histedit: hook afterresolvedstates

hgext/histedit.py

@@ -1,1461 +1,1463 b''
 # histedit.py - interactive history editing for mercurial
 #
 # Copyright 2009 Augie Fackler <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2 or any later version.
 """interactive history editing
 
 With this extension installed, Mercurial gains one new command: histedit. Usage
 is as follows, assuming the following history::
 
  @  3[tip]   7c2fd3b9020c   2009-04-27 18:04 -0500   durin42
  |    Add delta
  |
  o  2   030b686bedc4   2009-04-27 18:04 -0500   durin42
  |    Add gamma
  |
  o  1   c561b4e977df   2009-04-27 18:04 -0500   durin42
  |    Add beta
  |
  o  0   d8d2fcd0e319   2009-04-27 18:04 -0500   durin42
       Add alpha
 
 If you were to run ``hg histedit c561b4e977df``, you would see the following
 file open in your editor::
 
  pick c561b4e977df Add beta
  pick 030b686bedc4 Add gamma
  pick 7c2fd3b9020c Add delta
 
  # Edit history between c561b4e977df and 7c2fd3b9020c
  #
  # Commits are listed from least to most recent
  #
  # Commands:
  #  p, pick = use commit
  #  e, edit = use commit, but stop for amending
  #  f, fold = use commit, but combine it with the one above
  #  r, roll = like fold, but discard this commit's description
  #  d, drop = remove commit from history
  #  m, mess = edit commit message without changing commit content
  #
 
 In this file, lines beginning with ``#`` are ignored. You must specify a rule
 for each revision in your history. For example, if you had meant to add gamma
 before beta, and then wanted to add delta in the same revision as beta, you
 would reorganize the file to look like this::
 
  pick 030b686bedc4 Add gamma
  pick c561b4e977df Add beta
  fold 7c2fd3b9020c Add delta
 
  # Edit history between c561b4e977df and 7c2fd3b9020c
  #
  # Commits are listed from least to most recent
  #
  # Commands:
  #  p, pick = use commit
  #  e, edit = use commit, but stop for amending
  #  f, fold = use commit, but combine it with the one above
  #  r, roll = like fold, but discard this commit's description
  #  d, drop = remove commit from history
  #  m, mess = edit commit message without changing commit content
  #
 
 At which point you close the editor and ``histedit`` starts working. When you
 specify a ``fold`` operation, ``histedit`` will open an editor when it folds
 those revisions together, offering you a chance to clean up the commit message::
 
  Add beta
  ***
  Add delta
 
 Edit the commit message to your liking, then close the editor. For
 this example, let's assume that the commit message was changed to
 ``Add beta and delta.`` After histedit has run and had a chance to
 remove any old or temporary revisions it needed, the history looks
 like this::
 
  @  2[tip]   989b4d060121   2009-04-27 18:04 -0500   durin42
  |    Add beta and delta.
  |
  o  1   081603921c3f   2009-04-27 18:04 -0500   durin42
  |    Add gamma
  |
  o  0   d8d2fcd0e319   2009-04-27 18:04 -0500   durin42
       Add alpha
 
 Note that ``histedit`` does *not* remove any revisions (even its own temporary
 ones) until after it has completed all the editing operations, so it will
 probably perform several strip operations when it's done. For the above example,
 it had to run strip twice. Strip can be slow depending on a variety of factors,
 so you might need to be a little patient. You can choose to keep the original
 revisions by passing the ``--keep`` flag.
 
 The ``edit`` operation will drop you back to a command prompt,
 allowing you to edit files freely, or even use ``hg record`` to commit
 some changes as a separate commit. When you're done, any remaining
 uncommitted changes will be committed as well. When done, run ``hg
 histedit --continue`` to finish this step. You'll be prompted for a
 new commit message, but the default commit message will be the
 original message for the ``edit`` ed revision.
 
 The ``message`` operation will give you a chance to revise a commit
 message without changing the contents. It's a shortcut for doing
 ``edit`` immediately followed by `hg histedit --continue``.
 
 If ``histedit`` encounters a conflict when moving a revision (while
 handling ``pick`` or ``fold``), it'll stop in a similar manner to
 ``edit`` with the difference that it won't prompt you for a commit
 message when done. If you decide at this point that you don't like how
 much work it will be to rearrange history, or that you made a mistake,
 you can use ``hg histedit --abort`` to abandon the new changes you
 have made and return to the state before you attempted to edit your
 history.
 
 If we clone the histedit-ed example repository above and add four more
 changes, such that we have the following history::
 
    @  6[tip]   038383181893   2009-04-27 18:04 -0500   stefan
    |    Add theta
    |
    o  5   140988835471   2009-04-27 18:04 -0500   stefan
    |    Add eta
    |
    o  4   122930637314   2009-04-27 18:04 -0500   stefan
    |    Add zeta
    |
    o  3   836302820282   2009-04-27 18:04 -0500   stefan
    |    Add epsilon
    |
    o  2   989b4d060121   2009-04-27 18:04 -0500   durin42
    |    Add beta and delta.
    |
    o  1   081603921c3f   2009-04-27 18:04 -0500   durin42
    |    Add gamma
    |
    o  0   d8d2fcd0e319   2009-04-27 18:04 -0500   durin42
         Add alpha
 
 If you run ``hg histedit --outgoing`` on the clone then it is the same
 as running ``hg histedit 836302820282``. If you need plan to push to a
 repository that Mercurial does not detect to be related to the source
 repo, you can add a ``--force`` option.
 
 Config
 ------
 
 Histedit rule lines are truncated to 80 characters by default. You
 can customize this behavior by setting a different length in your
 configuration file::
 
   [histedit]
   linelen = 120      # truncate rule lines at 120 characters
 
 ``hg histedit`` attempts to automatically choose an appropriate base
 revision to use. To change which base revision is used, define a
 revset in your configuration file::
 
   [histedit]
   defaultrev = only(.) & draft()
 
 By default each edited revision needs to be present in histedit commands.
 To remove revision you need to use ``drop`` operation. You can configure
 the drop to be implicit for missing commits by adding:
 
   [histedit]
   dropmissing = True
 
 """
 
 import pickle
 import errno
 import os
 import sys
 
 from mercurial import bundle2
 from mercurial import cmdutil
 from mercurial import discovery
 from mercurial import error
 from mercurial import copies
 from mercurial import context
 from mercurial import destutil
 from mercurial import exchange
 from mercurial import extensions
 from mercurial import hg
 from mercurial import node
 from mercurial import repair
 from mercurial import scmutil
 from mercurial import util
 from mercurial import obsolete
 from mercurial import merge as mergemod
 from mercurial.lock import release
 from mercurial.i18n import _
 
 cmdtable = {}
 command = cmdutil.command(cmdtable)
 
 class _constraints(object):
     # aborts if there are multiple rules for one node
     noduplicates = 'noduplicates'
     # abort if the node does belong to edited stack
     forceother = 'forceother'
     # abort if the node doesn't belong to edited stack
     noother = 'noother'
 
     @classmethod
     def known(cls):
         return set([v for k, v in cls.__dict__.items() if k[0] != '_'])
 
 # Note for extension authors: ONLY specify testedwith = 'internal' for
 # extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
 # be specifying the version(s) of Mercurial they are tested with, or
 # leave the attribute unspecified.
 testedwith = 'internal'
 
 # i18n: command names and abbreviations must remain untranslated
 editcomment = _("""# Edit history between %s and %s
 #
 # Commits are listed from least to most recent
 #
 # Commands:
 #  p, pick = use commit
 #  e, edit = use commit, but stop for amending
 #  f, fold = use commit, but combine it with the one above
 #  r, roll = like fold, but discard this commit's description
 #  d, drop = remove commit from history
 #  m, mess = edit commit message without changing commit content
 #
 """)
 
 class histeditstate(object):
     def __init__(self, repo, parentctxnode=None, actions=None, keep=None,
             topmost=None, replacements=None, lock=None, wlock=None):
         self.repo = repo
         self.actions = actions
         self.keep = keep
         self.topmost = topmost
         self.parentctxnode = parentctxnode
         self.lock = lock
         self.wlock = wlock
         self.backupfile = None
         if replacements is None:
             self.replacements = []
         else:
             self.replacements = replacements
 
     def read(self):
         """Load histedit state from disk and set fields appropriately."""
         try:
             state = self.repo.vfs.read('histedit-state')
         except IOError as err:
             if err.errno != errno.ENOENT:
                 raise
             raise error.Abort(_('no histedit in progress'))
 
         if state.startswith('v1\n'):
             data = self._load()
             parentctxnode, rules, keep, topmost, replacements, backupfile = data
         else:
             data = pickle.loads(state)
             parentctxnode, rules, keep, topmost, replacements = data
             backupfile = None
 
         self.parentctxnode = parentctxnode
         rules = "\n".join(["%s %s" % (verb, rest) for [verb, rest] in rules])
         actions = parserules(rules, self)
         self.actions = actions
         self.keep = keep
         self.topmost = topmost
         self.replacements = replacements
         self.backupfile = backupfile
 
     def write(self):
         fp = self.repo.vfs('histedit-state', 'w')
         fp.write('v1\n')
         fp.write('%s\n' % node.hex(self.parentctxnode))
         fp.write('%s\n' % node.hex(self.topmost))
         fp.write('%s\n' % self.keep)
         fp.write('%d\n' % len(self.actions))
         for action in self.actions:
             fp.write('%s\n' % action.tostate())
         fp.write('%d\n' % len(self.replacements))
         for replacement in self.replacements:
             fp.write('%s%s\n' % (node.hex(replacement[0]), ''.join(node.hex(r)
                 for r in replacement[1])))
         backupfile = self.backupfile
         if not backupfile:
             backupfile = ''
         fp.write('%s\n' % backupfile)
         fp.close()
 
     def _load(self):
         fp = self.repo.vfs('histedit-state', 'r')
         lines = [l[:-1] for l in fp.readlines()]
 
         index = 0
         lines[index] # version number
         index += 1
 
         parentctxnode = node.bin(lines[index])
         index += 1
 
         topmost = node.bin(lines[index])
         index += 1
 
         keep = lines[index] == 'True'
         index += 1
 
         # Rules
         rules = []
         rulelen = int(lines[index])
         index += 1
         for i in xrange(rulelen):
             ruleaction = lines[index]
             index += 1
             rule = lines[index]
             index += 1
             rules.append((ruleaction, rule))
 
         # Replacements
         replacements = []
         replacementlen = int(lines[index])
         index += 1
         for i in xrange(replacementlen):
             replacement = lines[index]
             original = node.bin(replacement[:40])
             succ = [node.bin(replacement[i:i + 40]) for i in
                     range(40, len(replacement), 40)]
             replacements.append((original, succ))
             index += 1
 
         backupfile = lines[index]
         index += 1
 
         fp.close()
 
         return parentctxnode, rules, keep, topmost, replacements, backupfile
 
     def clear(self):
         if self.inprogress():
             self.repo.vfs.unlink('histedit-state')
 
     def inprogress(self):
         return self.repo.vfs.exists('histedit-state')
 
 
 class histeditaction(object):
     def __init__(self, state, node):
         self.state = state
         self.repo = state.repo
         self.node = node
 
     @classmethod
     def fromrule(cls, state, rule):
         """Parses the given rule, returning an instance of the histeditaction.
         """
         rulehash = rule.strip().split(' ', 1)[0]
         try:
             rev = node.bin(rulehash)
         except TypeError:
             raise error.ParseError("invalid changeset %s" % rulehash)
         return cls(state, rev)
 
     def verify(self, prev):
         """ Verifies semantic correctness of the rule"""
         repo = self.repo
         ha = node.hex(self.node)
         try:
             self.node = repo[ha].node()
         except error.RepoError:
             raise error.ParseError(_('unknown changeset %s listed')
                               % ha[:12])
 
     def torule(self):
         """build a histedit rule line for an action
 
         by default lines are in the form:
         <hash> <rev> <summary>
         """
         ctx = self.repo[self.node]
         summary = ''
         if ctx.description():
             summary = ctx.description().splitlines()[0]
         line = '%s %s %d %s' % (self.verb, ctx, ctx.rev(), summary)
         # trim to 75 columns by default so it's not stupidly wide in my editor
         # (the 5 more are left for verb)
         maxlen = self.repo.ui.configint('histedit', 'linelen', default=80)
         maxlen = max(maxlen, 22) # avoid truncating hash
         return util.ellipsis(line, maxlen)
 
     def tostate(self):
         """Print an action in format used by histedit state files
            (the first line is a verb, the remainder is the second)
         """
         return "%s\n%s" % (self.verb, node.hex(self.node))
 
     def constraints(self):
         """Return a set of constrains that this action should be verified for
         """
         return set([_constraints.noduplicates, _constraints.noother])
 
     def nodetoverify(self):
         """Returns a node associated with the action that will be used for
         verification purposes.
 
