #  p, pick = use commit
   #  e, edit = use commit, but stop for amending
   #  f, fold = use commit, but combine it with the one above
+  #  r, roll = like fold, but discard this commit's description
   #  d, drop = remove commit from history
   #  m, mess = edit message without changing commit content
   #
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg histedit 1 --commands - --verbose << EOF | grep histedit
   > pick 177f92b77385 2 c
   > drop d2ae7f538514 1 b
   > pick 055a42cdd887 3 d
   > fold e860deea161a 4 e
   > pick 652413bf663e 5 f
   > EOF
   histedit: moving bookmarks also-two from 177f92b77385 to b346ab9a313d
   histedit: moving bookmarks five from 652413bf663e to cacdfd884a93
   histedit: moving bookmarks four from e860deea161a to 59d9f330561f
   histedit: moving bookmarks three from 055a42cdd887 to 59d9f330561f
   histedit: moving bookmarks two from 177f92b77385 to b346ab9a313d
   histedit: moving bookmarks will-move-backwards from d2ae7f538514 to cb9a9f314b8b
   saved backup bundle to $TESTTMP/r/.hg/strip-backup/d2ae7f538514-backup.hg (glob)
   saved backup bundle to $TESTTMP/r/.hg/strip-backup/96e494a2d553-backup.hg (glob)
   $ hg log --graph
   @  changeset:   3:cacdfd884a93
   |  bookmark:    five
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     f
   |
   o  changeset:   2:59d9f330561f
   |  bookmark:    four
   |  bookmark:    three
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     d
   |
   o  changeset:   1:b346ab9a313d
   |  bookmark:    also-two
   |  bookmark:    two
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     c
   |
   o  changeset:   0:cb9a9f314b8b
      bookmark:    will-move-backwards
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     a
   
   $ HGEDITOR=cat hg histedit 1
   pick b346ab9a313d 1 c
   pick 59d9f330561f 2 d
   pick cacdfd884a93 3 f
   
   # Edit history between b346ab9a313d and cacdfd884a93
   #
   # Commits are listed from least to most recent
   #
   # Commands:
   #  p, pick = use commit
   #  e, edit = use commit, but stop for amending
   #  f, fold = use commit, but combine it with the one above
+  #  r, roll = like fold, but discard this commit's description
   #  d, drop = remove commit from history
   #  m, mess = edit message without changing commit content
   #
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg histedit 1 --commands - --verbose << EOF | grep histedit
   > pick b346ab9a313d 1 c
   > pick cacdfd884a93 3 f
   > pick 59d9f330561f 2 d
   > EOF
   histedit: moving bookmarks five from cacdfd884a93 to c04e50810e4b
   histedit: moving bookmarks four from 59d9f330561f to c04e50810e4b
   histedit: moving bookmarks three from 59d9f330561f to c04e50810e4b
   saved backup bundle to $TESTTMP/r/.hg/strip-backup/59d9f330561f-backup.hg (glob)
 
 We expect 'five' to stay at tip, since the tipmost bookmark is most
 likely the useful signal.
 
   $ hg log --graph
   @  changeset:   3:c04e50810e4b
   |  bookmark:    five
   |  bookmark:    four
   |  bookmark:    three
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     d
   |
   o  changeset:   2:c13eb81022ca
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     f
   |
   o  changeset:   1:b346ab9a313d
   |  bookmark:    also-two
   |  bookmark:    two
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     c
   |
   o  changeset:   0:cb9a9f314b8b
      bookmark:    will-move-backwards
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     a
   

tests/test-histedit-commute.t

@@ -1,382 +1,384
   $ . "$TESTDIR/histedit-helpers.sh"
 
   $ cat >> $HGRCPATH <<EOF
   > [extensions]
   > histedit=
   > EOF
 
   $ initrepo ()
   > {
   >     hg init r
   >     cd r
   >     for x in a b c d e f ; do
   >         echo $x > $x
   >         hg add $x
   >         hg ci -m $x
   >     done
   > }
 
   $ initrepo
 
 log before edit
   $ hg log --graph
   @  changeset:   5:652413bf663e
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     f
   |
   o  changeset:   4:e860deea161a
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     e
   |
   o  changeset:   3:055a42cdd887
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     d
   |
   o  changeset:   2:177f92b77385
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     c
   |
   o  changeset:   1:d2ae7f538514
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     b
   |
   o  changeset:   0:cb9a9f314b8b
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     a
   
 
 show the edit commands offered
   $ HGEDITOR=cat hg histedit 177f92b77385
   pick 177f92b77385 2 c
   pick 055a42cdd887 3 d
   pick e860deea161a 4 e
   pick 652413bf663e 5 f
   
   # Edit history between 177f92b77385 and 652413bf663e
   #
   # Commits are listed from least to most recent
   #
   # Commands:
   #  p, pick = use commit
   #  e, edit = use commit, but stop for amending
   #  f, fold = use commit, but combine it with the one above
+  #  r, roll = like fold, but discard this commit's description
   #  d, drop = remove commit from history
   #  m, mess = edit message without changing commit content
   #
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
 edit the history
 (use a hacky editor to check histedit-last-edit.txt backup)
 
   $ EDITED="$TESTTMP/editedhistory"
   $ cat > $EDITED <<EOF
   > pick 177f92b77385 c
   > pick e860deea161a e
   > pick 652413bf663e f
   > pick 055a42cdd887 d
   > EOF
   $ HGEDITOR="cat \"$EDITED\" > " hg histedit 177f92b77385 2>&1 | fixbundle
   0 files updated, 0 files merged, 3 files removed, 0 files unresolved
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
 rules should end up in .hg/histedit-last-edit.txt:
   $ cat .hg/histedit-last-edit.txt
   pick 177f92b77385 c
   pick e860deea161a e
   pick 652413bf663e f
   pick 055a42cdd887 d
 
 log after edit
   $ hg log --graph
   @  changeset:   5:07114f51870f
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     d
   |
   o  changeset:   4:8ade9693061e
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     f
   |
   o  changeset:   3:d8249471110a
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     e
   |
   o  changeset:   2:177f92b77385
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     c
   |
   o  changeset:   1:d2ae7f538514
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     b
   |
   o  changeset:   0:cb9a9f314b8b
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     a
   
