record: remove unused import

hgext/record.py

@@ -1,671 +1,671 b''
 # record.py
 #
 # Copyright 2007 Bryan O'Sullivan <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2 or any later version.
 
 '''commands to interactively select changes for commit/qrefresh'''
 
 from mercurial.i18n import gettext, _
-from mercurial import cmdutil, commands, extensions, hg, mdiff, patch
+from mercurial import cmdutil, commands, extensions, hg, patch
 from mercurial import util
 import copy, cStringIO, errno, os, re, shutil, tempfile
 
 cmdtable = {}
 command = cmdutil.command(cmdtable)
 testedwith = 'internal'
 
 lines_re = re.compile(r'@@ -(\d+),(\d+) \+(\d+),(\d+) @@\s*(.*)')
 
 diffopts = [
     ('w', 'ignore-all-space', False,
      _('ignore white space when comparing lines')),
     ('b', 'ignore-space-change', None,
      _('ignore changes in the amount of white space')),
     ('B', 'ignore-blank-lines', None,
      _('ignore changes whose lines are all blank')),
 ]
 
 def scanpatch(fp):
     """like patch.iterhunks, but yield different events
 
     - ('file',    [header_lines + fromfile + tofile])
     - ('context', [context_lines])
     - ('hunk',    [hunk_lines])
     - ('range',   (-start,len, +start,len, proc))
     """
     lr = patch.linereader(fp)
 
     def scanwhile(first, p):
         """scan lr while predicate holds"""
         lines = [first]
         while True:
             line = lr.readline()
             if not line:
                 break
             if p(line):
                 lines.append(line)
             else:
                 lr.push(line)
                 break
         return lines
 
     while True:
         line = lr.readline()
         if not line:
             break
         if line.startswith('diff --git a/') or line.startswith('diff -r '):
             def notheader(line):
                 s = line.split(None, 1)
                 return not s or s[0] not in ('---', 'diff')
             header = scanwhile(line, notheader)
             fromfile = lr.readline()
             if fromfile.startswith('---'):
                 tofile = lr.readline()
                 header += [fromfile, tofile]
             else:
                 lr.push(fromfile)
             yield 'file', header
         elif line[0] == ' ':
             yield 'context', scanwhile(line, lambda l: l[0] in ' \\')
         elif line[0] in '-+':
             yield 'hunk', scanwhile(line, lambda l: l[0] in '-+\\')
         else:
             m = lines_re.match(line)
             if m:
                 yield 'range', m.groups()
             else:
                 raise patch.PatchError('unknown patch content: %r' % line)
 
 class header(object):
     """patch header
 
     XXX shouldn't we move this to mercurial/patch.py ?
     """
     diffgit_re = re.compile('diff --git a/(.*) b/(.*)$')
     diff_re = re.compile('diff -r .* (.*)$')
     allhunks_re = re.compile('(?:index|new file|deleted file) ')
     pretty_re = re.compile('(?:new file|deleted file) ')
     special_re = re.compile('(?:index|new|deleted|copy|rename) ')
 
     def __init__(self, header):
         self.header = header
         self.hunks = []
 
     def binary(self):
         return util.any(h.startswith('index ') for h in self.header)
 
     def pretty(self, fp):
         for h in self.header:
             if h.startswith('index '):
                 fp.write(_('this modifies a binary file (all or nothing)\n'))
                 break
             if self.pretty_re.match(h):
                 fp.write(h)
                 if self.binary():
                     fp.write(_('this is a binary file\n'))
                 break
             if h.startswith('---'):
                 fp.write(_('%d hunks, %d lines changed\n') %
                          (len(self.hunks),
                           sum([max(h.added, h.removed) for h in self.hunks])))
                 break
             fp.write(h)
 
     def write(self, fp):
         fp.write(''.join(self.header))
 
     def allhunks(self):
         return util.any(self.allhunks_re.match(h) for h in self.header)
 
     def files(self):
         match = self.diffgit_re.match(self.header[0])
         if match:
             fromfile, tofile = match.groups()
             if fromfile == tofile:
                 return [fromfile]
             return [fromfile, tofile]
         else:
             return self.diff_re.match(self.header[0]).groups()
 
     def filename(self):
         return self.files()[-1]
 
     def __repr__(self):
         return '<header %s>' % (' '.join(map(repr, self.files())))
 
     def special(self):
         return util.any(self.special_re.match(h) for h in self.header)
 
