changegroup: use progress helper

Differential Revision: https://phab.mercurial-scm.org/D3783

mercurial/changegroup.py

@@ -1,1016 +1,1017
 # changegroup.py - Mercurial changegroup manipulation functions
 #
 #  Copyright 2006 Matt Mackall <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2 or any later version.
 
 from __future__ import absolute_import
 
 import os
 import struct
 import weakref
 
 from .i18n import _
 from .node import (
     hex,
     nullrev,
     short,
 )
 
 from . import (
     dagutil,
     error,
     mdiff,
     phases,
     pycompat,
     util,
 )
 
 from .utils import (
     stringutil,
 )
 
 _CHANGEGROUPV1_DELTA_HEADER = "20s20s20s20s"
 _CHANGEGROUPV2_DELTA_HEADER = "20s20s20s20s20s"
 _CHANGEGROUPV3_DELTA_HEADER = ">20s20s20s20s20sH"
 
 LFS_REQUIREMENT = 'lfs'
 
 # When narrowing is finalized and no longer subject to format changes,
 # we should move this to just "narrow" or similar.
 NARROW_REQUIREMENT = 'narrowhg-experimental'
 
 readexactly = util.readexactly
 
 def getchunk(stream):
     """return the next chunk from stream as a string"""
     d = readexactly(stream, 4)
     l = struct.unpack(">l", d)[0]
     if l <= 4:
         if l:
             raise error.Abort(_("invalid chunk length %d") % l)
         return ""
     return readexactly(stream, l - 4)
 
 def chunkheader(length):
     """return a changegroup chunk header (string)"""
     return struct.pack(">l", length + 4)
 
 def closechunk():
     """return a changegroup chunk header (string) for a zero-length chunk"""
     return struct.pack(">l", 0)
 
 def writechunks(ui, chunks, filename, vfs=None):
     """Write chunks to a file and return its filename.
 
     The stream is assumed to be a bundle file.
     Existing files will not be overwritten.
     If no filename is specified, a temporary file is created.
     """
     fh = None
     cleanup = None
     try:
         if filename:
             if vfs:
                 fh = vfs.open(filename, "wb")
             else:
                 # Increase default buffer size because default is usually
                 # small (4k is common on Linux).
                 fh = open(filename, "wb", 131072)
         else:
             fd, filename = pycompat.mkstemp(prefix="hg-bundle-", suffix=".hg")
             fh = os.fdopen(fd, r"wb")
         cleanup = filename
         for c in chunks:
             fh.write(c)
         cleanup = None
         return filename
     finally:
         if fh is not None:
             fh.close()
         if cleanup is not None:
             if filename and vfs:
                 vfs.unlink(cleanup)
             else:
                 os.unlink(cleanup)
 
 class cg1unpacker(object):
     """Unpacker for cg1 changegroup streams.
 
     A changegroup unpacker handles the framing of the revision data in
     the wire format. Most consumers will want to use the apply()
     method to add the changes from the changegroup to a repository.
 
     If you're forwarding a changegroup unmodified to another consumer,
     use getchunks(), which returns an iterator of changegroup
     chunks. This is mostly useful for cases where you need to know the
     data stream has ended by observing the end of the changegroup.
 
     deltachunk() is useful only if you're applying delta data. Most
     consumers should prefer apply() instead.
 
     A few other public methods exist. Those are used only for
     bundlerepo and some debug commands - their use is discouraged.
     """
     deltaheader = _CHANGEGROUPV1_DELTA_HEADER
     deltaheadersize = struct.calcsize(deltaheader)
     version = '01'
     _grouplistcount = 1 # One list of files after the manifests
 
     def __init__(self, fh, alg, extras=None):
         if alg is None:
             alg = 'UN'
         if alg not in util.compengines.supportedbundletypes:
             raise error.Abort(_('unknown stream compression type: %s')
                              % alg)
         if alg == 'BZ':
             alg = '_truncatedBZ'
 
         compengine = util.compengines.forbundletype(alg)
         self._stream = compengine.decompressorreader(fh)
         self._type = alg
         self.extras = extras or {}
         self.callback = None
 
