debug: allow specifying a manifest node rather than a revision

contrib/perf.py

@@ -1,1827 +1,1833
 # perf.py - performance test routines
 '''helper extension to measure performance'''
 
 # "historical portability" policy of perf.py:
 #
 # We have to do:
 # - make perf.py "loadable" with as wide Mercurial version as possible
 #   This doesn't mean that perf commands work correctly with that Mercurial.
 #   BTW, perf.py itself has been available since 1.1 (or eb240755386d).
 # - make historical perf command work correctly with as wide Mercurial
 #   version as possible
 #
 # We have to do, if possible with reasonable cost:
 # - make recent perf command for historical feature work correctly
 #   with early Mercurial
 #
 # We don't have to do:
 # - make perf command for recent feature work correctly with early
 #   Mercurial
 
 from __future__ import absolute_import
 import functools
 import gc
 import os
 import random
 import struct
 import sys
 import threading
 import time
 from mercurial import (
     changegroup,
     cmdutil,
     commands,
     copies,
     error,
     extensions,
     mdiff,
     merge,
     revlog,
     util,
 )
 
 # for "historical portability":
 # try to import modules separately (in dict order), and ignore
 # failure, because these aren't available with early Mercurial
 try:
     from mercurial import branchmap # since 2.5 (or bcee63733aad)
 except ImportError:
     pass
 try:
     from mercurial import obsolete # since 2.3 (or ad0d6c2b3279)
 except ImportError:
     pass
 try:
     from mercurial import registrar # since 3.7 (or 37d50250b696)
     dir(registrar) # forcibly load it
 except ImportError:
     registrar = None
 try:
     from mercurial import repoview # since 2.5 (or 3a6ddacb7198)
 except ImportError:
     pass
 try:
     from mercurial import scmutil # since 1.9 (or 8b252e826c68)
 except ImportError:
     pass
 try:
     from mercurial import pycompat
     getargspec = pycompat.getargspec  # added to module after 4.5
 except (ImportError, AttributeError):
     import inspect
     getargspec = inspect.getargspec
 
 try:
     # 4.7+
     queue = pycompat.queue.Queue
 except (AttributeError, ImportError):
     # <4.7.
     try:
         queue = pycompat.queue
     except (AttributeError, ImportError):
         queue = util.queue
 
 try:
     from mercurial import logcmdutil
     makelogtemplater = logcmdutil.maketemplater
 except (AttributeError, ImportError):
     try:
         makelogtemplater = cmdutil.makelogtemplater
     except (AttributeError, ImportError):
         makelogtemplater = None
 
 # for "historical portability":
 # define util.safehasattr forcibly, because util.safehasattr has been
 # available since 1.9.3 (or 94b200a11cf7)
 _undefined = object()
 def safehasattr(thing, attr):
     return getattr(thing, attr, _undefined) is not _undefined
 setattr(util, 'safehasattr', safehasattr)
 
 # for "historical portability":
 # define util.timer forcibly, because util.timer has been available
 # since ae5d60bb70c9
 if safehasattr(time, 'perf_counter'):
     util.timer = time.perf_counter
 elif os.name == 'nt':
     util.timer = time.clock
 else:
     util.timer = time.time
 
 # for "historical portability":
 # use locally defined empty option list, if formatteropts isn't
 # available, because commands.formatteropts has been available since
 # 3.2 (or 7a7eed5176a4), even though formatting itself has been
 # available since 2.2 (or ae5f92e154d3)
 formatteropts = getattr(cmdutil, "formatteropts",
                         getattr(commands, "formatteropts", []))
 
 # for "historical portability":
 # use locally defined option list, if debugrevlogopts isn't available,
 # because commands.debugrevlogopts has been available since 3.7 (or
 # 5606f7d0d063), even though cmdutil.openrevlog() has been available
 # since 1.9 (or a79fea6b3e77).
 revlogopts = getattr(cmdutil, "debugrevlogopts",
                      getattr(commands, "debugrevlogopts", [
         ('c', 'changelog', False, ('open changelog')),
         ('m', 'manifest', False, ('open manifest')),
         ('', 'dir', False, ('open directory manifest')),
         ]))
 
 cmdtable = {}
 
 # for "historical portability":
 # define parsealiases locally, because cmdutil.parsealiases has been
 # available since 1.5 (or 6252852b4332)
 def parsealiases(cmd):
     return cmd.lstrip("^").split("|")
 
 if safehasattr(registrar, 'command'):
     command = registrar.command(cmdtable)
 elif safehasattr(cmdutil, 'command'):
     command = cmdutil.command(cmdtable)
     if 'norepo' not in getargspec(command).args:
         # for "historical portability":
         # wrap original cmdutil.command, because "norepo" option has
         # been available since 3.1 (or 75a96326cecb)
         _command = command
         def command(name, options=(), synopsis=None, norepo=False):
             if norepo:
                 commands.norepo += ' %s' % ' '.join(parsealiases(name))
             return _command(name, list(options), synopsis)
 else:
     # for "historical portability":
     # define "@command" annotation locally, because cmdutil.command
     # has been available since 1.9 (or 2daa5179e73f)
     def command(name, options=(), synopsis=None, norepo=False):
         def decorator(func):
             if synopsis:
                 cmdtable[name] = func, list(options), synopsis
             else:
                 cmdtable[name] = func, list(options)
             if norepo:
                 commands.norepo += ' %s' % ' '.join(parsealiases(name))
             return func
         return decorator
 
 try:
     import mercurial.registrar
     import mercurial.configitems
     configtable = {}
     configitem = mercurial.registrar.configitem(configtable)
     configitem('perf', 'presleep',
         default=mercurial.configitems.dynamicdefault,
     )
     configitem('perf', 'stub',
         default=mercurial.configitems.dynamicdefault,
     )
     configitem('perf', 'parentscount',
         default=mercurial.configitems.dynamicdefault,
     )
     configitem('perf', 'all-timing',
         default=mercurial.configitems.dynamicdefault,
     )
 except (ImportError, AttributeError):
     pass
 
 def getlen(ui):
     if ui.configbool("perf", "stub", False):
         return lambda x: 1
     return len
 
 def gettimer(ui, opts=None):
     """return a timer function and formatter: (timer, formatter)
 
     This function exists to gather the creation of formatter in a single
     place instead of duplicating it in all performance commands."""
 
     # enforce an idle period before execution to counteract power management
     # experimental config: perf.presleep
     time.sleep(getint(ui, "perf", "presleep", 1))
 
     if opts is None:
         opts = {}
     # redirect all to stderr unless buffer api is in use
     if not ui._buffers:
         ui = ui.copy()
         uifout = safeattrsetter(ui, 'fout', ignoremissing=True)
         if uifout:
             # for "historical portability":
             # ui.fout/ferr have been available since 1.9 (or 4e1ccd4c2b6d)
             uifout.set(ui.ferr)
 
     # get a formatter
     uiformatter = getattr(ui, 'formatter', None)
     if uiformatter:
         fm = uiformatter('perf', opts)
     else:
         # for "historical portability":
         # define formatter locally, because ui.formatter has been
         # available since 2.2 (or ae5f92e154d3)
         from mercurial import node
         class defaultformatter(object):
             """Minimized composition of baseformatter and plainformatter
             """
             def __init__(self, ui, topic, opts):
                 self._ui = ui
                 if ui.debugflag:
                     self.hexfunc = node.hex
                 else:
                     self.hexfunc = node.short
             def __nonzero__(self):
                 return False
             __bool__ = __nonzero__
             def startitem(self):
                 pass
             def data(self, **data):
                 pass
             def write(self, fields, deftext, *fielddata, **opts):
                 self._ui.write(deftext % fielddata, **opts)
             def condwrite(self, cond, fields, deftext, *fielddata, **opts):
                 if cond:
                     self._ui.write(deftext % fielddata, **opts)
             def plain(self, text, **opts):
                 self._ui.write(text, **opts)
             def end(self):
                 pass
         fm = defaultformatter(ui, 'perf', opts)
 