 def countchanges(hunk):
     """hunk -> (n+,n-)"""
     add = len([h for h in hunk if h[0] == '+'])
     rem = len([h for h in hunk if h[0] == '-'])
     return add, rem
 
 class hunk(object):
     """patch hunk
 
     XXX shouldn't we merge this with patch.hunk ?
     """
     maxcontext = 3
 
     def __init__(self, header, fromline, toline, proc, before, hunk, after):
         def trimcontext(number, lines):
             delta = len(lines) - self.maxcontext
             if False and delta > 0:
                 return number + delta, lines[:self.maxcontext]
             return number, lines
 
         self.header = header
         self.fromline, self.before = trimcontext(fromline, before)
         self.toline, self.after = trimcontext(toline, after)
         self.proc = proc
         self.hunk = hunk
         self.added, self.removed = countchanges(self.hunk)
 
     def write(self, fp):
         delta = len(self.before) + len(self.after)
         if self.after and self.after[-1] == '\\ No newline at end of file\n':
             delta -= 1
         fromlen = delta + self.removed
         tolen = delta + self.added
         fp.write('@@ -%d,%d +%d,%d @@%s\n' %
                  (self.fromline, fromlen, self.toline, tolen,
                   self.proc and (' ' + self.proc)))
         fp.write(''.join(self.before + self.hunk + self.after))
 
     pretty = write
 
     def filename(self):
         return self.header.filename()
 
     def __repr__(self):
         return '<hunk %r@%d>' % (self.filename(), self.fromline)
 
 def parsepatch(fp):
     """patch -> [] of headers -> [] of hunks """
     class parser(object):
         """patch parsing state machine"""
         def __init__(self):
             self.fromline = 0
             self.toline = 0
             self.proc = ''
             self.header = None
             self.context = []
             self.before = []
             self.hunk = []
             self.headers = []
 
         def addrange(self, limits):
             fromstart, fromend, tostart, toend, proc = limits
             self.fromline = int(fromstart)
             self.toline = int(tostart)
             self.proc = proc
 
         def addcontext(self, context):
             if self.hunk:
                 h = hunk(self.header, self.fromline, self.toline, self.proc,
                          self.before, self.hunk, context)
                 self.header.hunks.append(h)
                 self.fromline += len(self.before) + h.removed
                 self.toline += len(self.before) + h.added
                 self.before = []
                 self.hunk = []
                 self.proc = ''
             self.context = context
 
         def addhunk(self, hunk):
             if self.context:
                 self.before = self.context
                 self.context = []
             self.hunk = hunk
 
         def newfile(self, hdr):
             self.addcontext([])
             h = header(hdr)
             self.headers.append(h)
             self.header = h
 
         def finished(self):
             self.addcontext([])
             return self.headers
 
         transitions = {
             'file': {'context': addcontext,
                      'file': newfile,
                      'hunk': addhunk,
                      'range': addrange},
             'context': {'file': newfile,
                         'hunk': addhunk,
                         'range': addrange},
             'hunk': {'context': addcontext,
                      'file': newfile,
                      'range': addrange},
             'range': {'context': addcontext,
                       'hunk': addhunk},
             }
 
     p = parser()
 
     state = 'context'
     for newstate, data in scanpatch(fp):
         try:
             p.transitions[state][newstate](p, data)
         except KeyError:
             raise patch.PatchError('unhandled transition: %s -> %s' %
                                    (state, newstate))
         state = newstate
     return p.finished()
 
 def filterpatch(ui, headers):
     """Interactively filter patch chunks into applied-only chunks"""
 
     def prompt(skipfile, skipall, query, chunk):
         """prompt query, and process base inputs
 
         - y/n for the rest of file
         - y/n for the rest
         - ? (help)
         - q (quit)
 