     # These methods (compressed, read, seek, tell) all appear to only
     # be used by bundlerepo, but it's a little hard to tell.
     def compressed(self):
         return self._type is not None and self._type != 'UN'
     def read(self, l):
         return self._stream.read(l)
     def seek(self, pos):
         return self._stream.seek(pos)
     def tell(self):
         return self._stream.tell()
     def close(self):
         return self._stream.close()
 
     def _chunklength(self):
         d = readexactly(self._stream, 4)
         l = struct.unpack(">l", d)[0]
         if l <= 4:
             if l:
                 raise error.Abort(_("invalid chunk length %d") % l)
             return 0
         if self.callback:
             self.callback()
         return l - 4
 
     def changelogheader(self):
         """v10 does not have a changelog header chunk"""
         return {}
 
     def manifestheader(self):
         """v10 does not have a manifest header chunk"""
         return {}
 
     def filelogheader(self):
         """return the header of the filelogs chunk, v10 only has the filename"""
         l = self._chunklength()
         if not l:
             return {}
         fname = readexactly(self._stream, l)
         return {'filename': fname}
 
     def _deltaheader(self, headertuple, prevnode):
         node, p1, p2, cs = headertuple
         if prevnode is None:
             deltabase = p1
         else:
             deltabase = prevnode
         flags = 0
         return node, p1, p2, deltabase, cs, flags
 
     def deltachunk(self, prevnode):
         l = self._chunklength()
         if not l:
             return {}
         headerdata = readexactly(self._stream, self.deltaheadersize)
         header = struct.unpack(self.deltaheader, headerdata)
         delta = readexactly(self._stream, l - self.deltaheadersize)
         node, p1, p2, deltabase, cs, flags = self._deltaheader(header, prevnode)
         return (node, p1, p2, cs, deltabase, delta, flags)
 
     def getchunks(self):
         """returns all the chunks contains in the bundle
 
         Used when you need to forward the binary stream to a file or another
         network API. To do so, it parse the changegroup data, otherwise it will
         block in case of sshrepo because it don't know the end of the stream.
         """
         # For changegroup 1 and 2, we expect 3 parts: changelog, manifestlog,
         # and a list of filelogs. For changegroup 3, we expect 4 parts:
         # changelog, manifestlog, a list of tree manifestlogs, and a list of
         # filelogs.
         #
         # Changelog and manifestlog parts are terminated with empty chunks. The
         # tree and file parts are a list of entry sections. Each entry section
         # is a series of chunks terminating in an empty chunk. The list of these
         # entry sections is terminated in yet another empty chunk, so we know
         # we've reached the end of the tree/file list when we reach an empty
         # chunk that was proceeded by no non-empty chunks.
 
         parts = 0
         while parts < 2 + self._grouplistcount:
             noentries = True
             while True:
                 chunk = getchunk(self)
                 if not chunk:
                     # The first two empty chunks represent the end of the
                     # changelog and the manifestlog portions. The remaining
                     # empty chunks represent either A) the end of individual
                     # tree or file entries in the file list, or B) the end of
                     # the entire list. It's the end of the entire list if there
                     # were no entries (i.e. noentries is True).
                     if parts < 2:
                         parts += 1
                     elif noentries:
                         parts += 1
                     break
                 noentries = False
                 yield chunkheader(len(chunk))
                 pos = 0
                 while pos < len(chunk):
                     next = pos + 2**20
                     yield chunk[pos:next]
                     pos = next
             yield closechunk()
 
     def _unpackmanifests(self, repo, revmap, trp, prog):
         self.callback = prog.increment
         # no need to check for empty manifest group here:
         # if the result of the merge of 1 and 2 is the same in 3 and 4,
         # no new manifest will be created and the manifest group will
         # be empty during the pull
         self.manifestheader()
         deltas = self.deltaiter()
         repo.manifestlog._revlog.addgroup(deltas, revmap, trp)
         prog.complete()
         self.callback = None
 
     def apply(self, repo, tr, srctype, url, targetphase=phases.draft,
               expectedtotal=None):
         """Add the changegroup returned by source.read() to this repo.
         srctype is a string like 'push', 'pull', or 'unbundle'.  url is
         the URL of the repo where this changegroup is coming from.
 
         Return an integer summarizing the change to this repo:
         - nothing changed or no source: 0
         - more heads than before: 1+added heads (2..n)
         - fewer heads than before: -1-removed heads (-2..-n)
         - number of heads stays the same: 1
         """
         repo = repo.unfiltered()
         def csmap(x):
             repo.ui.debug("add changeset %s\n" % short(x))
             return len(cl)
 
         def revmap(x):
             return cl.rev(x)
 
         changesets = files = revisions = 0
 
         try:
             # The transaction may already carry source information. In this
             # case we use the top level data. We overwrite the argument
             # because we need to use the top level value (if they exist)
             # in this function.
             srctype = tr.hookargs.setdefault('source', srctype)
             url = tr.hookargs.setdefault('url', url)
             repo.hook('prechangegroup',
                       throw=True, **pycompat.strkwargs(tr.hookargs))
 
