patch: fix patch hunk/metdata synchronization (issue3384)

Git patches are parsed in two phases: 1) extract metadata, 2) parse actual
deltas and merge them with the previous metadata. We do this to avoid
dependency issues like "modify a; copy a to b", where "b" must be copied from
the unmodified "a".

Issue3384 is caused by flaky code I wrote to synchronize the patch metadata
with the emitted hunk:

 if (gitpatches and
     (gitpatches[-1][0] == afile or gitpatches[-1][1] == bfile)):
     gp = gitpatches.pop()[2]

With a patch like:

 diff --git a/a b/c
 copy from a
 copy to c
 --- a/a
 +++ b/c
 @@ -1,1 +1,2 @@
  a
 +a
 @@ -2,1 +2,2 @@
  a
 +a
 diff --git a/a b/a
 --- a/a
 +++ b/a
 @@ -1,1 +1,2 @@
  a
 +b

the first hunk of the first block is matched with the metadata for the block
"diff --git a/a b/c", then the second hunk of the first block is matched with
the metadata of the second block "diff --git a/a b/a", because of the "or" in
the code paste above. Turning the "or" into an "and" is not enough as we have
to deal with /dev/null cases for each file.

We I remove this broken piece of code:

 # copy/rename + modify should modify target, not source
 if gp.op in ('COPY', 'DELETE', 'RENAME', 'ADD') or gp.mode:
     afile = bfile

because "afile = bfile" set "afile" to stuff like "b/file" instead of "a/file",
and because this only happens for git patches, which afile/bfile are ignored
anyway by applydiff().

v2:
- Avoid a traceback on git metadata desynchronization

mercurial/patch.py

@@ -1,1867 +1,1879 b''
 # patch.py - patch file parsing routines
 #
 # Copyright 2006 Brendan Cully <[e-mail]>
 # Copyright 2007 Chris Mason <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2 or any later version.
 
 import cStringIO, email.Parser, os, errno, re
 import tempfile, zlib, shutil
 
 from i18n import _
 from node import hex, nullid, short
 import base85, mdiff, scmutil, util, diffhelpers, copies, encoding, error
 import context
 
 gitre = re.compile('diff --git a/(.*) b/(.*)')
 
 class PatchError(Exception):
     pass
 
 
 # public functions
 
 def split(stream):
     '''return an iterator of individual patches from a stream'''
     def isheader(line, inheader):
         if inheader and line[0] in (' ', '\t'):
             # continuation
             return True
         if line[0] in (' ', '-', '+'):
             # diff line - don't check for header pattern in there
             return False
         l = line.split(': ', 1)
         return len(l) == 2 and ' ' not in l[0]
 
     def chunk(lines):
         return cStringIO.StringIO(''.join(lines))
 
     def hgsplit(stream, cur):
         inheader = True
 
         for line in stream:
             if not line.strip():
                 inheader = False
             if not inheader and line.startswith('# HG changeset patch'):
                 yield chunk(cur)
                 cur = []
                 inheader = True
 
             cur.append(line)
 
         if cur:
             yield chunk(cur)
 
     def mboxsplit(stream, cur):
         for line in stream:
             if line.startswith('From '):
                 for c in split(chunk(cur[1:])):
                     yield c
                 cur = []
 
             cur.append(line)
 
         if cur:
             for c in split(chunk(cur[1:])):
                 yield c
 
     def mimesplit(stream, cur):
         def msgfp(m):
             fp = cStringIO.StringIO()
             g = email.Generator.Generator(fp, mangle_from_=False)
             g.flatten(m)
             fp.seek(0)
             return fp
 
         for line in stream:
             cur.append(line)
         c = chunk(cur)
 
         m = email.Parser.Parser().parse(c)
         if not m.is_multipart():
             yield msgfp(m)
         else:
             ok_types = ('text/plain', 'text/x-diff', 'text/x-patch')
             for part in m.walk():
                 ct = part.get_content_type()
                 if ct not in ok_types:
                     continue
                 yield msgfp(part)
 