     # stub function, runs code only once instead of in a loop
     # experimental config: perf.stub
     if ui.configbool("perf", "stub", False):
         return functools.partial(stub_timer, fm), fm
 
     # experimental config: perf.all-timing
     displayall = ui.configbool("perf", "all-timing", False)
     return functools.partial(_timer, fm, displayall=displayall), fm
 
 def stub_timer(fm, func, title=None):
     func()
 
 def _timer(fm, func, title=None, displayall=False):
     gc.collect()
     results = []
     begin = util.timer()
     count = 0
     while True:
         ostart = os.times()
         cstart = util.timer()
         r = func()
         cstop = util.timer()
         ostop = os.times()
         count += 1
         a, b = ostart, ostop
         results.append((cstop - cstart, b[0] - a[0], b[1]-a[1]))
         if cstop - begin > 3 and count >= 100:
             break
         if cstop - begin > 10 and count >= 3:
             break
 
     fm.startitem()
 
     if title:
         fm.write('title', '! %s\n', title)
     if r:
         fm.write('result', '! result: %s\n', r)
     def display(role, entry):
         prefix = ''
         if role != 'best':
             prefix = '%s.' % role
         fm.plain('!')
         fm.write(prefix + 'wall', ' wall %f', entry[0])
         fm.write(prefix + 'comb', ' comb %f', entry[1] + entry[2])
         fm.write(prefix + 'user', ' user %f', entry[1])
         fm.write(prefix + 'sys',  ' sys %f', entry[2])
         fm.write(prefix + 'count',  ' (%s of %d)', role, count)
         fm.plain('\n')
     results.sort()
     min_val = results[0]
     display('best', min_val)
     if displayall:
         max_val = results[-1]
         display('max', max_val)
         avg = tuple([sum(x) / count for x in zip(*results)])
         display('avg', avg)
         median = results[len(results) // 2]
         display('median', median)
 
 # utilities for historical portability
 
 def getint(ui, section, name, default):
     # for "historical portability":
     # ui.configint has been available since 1.9 (or fa2b596db182)
     v = ui.config(section, name, None)
     if v is None:
         return default
     try:
         return int(v)
     except ValueError:
         raise error.ConfigError(("%s.%s is not an integer ('%s')")
                                 % (section, name, v))
 
 def safeattrsetter(obj, name, ignoremissing=False):
     """Ensure that 'obj' has 'name' attribute before subsequent setattr
 
     This function is aborted, if 'obj' doesn't have 'name' attribute
     at runtime. This avoids overlooking removal of an attribute, which
     breaks assumption of performance measurement, in the future.
 
     This function returns the object to (1) assign a new value, and
     (2) restore an original value to the attribute.
 
     If 'ignoremissing' is true, missing 'name' attribute doesn't cause
     abortion, and this function returns None. This is useful to
     examine an attribute, which isn't ensured in all Mercurial
     versions.
     """
     if not util.safehasattr(obj, name):
         if ignoremissing:
             return None
         raise error.Abort(("missing attribute %s of %s might break assumption"
                            " of performance measurement") % (name, obj))
 
     origvalue = getattr(obj, name)
     class attrutil(object):
         def set(self, newvalue):
             setattr(obj, name, newvalue)
         def restore(self):
             setattr(obj, name, origvalue)
 
     return attrutil()
 
 # utilities to examine each internal API changes
 
 def getbranchmapsubsettable():
     # for "historical portability":
     # subsettable is defined in:
     # - branchmap since 2.9 (or 175c6fd8cacc)
     # - repoview since 2.5 (or 59a9f18d4587)
     for mod in (branchmap, repoview):
         subsettable = getattr(mod, 'subsettable', None)
         if subsettable:
             return subsettable
 
     # bisecting in bcee63733aad::59a9f18d4587 can reach here (both
     # branchmap and repoview modules exist, but subsettable attribute
     # doesn't)
     raise error.Abort(("perfbranchmap not available with this Mercurial"),
                       hint="use 2.5 or later")
 
 def getsvfs(repo):
     """Return appropriate object to access files under .hg/store
     """
     # for "historical portability":
     # repo.svfs has been available since 2.3 (or 7034365089bf)
     svfs = getattr(repo, 'svfs', None)
     if svfs:
         return svfs
     else:
         return getattr(repo, 'sopener')
 
 def getvfs(repo):
     """Return appropriate object to access files under .hg
     """
     # for "historical portability":
     # repo.vfs has been available since 2.3 (or 7034365089bf)
     vfs = getattr(repo, 'vfs', None)
     if vfs:
         return vfs
     else:
         return getattr(repo, 'opener')
 
 def repocleartagscachefunc(repo):
     """Return the function to clear tags cache according to repo internal API
     """
     if util.safehasattr(repo, '_tagscache'): # since 2.0 (or 9dca7653b525)
         # in this case, setattr(repo, '_tagscache', None) or so isn't
         # correct way to clear tags cache, because existing code paths
         # expect _tagscache to be a structured object.
         def clearcache():
             # _tagscache has been filteredpropertycache since 2.5 (or
             # 98c867ac1330), and delattr() can't work in such case
             if '_tagscache' in vars(repo):
                 del repo.__dict__['_tagscache']
         return clearcache
 
     repotags = safeattrsetter(repo, '_tags', ignoremissing=True)
     if repotags: # since 1.4 (or 5614a628d173)
         return lambda : repotags.set(None)
 
     repotagscache = safeattrsetter(repo, 'tagscache', ignoremissing=True)
     if repotagscache: # since 0.6 (or d7df759d0e97)
         return lambda : repotagscache.set(None)
 
     # Mercurial earlier than 0.6 (or d7df759d0e97) logically reaches
     # this point, but it isn't so problematic, because:
     # - repo.tags of such Mercurial isn't "callable", and repo.tags()
     #   in perftags() causes failure soon
     # - perf.py itself has been available since 1.1 (or eb240755386d)
     raise error.Abort(("tags API of this hg command is unknown"))
 
 # utilities to clear cache
 
 def clearfilecache(repo, attrname):
     unfi = repo.unfiltered()
     if attrname in vars(unfi):
         delattr(unfi, attrname)
     unfi._filecache.pop(attrname, None)
 
 # perf commands
 
 @command('perfwalk', formatteropts)
 def perfwalk(ui, repo, *pats, **opts):
     timer, fm = gettimer(ui, opts)
     m = scmutil.match(repo[None], pats, {})
     timer(lambda: len(list(repo.dirstate.walk(m, subrepos=[], unknown=True,
                                               ignored=False))))
     fm.end()
 
 @command('perfannotate', formatteropts)
 def perfannotate(ui, repo, f, **opts):
     timer, fm = gettimer(ui, opts)
     fc = repo['.'][f]
     timer(lambda: len(fc.annotate(True)))
     fm.end()
 
 @command('perfstatus',
          [('u', 'unknown', False,
            'ask status to look for unknown files')] + formatteropts)
 def perfstatus(ui, repo, **opts):
     #m = match.always(repo.root, repo.getcwd())
     #timer(lambda: sum(map(len, repo.dirstate.status(m, [], False, False,
     #                                                False))))
     timer, fm = gettimer(ui, opts)
     timer(lambda: sum(map(len, repo.status(unknown=opts['unknown']))))
     fm.end()
 