             # write changelog data to temp files so concurrent readers
             # will not see an inconsistent view
             cl = repo.changelog
             cl.delayupdate(tr)
             oldheads = set(cl.heads())
 
             trp = weakref.proxy(tr)
             # pull off the changeset group
             repo.ui.status(_("adding changesets\n"))
             clstart = len(cl)
             progress = repo.ui.makeprogress(_('changesets'), unit=_('chunks'),
                                             total=expectedtotal)
             self.callback = progress.increment
 
             efiles = set()
             def onchangelog(cl, node):
                 efiles.update(cl.readfiles(node))
 
             self.changelogheader()
             deltas = self.deltaiter()
             cgnodes = cl.addgroup(deltas, csmap, trp, addrevisioncb=onchangelog)
             efiles = len(efiles)
 
             if not cgnodes:
                 repo.ui.develwarn('applied empty changegroup',
                                   config='warn-empty-changegroup')
             clend = len(cl)
             changesets = clend - clstart
             progress.complete()
             self.callback = None
 
             # pull off the manifest group
             repo.ui.status(_("adding manifests\n"))
             # We know that we'll never have more manifests than we had
             # changesets.
             progress = repo.ui.makeprogress(_('manifests'), unit=_('chunks'),
                                             total=changesets)
             self._unpackmanifests(repo, revmap, trp, progress)
 
             needfiles = {}
             if repo.ui.configbool('server', 'validate'):
                 cl = repo.changelog
                 ml = repo.manifestlog
                 # validate incoming csets have their manifests
                 for cset in xrange(clstart, clend):
                     mfnode = cl.changelogrevision(cset).manifest
                     mfest = ml[mfnode].readdelta()
                     # store file cgnodes we must see
                     for f, n in mfest.iteritems():
                         needfiles.setdefault(f, set()).add(n)
 
             # process the files
             repo.ui.status(_("adding file changes\n"))
             newrevs, newfiles = _addchangegroupfiles(
                 repo, self, revmap, trp, efiles, needfiles)
             revisions += newrevs
             files += newfiles
 
             deltaheads = 0
             if oldheads:
                 heads = cl.heads()
                 deltaheads = len(heads) - len(oldheads)
                 for h in heads:
                     if h not in oldheads and repo[h].closesbranch():
                         deltaheads -= 1
             htext = ""
             if deltaheads:
                 htext = _(" (%+d heads)") % deltaheads
 
             repo.ui.status(_("added %d changesets"
                              " with %d changes to %d files%s\n")
                              % (changesets, revisions, files, htext))
             repo.invalidatevolatilesets()
 
             if changesets > 0:
                 if 'node' not in tr.hookargs:
                     tr.hookargs['node'] = hex(cl.node(clstart))
                     tr.hookargs['node_last'] = hex(cl.node(clend - 1))
                     hookargs = dict(tr.hookargs)
                 else:
                     hookargs = dict(tr.hookargs)
                     hookargs['node'] = hex(cl.node(clstart))
                     hookargs['node_last'] = hex(cl.node(clend - 1))
                 repo.hook('pretxnchangegroup',
                           throw=True, **pycompat.strkwargs(hookargs))
 
             added = [cl.node(r) for r in xrange(clstart, clend)]
             phaseall = None
             if srctype in ('push', 'serve'):
                 # Old servers can not push the boundary themselves.
                 # New servers won't push the boundary if changeset already
                 # exists locally as secret
                 #
                 # We should not use added here but the list of all change in
                 # the bundle
                 if repo.publishing():
                     targetphase = phaseall = phases.public
                 else:
                     # closer target phase computation
 
                     # Those changesets have been pushed from the
                     # outside, their phases are going to be pushed
                     # alongside. Therefor `targetphase` is
                     # ignored.
                     targetphase = phaseall = phases.draft
             if added:
                 phases.registernew(repo, tr, targetphase, added)
             if phaseall is not None:
                 phases.advanceboundary(repo, tr, phaseall, cgnodes)
 
             if changesets > 0:
 
                 def runhooks():
                     # These hooks run when the lock releases, not when the
                     # transaction closes. So it's possible for the changelog
                     # to have changed since we last saw it.
                     if clstart >= len(repo):
                         return
 
                     repo.hook("changegroup", **pycompat.strkwargs(hookargs))
 
                     for n in added:
                         args = hookargs.copy()
                         args['node'] = hex(n)
                         del args['node_last']
                         repo.hook("incoming", **pycompat.strkwargs(args))
 
                     newheads = [h for h in repo.heads()
                                 if h not in oldheads]
                     repo.ui.log("incoming",
                                 "%d incoming changes - new heads: %s\n",
                                 len(added),
                                 ', '.join([hex(c[:6]) for c in newheads]))
 
                 tr.addpostclose('changegroup-runhooks-%020i' % clstart,
                                 lambda tr: repo._afterlock(runhooks))
         finally:
             repo.ui.flush()
         # never return 0 here:
         if deltaheads < 0:
             ret = deltaheads - 1
         else:
             ret = deltaheads + 1
         return ret
 
     def deltaiter(self):
         """
         returns an iterator of the deltas in this changegroup
 