         If the action doesn't correspond to node it should return None
         """
         return self.node
 
     def run(self):
         """Runs the action. The default behavior is simply apply the action's
         rulectx onto the current parentctx."""
         self.applychange()
         self.continuedirty()
         return self.continueclean()
 
     def applychange(self):
         """Applies the changes from this action's rulectx onto the current
         parentctx, but does not commit them."""
         repo = self.repo
         rulectx = repo[self.node]
         hg.update(repo, self.state.parentctxnode, quietempty=True)
         stats = applychanges(repo.ui, repo, rulectx, {})
         if stats and stats[3] > 0:
             raise error.InterventionRequired(_('Fix up the change and run '
                                             'hg histedit --continue'))
 
     def continuedirty(self):
         """Continues the action when changes have been applied to the working
         copy. The default behavior is to commit the dirty changes."""
         repo = self.repo
         rulectx = repo[self.node]
 
         editor = self.commiteditor()
         commit = commitfuncfor(repo, rulectx)
 
         commit(text=rulectx.description(), user=rulectx.user(),
                date=rulectx.date(), extra=rulectx.extra(), editor=editor)
 
     def commiteditor(self):
         """The editor to be used to edit the commit message."""
         return False
 
     def continueclean(self):
         """Continues the action when the working copy is clean. The default
         behavior is to accept the current commit as the new version of the
         rulectx."""
         ctx = self.repo['.']
         if ctx.node() == self.state.parentctxnode:
             self.repo.ui.warn(_('%s: empty changeset\n') %
                               node.short(self.node))
             return ctx, [(self.node, tuple())]
         if ctx.node() == self.node:
             # Nothing changed
             return ctx, []
         return ctx, [(self.node, (ctx.node(),))]
 
 def commitfuncfor(repo, src):
     """Build a commit function for the replacement of <src>
 
     This function ensure we apply the same treatment to all changesets.
 
     - Add a 'histedit_source' entry in extra.
 
     Note that fold has its own separated logic because its handling is a bit
     different and not easily factored out of the fold method.
     """
     phasemin = src.phase()
     def commitfunc(**kwargs):
         phasebackup = repo.ui.backupconfig('phases', 'new-commit')
         try:
             repo.ui.setconfig('phases', 'new-commit', phasemin,
                               'histedit')
             extra = kwargs.get('extra', {}).copy()
             extra['histedit_source'] = src.hex()
             kwargs['extra'] = extra
             return repo.commit(**kwargs)
         finally:
             repo.ui.restoreconfig(phasebackup)
     return commitfunc
 
 def applychanges(ui, repo, ctx, opts):
     """Merge changeset from ctx (only) in the current working directory"""
     wcpar = repo.dirstate.parents()[0]
     if ctx.p1().node() == wcpar:
         # edits are "in place" we do not need to make any merge,
         # just applies changes on parent for editing
         cmdutil.revert(ui, repo, ctx, (wcpar, node.nullid), all=True)
         stats = None
     else:
         try:
             # ui.forcemerge is an internal variable, do not document
             repo.ui.setconfig('ui', 'forcemerge', opts.get('tool', ''),
                               'histedit')
             stats = mergemod.graft(repo, ctx, ctx.p1(), ['local', 'histedit'])
         finally:
             repo.ui.setconfig('ui', 'forcemerge', '', 'histedit')
     return stats
 
 def collapse(repo, first, last, commitopts, skipprompt=False):
     """collapse the set of revisions from first to last as new one.
 
     Expected commit options are:
         - message
         - date
         - username
     Commit message is edited in all cases.
 
     This function works in memory."""
     ctxs = list(repo.set('%d::%d', first, last))
     if not ctxs:
         return None
     for c in ctxs:
         if not c.mutable():
             raise error.ParseError(
                 _("cannot fold into public change %s") % node.short(c.node()))
     base = first.parents()[0]
 
     # commit a new version of the old changeset, including the update
     # collect all files which might be affected
     files = set()
     for ctx in ctxs:
         files.update(ctx.files())
 
     # Recompute copies (avoid recording a -> b -> a)
     copied = copies.pathcopies(base, last)
 
     # prune files which were reverted by the updates
     def samefile(f):
         if f in last.manifest():
             a = last.filectx(f)
             if f in base.manifest():
                 b = base.filectx(f)
                 return (a.data() == b.data()
                         and a.flags() == b.flags())
             else:
                 return False
         else:
             return f not in base.manifest()
     files = [f for f in files if not samefile(f)]
     # commit version of these files as defined by head
     headmf = last.manifest()
     def filectxfn(repo, ctx, path):
         if path in headmf:
             fctx = last[path]
             flags = fctx.flags()
             mctx = context.memfilectx(repo,
                                       fctx.path(), fctx.data(),
                                       islink='l' in flags,
                                       isexec='x' in flags,
                                       copied=copied.get(path))
             return mctx
         return None
 
     if commitopts.get('message'):
         message = commitopts['message']
     else:
         message = first.description()
     user = commitopts.get('user')
     date = commitopts.get('date')
     extra = commitopts.get('extra')
 
     parents = (first.p1().node(), first.p2().node())
     editor = None
     if not skipprompt:
         editor = cmdutil.getcommiteditor(edit=True, editform='histedit.fold')
     new = context.memctx(repo,
                          parents=parents,
                          text=message,
                          files=files,
                          filectxfn=filectxfn,
                          user=user,
                          date=date,
                          extra=extra,
                          editor=editor)
     return repo.commitctx(new)
 
 def _isdirtywc(repo):
     return repo[None].dirty(missing=True)
 
 def abortdirty():
     raise error.Abort(_('working copy has pending changes'),
         hint=_('amend, commit, or revert them and run histedit '
             '--continue, or abort with histedit --abort'))
 
 
 actiontable = {}
 actionlist = []
 
 def addhisteditaction(verbs):
     def wrap(cls):
         cls.verb = verbs[0]
         for verb in verbs:
             actiontable[verb] = cls
         actionlist.append(cls)
         return cls
     return wrap
 
 
 @addhisteditaction(['pick', 'p'])
 class pick(histeditaction):
     def run(self):
         rulectx = self.repo[self.node]
         if rulectx.parents()[0].node() == self.state.parentctxnode:
             self.repo.ui.debug('node %s unchanged\n' % node.short(self.node))
             return rulectx, []
 
         return super(pick, self).run()
 
 @addhisteditaction(['edit', 'e'])
 class edit(histeditaction):
     def run(self):
         repo = self.repo
         rulectx = repo[self.node]
         hg.update(repo, self.state.parentctxnode, quietempty=True)
         applychanges(repo.ui, repo, rulectx, {})
         raise error.InterventionRequired(
             _('Make changes as needed, you may commit or record as needed '
               'now.\nWhen you are finished, run hg histedit --continue to '
               'resume.'))
 
     def commiteditor(self):
         return cmdutil.getcommiteditor(edit=True, editform='histedit.edit')
 
 @addhisteditaction(['fold', 'f'])
 class fold(histeditaction):
     def verify(self, prev):
         """ Verifies semantic correctness of the fold rule"""
         super(fold, self).verify(prev)
         repo = self.repo
         if not prev:
             c = repo[self.node].parents()[0]
         elif not prev.verb in ('pick', 'base'):
             return
         else:
             c = repo[prev.node]
         if not c.mutable():
             raise error.ParseError(
                 _("cannot fold into public change %s") % node.short(c.node()))
 
 
     def continuedirty(self):
         repo = self.repo
         rulectx = repo[self.node]
 
         commit = commitfuncfor(repo, rulectx)
         commit(text='fold-temp-revision %s' % node.short(self.node),
                user=rulectx.user(), date=rulectx.date(),
                extra=rulectx.extra())
 
     def continueclean(self):
         repo = self.repo
         ctx = repo['.']
         rulectx = repo[self.node]
         parentctxnode = self.state.parentctxnode
         if ctx.node() == parentctxnode:
             repo.ui.warn(_('%s: empty changeset\n') %
                               node.short(self.node))
             return ctx, [(self.node, (parentctxnode,))]
 
         parentctx = repo[parentctxnode]
         newcommits = set(c.node() for c in repo.set('(%d::. - %d)', parentctx,
                                                  parentctx))
         if not newcommits:
             repo.ui.warn(_('%s: cannot fold - working copy is not a '
                            'descendant of previous commit %s\n') %
                            (node.short(self.node), node.short(parentctxnode)))
             return ctx, [(self.node, (ctx.node(),))]
 
         middlecommits = newcommits.copy()
         middlecommits.discard(ctx.node())
 
         return self.finishfold(repo.ui, repo, parentctx, rulectx, ctx.node(),
                                middlecommits)
 
     def skipprompt(self):
         """Returns true if the rule should skip the message editor.
 
         For example, 'fold' wants to show an editor, but 'rollup'
         doesn't want to.
         """
         return False
 
     def mergedescs(self):
         """Returns true if the rule should merge messages of multiple changes.
 