 @command('perfaddremove', formatteropts)
 def perfaddremove(ui, repo, **opts):
     timer, fm = gettimer(ui, opts)
     try:
         oldquiet = repo.ui.quiet
         repo.ui.quiet = True
         matcher = scmutil.match(repo[None])
         opts['dry_run'] = True
         timer(lambda: scmutil.addremove(repo, matcher, "", opts))
     finally:
         repo.ui.quiet = oldquiet
         fm.end()
 
 def clearcaches(cl):
     # behave somewhat consistently across internal API changes
     if util.safehasattr(cl, 'clearcaches'):
         cl.clearcaches()
     elif util.safehasattr(cl, '_nodecache'):
         from mercurial.node import nullid, nullrev
         cl._nodecache = {nullid: nullrev}
         cl._nodepos = None
 
 @command('perfheads', formatteropts)
 def perfheads(ui, repo, **opts):
     timer, fm = gettimer(ui, opts)
     cl = repo.changelog
     def d():
         len(cl.headrevs())
         clearcaches(cl)
     timer(d)
     fm.end()
 
 @command('perftags', formatteropts)
 def perftags(ui, repo, **opts):
     import mercurial.changelog
     import mercurial.manifest
     timer, fm = gettimer(ui, opts)
     svfs = getsvfs(repo)
     repocleartagscache = repocleartagscachefunc(repo)
     def t():
         repo.changelog = mercurial.changelog.changelog(svfs)
         repo.manifestlog = mercurial.manifest.manifestlog(svfs, repo)
         repocleartagscache()
         return len(repo.tags())
     timer(t)
     fm.end()
 
 @command('perfancestors', formatteropts)
 def perfancestors(ui, repo, **opts):
     timer, fm = gettimer(ui, opts)
     heads = repo.changelog.headrevs()
     def d():
         for a in repo.changelog.ancestors(heads):
             pass
     timer(d)
     fm.end()
 
 @command('perfancestorset', formatteropts)
 def perfancestorset(ui, repo, revset, **opts):
     timer, fm = gettimer(ui, opts)
     revs = repo.revs(revset)
     heads = repo.changelog.headrevs()
     def d():
         s = repo.changelog.ancestors(heads)
         for rev in revs:
             rev in s
     timer(d)
     fm.end()
 
 @command('perfbookmarks', formatteropts)
 def perfbookmarks(ui, repo, **opts):
     """benchmark parsing bookmarks from disk to memory"""
     timer, fm = gettimer(ui, opts)
     def d():
         clearfilecache(repo, '_bookmarks')
         repo._bookmarks
     timer(d)
     fm.end()
 
 @command('perfbundleread', formatteropts, 'BUNDLE')
 def perfbundleread(ui, repo, bundlepath, **opts):
     """Benchmark reading of bundle files.
 
     This command is meant to isolate the I/O part of bundle reading as
     much as possible.
     """
     from mercurial import (
         bundle2,
         exchange,
         streamclone,
     )
 
     def makebench(fn):
         def run():
             with open(bundlepath, 'rb') as fh:
                 bundle = exchange.readbundle(ui, fh, bundlepath)
                 fn(bundle)
 
         return run
 
     def makereadnbytes(size):
         def run():
             with open(bundlepath, 'rb') as fh:
                 bundle = exchange.readbundle(ui, fh, bundlepath)
                 while bundle.read(size):
                     pass
 
         return run
 
     def makestdioread(size):
         def run():
             with open(bundlepath, 'rb') as fh:
                 while fh.read(size):
                     pass
 
         return run
 
     # bundle1
 
     def deltaiter(bundle):
         for delta in bundle.deltaiter():
             pass
 
     def iterchunks(bundle):
         for chunk in bundle.getchunks():
             pass
 
     # bundle2
 
     def forwardchunks(bundle):
         for chunk in bundle._forwardchunks():
             pass
 
     def iterparts(bundle):
         for part in bundle.iterparts():
             pass
 
     def iterpartsseekable(bundle):
         for part in bundle.iterparts(seekable=True):
             pass
 
     def seek(bundle):
         for part in bundle.iterparts(seekable=True):
             part.seek(0, os.SEEK_END)
 
     def makepartreadnbytes(size):
         def run():
             with open(bundlepath, 'rb') as fh:
                 bundle = exchange.readbundle(ui, fh, bundlepath)
                 for part in bundle.iterparts():
                     while part.read(size):
                         pass
 
         return run
 
     benches = [
         (makestdioread(8192), 'read(8k)'),
         (makestdioread(16384), 'read(16k)'),
         (makestdioread(32768), 'read(32k)'),
         (makestdioread(131072), 'read(128k)'),
     ]
 
     with open(bundlepath, 'rb') as fh:
         bundle = exchange.readbundle(ui, fh, bundlepath)
 
         if isinstance(bundle, changegroup.cg1unpacker):
             benches.extend([
                 (makebench(deltaiter), 'cg1 deltaiter()'),
                 (makebench(iterchunks), 'cg1 getchunks()'),
                 (makereadnbytes(8192), 'cg1 read(8k)'),
                 (makereadnbytes(16384), 'cg1 read(16k)'),
                 (makereadnbytes(32768), 'cg1 read(32k)'),
                 (makereadnbytes(131072), 'cg1 read(128k)'),
             ])
         elif isinstance(bundle, bundle2.unbundle20):
             benches.extend([
                 (makebench(forwardchunks), 'bundle2 forwardchunks()'),
                 (makebench(iterparts), 'bundle2 iterparts()'),
                 (makebench(iterpartsseekable), 'bundle2 iterparts() seekable'),
                 (makebench(seek), 'bundle2 part seek()'),
                 (makepartreadnbytes(8192), 'bundle2 part read(8k)'),
                 (makepartreadnbytes(16384), 'bundle2 part read(16k)'),
                 (makepartreadnbytes(32768), 'bundle2 part read(32k)'),
                 (makepartreadnbytes(131072), 'bundle2 part read(128k)'),
             ])
         elif isinstance(bundle, streamclone.streamcloneapplier):
             raise error.Abort('stream clone bundles not supported')
         else:
             raise error.Abort('unhandled bundle type: %s' % type(bundle))
 
     for fn, title in benches:
         timer, fm = gettimer(ui, opts)
         timer(fn, title=title)
         fm.end()
 
 @command('perfchangegroupchangelog', formatteropts +
          [('', 'version', '02', 'changegroup version'),
           ('r', 'rev', '', 'revisions to add to changegroup')])
 def perfchangegroupchangelog(ui, repo, version='02', rev=None, **opts):
     """Benchmark producing a changelog group for a changegroup.
 
     This measures the time spent processing the changelog during a
     bundle operation. This occurs during `hg bundle` and on a server
     processing a `getbundle` wire protocol request (handles clones
     and pull requests).
 