         Useful for passing to the underlying storage system to be stored.
         """
         chain = None
         for chunkdata in iter(lambda: self.deltachunk(chain), {}):
             # Chunkdata: (node, p1, p2, cs, deltabase, delta, flags)
             yield chunkdata
             chain = chunkdata[0]
 
 class cg2unpacker(cg1unpacker):
     """Unpacker for cg2 streams.
 
     cg2 streams add support for generaldelta, so the delta header
     format is slightly different. All other features about the data
     remain the same.
     """
     deltaheader = _CHANGEGROUPV2_DELTA_HEADER
     deltaheadersize = struct.calcsize(deltaheader)
     version = '02'
 
     def _deltaheader(self, headertuple, prevnode):
         node, p1, p2, deltabase, cs = headertuple
         flags = 0
         return node, p1, p2, deltabase, cs, flags
 
 class cg3unpacker(cg2unpacker):
     """Unpacker for cg3 streams.
 
     cg3 streams add support for exchanging treemanifests and revlog
     flags. It adds the revlog flags to the delta header and an empty chunk
     separating manifests and files.
     """
     deltaheader = _CHANGEGROUPV3_DELTA_HEADER
     deltaheadersize = struct.calcsize(deltaheader)
     version = '03'
     _grouplistcount = 2 # One list of manifests and one list of files
 
     def _deltaheader(self, headertuple, prevnode):
         node, p1, p2, deltabase, cs, flags = headertuple
         return node, p1, p2, deltabase, cs, flags
 
     def _unpackmanifests(self, repo, revmap, trp, prog):
         super(cg3unpacker, self)._unpackmanifests(repo, revmap, trp, prog)
         for chunkdata in iter(self.filelogheader, {}):
             # If we get here, there are directory manifests in the changegroup
             d = chunkdata["filename"]
             repo.ui.debug("adding %s revisions\n" % d)
             dirlog = repo.manifestlog._revlog.dirlog(d)
             deltas = self.deltaiter()
             if not dirlog.addgroup(deltas, revmap, trp):
                 raise error.Abort(_("received dir revlog group is empty"))
 
 class headerlessfixup(object):
     def __init__(self, fh, h):
         self._h = h
         self._fh = fh
     def read(self, n):
         if self._h:
             d, self._h = self._h[:n], self._h[n:]
             if len(d) < n:
                 d += readexactly(self._fh, n - len(d))
             return d
         return readexactly(self._fh, n)
 
 class cg1packer(object):
     deltaheader = _CHANGEGROUPV1_DELTA_HEADER
     version = '01'
     def __init__(self, repo, bundlecaps=None):
         """Given a source repo, construct a bundler.
 
         bundlecaps is optional and can be used to specify the set of
         capabilities which can be used to build the bundle. While bundlecaps is
         unused in core Mercurial, extensions rely on this feature to communicate
         capabilities to customize the changegroup packer.
         """
         # Set of capabilities we can use to build the bundle.
         if bundlecaps is None:
             bundlecaps = set()
         self._bundlecaps = bundlecaps
         # experimental config: bundle.reorder
         reorder = repo.ui.config('bundle', 'reorder')
         if reorder == 'auto':
             reorder = None
         else:
             reorder = stringutil.parsebool(reorder)
         self._repo = repo
         self._reorder = reorder
         self._progress = repo.ui.progress
         if self._repo.ui.verbose and not self._repo.ui.debugflag:
             self._verbosenote = self._repo.ui.note
         else:
             self._verbosenote = lambda s: None
 
     def close(self):
         return closechunk()
 
     def fileheader(self, fname):
         return chunkheader(len(fname)) + fname
 
     # Extracted both for clarity and for overriding in extensions.
     def _sortgroup(self, revlog, nodelist, lookup):
         """Sort nodes for change group and turn them into revnums."""
         # for generaldelta revlogs, we linearize the revs; this will both be
         # much quicker and generate a much smaller bundle
         if (revlog._generaldelta and self._reorder is None) or self._reorder:
             dag = dagutil.revlogdag(revlog)
             return dag.linearize(set(revlog.rev(n) for n in nodelist))
         else:
             return sorted([revlog.rev(n) for n in nodelist])
 
     def group(self, nodelist, revlog, lookup, units=None):
         """Calculate a delta group, yielding a sequence of changegroup chunks
         (strings).
 