         This exists mainly so that 'rollup' rules can be a subclass of
         'fold'.
         """
         return True
 
     def finishfold(self, ui, repo, ctx, oldctx, newnode, internalchanges):
         parent = ctx.parents()[0].node()
         hg.update(repo, parent)
         ### prepare new commit data
         commitopts = {}
         commitopts['user'] = ctx.user()
         # commit message
         if not self.mergedescs():
             newmessage = ctx.description()
         else:
             newmessage = '\n***\n'.join(
                 [ctx.description()] +
                 [repo[r].description() for r in internalchanges] +
                 [oldctx.description()]) + '\n'
         commitopts['message'] = newmessage
         # date
         commitopts['date'] = max(ctx.date(), oldctx.date())
         extra = ctx.extra().copy()
         # histedit_source
         # note: ctx is likely a temporary commit but that the best we can do
         #       here. This is sufficient to solve issue3681 anyway.
         extra['histedit_source'] = '%s,%s' % (ctx.hex(), oldctx.hex())
         commitopts['extra'] = extra
         phasebackup = repo.ui.backupconfig('phases', 'new-commit')
         try:
             phasemin = max(ctx.phase(), oldctx.phase())
             repo.ui.setconfig('phases', 'new-commit', phasemin, 'histedit')
             n = collapse(repo, ctx, repo[newnode], commitopts,
                          skipprompt=self.skipprompt())
         finally:
             repo.ui.restoreconfig(phasebackup)
         if n is None:
             return ctx, []
         hg.update(repo, n)
         replacements = [(oldctx.node(), (newnode,)),
                         (ctx.node(), (n,)),
                         (newnode, (n,)),
                        ]
         for ich in internalchanges:
             replacements.append((ich, (n,)))
         return repo[n], replacements
 
 class base(histeditaction):
     def constraints(self):
         return set([_constraints.forceother])
 
     def run(self):
         if self.repo['.'].node() != self.node:
             mergemod.update(self.repo, self.node, False, True)
             #                                     branchmerge, force)
         return self.continueclean()
 
     def continuedirty(self):
         abortdirty()
 
     def continueclean(self):
         basectx = self.repo['.']
         return basectx, []
 
 @addhisteditaction(['_multifold'])
 class _multifold(fold):
     """fold subclass used for when multiple folds happen in a row
 
     We only want to fire the editor for the folded message once when
     (say) four changes are folded down into a single change. This is
     similar to rollup, but we should preserve both messages so that
     when the last fold operation runs we can show the user all the
     commit messages in their editor.
     """
     def skipprompt(self):
         return True
 
 @addhisteditaction(["roll", "r"])
 class rollup(fold):
     def mergedescs(self):
         return False
 
     def skipprompt(self):
         return True
 
 @addhisteditaction(["drop", "d"])
 class drop(histeditaction):
     def run(self):
         parentctx = self.repo[self.state.parentctxnode]
         return parentctx, [(self.node, tuple())]
 
 @addhisteditaction(["mess", "m"])
 class message(histeditaction):
     def commiteditor(self):
         return cmdutil.getcommiteditor(edit=True, editform='histedit.mess')
 
 def findoutgoing(ui, repo, remote=None, force=False, opts=None):
     """utility function to find the first outgoing changeset
 
     Used by initialization code"""
     if opts is None:
         opts = {}
     dest = ui.expandpath(remote or 'default-push', remote or 'default')
     dest, revs = hg.parseurl(dest, None)[:2]
     ui.status(_('comparing with %s\n') % util.hidepassword(dest))
 
     revs, checkout = hg.addbranchrevs(repo, repo, revs, None)
     other = hg.peer(repo, opts, dest)
 
     if revs:
         revs = [repo.lookup(rev) for rev in revs]
 
     outgoing = discovery.findcommonoutgoing(repo, other, revs, force=force)
     if not outgoing.missing:
         raise error.Abort(_('no outgoing ancestors'))
     roots = list(repo.revs("roots(%ln)", outgoing.missing))
     if 1 < len(roots):
         msg = _('there are ambiguous outgoing revisions')
         hint = _('see "hg help histedit" for more detail')
         raise error.Abort(msg, hint=hint)
     return repo.lookup(roots[0])
 
 
 @command('histedit',
     [('', 'commands', '',
       _('read history edits from the specified file'), _('FILE')),
      ('c', 'continue', False, _('continue an edit already in progress')),
      ('', 'edit-plan', False, _('edit remaining actions list')),
      ('k', 'keep', False,
       _("don't strip old nodes after edit is complete")),
      ('', 'abort', False, _('abort an edit in progress')),
      ('o', 'outgoing', False, _('changesets not found in destination')),
      ('f', 'force', False,
       _('force outgoing even for unrelated repositories')),
      ('r', 'rev', [], _('first revision to be edited'), _('REV'))],
      _("[ANCESTOR] | --outgoing [URL]"))
 def histedit(ui, repo, *freeargs, **opts):
     """interactively edit changeset history
 
     This command edits changesets between an ANCESTOR and the parent of
     the working directory.
 
     The value from the "histedit.defaultrev" config option is used as a
     revset to select the base revision when ANCESTOR is not specified.
     The first revision returned by the revset is used. By default, this
     selects the editable history that is unique to the ancestry of the
     working directory.
 
     With --outgoing, this edits changesets not found in the
     destination repository. If URL of the destination is omitted, the
     'default-push' (or 'default') path will be used.
 
     For safety, this command is also aborted if there are ambiguous
     outgoing revisions which may confuse users: for example, if there
     are multiple branches containing outgoing revisions.
 
     Use "min(outgoing() and ::.)" or similar revset specification
     instead of --outgoing to specify edit target revision exactly in
     such ambiguous situation. See :hg:`help revsets` for detail about
     selecting revisions.
 
     .. container:: verbose
 
        Examples:
 
          - A number of changes have been made.
            Revision 3 is no longer needed.
 
            Start history editing from revision 3::
 
              hg histedit -r 3
 
            An editor opens, containing the list of revisions,
            with specific actions specified::
 
              pick 5339bf82f0ca 3 Zworgle the foobar
              pick 8ef592ce7cc4 4 Bedazzle the zerlog
              pick 0a9639fcda9d 5 Morgify the cromulancy
 
            Additional information about the possible actions
            to take appears below the list of revisions.
 
            To remove revision 3 from the history,
            its action (at the beginning of the relevant line)
            is changed to 'drop'::
 
              drop 5339bf82f0ca 3 Zworgle the foobar
              pick 8ef592ce7cc4 4 Bedazzle the zerlog
              pick 0a9639fcda9d 5 Morgify the cromulancy
 
          - A number of changes have been made.
            Revision 2 and 4 need to be swapped.
 
            Start history editing from revision 2::
 
              hg histedit -r 2
 
            An editor opens, containing the list of revisions,
            with specific actions specified::
 
              pick 252a1af424ad 2 Blorb a morgwazzle
              pick 5339bf82f0ca 3 Zworgle the foobar
              pick 8ef592ce7cc4 4 Bedazzle the zerlog
 
            To swap revision 2 and 4, its lines are swapped
            in the editor::
 
              pick 8ef592ce7cc4 4 Bedazzle the zerlog
              pick 5339bf82f0ca 3 Zworgle the foobar
              pick 252a1af424ad 2 Blorb a morgwazzle
 
     Returns 0 on success, 1 if user intervention is required (not only
     for intentional "edit" command, but also for resolving unexpected
     conflicts).
     """
     state = histeditstate(repo)
     try:
         state.wlock = repo.wlock()
         state.lock = repo.lock()
         _histedit(ui, repo, state, *freeargs, **opts)
     finally:
         release(state.lock, state.wlock)
 
 def _histedit(ui, repo, state, *freeargs, **opts):
     # TODO only abort if we try to histedit mq patches, not just
     # blanket if mq patches are applied somewhere
     mq = getattr(repo, 'mq', None)
     if mq and mq.applied:
         raise error.Abort(_('source has mq patches applied'))
 
     # basic argument incompatibility processing
     outg = opts.get('outgoing')
     cont = opts.get('continue')
     editplan = opts.get('edit_plan')
     abort = opts.get('abort')
     force = opts.get('force')
     rules = opts.get('commands', '')
     revs = opts.get('rev', [])
     goal = 'new' # This invocation goal, in new, continue, abort
     if force and not outg:
         raise error.Abort(_('--force only allowed with --outgoing'))
     if cont:
         if any((outg, abort, revs, freeargs, rules, editplan)):
             raise error.Abort(_('no arguments allowed with --continue'))
         goal = 'continue'
     elif abort:
         if any((outg, revs, freeargs, rules, editplan)):
             raise error.Abort(_('no arguments allowed with --abort'))
         goal = 'abort'
     elif editplan:
         if any((outg, revs, freeargs)):
             raise error.Abort(_('only --commands argument allowed with '
                                '--edit-plan'))
         goal = 'edit-plan'
     else:
         if os.path.exists(os.path.join(repo.path, 'histedit-state')):
             raise error.Abort(_('history edit already in progress, try '
                                '--continue or --abort'))
         if outg:
             if revs:
                 raise error.Abort(_('no revisions allowed with --outgoing'))
             if len(freeargs) > 1:
                 raise error.Abort(
                     _('only one repo argument allowed with --outgoing'))
         else:
             revs.extend(freeargs)
             if len(revs) == 0:
                 defaultrev = destutil.desthistedit(ui, repo)
                 if defaultrev is not None:
                     revs.append(defaultrev)
 
             if len(revs) != 1:
                 raise error.Abort(
                     _('histedit requires exactly one ancestor revision'))
 
 
     replacements = []
     state.keep = opts.get('keep', False)
     supportsmarkers = obsolete.isenabled(repo, obsolete.createmarkersopt)
 
     # rebuild state
     if goal == 'continue':
         state.read()
         state = bootstrapcontinue(ui, state, opts)
     elif goal == 'edit-plan':
         state.read()
         if not rules:
             comment = editcomment % (node.short(state.parentctxnode),
                                      node.short(state.topmost))
             rules = ruleeditor(repo, ui, state.actions, comment)
         else:
             if rules == '-':
                 f = sys.stdin
             else:
                 f = open(rules)
             rules = f.read()
             f.close()
         actions = parserules(rules, state)
         ctxs = [repo[act.nodetoverify()] \
                 for act in state.actions if act.nodetoverify()]
         warnverifyactions(ui, repo, actions, state, ctxs)
         state.actions = actions
         state.write()
         return
     elif goal == 'abort':
         try:
             state.read()
             tmpnodes, leafs = newnodestoabort(state)
             ui.debug('restore wc to old parent %s\n'
                     % node.short(state.topmost))
 
             # Recover our old commits if necessary
             if not state.topmost in repo and state.backupfile:
                 backupfile = repo.join(state.backupfile)
                 f = hg.openpath(ui, backupfile)
                 gen = exchange.readbundle(ui, f, backupfile)
                 tr = repo.transaction('histedit.abort')
                 try:
                     if not isinstance(gen, bundle2.unbundle20):
                         gen.apply(repo, 'histedit', 'bundle:' + backupfile)
                     if isinstance(gen, bundle2.unbundle20):
                         bundle2.applybundle(repo, gen, tr,
                                             source='histedit',
                                             url='bundle:' + backupfile)
                     tr.close()
                 finally:
                     tr.release()
 
                 os.remove(backupfile)
 