 
 put things back
 
   $ hg histedit 177f92b77385 --commands - 2>&1 << EOF | fixbundle
   > pick 177f92b77385 c
   > pick 07114f51870f d
   > pick d8249471110a e
   > pick 8ade9693061e f
   > EOF
   0 files updated, 0 files merged, 3 files removed, 0 files unresolved
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
   $ hg log --graph
   @  changeset:   5:7eca9b5b1148
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     f
   |
   o  changeset:   4:915da888f2de
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     e
   |
   o  changeset:   3:10517e47bbbb
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     d
   |
   o  changeset:   2:177f92b77385
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     c
   |
   o  changeset:   1:d2ae7f538514
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     b
   |
   o  changeset:   0:cb9a9f314b8b
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     a
   
 
 slightly different this time
 
   $ hg histedit 177f92b77385 --commands - << EOF 2>&1 | fixbundle
   > pick 10517e47bbbb d
   > pick 7eca9b5b1148 f
   > pick 915da888f2de e
   > pick 177f92b77385 c
   > EOF
   0 files updated, 0 files merged, 4 files removed, 0 files unresolved
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg log --graph
   @  changeset:   5:38b92f448761
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     c
   |
   o  changeset:   4:de71b079d9ce
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     e
   |
   o  changeset:   3:be9ae3a309c6
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     f
   |
   o  changeset:   2:799205341b6b
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     d
   |
   o  changeset:   1:d2ae7f538514
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     b
   |
   o  changeset:   0:cb9a9f314b8b
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     a
   
 
 keep prevents stripping dead revs
   $ hg histedit 799205341b6b --keep --commands - 2>&1 << EOF | fixbundle
   > pick 799205341b6b d
   > pick be9ae3a309c6 f
   > pick 38b92f448761 c
   > pick de71b079d9ce e
   > EOF
   0 files updated, 0 files merged, 2 files removed, 0 files unresolved
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg log --graph
   @  changeset:   7:803ef1c6fcfd
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     e
   |
   o  changeset:   6:ece0b8d93dda
   |  parent:      3:be9ae3a309c6
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     c
   |
   | o  changeset:   5:38b92f448761
   | |  user:        test
   | |  date:        Thu Jan 01 00:00:00 1970 +0000
   | |  summary:     c
   | |
   | o  changeset:   4:de71b079d9ce
   |/   user:        test
   |    date:        Thu Jan 01 00:00:00 1970 +0000
   |    summary:     e
   |
   o  changeset:   3:be9ae3a309c6
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     f
   |
   o  changeset:   2:799205341b6b
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     d
   |
   o  changeset:   1:d2ae7f538514
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     b
   |
   o  changeset:   0:cb9a9f314b8b
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     a
   
 
 try with --rev
   $ hg histedit --commands - --rev -2 2>&1 <<EOF | fixbundle
   > pick de71b079d9ce e
   > pick 38b92f448761 c
   > EOF
   abort: may not use changesets other than the ones listed
   $ hg log --graph
   @  changeset:   7:803ef1c6fcfd
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     e
   |
   o  changeset:   6:ece0b8d93dda
   |  parent:      3:be9ae3a309c6
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     c
   |
   | o  changeset:   5:38b92f448761
   | |  user:        test
   | |  date:        Thu Jan 01 00:00:00 1970 +0000
   | |  summary:     c
   | |
   | o  changeset:   4:de71b079d9ce
   |/   user:        test
   |    date:        Thu Jan 01 00:00:00 1970 +0000
   |    summary:     e
   |
   o  changeset:   3:be9ae3a309c6
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     f
   |
   o  changeset:   2:799205341b6b
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     d
   |
   o  changeset:   1:d2ae7f538514
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     b
   |
   o  changeset:   0:cb9a9f314b8b
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     a
   
 Verify that revsetalias entries work with histedit:
   $ cat >> $HGRCPATH <<EOF
   > [revsetalias]
   > grandparent(ARG) = p1(p1(ARG))
   > EOF
   $ echo extra commit >> c
   $ hg ci -m 'extra commit to c'
   $ HGEDITOR=cat hg histedit 'grandparent(.)'
   pick ece0b8d93dda 6 c
   pick 803ef1c6fcfd 7 e
   pick 9c863c565126 8 extra commit to c
   
   # Edit history between ece0b8d93dda and 9c863c565126
   #
   # Commits are listed from least to most recent
   #
   # Commands:
   #  p, pick = use commit
   #  e, edit = use commit, but stop for amending
   #  f, fold = use commit, but combine it with the one above
+  #  r, roll = like fold, but discard this commit's description
   #  d, drop = remove commit from history
   #  m, mess = edit message without changing commit content
   #
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
 should also work if a commit message is missing
   $ BUNDLE="$TESTDIR/missing-comment.hg"
   $ hg init missing
   $ cd missing
   $ hg unbundle $BUNDLE
   adding changesets
   adding manifests
   adding file changes
   added 3 changesets with 3 changes to 1 files
   (run 'hg update' to get a working copy)
   $ hg co tip
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg log --graph
   @  changeset:   2:bd22688093b3
   |  tag:         tip
   |  user:        Robert Altman <[e-mail]>
   |  date:        Mon Nov 28 16:40:04 2011 +0000
   |  summary:     Update file.
   |
   o  changeset:   1:3b3e956f9171
   |  user:        Robert Altman <[e-mail]>
   |  date:        Mon Nov 28 16:37:57 2011 +0000
   |
   o  changeset:   0:141947992243
      user:        Robert Altman <[e-mail]>
      date:        Mon Nov 28 16:35:28 2011 +0000
      summary:     Checked in text file
   
   $ hg histedit 0
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ cd ..

tests/test-histedit-fold-non-commute.t

@@ -1,185 +1,347
   $ . "$TESTDIR/histedit-helpers.sh"
 
   $ cat >> $HGRCPATH <<EOF
   > [extensions]
   > histedit=
   > EOF
 
   $ initrepo ()
   > {
   >     hg init $1
   >     cd $1
   >     for x in a b c d e f ; do
   >         echo $x$x$x$x$x > $x
   >         hg add $x
   >     done
   >     hg ci -m 'Initial commit'
   >     for x in a b c d e f ; do
   >         echo $x > $x
   >         hg ci -m $x
   >     done
   >     echo 'I can haz no commute' > e
   >     hg ci -m 'does not commute with e'
   >     cd ..
   > }
 