         Return True/False and possibly updated skipfile and skipall.
         """
         newpatches = None
         if skipall is not None:
             return skipall, skipfile, skipall, newpatches
         if skipfile is not None:
             return skipfile, skipfile, skipall, newpatches
         while True:
             resps = _('[Ynesfdaq?]')
             choices = (_('&Yes, record this change'),
                     _('&No, skip this change'),
                     _('&Edit the change manually'),
                     _('&Skip remaining changes to this file'),
                     _('Record remaining changes to this &file'),
                     _('&Done, skip remaining changes and files'),
                     _('Record &all changes to all remaining files'),
                     _('&Quit, recording no changes'),
                     _('&?'))
             r = ui.promptchoice("%s %s" % (query, resps), choices)
             ui.write("\n")
             if r == 8: # ?
                 doc = gettext(record.__doc__)
                 c = doc.find('::') + 2
                 for l in doc[c:].splitlines():
                     if l.startswith('      '):
                         ui.write(l.strip(), '\n')
                 continue
             elif r == 0: # yes
                 ret = True
             elif r == 1: # no
                 ret = False
             elif r == 2: # Edit patch
                 if chunk is None:
                     ui.write(_('cannot edit patch for whole file'))
                     ui.write("\n")
                     continue
                 if chunk.header.binary():
                     ui.write(_('cannot edit patch for binary file'))
                     ui.write("\n")
                     continue
                 # Patch comment based on the Git one (based on comment at end of
                 # http://mercurial.selenic.com/wiki/RecordExtension)
                 phelp = '---' + _("""
 To remove '-' lines, make them ' ' lines (context).
 To remove '+' lines, delete them.
 Lines starting with # will be removed from the patch.
 
 If the patch applies cleanly, the edited hunk will immediately be
 added to the record list. If it does not apply cleanly, a rejects
 file will be generated: you can use that when you try again. If
 all lines of the hunk are removed, then the edit is aborted and
 the hunk is left unchanged.
 """)
                 (patchfd, patchfn) = tempfile.mkstemp(prefix="hg-editor-",
                         suffix=".diff", text=True)
                 ncpatchfp = None
                 try:
                     # Write the initial patch
                     f = os.fdopen(patchfd, "w")
                     chunk.header.write(f)
                     chunk.write(f)
                     f.write('\n'.join(['# ' + i for i in phelp.splitlines()]))
                     f.close()
                     # Start the editor and wait for it to complete
                     editor = ui.geteditor()
                     util.system("%s \"%s\"" % (editor, patchfn),
                             environ={'HGUSER': ui.username()},
                             onerr=util.Abort, errprefix=_("edit failed"),
                             out=ui.fout)
                     # Remove comment lines
                     patchfp = open(patchfn)
                     ncpatchfp = cStringIO.StringIO()
                     for line in patchfp:
                         if not line.startswith('#'):
                             ncpatchfp.write(line)
                     patchfp.close()
                     ncpatchfp.seek(0)
                     newpatches = parsepatch(ncpatchfp)
                 finally:
                     os.unlink(patchfn)
                     del ncpatchfp
                 # Signal that the chunk shouldn't be applied as-is, but
                 # provide the new patch to be used instead.
                 ret = False
             elif r == 3: # Skip
                 ret = skipfile = False
             elif r == 4: # file (Record remaining)
                 ret = skipfile = True
             elif r == 5: # done, skip remaining
                 ret = skipall = False
             elif r == 6: # all
                 ret = skipall = True
             elif r == 7: # quit
                 raise util.Abort(_('user quit'))
             return ret, skipfile, skipall, newpatches
 
     seen = set()
     applied = {}        # 'filename' -> [] of chunks
     skipfile, skipall = None, None
     pos, total = 1, sum(len(h.hunks) for h in headers)
     for h in headers:
         pos += len(h.hunks)
         skipfile = None
         fixoffset = 0
         hdr = ''.join(h.header)
         if hdr in seen:
             continue
         seen.add(hdr)
         if skipall is None:
             h.pretty(ui)
         msg = (_('examine changes to %s?') %
                _(' and ').join("'%s'" % f for f in h.files()))
         r, skipfile, skipall, np = prompt(skipfile, skipall, msg, None)
         if not r:
             continue
         applied[h.filename()] = [h]
         if h.allhunks():
             applied[h.filename()] += h.hunks
             continue
         for i, chunk in enumerate(h.hunks):
             if skipfile is None and skipall is None:
                 chunk.pretty(ui)
             if total == 1:
                 msg = _("record this change to '%s'?") % chunk.filename()
             else:
                 idx = pos - len(h.hunks) + i
                 msg = _("record change %d/%d to '%s'?") % (idx, total,
                                                            chunk.filename())
             r, skipfile, skipall, newpatches = prompt(skipfile,
                     skipall, msg, chunk)
             if r:
                 if fixoffset:
                     chunk = copy.copy(chunk)
                     chunk.toline += fixoffset
                 applied[chunk.filename()].append(chunk)
             elif newpatches is not None:
                 for newpatch in newpatches:
                     for newhunk in newpatch.hunks:
                         if fixoffset:
                             newhunk.toline += fixoffset
                         applied[newhunk.filename()].append(newhunk)
             else:
                 fixoffset += chunk.removed - chunk.added
     return sum([h for h in applied.itervalues()
                if h[0].special() or len(h) > 1], [])
 