     By default, all revisions are added to the changegroup.
     """
     cl = repo.changelog
     revs = [cl.lookup(r) for r in repo.revs(rev or 'all()')]
     bundler = changegroup.getbundler(version, repo)
 
     def lookup(node):
         # The real bundler reads the revision in order to access the
         # manifest node and files list. Do that here.
         cl.read(node)
         return node
 
     def d():
         for chunk in bundler.group(revs, cl, lookup):
             pass
 
     timer, fm = gettimer(ui, opts)
     timer(d)
     fm.end()
 
 @command('perfdirs', formatteropts)
 def perfdirs(ui, repo, **opts):
     timer, fm = gettimer(ui, opts)
     dirstate = repo.dirstate
     'a' in dirstate
     def d():
         dirstate.hasdir('a')
         del dirstate._map._dirs
     timer(d)
     fm.end()
 
 @command('perfdirstate', formatteropts)
 def perfdirstate(ui, repo, **opts):
     timer, fm = gettimer(ui, opts)
     "a" in repo.dirstate
     def d():
         repo.dirstate.invalidate()
         "a" in repo.dirstate
     timer(d)
     fm.end()
 
 @command('perfdirstatedirs', formatteropts)
 def perfdirstatedirs(ui, repo, **opts):
     timer, fm = gettimer(ui, opts)
     "a" in repo.dirstate
     def d():
         repo.dirstate.hasdir("a")
         del repo.dirstate._map._dirs
     timer(d)
     fm.end()
 
 @command('perfdirstatefoldmap', formatteropts)
 def perfdirstatefoldmap(ui, repo, **opts):
     timer, fm = gettimer(ui, opts)
     dirstate = repo.dirstate
     'a' in dirstate
     def d():
         dirstate._map.filefoldmap.get('a')
         del dirstate._map.filefoldmap
     timer(d)
     fm.end()
 
 @command('perfdirfoldmap', formatteropts)
 def perfdirfoldmap(ui, repo, **opts):
     timer, fm = gettimer(ui, opts)
     dirstate = repo.dirstate
     'a' in dirstate
     def d():
         dirstate._map.dirfoldmap.get('a')
         del dirstate._map.dirfoldmap
         del dirstate._map._dirs
     timer(d)
     fm.end()
 
 @command('perfdirstatewrite', formatteropts)
 def perfdirstatewrite(ui, repo, **opts):
     timer, fm = gettimer(ui, opts)
     ds = repo.dirstate
     "a" in ds
     def d():
         ds._dirty = True
         ds.write(repo.currenttransaction())
     timer(d)
     fm.end()
 
 @command('perfmergecalculate',
          [('r', 'rev', '.', 'rev to merge against')] + formatteropts)
 def perfmergecalculate(ui, repo, rev, **opts):
     timer, fm = gettimer(ui, opts)
     wctx = repo[None]
     rctx = scmutil.revsingle(repo, rev, rev)
     ancestor = wctx.ancestor(rctx)
     # we don't want working dir files to be stat'd in the benchmark, so prime
     # that cache
     wctx.dirty()
     def d():
         # acceptremote is True because we don't want prompts in the middle of
         # our benchmark
         merge.calculateupdates(repo, wctx, rctx, [ancestor], False, False,
                                acceptremote=True, followcopies=True)
     timer(d)
     fm.end()
 
 @command('perfpathcopies', [], "REV REV")
 def perfpathcopies(ui, repo, rev1, rev2, **opts):
     timer, fm = gettimer(ui, opts)
     ctx1 = scmutil.revsingle(repo, rev1, rev1)
     ctx2 = scmutil.revsingle(repo, rev2, rev2)
     def d():
         copies.pathcopies(ctx1, ctx2)
     timer(d)
     fm.end()
 
 @command('perfphases',
          [('', 'full', False, 'include file reading time too'),
          ], "")
 def perfphases(ui, repo, **opts):
     """benchmark phasesets computation"""
     timer, fm = gettimer(ui, opts)
     _phases = repo._phasecache
     full = opts.get('full')
     def d():
         phases = _phases
         if full:
             clearfilecache(repo, '_phasecache')
             phases = repo._phasecache
         phases.invalidate()
         phases.loadphaserevs(repo)
     timer(d)
     fm.end()
 
-@command('perfmanifest', [], 'REV')
-def perfmanifest(ui, repo, rev, **opts):
+@command('perfmanifest',[
+            ('m', 'manifest-rev', False, 'Look up a manifest node revision'),
+            ('', 'clear-disk', False, 'clear on-disk caches too'),
+         ], 'REV|NODE')
+def perfmanifest(ui, repo, rev, manifest_rev=False, clear_disk=False, **opts):
     """benchmark the time to read a manifest from disk and return a usable
     dict-like object
 
     Manifest caches are cleared before retrieval."""
     timer, fm = gettimer(ui, opts)
+    if not manifest_rev:
     ctx = scmutil.revsingle(repo, rev, rev)
     t = ctx.manifestnode()
+    else:
+        t = repo.manifestlog._revlog.lookup(rev)
     def d():
         repo.manifestlog.clearcaches()
         repo.manifestlog[t].read()
     timer(d)
     fm.end()
 
 @command('perfchangeset', formatteropts)
 def perfchangeset(ui, repo, rev, **opts):
     timer, fm = gettimer(ui, opts)
     n = scmutil.revsingle(repo, rev).node()
     def d():
         repo.changelog.read(n)
         #repo.changelog._cache = None
     timer(d)
     fm.end()
 
 @command('perfindex', formatteropts)
 def perfindex(ui, repo, **opts):
     import mercurial.revlog
     timer, fm = gettimer(ui, opts)
     mercurial.revlog._prereadsize = 2**24 # disable lazy parser in old hg
     n = repo["tip"].node()
     svfs = getsvfs(repo)
     def d():
         cl = mercurial.revlog.revlog(svfs, "00changelog.i")
         cl.rev(n)
     timer(d)
     fm.end()
 
 @command('perfstartup', formatteropts)
 def perfstartup(ui, repo, **opts):
     timer, fm = gettimer(ui, opts)
     cmd = sys.argv[0]
     def d():
         if os.name != 'nt':
             os.system("HGRCPATH= %s version -q > /dev/null" % cmd)
         else:
             os.environ['HGRCPATH'] = ' '
             os.system("%s version -q > NUL" % cmd)
     timer(d)
     fm.end()
 
 @command('perfparents', formatteropts)
 def perfparents(ui, repo, **opts):
     timer, fm = gettimer(ui, opts)
     # control the number of commits perfparents iterates over
     # experimental config: perf.parentscount
     count = getint(ui, "perf", "parentscount", 1000)
     if len(repo.changelog) < count:
         raise error.Abort("repo needs %d commits for this test" % count)
     repo = repo.unfiltered()
     nl = [repo.changelog.node(i) for i in xrange(count)]
     def d():
         for n in nl:
             repo.changelog.parents(n)
     timer(d)
     fm.end()
 
 @command('perfctxfiles', formatteropts)
 def perfctxfiles(ui, repo, x, **opts):
     x = int(x)
     timer, fm = gettimer(ui, opts)
     def d():
         len(repo[x].files())
     timer(d)
     fm.end()
 
 @command('perfrawfiles', formatteropts)
 def perfrawfiles(ui, repo, x, **opts):
     x = int(x)
     timer, fm = gettimer(ui, opts)
     cl = repo.changelog
     def d():
         len(cl.read(x)[3])
     timer(d)
     fm.end()
 
 @command('perflookup', formatteropts)
 def perflookup(ui, repo, rev, **opts):
     timer, fm = gettimer(ui, opts)
     timer(lambda: len(repo.lookup(rev)))
     fm.end()
 
 @command('perfrevrange', formatteropts)
 def perfrevrange(ui, repo, *specs, **opts):
     timer, fm = gettimer(ui, opts)
     revrange = scmutil.revrange
     timer(lambda: len(revrange(repo, specs)))
     fm.end()
 
 @command('perfnodelookup', formatteropts)
 def perfnodelookup(ui, repo, rev, **opts):
     timer, fm = gettimer(ui, opts)
     import mercurial.revlog
     mercurial.revlog._prereadsize = 2**24 # disable lazy parser in old hg
     n = scmutil.revsingle(repo, rev).node()
     cl = mercurial.revlog.revlog(getsvfs(repo), "00changelog.i")
     def d():
         cl.rev(n)
         clearcaches(cl)
     timer(d)
     fm.end()
 