   $ initrepo r
   $ cd r
 Initial generation of the command files
 
   $ EDITED="$TESTTMP/editedhistory"
   $ hg log --template 'pick {node|short} {rev} {desc}\n' -r 3 >> $EDITED
   $ hg log --template 'pick {node|short} {rev} {desc}\n' -r 4 >> $EDITED
   $ hg log --template 'fold {node|short} {rev} {desc}\n' -r 7 >> $EDITED
   $ hg log --template 'pick {node|short} {rev} {desc}\n' -r 5 >> $EDITED
   $ hg log --template 'pick {node|short} {rev} {desc}\n' -r 6 >> $EDITED
   $ cat $EDITED
   pick 65a9a84f33fd 3 c
   pick 00f1c5383965 4 d
   fold 39522b764e3d 7 does not commute with e
   pick 7b4e2f4b7bcd 5 e
   pick 500cac37a696 6 f
 
 log before edit
   $ hg log --graph
   @  changeset:   7:39522b764e3d
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     does not commute with e
   |
   o  changeset:   6:500cac37a696
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     f
   |
   o  changeset:   5:7b4e2f4b7bcd
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     e
   |
   o  changeset:   4:00f1c5383965
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     d
   |
   o  changeset:   3:65a9a84f33fd
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     c
   |
   o  changeset:   2:da6535b52e45
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     b
   |
   o  changeset:   1:c1f09da44841
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     a
   |
   o  changeset:   0:1715188a53c7
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     Initial commit
   
 
 edit the history
   $ hg histedit 3 --commands $EDITED 2>&1 | fixbundle
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   merging e
   warning: conflicts during merge.
   merging e incomplete! (edit conflicts, then use 'hg resolve --mark')
   Fix up the change and run hg histedit --continue
 
 fix up
   $ echo 'I can haz no commute' > e
   $ hg resolve --mark e
   (no more unresolved files)
   $ cat > cat.py <<EOF
   > import sys
   > print open(sys.argv[1]).read()
   > print
   > print
   > EOF
   $ HGEDITOR="python cat.py" hg histedit --continue 2>&1 | fixbundle | grep -v '2 files removed'
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   d
   ***
   does not commute with e
   
   
   
   HG: Enter commit message.  Lines beginning with 'HG:' are removed.
   HG: Leave message empty to abort commit.
   HG: --
   HG: user: test
   HG: branch 'default'
   HG: changed d
   HG: changed e
   
   
   
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   merging e
   warning: conflicts during merge.
   merging e incomplete! (edit conflicts, then use 'hg resolve --mark')
   Fix up the change and run hg histedit --continue
 
 just continue this time
   $ hg revert -r 'p1()' e
   $ hg resolve --mark e
   (no more unresolved files)
   $ hg histedit --continue 2>&1 | fixbundle
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
 log after edit
   $ hg log --graph
   @  changeset:   5:d9cf42e54966
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     f
   |
   o  changeset:   4:10486af2e984
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     d
   |
   o  changeset:   3:65a9a84f33fd
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     c
   |
   o  changeset:   2:da6535b52e45
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     b
   |
   o  changeset:   1:c1f09da44841
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     a
   |
   o  changeset:   0:1715188a53c7
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     Initial commit
   
 
 contents of e
   $ hg cat e
   I can haz no commute
 
 manifest
   $ hg manifest
   a
   b
   c
   d
   e
   f
 
   $ cd ..
+
+Repeat test using "roll", not "fold". "roll" folds in changes but drops message
+
+  $ initrepo r2
+  $ cd r2
+
+Initial generation of the command files
+
+  $ EDITED="$TESTTMP/editedhistory.2"
+  $ hg log --template 'pick {node|short} {rev} {desc}\n' -r 3 >> $EDITED
+  $ hg log --template 'pick {node|short} {rev} {desc}\n' -r 4 >> $EDITED
+  $ hg log --template 'roll {node|short} {rev} {desc}\n' -r 7 >> $EDITED
+  $ hg log --template 'pick {node|short} {rev} {desc}\n' -r 5 >> $EDITED
+  $ hg log --template 'pick {node|short} {rev} {desc}\n' -r 6 >> $EDITED
+  $ cat $EDITED
+  pick 65a9a84f33fd 3 c
+  pick 00f1c5383965 4 d
+  roll 39522b764e3d 7 does not commute with e
+  pick 7b4e2f4b7bcd 5 e
+  pick 500cac37a696 6 f
+
+log before edit
+  $ hg log --graph
+  @  changeset:   7:39522b764e3d
+  |  tag:         tip
+  |  user:        test
+  |  date:        Thu Jan 01 00:00:00 1970 +0000
+  |  summary:     does not commute with e
+  |
+  o  changeset:   6:500cac37a696
+  |  user:        test
+  |  date:        Thu Jan 01 00:00:00 1970 +0000
+  |  summary:     f
+  |
+  o  changeset:   5:7b4e2f4b7bcd
+  |  user:        test
+  |  date:        Thu Jan 01 00:00:00 1970 +0000
+  |  summary:     e
+  |
+  o  changeset:   4:00f1c5383965
+  |  user:        test
+  |  date:        Thu Jan 01 00:00:00 1970 +0000
+  |  summary:     d
+  |
+  o  changeset:   3:65a9a84f33fd
+  |  user:        test
+  |  date:        Thu Jan 01 00:00:00 1970 +0000
+  |  summary:     c
+  |
+  o  changeset:   2:da6535b52e45
+  |  user:        test
+  |  date:        Thu Jan 01 00:00:00 1970 +0000
+  |  summary:     b
+  |
+  o  changeset:   1:c1f09da44841
+  |  user:        test
+  |  date:        Thu Jan 01 00:00:00 1970 +0000
+  |  summary:     a
+  |
+  o  changeset:   0:1715188a53c7
+     user:        test
+     date:        Thu Jan 01 00:00:00 1970 +0000
+     summary:     Initial commit
+  
+
+edit the history
+  $ hg histedit 3 --commands $EDITED 2>&1 | fixbundle
+  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
+  merging e
+  warning: conflicts during merge.
+  merging e incomplete! (edit conflicts, then use 'hg resolve --mark')
+  Fix up the change and run hg histedit --continue
+
+fix up
+  $ echo 'I can haz no commute' > e
+  $ hg resolve --mark e
+  (no more unresolved files)
+  $ hg histedit --continue 2>&1 | fixbundle | grep -v '2 files removed'
+  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
+  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
+  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
+  merging e
+  warning: conflicts during merge.
+  merging e incomplete! (edit conflicts, then use 'hg resolve --mark')
+  Fix up the change and run hg histedit --continue
+
+just continue this time
+  $ hg revert -r 'p1()' e
+  $ hg resolve --mark e
+  (no more unresolved files)
+  $ hg histedit --continue 2>&1 | fixbundle
+  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
+  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
+
+log after edit
+  $ hg log --graph
+  @  changeset:   5:e7c4f5d4eb75
+  |  tag:         tip
+  |  user:        test
+  |  date:        Thu Jan 01 00:00:00 1970 +0000
+  |  summary:     f
+  |
+  o  changeset:   4:803d1bb561fc
+  |  user:        test
+  |  date:        Thu Jan 01 00:00:00 1970 +0000
+  |  summary:     d
+  |
+  o  changeset:   3:65a9a84f33fd
+  |  user:        test
+  |  date:        Thu Jan 01 00:00:00 1970 +0000
+  |  summary:     c
+  |
+  o  changeset:   2:da6535b52e45
+  |  user:        test
+  |  date:        Thu Jan 01 00:00:00 1970 +0000
+  |  summary:     b
+  |
+  o  changeset:   1:c1f09da44841
+  |  user:        test
+  |  date:        Thu Jan 01 00:00:00 1970 +0000
+  |  summary:     a
+  |
+  o  changeset:   0:1715188a53c7
+     user:        test
+     date:        Thu Jan 01 00:00:00 1970 +0000
+     summary:     Initial commit
+  
+
+contents of e
+  $ hg cat e
+  I can haz no commute
+
+manifest
+  $ hg manifest
+  a
+  b
+  c
+  d
+  e
+  f
+
+description is taken from rollup target commit
+
+  $ hg log --debug --rev 4
+  changeset:   4:803d1bb561fceac3129ec778db9da249a3106fc3
+  phase:       draft
+  parent:      3:65a9a84f33fdeb1ad5679b3941ec885d2b24027b
+  parent:      -1:0000000000000000000000000000000000000000
+  manifest:    4:b068a323d969f22af1296ec6a5ea9384cef437ac
+  user:        test
+  date:        Thu Jan 01 00:00:00 1970 +0000
+  files:       d e
+  extra:       branch=default
+  extra:       histedit_source=00f1c53839651fa5c76d423606811ea5455a79d0,39522b764e3d26103f08bd1fa2ccd3e3d7dbcf4e
+  description:
+  d
+  
+  
+
+done with repo r2
+
+  $ cd ..