         Given a list of changeset revs, return a set of deltas and
         metadata corresponding to nodes. The first delta is
         first parent(nodelist[0]) -> nodelist[0], the receiver is
         guaranteed to have this parent as it has all history before
         these changesets. In the case firstparent is nullrev the
         changegroup starts with a full revision.
 
         If units is not None, progress detail will be generated, units specifies
         the type of revlog that is touched (changelog, manifest, etc.).
         """
         # if we don't have any revisions touched by these changesets, bail
         if len(nodelist) == 0:
             yield self.close()
             return
 
         revs = self._sortgroup(revlog, nodelist, lookup)
 
         # add the parent of the first rev
         p = revlog.parentrevs(revs[0])[0]
         revs.insert(0, p)
 
         # build deltas
         total = len(revs) - 1
         msgbundling = _('bundling')
         for r in xrange(len(revs) - 1):
             if units is not None:
                 self._progress(msgbundling, r + 1, unit=units, total=total)
             prev, curr = revs[r], revs[r + 1]
             linknode = lookup(revlog.node(curr))
             for c in self.revchunk(revlog, curr, prev, linknode):
                 yield c
 
         if units is not None:
             self._progress(msgbundling, None)
         yield self.close()
 
     # filter any nodes that claim to be part of the known set
     def prune(self, revlog, missing, commonrevs):
         rr, rl = revlog.rev, revlog.linkrev
         return [n for n in missing if rl(rr(n)) not in commonrevs]
 
     def _packmanifests(self, dir, mfnodes, lookuplinknode):
         """Pack flat manifests into a changegroup stream."""
         assert not dir
         for chunk in self.group(mfnodes, self._repo.manifestlog._revlog,
                                 lookuplinknode, units=_('manifests')):
             yield chunk
 
     def _manifestsdone(self):
         return ''
 
     def generate(self, commonrevs, clnodes, fastpathlinkrev, source):
         '''yield a sequence of changegroup chunks (strings)'''
         repo = self._repo
         cl = repo.changelog
 
         clrevorder = {}
         mfs = {} # needed manifests
         fnodes = {} # needed file nodes
         changedfiles = set()
 
         # Callback for the changelog, used to collect changed files and manifest
         # nodes.
         # Returns the linkrev node (identity in the changelog case).
         def lookupcl(x):
             c = cl.read(x)
             clrevorder[x] = len(clrevorder)
             n = c[0]
             # record the first changeset introducing this manifest version
             mfs.setdefault(n, x)
             # Record a complete list of potentially-changed files in
             # this manifest.
             changedfiles.update(c[3])
             return x
 
         self._verbosenote(_('uncompressed size of bundle content:\n'))
         size = 0
         for chunk in self.group(clnodes, cl, lookupcl, units=_('changesets')):
             size += len(chunk)
             yield chunk
         self._verbosenote(_('%8.i (changelog)\n') % size)
 
         # We need to make sure that the linkrev in the changegroup refers to
         # the first changeset that introduced the manifest or file revision.
         # The fastpath is usually safer than the slowpath, because the filelogs
         # are walked in revlog order.
         #
         # When taking the slowpath with reorder=None and the manifest revlog
         # uses generaldelta, the manifest may be walked in the "wrong" order.
         # Without 'clrevorder', we would get an incorrect linkrev (see fix in
         # cc0ff93d0c0c).
         #
         # When taking the fastpath, we are only vulnerable to reordering
         # of the changelog itself. The changelog never uses generaldelta, so
         # it is only reordered when reorder=True. To handle this case, we
         # simply take the slowpath, which already has the 'clrevorder' logic.
         # This was also fixed in cc0ff93d0c0c.
         fastpathlinkrev = fastpathlinkrev and not self._reorder
         # Treemanifests don't work correctly with fastpathlinkrev
         # either, because we don't discover which directory nodes to
         # send along with files. This could probably be fixed.
         fastpathlinkrev = fastpathlinkrev and (
             'treemanifest' not in repo.requirements)
 
         for chunk in self.generatemanifests(commonrevs, clrevorder,
                 fastpathlinkrev, mfs, fnodes, source):
             yield chunk
         mfs.clear()
         clrevs = set(cl.rev(x) for x in clnodes)
 
         if not fastpathlinkrev:
             def linknodes(unused, fname):
                 return fnodes.get(fname, {})
         else:
             cln = cl.node
             def linknodes(filerevlog, fname):
                 llr = filerevlog.linkrev
                 fln = filerevlog.node
                 revs = ((r, llr(r)) for r in filerevlog)
                 return dict((fln(r), cln(lr)) for r, lr in revs if lr in clrevs)
 
         for chunk in self.generatefiles(changedfiles, linknodes, commonrevs,
                                         source):
             yield chunk
 
         yield self.close()
 
         if clnodes:
             repo.hook('outgoing', node=hex(clnodes[0]), source=source)
 
     def generatemanifests(self, commonrevs, clrevorder, fastpathlinkrev, mfs,
                           fnodes, source):
         """Returns an iterator of changegroup chunks containing manifests.
 