 @command('perflog',
          [('', 'rename', False, 'ask log to follow renames')] + formatteropts)
 def perflog(ui, repo, rev=None, **opts):
     if rev is None:
         rev=[]
     timer, fm = gettimer(ui, opts)
     ui.pushbuffer()
     timer(lambda: commands.log(ui, repo, rev=rev, date='', user='',
                                copies=opts.get('rename')))
     ui.popbuffer()
     fm.end()
 
 @command('perfmoonwalk', formatteropts)
 def perfmoonwalk(ui, repo, **opts):
     """benchmark walking the changelog backwards
 
     This also loads the changelog data for each revision in the changelog.
     """
     timer, fm = gettimer(ui, opts)
     def moonwalk():
         for i in repo.changelog.revs(start=(len(repo) - 1), stop=-1):
             ctx = repo[i]
             ctx.branch() # read changelog data (in addition to the index)
     timer(moonwalk)
     fm.end()
 
 @command('perftemplating',
          [('r', 'rev', [], 'revisions to run the template on'),
          ] + formatteropts)
 def perftemplating(ui, repo, testedtemplate=None, **opts):
     """test the rendering time of a given template"""
     if makelogtemplater is None:
         raise error.Abort(("perftemplating not available with this Mercurial"),
                           hint="use 4.3 or later")
 
     nullui = ui.copy()
     nullui.fout = open(os.devnull, 'wb')
     nullui.disablepager()
     revs = opts.get('rev')
     if not revs:
         revs = ['all()']
     revs = list(scmutil.revrange(repo, revs))
 
     defaulttemplate = ('{date|shortdate} [{rev}:{node|short}]'
                        ' {author|person}: {desc|firstline}\n')
     if testedtemplate is None:
         testedtemplate = defaulttemplate
     displayer = makelogtemplater(nullui, repo, testedtemplate)
     def format():
         for r in revs:
             ctx = repo[r]
             displayer.show(ctx)
             displayer.flush(ctx)
 
     timer, fm = gettimer(ui, opts)
     timer(format)
     fm.end()
 
 @command('perfcca', formatteropts)
 def perfcca(ui, repo, **opts):
     timer, fm = gettimer(ui, opts)
     timer(lambda: scmutil.casecollisionauditor(ui, False, repo.dirstate))
     fm.end()
 
 @command('perffncacheload', formatteropts)
 def perffncacheload(ui, repo, **opts):
     timer, fm = gettimer(ui, opts)
     s = repo.store
     def d():
         s.fncache._load()
     timer(d)
     fm.end()
 
 @command('perffncachewrite', formatteropts)
 def perffncachewrite(ui, repo, **opts):
     timer, fm = gettimer(ui, opts)
     s = repo.store
     lock = repo.lock()
     s.fncache._load()
     tr = repo.transaction('perffncachewrite')
     tr.addbackup('fncache')
     def d():
         s.fncache._dirty = True
         s.fncache.write(tr)
     timer(d)
     tr.close()
     lock.release()
     fm.end()
 
 @command('perffncacheencode', formatteropts)
 def perffncacheencode(ui, repo, **opts):
     timer, fm = gettimer(ui, opts)
     s = repo.store
     s.fncache._load()
     def d():
         for p in s.fncache.entries:
             s.encode(p)
     timer(d)
     fm.end()
 
 def _bdiffworker(q, blocks, xdiff, ready, done):
     while not done.is_set():
         pair = q.get()
         while pair is not None:
             if xdiff:
                 mdiff.bdiff.xdiffblocks(*pair)
             elif blocks:
                 mdiff.bdiff.blocks(*pair)
             else:
                 mdiff.textdiff(*pair)
             q.task_done()
             pair = q.get()
         q.task_done() # for the None one
         with ready:
             ready.wait()
 
 @command('perfbdiff', revlogopts + formatteropts + [
     ('', 'count', 1, 'number of revisions to test (when using --startrev)'),
     ('', 'alldata', False, 'test bdiffs for all associated revisions'),
     ('', 'threads', 0, 'number of thread to use (disable with 0)'),
     ('', 'blocks', False, 'test computing diffs into blocks'),
     ('', 'xdiff', False, 'use xdiff algorithm'),
     ],
 
     '-c|-m|FILE REV')
 def perfbdiff(ui, repo, file_, rev=None, count=None, threads=0, **opts):
     """benchmark a bdiff between revisions
 
     By default, benchmark a bdiff between its delta parent and itself.
 
     With ``--count``, benchmark bdiffs between delta parents and self for N
     revisions starting at the specified revision.
 
     With ``--alldata``, assume the requested revision is a changeset and
     measure bdiffs for all changes related to that changeset (manifest
     and filelogs).
     """
     opts = pycompat.byteskwargs(opts)
 
     if opts['xdiff'] and not opts['blocks']:
         raise error.CommandError('perfbdiff', '--xdiff requires --blocks')
 
     if opts['alldata']:
         opts['changelog'] = True
 
     if opts.get('changelog') or opts.get('manifest'):
         file_, rev = None, file_
     elif rev is None:
         raise error.CommandError('perfbdiff', 'invalid arguments')
 
     blocks = opts['blocks']
     xdiff = opts['xdiff']
     textpairs = []
 
     r = cmdutil.openrevlog(repo, 'perfbdiff', file_, opts)
 
     startrev = r.rev(r.lookup(rev))
     for rev in range(startrev, min(startrev + count, len(r) - 1)):
         if opts['alldata']:
             # Load revisions associated with changeset.
             ctx = repo[rev]
             mtext = repo.manifestlog._revlog.revision(ctx.manifestnode())
             for pctx in ctx.parents():
                 pman = repo.manifestlog._revlog.revision(pctx.manifestnode())
                 textpairs.append((pman, mtext))
 
             # Load filelog revisions by iterating manifest delta.
             man = ctx.manifest()
             pman = ctx.p1().manifest()
             for filename, change in pman.diff(man).items():
                 fctx = repo.file(filename)
                 f1 = fctx.revision(change[0][0] or -1)
                 f2 = fctx.revision(change[1][0] or -1)
                 textpairs.append((f1, f2))
         else:
             dp = r.deltaparent(rev)
             textpairs.append((r.revision(dp), r.revision(rev)))
 
     withthreads = threads > 0
     if not withthreads:
         def d():
             for pair in textpairs:
                 if xdiff:
                     mdiff.bdiff.xdiffblocks(*pair)
                 elif blocks:
                     mdiff.bdiff.blocks(*pair)
                 else:
                     mdiff.textdiff(*pair)
     else:
         q = queue()
         for i in xrange(threads):
             q.put(None)
         ready = threading.Condition()
         done = threading.Event()
         for i in xrange(threads):
             threading.Thread(target=_bdiffworker,
                              args=(q, blocks, xdiff, ready, done)).start()
         q.join()
         def d():
             for pair in textpairs:
                 q.put(pair)
             for i in xrange(threads):
                 q.put(None)
             with ready:
                 ready.notify_all()
             q.join()
     timer, fm = gettimer(ui, opts)
     timer(d)
     fm.end()
 
     if withthreads:
         done.set()
         for i in xrange(threads):
             q.put(None)
         with ready:
             ready.notify_all()
 
 @command('perfunidiff', revlogopts + formatteropts + [
     ('', 'count', 1, 'number of revisions to test (when using --startrev)'),
     ('', 'alldata', False, 'test unidiffs for all associated revisions'),
     ], '-c|-m|FILE REV')
 def perfunidiff(ui, repo, file_, rev=None, count=None, **opts):
     """benchmark a unified diff between revisions
 
     This doesn't include any copy tracing - it's just a unified diff
     of the texts.
 