tests/test-histedit-fold.t

@@ -1,366 +1,410
 Test histedit extension: Fold commands
 ======================================
 
 This test file is dedicated to testing the fold command in non conflicting
 case.
 
 Initialization
 ---------------
 
 
   $ . "$TESTDIR/histedit-helpers.sh"
 
   $ cat >> $HGRCPATH <<EOF
   > [alias]
   > logt = log --template '{rev}:{node|short} {desc|firstline}\n'
   > [extensions]
   > histedit=
   > EOF
 
 
 Simple folding
 --------------------
   $ initrepo ()
   > {
   >     hg init r
   >     cd r
   >     for x in a b c d e f ; do
   >         echo $x > $x
   >         hg add $x
   >         hg ci -m $x
   >     done
   > }
 
   $ initrepo
 
 log before edit
   $ hg logt --graph
   @  5:652413bf663e f
   |
   o  4:e860deea161a e
   |
   o  3:055a42cdd887 d
   |
   o  2:177f92b77385 c
   |
   o  1:d2ae7f538514 b
   |
   o  0:cb9a9f314b8b a
   
 
   $ hg histedit 177f92b77385 --commands - 2>&1 <<EOF | fixbundle
   > pick e860deea161a e
   > pick 652413bf663e f
   > fold 177f92b77385 c
   > pick 055a42cdd887 d
   > EOF
   0 files updated, 0 files merged, 4 files removed, 0 files unresolved
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   0 files updated, 0 files merged, 2 files removed, 0 files unresolved
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
 log after edit
   $ hg logt --graph
   @  4:9c277da72c9b d
   |
   o  3:6de59d13424a f
   |
   o  2:ee283cb5f2d5 e
   |
   o  1:d2ae7f538514 b
   |
   o  0:cb9a9f314b8b a
   
 
 post-fold manifest
   $ hg manifest
   a
   b
   c
   d
   e
   f
 
 
 check histedit_source
 
   $ hg log --debug --rev 3
   changeset:   3:6de59d13424a8a13acd3e975514aed29dd0d9b2d
   phase:       draft
   parent:      2:ee283cb5f2d5955443f23a27b697a04339e9a39a
   parent:      -1:0000000000000000000000000000000000000000
   manifest:    3:81eede616954057198ead0b2c73b41d1f392829a
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   files+:      c f
   extra:       branch=default
   extra:       histedit_source=a4f7421b80f79fcc59fff01bcbf4a53d127dd6d3,177f92b773850b59254aa5e923436f921b55483b
   description:
   f
   ***
   c
   
   
 
+rollup will fold without preserving the folded commit's message
+
+  $ hg histedit d2ae7f538514 --commands - 2>&1 <<EOF | fixbundle
+  > pick d2ae7f538514 b
+  > roll ee283cb5f2d5 e
+  > pick 6de59d13424a f
+  > pick 9c277da72c9b d
+  > EOF
+  0 files updated, 0 files merged, 4 files removed, 0 files unresolved
+  0 files updated, 0 files merged, 2 files removed, 0 files unresolved
+  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
+  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
+  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
+  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
+
+log after edit
+  $ hg logt --graph
+  @  3:c4a9eb7989fc d
+  |
+  o  2:8e03a72b6f83 f
+  |
+  o  1:391ee782c689 b
+  |
+  o  0:cb9a9f314b8b a
+  
+
+description is taken from rollup target commit
+
+  $ hg log --debug --rev 1
+  changeset:   1:391ee782c68930be438ccf4c6a403daedbfbffa5
+  phase:       draft
+  parent:      0:cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b
+  parent:      -1:0000000000000000000000000000000000000000
+  manifest:    1:b5e112a3a8354e269b1524729f0918662d847c38
+  user:        test
+  date:        Thu Jan 01 00:00:00 1970 +0000
+  files+:      b e
+  extra:       branch=default
+  extra:       histedit_source=d2ae7f538514cd87c17547b0de4cea71fe1af9fb,ee283cb5f2d5955443f23a27b697a04339e9a39a
+  description:
+  b
+  
+  
+
 check saving last-message.txt
 