         `source` is unused here, but is used by extensions like remotefilelog to
         change what is sent based in pulls vs pushes, etc.
         """
         repo = self._repo
         mfl = repo.manifestlog
         dirlog = mfl._revlog.dirlog
         tmfnodes = {'': mfs}
 
         # Callback for the manifest, used to collect linkrevs for filelog
         # revisions.
         # Returns the linkrev node (collected in lookupcl).
         def makelookupmflinknode(dir, nodes):
             if fastpathlinkrev:
                 assert not dir
                 return mfs.__getitem__
 
             def lookupmflinknode(x):
                 """Callback for looking up the linknode for manifests.
 
                 Returns the linkrev node for the specified manifest.
 
                 SIDE EFFECT:
 
                 1) fclnodes gets populated with the list of relevant
                    file nodes if we're not using fastpathlinkrev
                 2) When treemanifests are in use, collects treemanifest nodes
                    to send
 
                 Note that this means manifests must be completely sent to
                 the client before you can trust the list of files and
                 treemanifests to send.
                 """
                 clnode = nodes[x]
                 mdata = mfl.get(dir, x).readfast(shallow=True)
                 for p, n, fl in mdata.iterentries():
                     if fl == 't': # subdirectory manifest
                         subdir = dir + p + '/'
                         tmfclnodes = tmfnodes.setdefault(subdir, {})
                         tmfclnode = tmfclnodes.setdefault(n, clnode)
                         if clrevorder[clnode] < clrevorder[tmfclnode]:
                             tmfclnodes[n] = clnode
                     else:
                         f = dir + p
                         fclnodes = fnodes.setdefault(f, {})
                         fclnode = fclnodes.setdefault(n, clnode)
                         if clrevorder[clnode] < clrevorder[fclnode]:
                             fclnodes[n] = clnode
                 return clnode
             return lookupmflinknode
 
         size = 0
         while tmfnodes:
             dir, nodes = tmfnodes.popitem()
             prunednodes = self.prune(dirlog(dir), nodes, commonrevs)
             if not dir or prunednodes:
                 for x in self._packmanifests(dir, prunednodes,
                                              makelookupmflinknode(dir, nodes)):
                     size += len(x)
                     yield x
         self._verbosenote(_('%8.i (manifests)\n') % size)
         yield self._manifestsdone()
 
     # The 'source' parameter is useful for extensions
     def generatefiles(self, changedfiles, linknodes, commonrevs, source):
         repo = self._repo
         progress = self._progress
         msgbundling = _('bundling')
 
         total = len(changedfiles)
         # for progress output
         msgfiles = _('files')
         for i, fname in enumerate(sorted(changedfiles)):
             filerevlog = repo.file(fname)
             if not filerevlog:
                 raise error.Abort(_("empty or missing file data for %s") %
                                   fname)
 
             linkrevnodes = linknodes(filerevlog, fname)
             # Lookup for filenodes, we collected the linkrev nodes above in the
             # fastpath case and with lookupmf in the slowpath case.
             def lookupfilelog(x):
                 return linkrevnodes[x]
 
             filenodes = self.prune(filerevlog, linkrevnodes, commonrevs)
             if filenodes:
                 progress(msgbundling, i + 1, item=fname, unit=msgfiles,
                          total=total)
                 h = self.fileheader(fname)
                 size = len(h)
                 yield h
                 for chunk in self.group(filenodes, filerevlog, lookupfilelog):
                     size += len(chunk)
                     yield chunk
                 self._verbosenote(_('%8.i  %s\n') % (size, fname))
         progress(msgbundling, None)
 
     def deltaparent(self, revlog, rev, p1, p2, prev):
         if not revlog.candelta(prev, rev):
             raise error.ProgrammingError('cg1 should not be used in this case')
         return prev
 
     def revchunk(self, revlog, rev, prev, linknode):
         node = revlog.node(rev)
         p1, p2 = revlog.parentrevs(rev)
         base = self.deltaparent(revlog, rev, p1, p2, prev)
 