     By default, benchmark a diff between its delta parent and itself.
 
     With ``--count``, benchmark diffs between delta parents and self for N
     revisions starting at the specified revision.
 
     With ``--alldata``, assume the requested revision is a changeset and
     measure diffs for all changes related to that changeset (manifest
     and filelogs).
     """
     if opts['alldata']:
         opts['changelog'] = True
 
     if opts.get('changelog') or opts.get('manifest'):
         file_, rev = None, file_
     elif rev is None:
         raise error.CommandError('perfunidiff', 'invalid arguments')
 
     textpairs = []
 
     r = cmdutil.openrevlog(repo, 'perfunidiff', file_, opts)
 
     startrev = r.rev(r.lookup(rev))
     for rev in range(startrev, min(startrev + count, len(r) - 1)):
         if opts['alldata']:
             # Load revisions associated with changeset.
             ctx = repo[rev]
             mtext = repo.manifestlog._revlog.revision(ctx.manifestnode())
             for pctx in ctx.parents():
                 pman = repo.manifestlog._revlog.revision(pctx.manifestnode())
                 textpairs.append((pman, mtext))
 
             # Load filelog revisions by iterating manifest delta.
             man = ctx.manifest()
             pman = ctx.p1().manifest()
             for filename, change in pman.diff(man).items():
                 fctx = repo.file(filename)
                 f1 = fctx.revision(change[0][0] or -1)
                 f2 = fctx.revision(change[1][0] or -1)
                 textpairs.append((f1, f2))
         else:
             dp = r.deltaparent(rev)
             textpairs.append((r.revision(dp), r.revision(rev)))
 
     def d():
         for left, right in textpairs:
             # The date strings don't matter, so we pass empty strings.
             headerlines, hunks = mdiff.unidiff(
                 left, '', right, '', 'left', 'right', binary=False)
             # consume iterators in roughly the way patch.py does
             b'\n'.join(headerlines)
             b''.join(sum((list(hlines) for hrange, hlines in hunks), []))
     timer, fm = gettimer(ui, opts)
     timer(d)
     fm.end()
 
 @command('perfdiffwd', formatteropts)
 def perfdiffwd(ui, repo, **opts):
     """Profile diff of working directory changes"""
     timer, fm = gettimer(ui, opts)
     options = {
         'w': 'ignore_all_space',
         'b': 'ignore_space_change',
         'B': 'ignore_blank_lines',
         }
 
     for diffopt in ('', 'w', 'b', 'B', 'wB'):
         opts = dict((options[c], '1') for c in diffopt)
         def d():
             ui.pushbuffer()
             commands.diff(ui, repo, **opts)
             ui.popbuffer()
         title = 'diffopts: %s' % (diffopt and ('-' + diffopt) or 'none')
         timer(d, title)
     fm.end()
 
 @command('perfrevlogindex', revlogopts + formatteropts,
          '-c|-m|FILE')
 def perfrevlogindex(ui, repo, file_=None, **opts):
     """Benchmark operations against a revlog index.
 
     This tests constructing a revlog instance, reading index data,
     parsing index data, and performing various operations related to
     index data.
     """
 
     rl = cmdutil.openrevlog(repo, 'perfrevlogindex', file_, opts)
 
     opener = getattr(rl, 'opener')  # trick linter
     indexfile = rl.indexfile
     data = opener.read(indexfile)
 
     header = struct.unpack('>I', data[0:4])[0]
     version = header & 0xFFFF
     if version == 1:
         revlogio = revlog.revlogio()
         inline = header & (1 << 16)
     else:
         raise error.Abort(('unsupported revlog version: %d') % version)
 
     rllen = len(rl)
 
     node0 = rl.node(0)
     node25 = rl.node(rllen // 4)
     node50 = rl.node(rllen // 2)
     node75 = rl.node(rllen // 4 * 3)
     node100 = rl.node(rllen - 1)
 
     allrevs = range(rllen)
     allrevsrev = list(reversed(allrevs))
     allnodes = [rl.node(rev) for rev in range(rllen)]
     allnodesrev = list(reversed(allnodes))
 
     def constructor():
         revlog.revlog(opener, indexfile)
 
     def read():
         with opener(indexfile) as fh:
             fh.read()
 
     def parseindex():
         revlogio.parseindex(data, inline)
 
     def getentry(revornode):
         index = revlogio.parseindex(data, inline)[0]
         index[revornode]
 
     def getentries(revs, count=1):
         index = revlogio.parseindex(data, inline)[0]
 
         for i in range(count):
             for rev in revs:
                 index[rev]
 
     def resolvenode(node):
         nodemap = revlogio.parseindex(data, inline)[1]
         # This only works for the C code.
         if nodemap is None:
             return
 
         try:
             nodemap[node]
         except error.RevlogError:
             pass
 
     def resolvenodes(nodes, count=1):
         nodemap = revlogio.parseindex(data, inline)[1]
         if nodemap is None:
             return
 
         for i in range(count):
             for node in nodes:
                 try:
                     nodemap[node]
                 except error.RevlogError:
                     pass
 
     benches = [
         (constructor, 'revlog constructor'),
         (read, 'read'),
         (parseindex, 'create index object'),
         (lambda: getentry(0), 'retrieve index entry for rev 0'),
         (lambda: resolvenode('a' * 20), 'look up missing node'),
         (lambda: resolvenode(node0), 'look up node at rev 0'),
         (lambda: resolvenode(node25), 'look up node at 1/4 len'),
         (lambda: resolvenode(node50), 'look up node at 1/2 len'),
         (lambda: resolvenode(node75), 'look up node at 3/4 len'),
         (lambda: resolvenode(node100), 'look up node at tip'),
         # 2x variation is to measure caching impact.
         (lambda: resolvenodes(allnodes),
          'look up all nodes (forward)'),
         (lambda: resolvenodes(allnodes, 2),
          'look up all nodes 2x (forward)'),
         (lambda: resolvenodes(allnodesrev),
          'look up all nodes (reverse)'),
         (lambda: resolvenodes(allnodesrev, 2),
          'look up all nodes 2x (reverse)'),
         (lambda: getentries(allrevs),
          'retrieve all index entries (forward)'),
         (lambda: getentries(allrevs, 2),
          'retrieve all index entries 2x (forward)'),
         (lambda: getentries(allrevsrev),
          'retrieve all index entries (reverse)'),
         (lambda: getentries(allrevsrev, 2),
          'retrieve all index entries 2x (reverse)'),
     ]
 
     for fn, title in benches:
         timer, fm = gettimer(ui, opts)
         timer(fn, title=title)
         fm.end()
 
 @command('perfrevlogrevisions', revlogopts + formatteropts +
          [('d', 'dist', 100, 'distance between the revisions'),
           ('s', 'startrev', 0, 'revision to start reading at'),
           ('', 'reverse', False, 'read in reverse')],
          '-c|-m|FILE')
 def perfrevlogrevisions(ui, repo, file_=None, startrev=0, reverse=False,
                         **opts):
     """Benchmark reading a series of revisions from a revlog.
 
     By default, we read every ``-d/--dist`` revision from 0 to tip of
     the specified revlog.
 