   $ cat > $TESTTMP/abortfolding.py <<EOF
   > from mercurial import util
   > def abortfolding(ui, repo, hooktype, **kwargs):
   >     ctx = repo[kwargs.get('node')]
   >     if set(ctx.files()) == set(['c', 'd', 'f']):
   >         return True # abort folding commit only
   >     ui.warn('allow non-folding commit\\n')
   > EOF
   $ cat > .hg/hgrc <<EOF
   > [hooks]
   > pretxncommit.abortfolding = python:$TESTTMP/abortfolding.py:abortfolding
   > EOF
 
   $ cat > $TESTTMP/editor.sh << EOF
   > echo "==== before editing"
   > cat \$1
   > echo "===="
   > echo "check saving last-message.txt" >> \$1
   > EOF
 
   $ rm -f .hg/last-message.txt
-  $ HGEDITOR="sh $TESTTMP/editor.sh" hg histedit 6de59d13424a --commands - 2>&1 <<EOF | fixbundle
-  > pick 6de59d13424a f
-  > fold 9c277da72c9b d
+  $ HGEDITOR="sh $TESTTMP/editor.sh" hg histedit 8e03a72b6f83 --commands - 2>&1 <<EOF | fixbundle
+  > pick 8e03a72b6f83 f
+  > fold c4a9eb7989fc d
   > EOF
   0 files updated, 0 files merged, 1 files removed, 0 files unresolved
   allow non-folding commit
   0 files updated, 0 files merged, 3 files removed, 0 files unresolved
   ==== before editing
   f
   ***
   c
   ***
   d
   
   
   
   HG: Enter commit message.  Lines beginning with 'HG:' are removed.
   HG: Leave message empty to abort commit.
   HG: --
   HG: user: test
   HG: branch 'default'
   HG: changed c
   HG: changed d
   HG: changed f
   ====
   transaction abort!
   rollback completed
   abort: pretxncommit.abortfolding hook failed
 
   $ cat .hg/last-message.txt
   f
   ***
   c
   ***
   d
   
   
   
   check saving last-message.txt
 
   $ cd ..
 
 folding and creating no new change doesn't break:
 -------------------------------------------------
 
 folded content is dropped during a merge. The folded commit should properly disappear.
 
   $ mkdir fold-to-empty-test
   $ cd fold-to-empty-test
   $ hg init
   $ printf "1\n2\n3\n" > file
   $ hg add file
   $ hg commit -m '1+2+3'
   $ echo 4 >> file
   $ hg commit -m '+4'
   $ echo 5 >> file
   $ hg commit -m '+5'
   $ echo 6 >> file
   $ hg commit -m '+6'
   $ hg logt --graph
   @  3:251d831eeec5 +6
   |
   o  2:888f9082bf99 +5
   |
   o  1:617f94f13c0f +4
   |
   o  0:0189ba417d34 1+2+3
   
 
   $ hg histedit 1 --commands - << EOF
   > pick 617f94f13c0f 1 +4
   > drop 888f9082bf99 2 +5
   > fold 251d831eeec5 3 +6
   > EOF
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   merging file
   warning: conflicts during merge.
   merging file incomplete! (edit conflicts, then use 'hg resolve --mark')
   Fix up the change and run hg histedit --continue
   [1]
 There were conflicts, we keep P1 content. This
 should effectively drop the changes from +6.
   $ hg status
   M file
   ? file.orig
   $ hg resolve -l
   U file
   $ hg revert -r 'p1()' file
   $ hg resolve --mark file
   (no more unresolved files)
   $ hg histedit --continue
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   saved backup bundle to $TESTTMP/*-backup.hg (glob)
   $ hg logt --graph
   @  1:617f94f13c0f +4
   |
   o  0:0189ba417d34 1+2+3
   
 
   $ cd ..
 
 
 Test fold through dropped
 -------------------------
 
 
 Test corner case where folded revision is separated from its parent by a
 dropped revision.
 
 
   $ hg init fold-with-dropped
   $ cd fold-with-dropped
   $ printf "1\n2\n3\n" > file
   $ hg commit -Am '1+2+3'
   adding file
   $ echo 4 >> file
   $ hg commit -m '+4'
   $ echo 5 >> file
   $ hg commit -m '+5'
   $ echo 6 >> file
   $ hg commit -m '+6'
   $ hg logt -G
   @  3:251d831eeec5 +6
   |
   o  2:888f9082bf99 +5
   |
   o  1:617f94f13c0f +4
   |
   o  0:0189ba417d34 1+2+3
   
   $ hg histedit 1 --commands -  << EOF
   > pick 617f94f13c0f 1 +4
   > drop 888f9082bf99 2 +5
   > fold 251d831eeec5 3 +6
   > EOF
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   merging file
   warning: conflicts during merge.
   merging file incomplete! (edit conflicts, then use 'hg resolve --mark')
   Fix up the change and run hg histedit --continue
   [1]
   $ cat > file << EOF
   > 1
   > 2
   > 3
   > 4
   > 5
   > EOF
   $ hg resolve --mark file
   (no more unresolved files)
   $ hg commit -m '+5.2'
   created new head
   $ echo 6 >> file
   $ HGEDITOR=cat hg histedit --continue
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   +4
   ***
   +5.2
   ***
   +6
   
   
   
   HG: Enter commit message.  Lines beginning with 'HG:' are removed.
   HG: Leave message empty to abort commit.
   HG: --
   HG: user: test
   HG: branch 'default'
   HG: changed file
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   saved backup bundle to $TESTTMP/fold-with-dropped/.hg/strip-backup/617f94f13c0f-backup.hg (glob)
   $ hg logt -G
   @  1:10c647b2cdd5 +4
   |
   o  0:0189ba417d34 1+2+3
   
   $ hg export tip
   # HG changeset patch
   # User test
   # Date 0 0
   #      Thu Jan 01 00:00:00 1970 +0000
   # Node ID 10c647b2cdd54db0603ecb99b2ff5ce66d5a5323
   # Parent  0189ba417d34df9dda55f88b637dcae9917b5964
   +4
   ***
   +5.2
   ***
   +6
   
   diff -r 0189ba417d34 -r 10c647b2cdd5 file
   --- a/file	Thu Jan 01 00:00:00 1970 +0000
   +++ b/file	Thu Jan 01 00:00:00 1970 +0000
   @@ -1,3 +1,6 @@
    1
    2
    3
   +4
   +5
   +6
   $ cd ..
 