         prefix = ''
         if revlog.iscensored(base) or revlog.iscensored(rev):
             try:
                 delta = revlog.revision(node, raw=True)
             except error.CensoredNodeError as e:
                 delta = e.tombstone
             if base == nullrev:
                 prefix = mdiff.trivialdiffheader(len(delta))
             else:
                 baselen = revlog.rawsize(base)
                 prefix = mdiff.replacediffheader(baselen, len(delta))
         elif base == nullrev:
             delta = revlog.revision(node, raw=True)
             prefix = mdiff.trivialdiffheader(len(delta))
         else:
             delta = revlog.revdiff(base, rev)
         p1n, p2n = revlog.parents(node)
         basenode = revlog.node(base)
         flags = revlog.flags(rev)
         meta = self.builddeltaheader(node, p1n, p2n, basenode, linknode, flags)
         meta += prefix
         l = len(meta) + len(delta)
         yield chunkheader(l)
         yield meta
         yield delta
     def builddeltaheader(self, node, p1n, p2n, basenode, linknode, flags):
         # do nothing with basenode, it is implicitly the previous one in HG10
         # do nothing with flags, it is implicitly 0 for cg1 and cg2
         return struct.pack(self.deltaheader, node, p1n, p2n, linknode)
 
 class cg2packer(cg1packer):
     version = '02'
     deltaheader = _CHANGEGROUPV2_DELTA_HEADER
 
     def __init__(self, repo, bundlecaps=None):
         super(cg2packer, self).__init__(repo, bundlecaps)
         if self._reorder is None:
             # Since generaldelta is directly supported by cg2, reordering
             # generally doesn't help, so we disable it by default (treating
             # bundle.reorder=auto just like bundle.reorder=False).
             self._reorder = False
 
     def deltaparent(self, revlog, rev, p1, p2, prev):
         dp = revlog.deltaparent(rev)
         if dp == nullrev and revlog.storedeltachains:
             # Avoid sending full revisions when delta parent is null. Pick prev
             # in that case. It's tempting to pick p1 in this case, as p1 will
             # be smaller in the common case. However, computing a delta against
             # p1 may require resolving the raw text of p1, which could be
             # expensive. The revlog caches should have prev cached, meaning
             # less CPU for changegroup generation. There is likely room to add
             # a flag and/or config option to control this behavior.
             base = prev
         elif dp == nullrev:
             # revlog is configured to use full snapshot for a reason,
             # stick to full snapshot.
             base = nullrev
         elif dp not in (p1, p2, prev):
             # Pick prev when we can't be sure remote has the base revision.
             return prev
         else:
             base = dp
         if base != nullrev and not revlog.candelta(base, rev):
             base = nullrev
         return base
 
     def builddeltaheader(self, node, p1n, p2n, basenode, linknode, flags):
         # Do nothing with flags, it is implicitly 0 in cg1 and cg2
         return struct.pack(self.deltaheader, node, p1n, p2n, basenode, linknode)
 
 class cg3packer(cg2packer):
     version = '03'
     deltaheader = _CHANGEGROUPV3_DELTA_HEADER
 
     def _packmanifests(self, dir, mfnodes, lookuplinknode):
         if dir:
             yield self.fileheader(dir)
 
         dirlog = self._repo.manifestlog._revlog.dirlog(dir)
         for chunk in self.group(mfnodes, dirlog, lookuplinknode,
                                 units=_('manifests')):
             yield chunk
 
     def _manifestsdone(self):
         return self.close()
 
     def builddeltaheader(self, node, p1n, p2n, basenode, linknode, flags):
         return struct.pack(
             self.deltaheader, node, p1n, p2n, basenode, linknode, flags)
 
 _packermap = {'01': (cg1packer, cg1unpacker),
              # cg2 adds support for exchanging generaldelta
              '02': (cg2packer, cg2unpacker),
              # cg3 adds support for exchanging revlog flags and treemanifests
              '03': (cg3packer, cg3unpacker),
 }
 
 def allsupportedversions(repo):
     versions = set(_packermap.keys())
     if not (repo.ui.configbool('experimental', 'changegroup3') or
             repo.ui.configbool('experimental', 'treemanifest') or
             'treemanifest' in repo.requirements):
         versions.discard('03')
     return versions
 
 # Changegroup versions that can be applied to the repo
 def supportedincomingversions(repo):
     return allsupportedversions(repo)
 