             # check whether we should update away
             if repo.unfiltered().revs('parents() and (%n  or %ln::)',
                                     state.parentctxnode, leafs | tmpnodes):
                 hg.clean(repo, state.topmost, show_stats=True, quietempty=True)
             cleanupnode(ui, repo, 'created', tmpnodes)
             cleanupnode(ui, repo, 'temp', leafs)
         except Exception:
             if state.inprogress():
                 ui.warn(_('warning: encountered an exception during histedit '
                     '--abort; the repository may not have been completely '
                     'cleaned up\n'))
             raise
         finally:
                 state.clear()
         return
     else:
         cmdutil.checkunfinished(repo)
         cmdutil.bailifchanged(repo)
 
         topmost, empty = repo.dirstate.parents()
         if outg:
             if freeargs:
                 remote = freeargs[0]
             else:
                 remote = None
             root = findoutgoing(ui, repo, remote, force, opts)
         else:
             rr = list(repo.set('roots(%ld)', scmutil.revrange(repo, revs)))
             if len(rr) != 1:
                 raise error.Abort(_('The specified revisions must have '
                     'exactly one common root'))
             root = rr[0].node()
 
         revs = between(repo, root, topmost, state.keep)
         if not revs:
             raise error.Abort(_('%s is not an ancestor of working directory') %
                              node.short(root))
 
         ctxs = [repo[r] for r in revs]
         if not rules:
             comment = editcomment % (node.short(root), node.short(topmost))
             actions = [pick(state, r) for r in revs]
             rules = ruleeditor(repo, ui, actions, comment)
         else:
             if rules == '-':
                 f = sys.stdin
             else:
                 f = open(rules)
             rules = f.read()
             f.close()
         actions = parserules(rules, state)
         warnverifyactions(ui, repo, actions, state, ctxs)
 
         parentctxnode = repo[root].parents()[0].node()
 
         state.parentctxnode = parentctxnode
         state.actions = actions
         state.topmost = topmost
         state.replacements = replacements
 
         # Create a backup so we can always abort completely.
         backupfile = None
         if not obsolete.isenabled(repo, obsolete.createmarkersopt):
             backupfile = repair._bundle(repo, [parentctxnode], [topmost], root,
                                         'histedit')
         state.backupfile = backupfile
 
     # preprocess rules so that we can hide inner folds from the user
     # and only show one editor
     actions = state.actions[:]
     for idx, (action, nextact) in enumerate(
             zip(actions, actions[1:] + [None])):
         if action.verb == 'fold' and nextact and nextact.verb == 'fold':
             state.actions[idx].__class__ = _multifold
 
     total = len(state.actions)
     pos = 0
     while state.actions:
         state.write()
         actobj = state.actions.pop(0)
         pos += 1
         ui.progress(_("editing"), pos, actobj.torule(),
                     _('changes'), total)
         ui.debug('histedit: processing %s %s\n' % (actobj.verb,\
                                                    actobj.torule()))
         parentctx, replacement_ = actobj.run()
         state.parentctxnode = parentctx.node()
         state.replacements.extend(replacement_)
     state.write()
     ui.progress(_("editing"), None)
 
     hg.update(repo, state.parentctxnode, quietempty=True)
 
     mapping, tmpnodes, created, ntm = processreplacement(state)
     if mapping:
         for prec, succs in mapping.iteritems():
             if not succs:
                 ui.debug('histedit: %s is dropped\n' % node.short(prec))
             else:
                 ui.debug('histedit: %s is replaced by %s\n' % (
                     node.short(prec), node.short(succs[0])))
                 if len(succs) > 1:
                     m = 'histedit:                            %s'
                     for n in succs[1:]:
                         ui.debug(m % node.short(n))
 
     if supportsmarkers:
         # Only create markers if the temp nodes weren't already removed.
         obsolete.createmarkers(repo, ((repo[t],()) for t in sorted(tmpnodes)
                                        if t in repo))
     else:
         cleanupnode(ui, repo, 'temp', tmpnodes)
 
     if not state.keep:
         if mapping:
             movebookmarks(ui, repo, mapping, state.topmost, ntm)
             # TODO update mq state
         if supportsmarkers:
             markers = []
             # sort by revision number because it sound "right"
             for prec in sorted(mapping, key=repo.changelog.rev):
                 succs = mapping[prec]
                 markers.append((repo[prec],
                                 tuple(repo[s] for s in succs)))
             if markers:
                 obsolete.createmarkers(repo, markers)
         else:
             cleanupnode(ui, repo, 'replaced', mapping)
 
     state.clear()
     if os.path.exists(repo.sjoin('undo')):
         os.unlink(repo.sjoin('undo'))
     if repo.vfs.exists('histedit-last-edit.txt'):
         repo.vfs.unlink('histedit-last-edit.txt')
 
 def bootstrapcontinue(ui, state, opts):
     repo = state.repo
     if state.actions:
         actobj = state.actions.pop(0)
 
         if _isdirtywc(repo):
             actobj.continuedirty()
             if _isdirtywc(repo):
                 abortdirty()
 
         parentctx, replacements = actobj.continueclean()
 
         state.parentctxnode = parentctx.node()
         state.replacements.extend(replacements)
 
     return state
 
 def between(repo, old, new, keep):
     """select and validate the set of revision to edit
 
     When keep is false, the specified set can't have children."""
     ctxs = list(repo.set('%n::%n', old, new))
     if ctxs and not keep:
         if (not obsolete.isenabled(repo, obsolete.allowunstableopt) and
             repo.revs('(%ld::) - (%ld)', ctxs, ctxs)):
             raise error.Abort(_('cannot edit history that would orphan nodes'))
         if repo.revs('(%ld) and merge()', ctxs):
             raise error.Abort(_('cannot edit history that contains merges'))
         root = ctxs[0] # list is already sorted by repo.set
         if not root.mutable():
             raise error.Abort(_('cannot edit public changeset: %s') % root,
                              hint=_('see "hg help phases" for details'))
     return [c.node() for c in ctxs]
 
 def ruleeditor(repo, ui, actions, editcomment=""):
     """open an editor to edit rules
 
     rules are in the format [ [act, ctx], ...] like in state.rules
     """
     rules = '\n'.join([act.torule() for act in actions])
     rules += '\n\n'
     rules += editcomment
     rules = ui.edit(rules, ui.username(), {'prefix': 'histedit'})
 
     # Save edit rules in .hg/histedit-last-edit.txt in case
     # the user needs to ask for help after something
     # surprising happens.
     f = open(repo.join('histedit-last-edit.txt'), 'w')
     f.write(rules)
     f.close()
 
     return rules
 
 def parserules(rules, state):
     """Read the histedit rules string and return list of action objects """
     rules = [l for l in (r.strip() for r in rules.splitlines())
                 if l and not l.startswith('#')]
     actions = []
     for r in rules:
         if ' ' not in r:
             raise error.ParseError(_('malformed line "%s"') % r)
         verb, rest = r.split(' ', 1)
 
         if verb not in actiontable:
             raise error.ParseError(_('unknown action "%s"') % verb)
 
         action = actiontable[verb].fromrule(state, rest)
         actions.append(action)
     return actions
 
 def warnverifyactions(ui, repo, actions, state, ctxs):
     try:
         verifyactions(actions, state, ctxs)
     except error.ParseError:
         if repo.vfs.exists('histedit-last-edit.txt'):
             ui.warn(_('warning: histedit rules saved '
                       'to: .hg/histedit-last-edit.txt\n'))
         raise
 
 def verifyactions(actions, state, ctxs):
     """Verify that there exists exactly one action per given changeset and
     other constraints.
 
     Will abort if there are to many or too few rules, a malformed rule,
     or a rule on a changeset outside of the user-given range.
     """
     expected = set(c.hex() for c in ctxs)
     seen = set()
     prev = None
     for action in actions:
         action.verify(prev)
         prev = action
         constraints = action.constraints()
         for constraint in constraints:
             if constraint not in _constraints.known():
                 raise error.ParseError(_('unknown constraint "%s"') %
                         constraint)
 
         nodetoverify = action.nodetoverify()
         if nodetoverify is not None:
             ha = node.hex(nodetoverify)
             if _constraints.noother in constraints and ha not in expected:
                 raise error.ParseError(
                     _('may not use "%s" with changesets '
                       'other than the ones listed') % action.verb)
             if _constraints.forceother in constraints and ha in expected:
                 raise error.ParseError(
                     _('may not use "%s" with changesets '
                       'within the edited list') % action.verb)
             if _constraints.noduplicates in constraints and ha in seen:
                 raise error.ParseError(_(
                         'duplicated command for changeset %s') %
                         ha[:12])
             seen.add(ha)
     missing = sorted(expected - seen)  # sort to stabilize output
 
     if state.repo.ui.configbool('histedit', 'dropmissing'):
         drops = [drop(state, node.bin(n)) for n in missing]
         # put the in the beginning so they execute immediately and
         # don't show in the edit-plan in the future
         actions[:0] = drops
     elif missing:
         raise error.ParseError(_('missing rules for changeset %s') %
                 missing[0][:12],
                 hint=_('use "drop %s" to discard, see also: '
                        '"hg help -e histedit.config"') % missing[0][:12])
 
 def newnodestoabort(state):
     """process the list of replacements to return
 
     1) the list of final node
     2) the list of temporary node
 
     This is meant to be used on abort as less data are required in this case.
     """
     replacements = state.replacements
     allsuccs = set()
     replaced = set()
     for rep in replacements:
         allsuccs.update(rep[1])
         replaced.add(rep[0])
     newnodes = allsuccs - replaced
     tmpnodes = allsuccs & replaced
     return newnodes, tmpnodes
 
 
 def processreplacement(state):
     """process the list of replacements to return
 
     1) the final mapping between original and created nodes
     2) the list of temporary node created by histedit
     3) the list of new commit created by histedit"""
     replacements = state.replacements
     allsuccs = set()
     replaced = set()
     fullmapping = {}
     # initialize basic set
     # fullmapping records all operations recorded in replacement
     for rep in replacements:
         allsuccs.update(rep[1])
         replaced.add(rep[0])
         fullmapping.setdefault(rep[0], set()).update(rep[1])
     new = allsuccs - replaced
     tmpnodes = allsuccs & replaced
     # Reduce content fullmapping into direct relation between original nodes
     # and final node created during history edition
     # Dropped changeset are replaced by an empty list
     toproceed = set(fullmapping)
     final = {}
     while toproceed:
         for x in list(toproceed):
             succs = fullmapping[x]
             for s in list(succs):
                 if s in toproceed:
                     # non final node with unknown closure
                     # We can't process this now
                     break
                 elif s in final:
                     # non final node, replace with closure
                     succs.remove(s)
                     succs.update(final[s])
             else:
                 final[x] = succs
                 toproceed.remove(x)
     # remove tmpnodes from final mapping
     for n in tmpnodes:
         del final[n]
     # we expect all changes involved in final to exist in the repo
     # turn `final` into list (topologically sorted)
     nm = state.repo.changelog.nodemap
     for prec, succs in final.items():
         final[prec] = sorted(succs, key=nm.get)
 
     # computed topmost element (necessary for bookmark)
     if new:
         newtopmost = sorted(new, key=state.repo.changelog.rev)[-1]
     elif not final:
         # Nothing rewritten at all. we won't need `newtopmost`
         # It is the same as `oldtopmost` and `processreplacement` know it
         newtopmost = None
     else:
         # every body died. The newtopmost is the parent of the root.
         r = state.repo.changelog.rev
         newtopmost = state.repo[sorted(final, key=r)[0]].p1().node()
 
     return final, tmpnodes, new, newtopmost
 
 def movebookmarks(ui, repo, mapping, oldtopmost, newtopmost):
     """Move bookmark from old to newly created node"""
     if not mapping:
         # if nothing got rewritten there is not purpose for this function
         return
     moves = []
     for bk, old in sorted(repo._bookmarks.iteritems()):
         if old == oldtopmost:
             # special case ensure bookmark stay on tip.
             #
             # This is arguably a feature and we may only want that for the
             # active bookmark. But the behavior is kept compatible with the old
             # version for now.
             moves.append((bk, newtopmost))
             continue
         base = old
         new = mapping.get(base, None)
         if new is None:
             continue
         while not new:
             # base is killed, trying with parent
             base = repo[base].p1().node()
             new = mapping.get(base, (base,))
             # nothing to move
         moves.append((bk, new[-1]))
     if moves:
         lock = tr = None
         try:
             lock = repo.lock()
             tr = repo.transaction('histedit')
             marks = repo._bookmarks
             for mark, new in moves:
                 old = marks[mark]
                 ui.note(_('histedit: moving bookmarks %s from %s to %s\n')
                         % (mark, node.short(old), node.short(new)))
                 marks[mark] = new
             marks.recordchange(tr)
             tr.close()
         finally:
             release(tr, lock)
 
 def cleanupnode(ui, repo, name, nodes):
     """strip a group of nodes from the repository
 