     The start revision can be defined via ``-s/--startrev``.
     """
     rl = cmdutil.openrevlog(repo, 'perfrevlogrevisions', file_, opts)
     rllen = getlen(ui)(rl)
 
     def d():
         rl.clearcaches()
 
         beginrev = startrev
         endrev = rllen
         dist = opts['dist']
 
         if reverse:
             beginrev, endrev = endrev, beginrev
             dist = -1 * dist
 
         for x in xrange(beginrev, endrev, dist):
             # Old revisions don't support passing int.
             n = rl.node(x)
             rl.revision(n)
 
     timer, fm = gettimer(ui, opts)
     timer(d)
     fm.end()
 
 @command('perfrevlogchunks', revlogopts + formatteropts +
          [('e', 'engines', '', 'compression engines to use'),
           ('s', 'startrev', 0, 'revision to start at')],
          '-c|-m|FILE')
 def perfrevlogchunks(ui, repo, file_=None, engines=None, startrev=0, **opts):
     """Benchmark operations on revlog chunks.
 
     Logically, each revlog is a collection of fulltext revisions. However,
     stored within each revlog are "chunks" of possibly compressed data. This
     data needs to be read and decompressed or compressed and written.
 
     This command measures the time it takes to read+decompress and recompress
     chunks in a revlog. It effectively isolates I/O and compression performance.
     For measurements of higher-level operations like resolving revisions,
     see ``perfrevlogrevisions`` and ``perfrevlogrevision``.
     """
     rl = cmdutil.openrevlog(repo, 'perfrevlogchunks', file_, opts)
 
     # _chunkraw was renamed to _getsegmentforrevs.
     try:
         segmentforrevs = rl._getsegmentforrevs
     except AttributeError:
         segmentforrevs = rl._chunkraw
 
     # Verify engines argument.
     if engines:
         engines = set(e.strip() for e in engines.split(','))
         for engine in engines:
             try:
                 util.compressionengines[engine]
             except KeyError:
                 raise error.Abort('unknown compression engine: %s' % engine)
     else:
         engines = []
         for e in util.compengines:
             engine = util.compengines[e]
             try:
                 if engine.available():
                     engine.revlogcompressor().compress('dummy')
                     engines.append(e)
             except NotImplementedError:
                 pass
 
     revs = list(rl.revs(startrev, len(rl) - 1))
 
     def rlfh(rl):
         if rl._inline:
             return getsvfs(repo)(rl.indexfile)
         else:
             return getsvfs(repo)(rl.datafile)
 
     def doread():
         rl.clearcaches()
         for rev in revs:
             segmentforrevs(rev, rev)
 
     def doreadcachedfh():
         rl.clearcaches()
         fh = rlfh(rl)
         for rev in revs:
             segmentforrevs(rev, rev, df=fh)
 
     def doreadbatch():
         rl.clearcaches()
         segmentforrevs(revs[0], revs[-1])
 
     def doreadbatchcachedfh():
         rl.clearcaches()
         fh = rlfh(rl)
         segmentforrevs(revs[0], revs[-1], df=fh)
 
     def dochunk():
         rl.clearcaches()
         fh = rlfh(rl)
         for rev in revs:
             rl._chunk(rev, df=fh)
 
     chunks = [None]
 
     def dochunkbatch():
         rl.clearcaches()
         fh = rlfh(rl)
         # Save chunks as a side-effect.
         chunks[0] = rl._chunks(revs, df=fh)
 
     def docompress(compressor):
         rl.clearcaches()
 
         try:
             # Swap in the requested compression engine.
             oldcompressor = rl._compressor
             rl._compressor = compressor
             for chunk in chunks[0]:
                 rl.compress(chunk)
         finally:
             rl._compressor = oldcompressor
 
     benches = [
         (lambda: doread(), 'read'),
         (lambda: doreadcachedfh(), 'read w/ reused fd'),
         (lambda: doreadbatch(), 'read batch'),
         (lambda: doreadbatchcachedfh(), 'read batch w/ reused fd'),
         (lambda: dochunk(), 'chunk'),
         (lambda: dochunkbatch(), 'chunk batch'),
     ]
 
     for engine in sorted(engines):
         compressor = util.compengines[engine].revlogcompressor()
         benches.append((functools.partial(docompress, compressor),
                         'compress w/ %s' % engine))
 
     for fn, title in benches:
         timer, fm = gettimer(ui, opts)
         timer(fn, title=title)
         fm.end()
 
 @command('perfrevlogrevision', revlogopts + formatteropts +
          [('', 'cache', False, 'use caches instead of clearing')],
          '-c|-m|FILE REV')
 def perfrevlogrevision(ui, repo, file_, rev=None, cache=None, **opts):
     """Benchmark obtaining a revlog revision.
 
     Obtaining a revlog revision consists of roughly the following steps:
 
     1. Compute the delta chain
     2. Obtain the raw chunks for that delta chain
     3. Decompress each raw chunk
     4. Apply binary patches to obtain fulltext
     5. Verify hash of fulltext
 
     This command measures the time spent in each of these phases.
     """
     if opts.get('changelog') or opts.get('manifest'):
         file_, rev = None, file_
     elif rev is None:
         raise error.CommandError('perfrevlogrevision', 'invalid arguments')
 
     r = cmdutil.openrevlog(repo, 'perfrevlogrevision', file_, opts)
 
     # _chunkraw was renamed to _getsegmentforrevs.
     try:
         segmentforrevs = r._getsegmentforrevs
     except AttributeError:
         segmentforrevs = r._chunkraw
 
     node = r.lookup(rev)
     rev = r.rev(node)
 
     def getrawchunks(data, chain):
         start = r.start
         length = r.length
         inline = r._inline
         iosize = r._io.size
         buffer = util.buffer
         offset = start(chain[0])
 
         chunks = []
         ladd = chunks.append
 
         for rev in chain:
             chunkstart = start(rev)
             if inline:
                 chunkstart += (rev + 1) * iosize
             chunklength = length(rev)
             ladd(buffer(data, chunkstart - offset, chunklength))
 
         return chunks
 
     def dodeltachain(rev):
         if not cache:
             r.clearcaches()
         r._deltachain(rev)
 
     def doread(chain):
         if not cache:
             r.clearcaches()
         segmentforrevs(chain[0], chain[-1])
 
     def dorawchunks(data, chain):
         if not cache:
             r.clearcaches()
         getrawchunks(data, chain)
 
     def dodecompress(chunks):
         decomp = r.decompress
         for chunk in chunks:
             decomp(chunk)
 
     def dopatch(text, bins):
         if not cache:
             r.clearcaches()
         mdiff.patches(text, bins)
 
     def dohash(text):
         if not cache:
             r.clearcaches()
         r.checkhash(text, node, rev=rev)
 
     def dorevision():
         if not cache:
             r.clearcaches()
         r.revision(node)
 
     chain = r._deltachain(rev)[0]
     data = segmentforrevs(chain[0], chain[-1])[1]
     rawchunks = getrawchunks(data, chain)
     bins = r._chunks(chain)
     text = str(bins[0])
     bins = bins[1:]
     text = mdiff.patches(text, bins)
 
     benches = [
         (lambda: dorevision(), 'full'),
         (lambda: dodeltachain(rev), 'deltachain'),
         (lambda: doread(chain), 'read'),
         (lambda: dorawchunks(data, chain), 'rawchunks'),
         (lambda: dodecompress(rawchunks), 'decompress'),
         (lambda: dopatch(text, bins), 'patch'),
         (lambda: dohash(text), 'hash'),
     ]
 
     for fn, title in benches:
         timer, fm = gettimer(ui, opts)
         timer(fn, title=title)
         fm.end()
 