 
 Folding with initial rename (issue3729)
 ---------------------------------------
 
   $ hg init fold-rename
   $ cd fold-rename
   $ echo a > a.txt
   $ hg add a.txt
   $ hg commit -m a
   $ hg rename a.txt b.txt
   $ hg commit -m rename
   $ echo b >> b.txt
   $ hg commit -m b
 
   $ hg logt --follow b.txt
   2:e0371e0426bc b
   1:1c4f440a8085 rename
   0:6c795aa153cb a
 
   $ hg histedit 1c4f440a8085 --commands - 2>&1 << EOF | fixbundle
   > pick 1c4f440a8085 rename
   > fold e0371e0426bc b
   > EOF
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   reverting b.txt
   1 files updated, 0 files merged, 1 files removed, 0 files unresolved
   1 files updated, 0 files merged, 1 files removed, 0 files unresolved
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
   $ hg logt --follow b.txt
   1:cf858d235c76 rename
   0:6c795aa153cb a
 
   $ cd ..

tests/test-histedit-obsolete.t

@@ -1,462 +1,463
   $ . "$TESTDIR/histedit-helpers.sh"
 
 Enable obsolete
 
   $ cat > ${TESTTMP}/obs.py << EOF
   > import mercurial.obsolete
   > mercurial.obsolete._enabled = True
   > EOF
 
   $ cat >> $HGRCPATH << EOF
   > [ui]
   > logtemplate= {rev}:{node|short} {desc|firstline}
   > [phases]
   > publish=False
   > [extensions]'
   > histedit=
   > rebase=
   > 
   > obs=${TESTTMP}/obs.py
   > EOF
 
   $ hg init base
   $ cd base
 
   $ for x in a b c d e f ; do
   >     echo $x > $x
   >     hg add $x
   >     hg ci -m $x
   > done
 
   $ hg log --graph
   @  5:652413bf663e f
   |
   o  4:e860deea161a e
   |
   o  3:055a42cdd887 d
   |
   o  2:177f92b77385 c
   |
   o  1:d2ae7f538514 b
   |
   o  0:cb9a9f314b8b a
   
 
   $ HGEDITOR=cat hg histedit 1
   pick d2ae7f538514 1 b
   pick 177f92b77385 2 c
   pick 055a42cdd887 3 d
   pick e860deea161a 4 e
   pick 652413bf663e 5 f
   
   # Edit history between d2ae7f538514 and 652413bf663e
   #
   # Commits are listed from least to most recent
   #
   # Commands:
   #  p, pick = use commit
   #  e, edit = use commit, but stop for amending
   #  f, fold = use commit, but combine it with the one above
+  #  r, roll = like fold, but discard this commit's description
   #  d, drop = remove commit from history
   #  m, mess = edit message without changing commit content
   #
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg histedit 1 --commands - --verbose <<EOF | grep histedit
   > pick 177f92b77385 2 c
   > drop d2ae7f538514 1 b
   > pick 055a42cdd887 3 d
   > fold e860deea161a 4 e
   > pick 652413bf663e 5 f
   > EOF
   saved backup bundle to $TESTTMP/base/.hg/strip-backup/96e494a2d553-backup.hg (glob)
   $ hg log --graph --hidden
   @  8:cacdfd884a93 f
   |
   o  7:59d9f330561f d
   |
   o  6:b346ab9a313d c
   |
   | x  5:652413bf663e f
   | |
   | x  4:e860deea161a e
   | |
   | x  3:055a42cdd887 d
   | |
   | x  2:177f92b77385 c
   | |
   | x  1:d2ae7f538514 b
   |/
   o  0:cb9a9f314b8b a
   
   $ hg debugobsolete
   d2ae7f538514cd87c17547b0de4cea71fe1af9fb 0 {'date': '* *', 'user': 'test'} (glob)
   177f92b773850b59254aa5e923436f921b55483b b346ab9a313db8537ecf96fca3ca3ca984ef3bd7 0 {'date': '* *', 'user': 'test'} (glob)
   055a42cdd88768532f9cf79daa407fc8d138de9b 59d9f330561fd6c88b1a6b32f0e45034d88db784 0 {'date': '* *', 'user': 'test'} (glob)
   e860deea161a2f77de56603b340ebbb4536308ae 59d9f330561fd6c88b1a6b32f0e45034d88db784 0 {'date': '* *', 'user': 'test'} (glob)
   652413bf663ef2a641cab26574e46d5f5a64a55a cacdfd884a9321ec4e1de275ef3949fa953a1f83 0 {'date': '* *', 'user': 'test'} (glob)
 
 
 Ensure hidden revision does not prevent histedit
 -------------------------------------------------
 
 create an hidden revision
 
   $ hg histedit 6 --commands - << EOF
   > pick b346ab9a313d 6 c
   > drop 59d9f330561f 7 d
   > pick cacdfd884a93 8 f
   > EOF
   0 files updated, 0 files merged, 3 files removed, 0 files unresolved
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg log --graph
   @  9:c13eb81022ca f
   |
   o  6:b346ab9a313d c
   |
   o  0:cb9a9f314b8b a
   
 check hidden revision are ignored (6 have hidden children 7 and 8)
 
   $ hg histedit 6 --commands - << EOF
   > pick b346ab9a313d 6 c
   > pick c13eb81022ca 8 f
   > EOF
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
 
 
 Test that rewriting leaving instability behind is allowed
 ---------------------------------------------------------------------
 
   $ hg up '.^'
   0 files updated, 0 files merged, 1 files removed, 0 files unresolved
   $ hg log -r 'children(.)'
   9:c13eb81022ca f (no-eol)
   $ hg histedit -r '.' --commands - <<EOF
   > edit b346ab9a313d 6 c
   > EOF
   0 files updated, 0 files merged, 1 files removed, 0 files unresolved
   adding c
   Make changes as needed, you may commit or record as needed now.
   When you are finished, run hg histedit --continue to resume.
   [1]
   $ echo c >> c
   $ hg histedit --continue
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
   $ hg log -r 'unstable()'
   9:c13eb81022ca f (no-eol)
 
 stabilise
 
   $ hg rebase  -r 'unstable()' -d .
   $ hg up tip -q
 
 Test dropping of changeset on the top of the stack
 -------------------------------------------------------
 
 Nothing is rewritten below, the working directory parent must be change for the
 dropped changeset to be hidden.
 