     The set of node to strip may contains unknown nodes."""
     ui.debug('should strip %s nodes %s\n' %
              (name, ', '.join([node.short(n) for n in nodes])))
     lock = None
     try:
         lock = repo.lock()
         # do not let filtering get in the way of the cleanse
         # we should probably get rid of obsolescence marker created during the
         # histedit, but we currently do not have such information.
         repo = repo.unfiltered()
         # Find all nodes that need to be stripped
         # (we use %lr instead of %ln to silently ignore unknown items)
         nm = repo.changelog.nodemap
         nodes = sorted(n for n in nodes if n in nm)
         roots = [c.node() for c in repo.set("roots(%ln)", nodes)]
         for c in roots:
             # We should process node in reverse order to strip tip most first.
             # but this trigger a bug in changegroup hook.
             # This would reduce bundle overhead
             repair.strip(ui, repo, c)
     finally:
         release(lock)
 
 def stripwrapper(orig, ui, repo, nodelist, *args, **kwargs):
     if isinstance(nodelist, str):
         nodelist = [nodelist]
     if os.path.exists(os.path.join(repo.path, 'histedit-state')):
         state = histeditstate(repo)
         state.read()
         histedit_nodes = set([action.nodetoverify() for action
                              in state.actions if action.nodetoverify()])
         strip_nodes = set([repo[n].node() for n in nodelist])
         common_nodes = histedit_nodes & strip_nodes
         if common_nodes:
             raise error.Abort(_("histedit in progress, can't strip %s")
                              % ', '.join(node.short(x) for x in common_nodes))
     return orig(ui, repo, nodelist, *args, **kwargs)
 
 extensions.wrapfunction(repair, 'strip', stripwrapper)
 
 def summaryhook(ui, repo):
     if not os.path.exists(repo.join('histedit-state')):
         return
     state = histeditstate(repo)
     state.read()
     if state.actions:
         # i18n: column positioning for "hg summary"
         ui.write(_('hist:   %s (histedit --continue)\n') %
                  (ui.label(_('%d remaining'), 'histedit.remaining') %
                   len(state.actions)))
 
 def extsetup(ui):
     cmdutil.summaryhooks.add('histedit', summaryhook)
     cmdutil.unfinishedstates.append(
         ['histedit-state', False, True, _('histedit in progress'),
          _("use 'hg histedit --continue' or 'hg histedit --abort'")])
+    cmdutil.afterresolvedstates.append(
+        ['histedit-state', _('hg histedit --continue')])
     if ui.configbool("experimental", "histeditng"):
         globals()['base'] = addhisteditaction(['base', 'b'])(base)

tests/test-histedit-base.t

@@ -1,261 +1,262 b''
   $ . "$TESTDIR/histedit-helpers.sh"
 
   $ cat >> $HGRCPATH <<EOF
   > [alias]
   > tglog = log -G --template "{rev}:{node}:{phase} '{desc}'\n"
   > [extensions]
   > histedit=
   > [experimental]
   > histeditng=True
   > EOF
 
 Create repo a:
 
   $ hg init a
   $ cd a
   $ hg unbundle "$TESTDIR/bundles/rebase.hg"
   adding changesets
   adding manifests
   adding file changes
   added 8 changesets with 7 changes to 7 files (+2 heads)
   (run 'hg heads' to see heads, 'hg merge' to merge)
   $ hg up tip
   3 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
   $ hg tglog
   @  7:02de42196ebee42ef284b6780a87cdc96e8eaab6:draft 'H'
   |
   | o  6:eea13746799a9e0bfd88f29d3c2e9dc9389f524f:draft 'G'
   |/|
   o |  5:24b6387c8c8cae37178880f3fa95ded3cb1cf785:draft 'F'
   | |
   | o  4:9520eea781bcca16c1e15acc0ba14335a0e8e5ba:draft 'E'
   |/
   | o  3:32af7686d403cf45b5d95f2d70cebea587ac806a:draft 'D'
   | |
   | o  2:5fddd98957c8a54a4d436dfe1da9d87f21a1b97b:draft 'C'
   | |
   | o  1:42ccdea3bb16d28e1848c95fe2e44c000f3f21b1:draft 'B'
   |/
   o  0:cd010b8cd998f3981a5a8115f94f8da4ab506089:draft 'A'
   
 
 
 Go to D
   $ hg update 3
   3 files updated, 0 files merged, 2 files removed, 0 files unresolved
 edit the history to rebase B onto H
 
 
 Rebase B onto H
   $ hg histedit 1 --commands - 2>&1 << EOF | fixbundle
   > base 02de42196ebe
   > pick 42ccdea3bb16 B
   > pick 5fddd98957c8 C
   > pick 32af7686d403 D
   > EOF
 
   $ hg tglog
   @  7:0937e82309df47d14176ee15e45dbec5fbdef340:draft 'D'
   |
   o  6:f778d1cbddac4ab679d9983c9bb92e4c5e09e7fa:draft 'C'
   |
   o  5:3d41b7cc708545206213a842f96d812d2e73d818:draft 'B'
   |
   o  4:02de42196ebee42ef284b6780a87cdc96e8eaab6:draft 'H'
   |
   | o  3:eea13746799a9e0bfd88f29d3c2e9dc9389f524f:draft 'G'
   |/|
   o |  2:24b6387c8c8cae37178880f3fa95ded3cb1cf785:draft 'F'
   | |
   | o  1:9520eea781bcca16c1e15acc0ba14335a0e8e5ba:draft 'E'
   |/
   o  0:cd010b8cd998f3981a5a8115f94f8da4ab506089:draft 'A'
   
 Rebase back and drop something
   $ hg histedit 5 --commands - 2>&1 << EOF | fixbundle
   > base cd010b8cd998
   > pick 3d41b7cc7085 B
   > drop f778d1cbddac C
   > pick 0937e82309df D
   > EOF
 
   $ hg tglog
   @  6:476cc3e4168da2d036b141f7f7dcff7f8e3fe846:draft 'D'
   |
   o  5:d273e35dcdf21a7eb305192ef2e362887cd0a6f8:draft 'B'
   |
   | o  4:02de42196ebee42ef284b6780a87cdc96e8eaab6:draft 'H'
   | |
   | | o  3:eea13746799a9e0bfd88f29d3c2e9dc9389f524f:draft 'G'
   | |/|
   | o |  2:24b6387c8c8cae37178880f3fa95ded3cb1cf785:draft 'F'
   |/ /
   | o  1:9520eea781bcca16c1e15acc0ba14335a0e8e5ba:draft 'E'
   |/
   o  0:cd010b8cd998f3981a5a8115f94f8da4ab506089:draft 'A'
   
 Split stack
   $ hg histedit 5 --commands - 2>&1 << EOF | fixbundle
   > base cd010b8cd998
   > pick d273e35dcdf2 B
   > base cd010b8cd998
   > pick 476cc3e4168d D
   > EOF
 
   $ hg tglog
   @  6:d7a6f907a822c4ce6f15662ae45a42aa46d3818a:draft 'D'
   |
   | o  5:d273e35dcdf21a7eb305192ef2e362887cd0a6f8:draft 'B'
   |/
   | o  4:02de42196ebee42ef284b6780a87cdc96e8eaab6:draft 'H'
   | |
   | | o  3:eea13746799a9e0bfd88f29d3c2e9dc9389f524f:draft 'G'
   | |/|
   | o |  2:24b6387c8c8cae37178880f3fa95ded3cb1cf785:draft 'F'
   |/ /
   | o  1:9520eea781bcca16c1e15acc0ba14335a0e8e5ba:draft 'E'
   |/
   o  0:cd010b8cd998f3981a5a8115f94f8da4ab506089:draft 'A'
   
 Abort
   $ echo x > B
   $ hg add B
   $ hg commit -m "X"
   $ hg tglog
   @  7:591369deedfdcbf57471e894999a70d7f676186d:draft 'X'
   |
   o  6:d7a6f907a822c4ce6f15662ae45a42aa46d3818a:draft 'D'
   |
   | o  5:d273e35dcdf21a7eb305192ef2e362887cd0a6f8:draft 'B'
   |/
   | o  4:02de42196ebee42ef284b6780a87cdc96e8eaab6:draft 'H'
   | |
   | | o  3:eea13746799a9e0bfd88f29d3c2e9dc9389f524f:draft 'G'
   | |/|
   | o |  2:24b6387c8c8cae37178880f3fa95ded3cb1cf785:draft 'F'
   |/ /
   | o  1:9520eea781bcca16c1e15acc0ba14335a0e8e5ba:draft 'E'
   |/
   o  0:cd010b8cd998f3981a5a8115f94f8da4ab506089:draft 'A'
   
   $ hg histedit 6 --commands - 2>&1 << EOF | fixbundle
   > base d273e35dcdf2 B
   > drop d7a6f907a822 D
   > pick 591369deedfd X
   > EOF
   merging B
   warning: conflicts while merging B! (edit, then use 'hg resolve --mark')
   Fix up the change and run hg histedit --continue
   $ hg histedit --abort | fixbundle
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg tglog
   @  7:591369deedfdcbf57471e894999a70d7f676186d:draft 'X'
   |
   o  6:d7a6f907a822c4ce6f15662ae45a42aa46d3818a:draft 'D'
   |
   | o  5:d273e35dcdf21a7eb305192ef2e362887cd0a6f8:draft 'B'
   |/
   | o  4:02de42196ebee42ef284b6780a87cdc96e8eaab6:draft 'H'
   | |
   | | o  3:eea13746799a9e0bfd88f29d3c2e9dc9389f524f:draft 'G'
   | |/|
   | o |  2:24b6387c8c8cae37178880f3fa95ded3cb1cf785:draft 'F'
   |/ /
   | o  1:9520eea781bcca16c1e15acc0ba14335a0e8e5ba:draft 'E'
   |/
   o  0:cd010b8cd998f3981a5a8115f94f8da4ab506089:draft 'A'
   