 @command("record",
          # same options as commit + white space diff options
          commands.table['^commit|ci'][1][:] + diffopts,
           _('hg record [OPTION]... [FILE]...'))
 def record(ui, repo, *pats, **opts):
     '''interactively select changes to commit
 
     If a list of files is omitted, all changes reported by :hg:`status`
     will be candidates for recording.
 
     See :hg:`help dates` for a list of formats valid for -d/--date.
 
     You will be prompted for whether to record changes to each
     modified file, and for files with multiple changes, for each
     change to use. For each query, the following responses are
     possible::
 
       y - record this change
       n - skip this change
       e - edit this change manually
 
       s - skip remaining changes to this file
       f - record remaining changes to this file
 
       d - done, skip remaining changes and files
       a - record all changes to all remaining files
       q - quit, recording no changes
 
       ? - display help
 
     This command is not available when committing a merge.'''
 
     dorecord(ui, repo, commands.commit, 'commit', False, *pats, **opts)
 
 def qrefresh(origfn, ui, repo, *pats, **opts):
     if not opts['interactive']:
         return origfn(ui, repo, *pats, **opts)
 
     mq = extensions.find('mq')
 
     def committomq(ui, repo, *pats, **opts):
         # At this point the working copy contains only changes that
         # were accepted. All other changes were reverted.
         # We can't pass *pats here since qrefresh will undo all other
         # changed files in the patch that aren't in pats.
         mq.refresh(ui, repo, **opts)
 
     # backup all changed files
     dorecord(ui, repo, committomq, 'qrefresh', True, *pats, **opts)
 
 def qrecord(ui, repo, patch, *pats, **opts):
     '''interactively record a new patch
 
     See :hg:`help qnew` & :hg:`help record` for more information and
     usage.
     '''
 
     try:
         mq = extensions.find('mq')
     except KeyError:
         raise util.Abort(_("'mq' extension not loaded"))
 
     repo.mq.checkpatchname(patch)
 
     def committomq(ui, repo, *pats, **opts):
         opts['checkname'] = False
         mq.new(ui, repo, patch, *pats, **opts)
 
     dorecord(ui, repo, committomq, 'qnew', False, *pats, **opts)
 
 def qnew(origfn, ui, repo, patch, *args, **opts):
     if opts['interactive']:
         return qrecord(ui, repo, patch, *args, **opts)
     return origfn(ui, repo, patch, *args, **opts)
 
 def dorecord(ui, repo, commitfunc, cmdsuggest, backupall, *pats, **opts):
     if not ui.interactive():
         raise util.Abort(_('running non-interactively, use %s instead') %
                          cmdsuggest)
 
     # make sure username is set before going interactive
     ui.username()
 
     def recordfunc(ui, repo, message, match, opts):
         """This is generic record driver.
 
         Its job is to interactively filter local changes, and
         accordingly prepare working directory into a state in which the
         job can be delegated to a non-interactive commit command such as
         'commit' or 'qrefresh'.
 
         After the actual job is done by non-interactive command, the
         working directory is restored to its original state.
 
         In the end we'll record interesting changes, and everything else
         will be left in place, so the user can continue working.
         """
 
         merge = len(repo[None].parents()) > 1
         if merge:
             raise util.Abort(_('cannot partially commit a merge '
                                '(use "hg commit" instead)'))
 
         changes = repo.status(match=match)[:3]
         diffopts = patch.diffopts(ui, opts=dict(
             git=True, nodates=True,
             ignorews=opts.get('ignore_all_space'),
             ignorewsamount=opts.get('ignore_space_change'),
             ignoreblanklines=opts.get('ignore_blank_lines')))
         chunks = patch.diff(repo, changes=changes, opts=diffopts)
         fp = cStringIO.StringIO()
         fp.write(''.join(chunks))
         fp.seek(0)
 