 @command('perfrevset',
          [('C', 'clear', False, 'clear volatile cache between each call.'),
           ('', 'contexts', False, 'obtain changectx for each revision')]
          + formatteropts, "REVSET")
 def perfrevset(ui, repo, expr, clear=False, contexts=False, **opts):
     """benchmark the execution time of a revset
 
     Use the --clean option if need to evaluate the impact of build volatile
     revisions set cache on the revset execution. Volatile cache hold filtered
     and obsolete related cache."""
     timer, fm = gettimer(ui, opts)
     def d():
         if clear:
             repo.invalidatevolatilesets()
         if contexts:
             for ctx in repo.set(expr): pass
         else:
             for r in repo.revs(expr): pass
     timer(d)
     fm.end()
 
 @command('perfvolatilesets',
          [('', 'clear-obsstore', False, 'drop obsstore between each call.'),
          ] + formatteropts)
 def perfvolatilesets(ui, repo, *names, **opts):
     """benchmark the computation of various volatile set
 
     Volatile set computes element related to filtering and obsolescence."""
     timer, fm = gettimer(ui, opts)
     repo = repo.unfiltered()
 
     def getobs(name):
         def d():
             repo.invalidatevolatilesets()
             if opts['clear_obsstore']:
                 clearfilecache(repo, 'obsstore')
             obsolete.getrevs(repo, name)
         return d
 
     allobs = sorted(obsolete.cachefuncs)
     if names:
         allobs = [n for n in allobs if n in names]
 
     for name in allobs:
         timer(getobs(name), title=name)
 
     def getfiltered(name):
         def d():
             repo.invalidatevolatilesets()
             if opts['clear_obsstore']:
                 clearfilecache(repo, 'obsstore')
             repoview.filterrevs(repo, name)
         return d
 
     allfilter = sorted(repoview.filtertable)
     if names:
         allfilter = [n for n in allfilter if n in names]
 
     for name in allfilter:
         timer(getfiltered(name), title=name)
     fm.end()
 
 @command('perfbranchmap',
          [('f', 'full', False,
            'Includes build time of subset'),
           ('', 'clear-revbranch', False,
            'purge the revbranch cache between computation'),
          ] + formatteropts)
 def perfbranchmap(ui, repo, *filternames, **opts):
     """benchmark the update of a branchmap
 
     This benchmarks the full repo.branchmap() call with read and write disabled
     """
     full = opts.get("full", False)
     clear_revbranch = opts.get("clear_revbranch", False)
     timer, fm = gettimer(ui, opts)
     def getbranchmap(filtername):
         """generate a benchmark function for the filtername"""
         if filtername is None:
             view = repo
         else:
             view = repo.filtered(filtername)
         def d():
             if clear_revbranch:
                 repo.revbranchcache()._clear()
             if full:
                 view._branchcaches.clear()
             else:
                 view._branchcaches.pop(filtername, None)
             view.branchmap()
         return d
     # add filter in smaller subset to bigger subset
     possiblefilters = set(repoview.filtertable)
     if filternames:
         possiblefilters &= set(filternames)
     subsettable = getbranchmapsubsettable()
     allfilters = []
     while possiblefilters:
         for name in possiblefilters:
             subset = subsettable.get(name)
             if subset not in possiblefilters:
                 break
         else:
             assert False, 'subset cycle %s!' % possiblefilters
         allfilters.append(name)
         possiblefilters.remove(name)
 
     # warm the cache
     if not full:
         for name in allfilters:
             repo.filtered(name).branchmap()
     if not filternames or 'unfiltered' in filternames:
         # add unfiltered
         allfilters.append(None)
 
     branchcacheread = safeattrsetter(branchmap, 'read')
     branchcachewrite = safeattrsetter(branchmap.branchcache, 'write')
     branchcacheread.set(lambda repo: None)
     branchcachewrite.set(lambda bc, repo: None)
     try:
         for name in allfilters:
             printname = name
             if name is None:
                 printname = 'unfiltered'
             timer(getbranchmap(name), title=str(printname))
     finally:
         branchcacheread.restore()
         branchcachewrite.restore()
     fm.end()
 
 @command('perfloadmarkers')
 def perfloadmarkers(ui, repo):
     """benchmark the time to parse the on-disk markers for a repo
 
     Result is the number of markers in the repo."""
     timer, fm = gettimer(ui)
     svfs = getsvfs(repo)
     timer(lambda: len(obsolete.obsstore(svfs)))
     fm.end()
 
 @command('perflrucachedict', formatteropts +
     [('', 'size', 4, 'size of cache'),
      ('', 'gets', 10000, 'number of key lookups'),
      ('', 'sets', 10000, 'number of key sets'),
      ('', 'mixed', 10000, 'number of mixed mode operations'),
      ('', 'mixedgetfreq', 50, 'frequency of get vs set ops in mixed mode')],
     norepo=True)
 def perflrucache(ui, size=4, gets=10000, sets=10000, mixed=10000,
                  mixedgetfreq=50, **opts):
     def doinit():
         for i in xrange(10000):
             util.lrucachedict(size)
 
     values = []
     for i in xrange(size):
         values.append(random.randint(0, sys.maxint))
 
     # Get mode fills the cache and tests raw lookup performance with no
     # eviction.
     getseq = []
     for i in xrange(gets):
         getseq.append(random.choice(values))
 
     def dogets():
         d = util.lrucachedict(size)
         for v in values:
             d[v] = v
         for key in getseq:
             value = d[key]
             value # silence pyflakes warning
 
     # Set mode tests insertion speed with cache eviction.
     setseq = []
     for i in xrange(sets):
         setseq.append(random.randint(0, sys.maxint))
 
     def dosets():
         d = util.lrucachedict(size)
         for v in setseq:
             d[v] = v
 
     # Mixed mode randomly performs gets and sets with eviction.
     mixedops = []
     for i in xrange(mixed):
         r = random.randint(0, 100)
         if r < mixedgetfreq:
             op = 0
         else:
             op = 1
 
         mixedops.append((op, random.randint(0, size * 2)))
 
     def domixed():
         d = util.lrucachedict(size)
 
         for op, v in mixedops:
             if op == 0:
                 try:
                     d[v]
                 except KeyError:
                     pass
             else:
                 d[v] = v
 
     benches = [
         (doinit, 'init'),
         (dogets, 'gets'),
         (dosets, 'sets'),
         (domixed, 'mixed')
     ]
 
     for fn, title in benches:
         timer, fm = gettimer(ui, opts)
         timer(fn, title=title)
         fm.end()
 
 @command('perfwrite', formatteropts)
 def perfwrite(ui, repo, **opts):
     """microbenchmark ui.write
     """
     timer, fm = gettimer(ui, opts)
     def write():
         for i in range(100000):
             ui.write(('Testing write performance\n'))
     timer(write)
     fm.end()
 
 def uisetup(ui):
     if (util.safehasattr(cmdutil, 'openrevlog') and
         not util.safehasattr(commands, 'debugrevlogopts')):
         # for "historical portability":
         # In this case, Mercurial should be 1.9 (or a79fea6b3e77) -
         # 3.7 (or 5606f7d0d063). Therefore, '--dir' option for
         # openrevlog() should cause failure, because it has been
         # available since 3.5 (or 49c583ca48c4).
         def openrevlog(orig, repo, cmd, file_, opts):
             if opts.get('dir') and not util.safehasattr(repo, 'dirlog'):
                 raise error.Abort("This version doesn't support --dir option",
                                   hint="use 3.5 or later")
             return orig(repo, cmd, file_, opts)
         extensions.wrapfunction(cmdutil, 'openrevlog', openrevlog)