 Continue
   $ hg histedit 6 --commands - 2>&1 << EOF | fixbundle
   > base d273e35dcdf2 B
   > drop d7a6f907a822 D
   > pick 591369deedfd X
   > EOF
   merging B
   warning: conflicts while merging B! (edit, then use 'hg resolve --mark')
   Fix up the change and run hg histedit --continue
   $ echo b2 > B
   $ hg resolve --mark B
   (no more unresolved files)
+  continue: hg histedit --continue
   $ hg histedit --continue | fixbundle
   $ hg tglog
   @  6:03772da75548bb42a8f1eacd8c91d0717a147fcd:draft 'X'
   |
   o  5:d273e35dcdf21a7eb305192ef2e362887cd0a6f8:draft 'B'
   |
   | o  4:02de42196ebee42ef284b6780a87cdc96e8eaab6:draft 'H'
   | |
   | | o  3:eea13746799a9e0bfd88f29d3c2e9dc9389f524f:draft 'G'
   | |/|
   | o |  2:24b6387c8c8cae37178880f3fa95ded3cb1cf785:draft 'F'
   |/ /
   | o  1:9520eea781bcca16c1e15acc0ba14335a0e8e5ba:draft 'E'
   |/
   o  0:cd010b8cd998f3981a5a8115f94f8da4ab506089:draft 'A'
   
 
 base on a previously picked changeset
   $ echo i > i
   $ hg add i
   $ hg commit -m "I"
   $ echo j > j
   $ hg add j
   $ hg commit -m "J"
   $ hg tglog
   @  8:e8c55b19d366b335626e805484110d1d5f6f2ea3:draft 'J'
   |
   o  7:b2f90fd8aa85db5569e3cfc30cd1d7739546368e:draft 'I'
   |
   o  6:03772da75548bb42a8f1eacd8c91d0717a147fcd:draft 'X'
   |
   o  5:d273e35dcdf21a7eb305192ef2e362887cd0a6f8:draft 'B'
   |
   | o  4:02de42196ebee42ef284b6780a87cdc96e8eaab6:draft 'H'
   | |
   | | o  3:eea13746799a9e0bfd88f29d3c2e9dc9389f524f:draft 'G'
   | |/|
   | o |  2:24b6387c8c8cae37178880f3fa95ded3cb1cf785:draft 'F'
   |/ /
   | o  1:9520eea781bcca16c1e15acc0ba14335a0e8e5ba:draft 'E'
   |/
   o  0:cd010b8cd998f3981a5a8115f94f8da4ab506089:draft 'A'
   
   $ hg histedit 5 --commands - 2>&1 << EOF | fixbundle
   > pick d273e35dcdf2 B
   > pick 03772da75548 X
   > base d273e35dcdf2 B
   > pick e8c55b19d366 J
   > base d273e35dcdf2 B
   > pick b2f90fd8aa85 I
   > EOF
   hg: parse error: may not use "base" with changesets within the edited list
 
   $ hg --config experimental.histeditng=False histedit 5 --commands - 2>&1 << EOF | fixbundle
   > base cd010b8cd998 A
   > pick d273e35dcdf2 B
   > pick 03772da75548 X
   > pick b2f90fd8aa85 I
   > pick e8c55b19d366 J
   > EOF
   hg: parse error: unknown action "base"
 
   $ hg tglog
   @  8:e8c55b19d366b335626e805484110d1d5f6f2ea3:draft 'J'
   |
   o  7:b2f90fd8aa85db5569e3cfc30cd1d7739546368e:draft 'I'
   |
   o  6:03772da75548bb42a8f1eacd8c91d0717a147fcd:draft 'X'
   |
   o  5:d273e35dcdf21a7eb305192ef2e362887cd0a6f8:draft 'B'
   |
   | o  4:02de42196ebee42ef284b6780a87cdc96e8eaab6:draft 'H'
   | |
   | | o  3:eea13746799a9e0bfd88f29d3c2e9dc9389f524f:draft 'G'
   | |/|
   | o |  2:24b6387c8c8cae37178880f3fa95ded3cb1cf785:draft 'F'
   |/ /
   | o  1:9520eea781bcca16c1e15acc0ba14335a0e8e5ba:draft 'E'
   |/
   o  0:cd010b8cd998f3981a5a8115f94f8da4ab506089:draft 'A'
   

tests/test-histedit-fold-non-commute.t

@@ -1,339 +1,343 b''
   $ . "$TESTDIR/histedit-helpers.sh"
 
   $ cat >> $HGRCPATH <<EOF
   > [extensions]
   > histedit=
   > EOF
 
   $ initrepo ()
   > {
   >     hg init $1
   >     cd $1
   >     for x in a b c d e f ; do
   >         echo $x$x$x$x$x > $x
   >         hg add $x
   >     done
   >     hg ci -m 'Initial commit'
   >     for x in a b c d e f ; do
   >         echo $x > $x
   >         hg ci -m $x
   >     done
   >     echo 'I can haz no commute' > e
   >     hg ci -m 'does not commute with e'
   >     cd ..
   > }
 
   $ initrepo r
   $ cd r
 Initial generation of the command files
 
   $ EDITED="$TESTTMP/editedhistory"
   $ hg log --template 'pick {node|short} {rev} {desc}\n' -r 3 >> $EDITED
   $ hg log --template 'pick {node|short} {rev} {desc}\n' -r 4 >> $EDITED
   $ hg log --template 'fold {node|short} {rev} {desc}\n' -r 7 >> $EDITED
   $ hg log --template 'pick {node|short} {rev} {desc}\n' -r 5 >> $EDITED
   $ hg log --template 'pick {node|short} {rev} {desc}\n' -r 6 >> $EDITED
   $ cat $EDITED
   pick 65a9a84f33fd 3 c
   pick 00f1c5383965 4 d
   fold 39522b764e3d 7 does not commute with e
   pick 7b4e2f4b7bcd 5 e
   pick 500cac37a696 6 f
 
 log before edit
   $ hg log --graph
   @  changeset:   7:39522b764e3d
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     does not commute with e
   |
   o  changeset:   6:500cac37a696
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     f
   |
   o  changeset:   5:7b4e2f4b7bcd
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     e
   |
   o  changeset:   4:00f1c5383965
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     d
   |
   o  changeset:   3:65a9a84f33fd
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     c
   |
   o  changeset:   2:da6535b52e45
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     b
   |
   o  changeset:   1:c1f09da44841
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     a
   |
   o  changeset:   0:1715188a53c7
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     Initial commit
   
 
 edit the history
   $ hg histedit 3 --commands $EDITED 2>&1 | fixbundle
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   merging e
   warning: conflicts while merging e! (edit, then use 'hg resolve --mark')
   Fix up the change and run hg histedit --continue
 
 fix up
   $ echo 'I can haz no commute' > e
   $ hg resolve --mark e
   (no more unresolved files)
+  continue: hg histedit --continue
   $ cat > cat.py <<EOF
   > import sys
   > print open(sys.argv[1]).read()
   > print
   > print
   > EOF
   $ HGEDITOR="python cat.py" hg histedit --continue 2>&1 | fixbundle | grep -v '2 files removed'
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   d
   ***
   does not commute with e
   
   
   
   HG: Enter commit message.  Lines beginning with 'HG:' are removed.
   HG: Leave message empty to abort commit.
   HG: --
   HG: user: test
   HG: branch 'default'
   HG: changed d
   HG: changed e
   
   
   
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   merging e
   warning: conflicts while merging e! (edit, then use 'hg resolve --mark')
   Fix up the change and run hg histedit --continue
 
 just continue this time
   $ hg revert -r 'p1()' e
   $ hg resolve --mark e
   (no more unresolved files)
+  continue: hg histedit --continue
   $ hg histedit --continue 2>&1 | fixbundle
   7b4e2f4b7bcd: empty changeset
 
 log after edit
   $ hg log --graph
   @  changeset:   5:d9cf42e54966
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     f
   |
   o  changeset:   4:10486af2e984
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     d
   |
   o  changeset:   3:65a9a84f33fd
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     c
   |
   o  changeset:   2:da6535b52e45
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     b
   |
   o  changeset:   1:c1f09da44841
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     a
   |
   o  changeset:   0:1715188a53c7
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     Initial commit
   
 
 contents of e
   $ hg cat e
   I can haz no commute
 
 manifest
   $ hg manifest
   a
   b
   c
   d
   e
   f
 
   $ cd ..
 
 Repeat test using "roll", not "fold". "roll" folds in changes but drops message
 
   $ initrepo r2
   $ cd r2
 
 Initial generation of the command files
 
   $ EDITED="$TESTTMP/editedhistory.2"
   $ hg log --template 'pick {node|short} {rev} {desc}\n' -r 3 >> $EDITED
   $ hg log --template 'pick {node|short} {rev} {desc}\n' -r 4 >> $EDITED
   $ hg log --template 'roll {node|short} {rev} {desc}\n' -r 7 >> $EDITED
   $ hg log --template 'pick {node|short} {rev} {desc}\n' -r 5 >> $EDITED
   $ hg log --template 'pick {node|short} {rev} {desc}\n' -r 6 >> $EDITED
   $ cat $EDITED
   pick 65a9a84f33fd 3 c
   pick 00f1c5383965 4 d
   roll 39522b764e3d 7 does not commute with e
   pick 7b4e2f4b7bcd 5 e
   pick 500cac37a696 6 f
 
 log before edit
   $ hg log --graph
   @  changeset:   7:39522b764e3d
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     does not commute with e
   |
   o  changeset:   6:500cac37a696
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     f
   |
   o  changeset:   5:7b4e2f4b7bcd
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     e
   |
   o  changeset:   4:00f1c5383965
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     d
   |
   o  changeset:   3:65a9a84f33fd
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     c
   |
   o  changeset:   2:da6535b52e45
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     b
   |
   o  changeset:   1:c1f09da44841
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     a
   |
   o  changeset:   0:1715188a53c7
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     Initial commit
   
 
 edit the history
   $ hg histedit 3 --commands $EDITED 2>&1 | fixbundle
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   merging e
   warning: conflicts while merging e! (edit, then use 'hg resolve --mark')
   Fix up the change and run hg histedit --continue
 
 fix up
   $ echo 'I can haz no commute' > e
   $ hg resolve --mark e
   (no more unresolved files)
+  continue: hg histedit --continue
   $ hg histedit --continue 2>&1 | fixbundle | grep -v '2 files removed'
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   merging e
   warning: conflicts while merging e! (edit, then use 'hg resolve --mark')
   Fix up the change and run hg histedit --continue
 
 just continue this time
   $ hg revert -r 'p1()' e
   $ hg resolve --mark e
   (no more unresolved files)
+  continue: hg histedit --continue
   $ hg histedit --continue 2>&1 | fixbundle
   7b4e2f4b7bcd: empty changeset
 
 log after edit
   $ hg log --graph
   @  changeset:   5:e7c4f5d4eb75
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     f
   |
   o  changeset:   4:803d1bb561fc
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     d
   |
   o  changeset:   3:65a9a84f33fd
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     c
   |
   o  changeset:   2:da6535b52e45
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     b
   |
   o  changeset:   1:c1f09da44841
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     a
   |
   o  changeset:   0:1715188a53c7
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     Initial commit
   
 
 contents of e
   $ hg cat e
   I can haz no commute
 
 manifest
   $ hg manifest
   a
   b
   c
   d
   e
   f
 
 description is taken from rollup target commit
 
   $ hg log --debug --rev 4
   changeset:   4:803d1bb561fceac3129ec778db9da249a3106fc3
   phase:       draft
   parent:      3:65a9a84f33fdeb1ad5679b3941ec885d2b24027b
   parent:      -1:0000000000000000000000000000000000000000
   manifest:    4:b068a323d969f22af1296ec6a5ea9384cef437ac
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   files:       d e
   extra:       branch=default
   extra:       histedit_source=00f1c53839651fa5c76d423606811ea5455a79d0,39522b764e3d26103f08bd1fa2ccd3e3d7dbcf4e
   description:
   d
   
   
 
 done with repo r2
 
   $ cd ..

tests/test-histedit-fold.t

@@ -1,559 +1,561 b''
 Test histedit extension: Fold commands
 ======================================
 
 This test file is dedicated to testing the fold command in non conflicting
 case.
 