   $ cd ..
   $ hg clone base droplast
   updating to branch default
   3 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ cd droplast
   $ hg histedit -r '40db8afa467b' --commands - << EOF
   > pick 40db8afa467b 10 c
   > drop b449568bf7fc 11 f
   > EOF
   0 files updated, 0 files merged, 1 files removed, 0 files unresolved
   $ hg log -G
   @  10:40db8afa467b c
   |
   o  0:cb9a9f314b8b a
   
 
 With rewritten ancestors
 
   $ echo e > e
   $ hg add e
   $ hg commit -m g
   $ echo f > f
   $ hg add f
   $ hg commit -m h
   $ hg histedit -r '40db8afa467b' --commands - << EOF
   > pick 47a8561c0449 12 g
   > pick 40db8afa467b 10 c
   > drop 1b3b05f35ff0 13 h
   > EOF
   0 files updated, 0 files merged, 3 files removed, 0 files unresolved
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg log -G
   @  15:ee6544123ab8 c
   |
   o  14:269e713e9eae g
   |
   o  0:cb9a9f314b8b a
   
   $ cd ../base
 
 
 
 Test phases support
 ===========================================
 
 Check that histedit respect immutability
 -------------------------------------------
 
   $ cat >> $HGRCPATH << EOF
   > [ui]
   > logtemplate= {rev}:{node|short} ({phase}) {desc|firstline}\n
   > EOF
 
   $ hg ph -pv '.^'
   phase changed for 2 changesets
   $ hg log -G
   @  11:b449568bf7fc (draft) f
   |
   o  10:40db8afa467b (public) c
   |
   o  0:cb9a9f314b8b (public) a
   
   $ hg histedit -r '.~2'
   abort: cannot edit immutable changeset: cb9a9f314b8b
   [255]
 
 
 Prepare further testing
 -------------------------------------------
 
   $ for x in g h i j k ; do
   >     echo $x > $x
   >     hg add $x
   >     hg ci -m $x
   > done
   $ hg phase --force --secret .~2
   $ hg log -G
   @  16:ee118ab9fa44 (secret) k
   |
   o  15:3a6c53ee7f3d (secret) j
   |
   o  14:b605fb7503f2 (secret) i
   |
   o  13:7395e1ff83bd (draft) h
   |
   o  12:6b70183d2492 (draft) g
   |
   o  11:b449568bf7fc (draft) f
   |
   o  10:40db8afa467b (public) c
   |
   o  0:cb9a9f314b8b (public) a
   
   $ cd ..
 
 simple phase conservation
 -------------------------------------------
 
 Resulting changeset should conserve the phase of the original one whatever the
 phases.new-commit option is.
 
 New-commit as draft (default)
 
   $ cp -r base simple-draft
   $ cd simple-draft
   $ hg histedit -r 'b449568bf7fc' --commands - << EOF
   > edit b449568bf7fc 11 f
   > pick 6b70183d2492 12 g
   > pick 7395e1ff83bd 13 h
   > pick b605fb7503f2 14 i
   > pick 3a6c53ee7f3d 15 j
   > pick ee118ab9fa44 16 k
   > EOF
   0 files updated, 0 files merged, 6 files removed, 0 files unresolved
   adding f
   Make changes as needed, you may commit or record as needed now.
   When you are finished, run hg histedit --continue to resume.
   [1]
   $ echo f >> f
   $ hg histedit --continue
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg log -G
   @  22:12e89af74238 (secret) k
   |
   o  21:636a8687b22e (secret) j
   |
   o  20:ccaf0a38653f (secret) i
   |
   o  19:11a89d1c2613 (draft) h
   |
   o  18:c1dec7ca82ea (draft) g
   |
   o  17:087281e68428 (draft) f
   |
   o  10:40db8afa467b (public) c
   |
   o  0:cb9a9f314b8b (public) a
   
   $ cd ..
 
 
 New-commit as draft (default)
 
   $ cp -r base simple-secret
   $ cd simple-secret
   $ cat >> .hg/hgrc << EOF
   > [phases]
   > new-commit=secret
   > EOF
   $ hg histedit -r 'b449568bf7fc' --commands - << EOF
   > edit b449568bf7fc 11 f
   > pick 6b70183d2492 12 g
   > pick 7395e1ff83bd 13 h
   > pick b605fb7503f2 14 i
   > pick 3a6c53ee7f3d 15 j
   > pick ee118ab9fa44 16 k
   > EOF
   0 files updated, 0 files merged, 6 files removed, 0 files unresolved
   adding f
   Make changes as needed, you may commit or record as needed now.
   When you are finished, run hg histedit --continue to resume.
   [1]
   $ echo f >> f
   $ hg histedit --continue
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg log -G
   @  22:12e89af74238 (secret) k
   |
   o  21:636a8687b22e (secret) j
   |
   o  20:ccaf0a38653f (secret) i
   |
   o  19:11a89d1c2613 (draft) h
   |
   o  18:c1dec7ca82ea (draft) g
   |
   o  17:087281e68428 (draft) f
   |
   o  10:40db8afa467b (public) c
   |
   o  0:cb9a9f314b8b (public) a
   
   $ cd ..
 
 
 Changeset reordering
 -------------------------------------------
 
 If a secret changeset is put before a draft one, all descendant should be secret.
 It seems more important to present the secret phase.
 
   $ cp -r base reorder
   $ cd reorder
   $ hg histedit -r 'b449568bf7fc' --commands - << EOF
   > pick b449568bf7fc 11 f
   > pick 3a6c53ee7f3d 15 j
   > pick 6b70183d2492 12 g
   > pick b605fb7503f2 14 i
   > pick 7395e1ff83bd 13 h
   > pick ee118ab9fa44 16 k
   > EOF
   0 files updated, 0 files merged, 5 files removed, 0 files unresolved
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg log -G
   @  21:558246857888 (secret) k
   |
   o  20:28bd44768535 (secret) h
   |
   o  19:d5395202aeb9 (secret) i
   |
   o  18:21edda8e341b (secret) g
   |
   o  17:5ab64f3a4832 (secret) j
   |
   o  11:b449568bf7fc (draft) f
   |
   o  10:40db8afa467b (public) c
   |
   o  0:cb9a9f314b8b (public) a
   
   $ cd ..
 