         # 1. filter patch, so we have intending-to apply subset of it
         chunks = filterpatch(ui, parsepatch(fp))
         del fp
 
         contenders = set()
         for h in chunks:
             try:
                 contenders.update(set(h.files()))
             except AttributeError:
                 pass
 
         changed = changes[0] + changes[1] + changes[2]
         newfiles = [f for f in changed if f in contenders]
         if not newfiles:
             ui.status(_('no changes to record\n'))
             return 0
 
         modified = set(changes[0])
 
         # 2. backup changed files, so we can restore them in the end
         if backupall:
             tobackup = changed
         else:
             tobackup = [f for f in newfiles if f in modified]
 
         backups = {}
         if tobackup:
             backupdir = repo.join('record-backups')
             try:
                 os.mkdir(backupdir)
             except OSError, err:
                 if err.errno != errno.EEXIST:
                     raise
         try:
             # backup continues
             for f in tobackup:
                 fd, tmpname = tempfile.mkstemp(prefix=f.replace('/', '_')+'.',
                                                dir=backupdir)
                 os.close(fd)
                 ui.debug('backup %r as %r\n' % (f, tmpname))
                 util.copyfile(repo.wjoin(f), tmpname)
                 shutil.copystat(repo.wjoin(f), tmpname)
                 backups[f] = tmpname
 
             fp = cStringIO.StringIO()
             for c in chunks:
                 if c.filename() in backups:
                     c.write(fp)
             dopatch = fp.tell()
             fp.seek(0)
 
             # 3a. apply filtered patch to clean repo  (clean)
             if backups:
                 hg.revert(repo, repo.dirstate.p1(),
                           lambda key: key in backups)
 
             # 3b. (apply)
             if dopatch:
                 try:
                     ui.debug('applying patch\n')
                     ui.debug(fp.getvalue())
                     patch.internalpatch(ui, repo, fp, 1, eolmode=None)
                 except patch.PatchError, err:
                     raise util.Abort(str(err))
             del fp
 
             # 4. We prepared working directory according to filtered
             #    patch. Now is the time to delegate the job to
             #    commit/qrefresh or the like!
 
             # it is important to first chdir to repo root -- we'll call
             # a highlevel command with list of pathnames relative to
             # repo root
             cwd = os.getcwd()
             os.chdir(repo.root)
             try:
                 commitfunc(ui, repo, *newfiles, **opts)
             finally:
                 os.chdir(cwd)
 
             return 0
         finally:
             # 5. finally restore backed-up files
             try:
                 for realname, tmpname in backups.iteritems():
                     ui.debug('restoring %r to %r\n' % (tmpname, realname))
                     util.copyfile(tmpname, repo.wjoin(realname))
                     # Our calls to copystat() here and above are a
                     # hack to trick any editors that have f open that
                     # we haven't modified them.
                     #
                     # Also note that this racy as an editor could
                     # notice the file's mtime before we've finished
                     # writing it.
                     shutil.copystat(tmpname, repo.wjoin(realname))
                     os.unlink(tmpname)
                 if tobackup:
                     os.rmdir(backupdir)
             except OSError:
                 pass
 
     # wrap ui.write so diff output can be labeled/colorized
     def wrapwrite(orig, *args, **kw):
         label = kw.pop('label', '')
         for chunk, l in patch.difflabel(lambda: args):
             orig(chunk, label=label + l)
     oldwrite = ui.write
     extensions.wrapfunction(ui, 'write', wrapwrite)
     try:
         return cmdutil.commit(ui, repo, recordfunc, pats, opts)
     finally:
         ui.write = oldwrite
 
 cmdtable["qrecord"] = \
     (qrecord, [], # placeholder until mq is available
      _('hg qrecord [OPTION]... PATCH [FILE]...'))
 
 def uisetup(ui):
     try:
         mq = extensions.find('mq')
     except KeyError:
         return
 
     cmdtable["qrecord"] = \
         (qrecord,
          # same options as qnew, but copy them so we don't get
          # -i/--interactive for qrecord and add white space diff options
          mq.cmdtable['^qnew'][1][:] + diffopts,
          _('hg qrecord [OPTION]... PATCH [FILE]...'))
 
     _wrapcmd('qnew', mq.cmdtable, qnew, _("interactively record a new patch"))
     _wrapcmd('qrefresh', mq.cmdtable, qrefresh,
              _("interactively select changes to refresh"))
 
 def _wrapcmd(cmd, table, wrapfn, msg):
     entry = extensions.wrapcommand(table, cmd, wrapfn)
     entry[1].append(('i', 'interactive', None, msg))
 
 commands.inferrepo += " record qrecord"