 Initialization
 ---------------
 
 
   $ . "$TESTDIR/histedit-helpers.sh"
 
   $ cat >> $HGRCPATH <<EOF
   > [alias]
   > logt = log --template '{rev}:{node|short} {desc|firstline}\n'
   > [extensions]
   > histedit=
   > EOF
 
 
 Simple folding
 --------------------
   $ initrepo ()
   > {
   >     hg init r
   >     cd r
   >     for x in a b c d e f ; do
   >         echo $x > $x
   >         hg add $x
   >         hg ci -m $x
   >     done
   > }
 
   $ initrepo
 
 log before edit
   $ hg logt --graph
   @  5:652413bf663e f
   |
   o  4:e860deea161a e
   |
   o  3:055a42cdd887 d
   |
   o  2:177f92b77385 c
   |
   o  1:d2ae7f538514 b
   |
   o  0:cb9a9f314b8b a
   
 
   $ hg histedit 177f92b77385 --commands - 2>&1 <<EOF | fixbundle
   > pick e860deea161a e
   > pick 652413bf663e f
   > fold 177f92b77385 c
   > pick 055a42cdd887 d
   > EOF
   0 files updated, 0 files merged, 4 files removed, 0 files unresolved
   0 files updated, 0 files merged, 2 files removed, 0 files unresolved
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
 log after edit
   $ hg logt --graph
   @  4:9c277da72c9b d
   |
   o  3:6de59d13424a f
   |
   o  2:ee283cb5f2d5 e
   |
   o  1:d2ae7f538514 b
   |
   o  0:cb9a9f314b8b a
   
 
 post-fold manifest
   $ hg manifest
   a
   b
   c
   d
   e
   f
 
 
 check histedit_source
 
   $ hg log --debug --rev 3
   changeset:   3:6de59d13424a8a13acd3e975514aed29dd0d9b2d
   phase:       draft
   parent:      2:ee283cb5f2d5955443f23a27b697a04339e9a39a
   parent:      -1:0000000000000000000000000000000000000000
   manifest:    3:81eede616954057198ead0b2c73b41d1f392829a
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   files+:      c f
   extra:       branch=default
   extra:       histedit_source=a4f7421b80f79fcc59fff01bcbf4a53d127dd6d3,177f92b773850b59254aa5e923436f921b55483b
   description:
   f
   ***
   c
   
   
 
 rollup will fold without preserving the folded commit's message
 
   $ OLDHGEDITOR=$HGEDITOR
   $ HGEDITOR=false
   $ hg histedit d2ae7f538514 --commands - 2>&1 <<EOF | fixbundle
   > pick d2ae7f538514 b
   > roll ee283cb5f2d5 e
   > pick 6de59d13424a f
   > pick 9c277da72c9b d
   > EOF
   0 files updated, 0 files merged, 4 files removed, 0 files unresolved
   0 files updated, 0 files merged, 2 files removed, 0 files unresolved
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
   $ HGEDITOR=$OLDHGEDITOR
 
 log after edit
   $ hg logt --graph
   @  3:c4a9eb7989fc d
   |
   o  2:8e03a72b6f83 f
   |
   o  1:391ee782c689 b
   |
   o  0:cb9a9f314b8b a
   
 
 description is taken from rollup target commit
 
   $ hg log --debug --rev 1
   changeset:   1:391ee782c68930be438ccf4c6a403daedbfbffa5
   phase:       draft
   parent:      0:cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b
   parent:      -1:0000000000000000000000000000000000000000
   manifest:    1:b5e112a3a8354e269b1524729f0918662d847c38
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   files+:      b e
   extra:       branch=default
   extra:       histedit_source=d2ae7f538514cd87c17547b0de4cea71fe1af9fb,ee283cb5f2d5955443f23a27b697a04339e9a39a
   description:
   b
   
   
 
 check saving last-message.txt
 
   $ cat > $TESTTMP/abortfolding.py <<EOF
   > from mercurial import util
   > def abortfolding(ui, repo, hooktype, **kwargs):
   >     ctx = repo[kwargs.get('node')]
   >     if set(ctx.files()) == set(['c', 'd', 'f']):
   >         return True # abort folding commit only
   >     ui.warn('allow non-folding commit\\n')
   > EOF
   $ cat > .hg/hgrc <<EOF
   > [hooks]
   > pretxncommit.abortfolding = python:$TESTTMP/abortfolding.py:abortfolding
   > EOF
 
   $ cat > $TESTTMP/editor.sh << EOF
   > echo "==== before editing"
   > cat \$1
   > echo "===="
   > echo "check saving last-message.txt" >> \$1
   > EOF
 
   $ rm -f .hg/last-message.txt
   $ hg status --rev '8e03a72b6f83^1::c4a9eb7989fc'
   A c
   A d
   A f
   $ HGEDITOR="sh $TESTTMP/editor.sh" hg histedit 8e03a72b6f83 --commands - 2>&1 <<EOF
   > pick 8e03a72b6f83 f
   > fold c4a9eb7989fc d
   > EOF
   0 files updated, 0 files merged, 1 files removed, 0 files unresolved
   adding d
   allow non-folding commit
   0 files updated, 0 files merged, 3 files removed, 0 files unresolved
   ==== before editing
   f
   ***
   c
   ***
   d
   
   
   
   HG: Enter commit message.  Lines beginning with 'HG:' are removed.
   HG: Leave message empty to abort commit.
   HG: --
   HG: user: test
   HG: branch 'default'
   HG: added c
   HG: added d
   HG: added f
   ====
   transaction abort!
   rollback completed
   abort: pretxncommit.abortfolding hook failed
   [255]
 
   $ cat .hg/last-message.txt
   f
   ***
   c
   ***
   d
   
   
   
   check saving last-message.txt
 
   $ cd ..
   $ rm -r r
 
 folding preserves initial author
 --------------------------------
 
   $ initrepo
 
   $ hg ci --user "someone else" --amend --quiet
 
 tip before edit
   $ hg log --rev .
   changeset:   5:a00ad806cb55
   tag:         tip
   user:        someone else
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     f
   
 
   $ hg --config progress.debug=1 --debug \
   > histedit e860deea161a --commands - 2>&1 <<EOF | \
   > egrep 'editing|unresolved'
   > pick e860deea161a e
   > fold a00ad806cb55 f
   > EOF
   editing: pick e860deea161a 4 e 1/2 changes (50.00%)
   editing: fold a00ad806cb55 5 f 2/2 changes (100.00%)
   0 files updated, 0 files merged, 1 files removed, 0 files unresolved
   0 files updated, 0 files merged, 2 files removed, 0 files unresolved
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
 tip after edit
   $ hg log --rev .
   changeset:   4:698d4e8040a1
   tag:         tip
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     e
   
 
   $ cd ..
   $ rm -r r
 
 folding and creating no new change doesn't break:
 -------------------------------------------------
 
 folded content is dropped during a merge. The folded commit should properly disappear.
 
   $ mkdir fold-to-empty-test
   $ cd fold-to-empty-test
   $ hg init
   $ printf "1\n2\n3\n" > file
   $ hg add file
   $ hg commit -m '1+2+3'
   $ echo 4 >> file
   $ hg commit -m '+4'
   $ echo 5 >> file
   $ hg commit -m '+5'
   $ echo 6 >> file
   $ hg commit -m '+6'
   $ hg logt --graph
   @  3:251d831eeec5 +6
   |
   o  2:888f9082bf99 +5
   |
   o  1:617f94f13c0f +4
   |
   o  0:0189ba417d34 1+2+3
   
 
   $ hg histedit 1 --commands - << EOF
   > pick 617f94f13c0f 1 +4
   > drop 888f9082bf99 2 +5
   > fold 251d831eeec5 3 +6
   > EOF
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   merging file
   warning: conflicts while merging file! (edit, then use 'hg resolve --mark')
   Fix up the change and run hg histedit --continue
   [1]
 There were conflicts, we keep P1 content. This
 should effectively drop the changes from +6.
   $ hg status
   M file
   ? file.orig
   $ hg resolve -l
   U file
   $ hg revert -r 'p1()' file
   $ hg resolve --mark file
   (no more unresolved files)
+  continue: hg histedit --continue
   $ hg histedit --continue
   251d831eeec5: empty changeset
   saved backup bundle to $TESTTMP/*-backup.hg (glob)
   $ hg logt --graph
   @  1:617f94f13c0f +4
   |
   o  0:0189ba417d34 1+2+3
   
 
   $ cd ..
 
 
 Test fold through dropped
 -------------------------
 
 
 Test corner case where folded revision is separated from its parent by a
 dropped revision.
 
 
   $ hg init fold-with-dropped
   $ cd fold-with-dropped
   $ printf "1\n2\n3\n" > file
   $ hg commit -Am '1+2+3'
   adding file
   $ echo 4 >> file
   $ hg commit -m '+4'
   $ echo 5 >> file
   $ hg commit -m '+5'
   $ echo 6 >> file
   $ hg commit -m '+6'
   $ hg logt -G
   @  3:251d831eeec5 +6
   |
   o  2:888f9082bf99 +5
   |
   o  1:617f94f13c0f +4
   |
   o  0:0189ba417d34 1+2+3
   
   $ hg histedit 1 --commands -  << EOF
   > pick 617f94f13c0f 1 +4
   > drop 888f9082bf99 2 +5
   > fold 251d831eeec5 3 +6
   > EOF
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   merging file
   warning: conflicts while merging file! (edit, then use 'hg resolve --mark')
   Fix up the change and run hg histedit --continue
   [1]
   $ cat > file << EOF
   > 1
   > 2
   > 3
   > 4
   > 5
   > EOF
   $ hg resolve --mark file
   (no more unresolved files)
+  continue: hg histedit --continue
   $ hg commit -m '+5.2'
   created new head
   $ echo 6 >> file
   $ HGEDITOR=cat hg histedit --continue
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   +4
   ***
   +5.2
   ***
   +6
   
   
   
   HG: Enter commit message.  Lines beginning with 'HG:' are removed.
   HG: Leave message empty to abort commit.
   HG: --
   HG: user: test
   HG: branch 'default'
   HG: changed file
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   saved backup bundle to $TESTTMP/fold-with-dropped/.hg/strip-backup/55c8d8dc79ce-4066cd98-backup.hg (glob)
   saved backup bundle to $TESTTMP/fold-with-dropped/.hg/strip-backup/617f94f13c0f-a35700fc-backup.hg (glob)
   $ hg logt -G
   @  1:10c647b2cdd5 +4
   |
   o  0:0189ba417d34 1+2+3
   
   $ hg export tip
   # HG changeset patch
   # User test
   # Date 0 0
   #      Thu Jan 01 00:00:00 1970 +0000
   # Node ID 10c647b2cdd54db0603ecb99b2ff5ce66d5a5323
   # Parent  0189ba417d34df9dda55f88b637dcae9917b5964
   +4
   ***
   +5.2
   ***
   +6
   
   diff -r 0189ba417d34 -r 10c647b2cdd5 file
   --- a/file	Thu Jan 01 00:00:00 1970 +0000
   +++ b/file	Thu Jan 01 00:00:00 1970 +0000
   @@ -1,3 +1,6 @@
    1
    2
    3
   +4
   +5
   +6
   $ cd ..
 