 # Changegroup versions that can be created from the repo
 def supportedoutgoingversions(repo):
     versions = allsupportedversions(repo)
     if 'treemanifest' in repo.requirements:
         # Versions 01 and 02 support only flat manifests and it's just too
         # expensive to convert between the flat manifest and tree manifest on
         # the fly. Since tree manifests are hashed differently, all of history
         # would have to be converted. Instead, we simply don't even pretend to
         # support versions 01 and 02.
         versions.discard('01')
         versions.discard('02')
     if NARROW_REQUIREMENT in repo.requirements:
         # Versions 01 and 02 don't support revlog flags, and we need to
         # support that for stripping and unbundling to work.
         versions.discard('01')
         versions.discard('02')
     if LFS_REQUIREMENT in repo.requirements:
         # Versions 01 and 02 don't support revlog flags, and we need to
         # mark LFS entries with REVIDX_EXTSTORED.
         versions.discard('01')
         versions.discard('02')
 
     return versions
 
 def localversion(repo):
     # Finds the best version to use for bundles that are meant to be used
     # locally, such as those from strip and shelve, and temporary bundles.
     return max(supportedoutgoingversions(repo))
 
 def safeversion(repo):
     # Finds the smallest version that it's safe to assume clients of the repo
     # will support. For example, all hg versions that support generaldelta also
     # support changegroup 02.
     versions = supportedoutgoingversions(repo)
     if 'generaldelta' in repo.requirements:
         versions.discard('01')
     assert versions
     return min(versions)
 
 def getbundler(version, repo, bundlecaps=None):
     assert version in supportedoutgoingversions(repo)
     return _packermap[version][0](repo, bundlecaps)
 
 def getunbundler(version, fh, alg, extras=None):
     return _packermap[version][1](fh, alg, extras=extras)
 
 def _changegroupinfo(repo, nodes, source):
     if repo.ui.verbose or source == 'bundle':
         repo.ui.status(_("%d changesets found\n") % len(nodes))
     if repo.ui.debugflag:
         repo.ui.debug("list of changesets:\n")
         for node in nodes:
             repo.ui.debug("%s\n" % hex(node))
 
 def makechangegroup(repo, outgoing, version, source, fastpath=False,
                     bundlecaps=None):
     cgstream = makestream(repo, outgoing, version, source,
                           fastpath=fastpath, bundlecaps=bundlecaps)
     return getunbundler(version, util.chunkbuffer(cgstream), None,
                         {'clcount': len(outgoing.missing) })
 
 def makestream(repo, outgoing, version, source, fastpath=False,
                bundlecaps=None):
     bundler = getbundler(version, repo, bundlecaps=bundlecaps)
 
     repo = repo.unfiltered()
     commonrevs = outgoing.common
     csets = outgoing.missing
     heads = outgoing.missingheads
     # We go through the fast path if we get told to, or if all (unfiltered
     # heads have been requested (since we then know there all linkrevs will
     # be pulled by the client).
     heads.sort()
     fastpathlinkrev = fastpath or (
             repo.filtername is None and heads == sorted(repo.heads()))
 
     repo.hook('preoutgoing', throw=True, source=source)
     _changegroupinfo(repo, csets, source)
     return bundler.generate(commonrevs, csets, fastpathlinkrev, source)
 
 def _addchangegroupfiles(repo, source, revmap, trp, expectedfiles, needfiles):
     revisions = 0
     files = 0
+    progress = repo.ui.makeprogress(_('files'), unit=_('files'),
+                                    total=expectedfiles)
     for chunkdata in iter(source.filelogheader, {}):
         files += 1
         f = chunkdata["filename"]
         repo.ui.debug("adding %s revisions\n" % f)
-        repo.ui.progress(_('files'), files, unit=_('files'),
-                         total=expectedfiles)
+        progress.increment()
         fl = repo.file(f)
         o = len(fl)
         try:
             deltas = source.deltaiter()
             if not fl.addgroup(deltas, revmap, trp):
                 raise error.Abort(_("received file revlog group is empty"))
         except error.CensoredBaseError as e:
             raise error.Abort(_("received delta base is censored: %s") % e)
         revisions += len(fl) - o
         if f in needfiles:
             needs = needfiles[f]
             for new in xrange(o, len(fl)):
                 n = fl.node(new)
                 if n in needs:
                     needs.remove(n)
                 else:
                     raise error.Abort(
                         _("received spurious file revlog entry"))
             if not needs:
                 del needfiles[f]
-    repo.ui.progress(_('files'), None)
+    progress.complete()
 
     for f, needs in needfiles.iteritems():
         fl = repo.file(f)
         for n in needs:
             try:
                 fl.rev(n)
             except error.LookupError:
                 raise error.Abort(
                     _('missing file data for %s:%s - run hg verify') %
                     (f, hex(n)))
 
     return revisions, files