 Changeset folding
 -------------------------------------------
 
 Folding a secret changeset with a draft one turn the result secret (again,
 better safe than sorry). Folding between same phase changeset still works
 
 Note that there is a few reordering in this series for more extensive test
 
   $ cp -r base folding
   $ cd folding
   $ cat >> .hg/hgrc << EOF
   > [phases]
   > new-commit=secret
   > EOF
   $ hg histedit -r 'b449568bf7fc' --commands - << EOF
   > pick 7395e1ff83bd 13 h
   > fold b449568bf7fc 11 f
   > pick 6b70183d2492 12 g
   > fold 3a6c53ee7f3d 15 j
   > pick b605fb7503f2 14 i
   > fold ee118ab9fa44 16 k
   > EOF
   0 files updated, 0 files merged, 6 files removed, 0 files unresolved
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   0 files updated, 0 files merged, 2 files removed, 0 files unresolved
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   0 files updated, 0 files merged, 2 files removed, 0 files unresolved
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   0 files updated, 0 files merged, 2 files removed, 0 files unresolved
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   saved backup bundle to $TESTTMP/folding/.hg/strip-backup/58019c66f35f-backup.hg (glob)
   saved backup bundle to $TESTTMP/folding/.hg/strip-backup/83d1858e070b-backup.hg (glob)
   saved backup bundle to $TESTTMP/folding/.hg/strip-backup/859969f5ed7e-backup.hg (glob)
   $ hg log -G
   @  19:f9daec13fb98 (secret) i
   |
   o  18:49807617f46a (secret) g
   |
   o  17:050280826e04 (draft) h
   |
   o  10:40db8afa467b (public) c
   |
   o  0:cb9a9f314b8b (public) a
   
   $ hg co 18
   0 files updated, 0 files merged, 2 files removed, 0 files unresolved
   $ echo wat >> wat
   $ hg add wat
   $ hg ci -m 'add wat'
   created new head
   $ hg merge 19
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   (branch merge, don't forget to commit)
   $ hg ci -m 'merge'
   $ echo not wat > wat
   $ hg ci -m 'modify wat'
   $ hg histedit 17
   abort: cannot edit history that contains merges
   [255]
   $ cd ..

tests/test-histedit-outgoing.t

@@ -1,144 +1,147
   $ cat >> $HGRCPATH <<EOF
   > [extensions]
   > histedit=
   > EOF
 
   $ initrepos ()
   > {
   >     hg init r
   >     cd r
   >     for x in a b c ; do
   >         echo $x > $x
   >         hg add $x
   >         hg ci -m $x
   >     done
   >     cd ..
   >     hg clone r r2 | grep -v updating
   >     cd r2
   >     for x in d e f ; do
   >         echo $x > $x
   >         hg add $x
   >         hg ci -m $x
   >     done
   >     cd ..
   >     hg init r3
   >     cd r3
   >     for x in g h i ; do
   >         echo $x > $x
   >         hg add $x
   >         hg ci -m $x
   >     done
   >     cd ..
   > }
 
   $ initrepos
   3 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
 show the edit commands offered by outgoing
   $ cd r2
   $ HGEDITOR=cat hg histedit --outgoing ../r | grep -v comparing | grep -v searching
   pick 055a42cdd887 3 d
   pick e860deea161a 4 e
   pick 652413bf663e 5 f
   
   # Edit history between 055a42cdd887 and 652413bf663e
   #
   # Commits are listed from least to most recent
   #
   # Commands:
   #  p, pick = use commit
   #  e, edit = use commit, but stop for amending
   #  f, fold = use commit, but combine it with the one above
+  #  r, roll = like fold, but discard this commit's description
   #  d, drop = remove commit from history
   #  m, mess = edit message without changing commit content
   #
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ cd ..
 
 show the error from unrelated repos
   $ cd r3
   $ HGEDITOR=cat hg histedit --outgoing ../r | grep -v comparing | grep -v searching
   abort: repository is unrelated
   [1]
   $ cd ..
 
 show the error from unrelated repos
   $ cd r3
   $ HGEDITOR=cat hg histedit --force --outgoing ../r
   comparing with ../r
   searching for changes
   warning: repository is unrelated
   pick 2a4042b45417 0 g
   pick 68c46b4927ce 1 h
   pick 51281e65ba79 2 i
   
   # Edit history between 2a4042b45417 and 51281e65ba79
   #
   # Commits are listed from least to most recent
   #
   # Commands:
   #  p, pick = use commit
   #  e, edit = use commit, but stop for amending
   #  f, fold = use commit, but combine it with the one above
+  #  r, roll = like fold, but discard this commit's description
   #  d, drop = remove commit from history
   #  m, mess = edit message without changing commit content
   #
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ cd ..
 
 test sensitivity to branch in URL:
 
   $ cd r2
   $ hg -q update 2
   $ hg -q branch foo
   $ hg commit -m 'create foo branch'
   $ HGEDITOR=cat hg histedit --outgoing '../r#foo' | grep -v comparing | grep -v searching
   pick f26599ee3441 6 create foo branch
   
   # Edit history between f26599ee3441 and f26599ee3441
   #
   # Commits are listed from least to most recent
   #
   # Commands:
   #  p, pick = use commit
   #  e, edit = use commit, but stop for amending
   #  f, fold = use commit, but combine it with the one above
+  #  r, roll = like fold, but discard this commit's description
   #  d, drop = remove commit from history
   #  m, mess = edit message without changing commit content
   #
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
 test to check number of roots in outgoing revisions
 
   $ hg -q outgoing -G --template '{node|short}({branch})' '../r'
   @  f26599ee3441(foo)
   
   o  652413bf663e(default)
   |
   o  e860deea161a(default)
   |
   o  055a42cdd887(default)
   
   $ HGEDITOR=cat hg -q histedit --outgoing '../r'
   abort: there are ambiguous outgoing revisions
   (see "hg help histedit" for more detail)
   [255]
 
   $ hg -q update -C 2
   $ echo aa >> a
   $ hg -q commit -m 'another head on default'
   $ hg -q outgoing -G --template '{node|short}({branch})' '../r#default'
   @  3879dc049647(default)
   
   o  652413bf663e(default)
   |
   o  e860deea161a(default)
   |
   o  055a42cdd887(default)
   
   $ HGEDITOR=cat hg -q histedit --outgoing '../r#default'
   abort: there are ambiguous outgoing revisions
   (see "hg help histedit" for more detail)
   [255]
 
   $ cd ..