 
 Folding with initial rename (issue3729)
 ---------------------------------------
 
   $ hg init fold-rename
   $ cd fold-rename
   $ echo a > a.txt
   $ hg add a.txt
   $ hg commit -m a
   $ hg rename a.txt b.txt
   $ hg commit -m rename
   $ echo b >> b.txt
   $ hg commit -m b
 
   $ hg logt --follow b.txt
   2:e0371e0426bc b
   1:1c4f440a8085 rename
   0:6c795aa153cb a
 
   $ hg histedit 1c4f440a8085 --commands - 2>&1 << EOF | fixbundle
   > pick 1c4f440a8085 rename
   > fold e0371e0426bc b
   > EOF
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   reverting b.txt
   1 files updated, 0 files merged, 1 files removed, 0 files unresolved
   1 files updated, 0 files merged, 1 files removed, 0 files unresolved
 
   $ hg logt --follow b.txt
   1:cf858d235c76 rename
   0:6c795aa153cb a
 
   $ cd ..
 
 Folding with swapping
 ---------------------
 
 This is an excuse to test hook with histedit temporary commit (issue4422)
 
 
   $ hg init issue4422
   $ cd issue4422
   $ echo a > a.txt
   $ hg add a.txt
   $ hg commit -m a
   $ echo b > b.txt
   $ hg add b.txt
   $ hg commit -m b
   $ echo c > c.txt
   $ hg add c.txt
   $ hg commit -m c
 
   $ hg logt
   2:a1a953ffb4b0 c
   1:199b6bb90248 b
   0:6c795aa153cb a
 
 Setup the proper environment variable symbol for the platform, to be subbed
 into the hook command.
 #if windows
   $ NODE="%HG_NODE%"
 #else
   $ NODE="\$HG_NODE"
 #endif
   $ hg histedit 6c795aa153cb --config hooks.commit="echo commit $NODE" --commands - 2>&1 << EOF | fixbundle
   > pick 199b6bb90248 b
   > fold a1a953ffb4b0 c
   > pick 6c795aa153cb a
   > EOF
   0 files updated, 0 files merged, 3 files removed, 0 files unresolved
   0 files updated, 0 files merged, 2 files removed, 0 files unresolved
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   commit 9599899f62c05f4377548c32bf1c9f1a39634b0c
 
   $ hg logt
   1:9599899f62c0 a
   0:79b99e9c8e49 b
 
   $ echo "foo" > amended.txt
   $ hg add amended.txt
   $ hg ci -q --config extensions.largefiles= --amend -I amended.txt
 
 Test that folding multiple changes in a row doesn't show multiple
 editors.
 
   $ echo foo >> foo
   $ hg add foo
   $ hg ci -m foo1
   $ echo foo >> foo
   $ hg ci -m foo2
   $ echo foo >> foo
   $ hg ci -m foo3
   $ hg logt
   4:21679ff7675c foo3
   3:b7389cc4d66e foo2
   2:0e01aeef5fa8 foo1
   1:578c7455730c a
   0:79b99e9c8e49 b
   $ cat > "$TESTTMP/editor.sh" <<EOF
   > echo ran editor >> "$TESTTMP/editorlog.txt"
   > cat \$1 >> "$TESTTMP/editorlog.txt"
   > echo END >> "$TESTTMP/editorlog.txt"
   > echo merged foos > \$1
   > EOF
   $ HGEDITOR="sh \"$TESTTMP/editor.sh\"" hg histedit 1 --commands - 2>&1 <<EOF | fixbundle
   > pick 578c7455730c 1 a
   > pick 0e01aeef5fa8 2 foo1
   > fold b7389cc4d66e 3 foo2
   > fold 21679ff7675c 4 foo3
   > EOF
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   reverting foo
   0 files updated, 0 files merged, 1 files removed, 0 files unresolved
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   merging foo
   0 files updated, 0 files merged, 1 files removed, 0 files unresolved
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg logt
   2:e8bedbda72c1 merged foos
   1:578c7455730c a
   0:79b99e9c8e49 b
 Editor should have run only once
   $ cat $TESTTMP/editorlog.txt
   ran editor
   foo1
   ***
   foo2
   ***
   foo3
   
   
   
   HG: Enter commit message.  Lines beginning with 'HG:' are removed.
   HG: Leave message empty to abort commit.
   HG: --
   HG: user: test
   HG: branch 'default'
   HG: added foo
   END
 
   $ cd ..

tests/test-histedit-non-commute.t

@@ -1,289 +1,293 b''
   $ . "$TESTDIR/histedit-helpers.sh"
 
   $ cat >> $HGRCPATH <<EOF
   > [extensions]
   > histedit=
   > EOF
 
   $ initrepo ()
   > {
   >     hg init $1
   >     cd $1
   >     for x in a b c d e f ; do
   >         echo $x$x$x$x$x > $x
   >         hg add $x
   >     done
   >     hg ci -m 'Initial commit'
   >     for x in a b c d e f ; do
   >         echo $x > $x
   >         hg ci -m $x
   >     done
   >     echo 'I can haz no commute' > e
   >     hg ci -m 'does not commute with e'
   >     cd ..
   > }
 
   $ initrepo r1
   $ cd r1
 
 Initial generation of the command files
 
   $ EDITED="$TESTTMP/editedhistory"
   $ hg log --template 'pick {node|short} {rev} {desc}\n' -r 3 >> $EDITED
   $ hg log --template 'pick {node|short} {rev} {desc}\n' -r 4 >> $EDITED
   $ hg log --template 'pick {node|short} {rev} {desc}\n' -r 7 >> $EDITED
   $ hg log --template 'pick {node|short} {rev} {desc}\n' -r 5 >> $EDITED
   $ hg log --template 'pick {node|short} {rev} {desc}\n' -r 6 >> $EDITED
   $ cat $EDITED
   pick 65a9a84f33fd 3 c
   pick 00f1c5383965 4 d
   pick 39522b764e3d 7 does not commute with e
   pick 7b4e2f4b7bcd 5 e
   pick 500cac37a696 6 f
 
 log before edit
   $ hg log --graph
   @  changeset:   7:39522b764e3d
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     does not commute with e
   |
   o  changeset:   6:500cac37a696
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     f
   |
   o  changeset:   5:7b4e2f4b7bcd
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     e
   |
   o  changeset:   4:00f1c5383965
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     d
   |
   o  changeset:   3:65a9a84f33fd
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     c
   |
   o  changeset:   2:da6535b52e45
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     b
   |
   o  changeset:   1:c1f09da44841
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     a
   |
   o  changeset:   0:1715188a53c7
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     Initial commit
   
 
 edit the history
   $ hg histedit 3 --commands $EDITED 2>&1 | fixbundle
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   merging e
   warning: conflicts while merging e! (edit, then use 'hg resolve --mark')
   Fix up the change and run hg histedit --continue
 
 abort the edit
   $ hg histedit --abort 2>&1 | fixbundle
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
 
 second edit set
 
   $ hg log --graph
   @  changeset:   7:39522b764e3d
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     does not commute with e
   |
   o  changeset:   6:500cac37a696
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     f
   |
   o  changeset:   5:7b4e2f4b7bcd
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     e
   |
   o  changeset:   4:00f1c5383965
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     d
   |
   o  changeset:   3:65a9a84f33fd
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     c
   |
   o  changeset:   2:da6535b52e45
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     b
   |
   o  changeset:   1:c1f09da44841
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     a
   |
   o  changeset:   0:1715188a53c7
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     Initial commit
   
 
 edit the history
   $ hg histedit 3 --commands $EDITED 2>&1 | fixbundle
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   merging e
   warning: conflicts while merging e! (edit, then use 'hg resolve --mark')
   Fix up the change and run hg histedit --continue
 
 fix up
   $ echo 'I can haz no commute' > e
   $ hg resolve --mark e
   (no more unresolved files)
+  continue: hg histedit --continue
   $ hg histedit --continue 2>&1 | fixbundle
   merging e
   warning: conflicts while merging e! (edit, then use 'hg resolve --mark')
   Fix up the change and run hg histedit --continue
 
 This failure is caused by 7b4e2f4b7bcd "e" not rebasing the non commutative
 former children.
 
 just continue this time
   $ hg revert -r 'p1()' e
   $ hg resolve --mark e
   (no more unresolved files)
+  continue: hg histedit --continue
   $ hg histedit --continue 2>&1 | fixbundle
   7b4e2f4b7bcd: empty changeset
 
 log after edit
   $ hg log --graph
   @  changeset:   6:7efe1373e4bc
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     f
   |
   o  changeset:   5:e334d87a1e55
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     does not commute with e
   |
   o  changeset:   4:00f1c5383965
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     d
   |
   o  changeset:   3:65a9a84f33fd
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     c
   |
   o  changeset:   2:da6535b52e45
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     b
   |
   o  changeset:   1:c1f09da44841
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     a
   |
   o  changeset:   0:1715188a53c7
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     Initial commit
   
 
 start over
 
   $ cd ..
 
   $ initrepo r2
   $ cd r2
   $ rm $EDITED
   $ hg log --template 'pick {node|short} {rev} {desc}\n' -r 3 >> $EDITED
   $ hg log --template 'pick {node|short} {rev} {desc}\n' -r 4 >> $EDITED
   $ hg log --template 'mess {node|short} {rev} {desc}\n' -r 7 >> $EDITED
   $ hg log --template 'pick {node|short} {rev} {desc}\n' -r 5 >> $EDITED
   $ hg log --template 'pick {node|short} {rev} {desc}\n' -r 6 >> $EDITED
   $ cat $EDITED
   pick 65a9a84f33fd 3 c
   pick 00f1c5383965 4 d
   mess 39522b764e3d 7 does not commute with e
   pick 7b4e2f4b7bcd 5 e
   pick 500cac37a696 6 f
 
 edit the history, this time with a fold action
   $ hg histedit 3 --commands $EDITED 2>&1 | fixbundle
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   merging e
   warning: conflicts while merging e! (edit, then use 'hg resolve --mark')
   Fix up the change and run hg histedit --continue
 
   $ echo 'I can haz no commute' > e
   $ hg resolve --mark e
   (no more unresolved files)
+  continue: hg histedit --continue
   $ hg histedit --continue 2>&1 | fixbundle
   merging e
   warning: conflicts while merging e! (edit, then use 'hg resolve --mark')
   Fix up the change and run hg histedit --continue
 second edit also fails, but just continue
   $ hg revert -r 'p1()' e
   $ hg resolve --mark e
   (no more unresolved files)
+  continue: hg histedit --continue
   $ hg histedit --continue 2>&1 | fixbundle
   7b4e2f4b7bcd: empty changeset
 
 post message fix
   $ hg log --graph
   @  changeset:   6:7efe1373e4bc
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     f
   |
   o  changeset:   5:e334d87a1e55
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     does not commute with e
   |
   o  changeset:   4:00f1c5383965
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     d
   |
   o  changeset:   3:65a9a84f33fd
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     c
   |
   o  changeset:   2:da6535b52e45
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     b
   |
   o  changeset:   1:c1f09da44841
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     a
   |
   o  changeset:   0:1715188a53c7
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     Initial commit
   
 
   $ cd ..