     def headersplit(stream, cur):
         inheader = False
 
         for line in stream:
             if not inheader and isheader(line, inheader):
                 yield chunk(cur)
                 cur = []
                 inheader = True
             if inheader and not isheader(line, inheader):
                 inheader = False
 
             cur.append(line)
 
         if cur:
             yield chunk(cur)
 
     def remainder(cur):
         yield chunk(cur)
 
     class fiter(object):
         def __init__(self, fp):
             self.fp = fp
 
         def __iter__(self):
             return self
 
         def next(self):
             l = self.fp.readline()
             if not l:
                 raise StopIteration
             return l
 
     inheader = False
     cur = []
 
     mimeheaders = ['content-type']
 
     if not util.safehasattr(stream, 'next'):
         # http responses, for example, have readline but not next
         stream = fiter(stream)
 
     for line in stream:
         cur.append(line)
         if line.startswith('# HG changeset patch'):
             return hgsplit(stream, cur)
         elif line.startswith('From '):
             return mboxsplit(stream, cur)
         elif isheader(line, inheader):
             inheader = True
             if line.split(':', 1)[0].lower() in mimeheaders:
                 # let email parser handle this
                 return mimesplit(stream, cur)
         elif line.startswith('--- ') and inheader:
             # No evil headers seen by diff start, split by hand
             return headersplit(stream, cur)
         # Not enough info, keep reading
 
     # if we are here, we have a very plain patch
     return remainder(cur)
 
 def extract(ui, fileobj):
     '''extract patch from data read from fileobj.
 
     patch can be a normal patch or contained in an email message.
 
     return tuple (filename, message, user, date, branch, node, p1, p2).
     Any item in the returned tuple can be None. If filename is None,
     fileobj did not contain a patch. Caller must unlink filename when done.'''
 
     # attempt to detect the start of a patch
     # (this heuristic is borrowed from quilt)
     diffre = re.compile(r'^(?:Index:[ \t]|diff[ \t]|RCS file: |'
                         r'retrieving revision [0-9]+(\.[0-9]+)*$|'
                         r'---[ \t].*?^\+\+\+[ \t]|'
                         r'\*\*\*[ \t].*?^---[ \t])', re.MULTILINE|re.DOTALL)
 
     fd, tmpname = tempfile.mkstemp(prefix='hg-patch-')
     tmpfp = os.fdopen(fd, 'w')
     try:
         msg = email.Parser.Parser().parse(fileobj)
 
         subject = msg['Subject']
         user = msg['From']
         if not subject and not user:
             # Not an email, restore parsed headers if any
             subject = '\n'.join(': '.join(h) for h in msg.items()) + '\n'
 
         gitsendmail = 'git-send-email' in msg.get('X-Mailer', '')
         # should try to parse msg['Date']
         date = None
         nodeid = None
         branch = None
         parents = []
 
         if subject:
             if subject.startswith('[PATCH'):
                 pend = subject.find(']')
                 if pend >= 0:
                     subject = subject[pend + 1:].lstrip()
             subject = re.sub(r'\n[ \t]+', ' ', subject)
             ui.debug('Subject: %s\n' % subject)
         if user:
             ui.debug('From: %s\n' % user)
         diffs_seen = 0
         ok_types = ('text/plain', 'text/x-diff', 'text/x-patch')
         message = ''
         for part in msg.walk():
             content_type = part.get_content_type()
             ui.debug('Content-Type: %s\n' % content_type)
             if content_type not in ok_types:
                 continue
             payload = part.get_payload(decode=True)
             m = diffre.search(payload)
             if m:
                 hgpatch = False
                 hgpatchheader = False
                 ignoretext = False
 
                 ui.debug('found patch at byte %d\n' % m.start(0))
                 diffs_seen += 1
                 cfp = cStringIO.StringIO()
                 for line in payload[:m.start(0)].splitlines():
                     if line.startswith('# HG changeset patch') and not hgpatch:
                         ui.debug('patch generated by hg export\n')
                         hgpatch = True
                         hgpatchheader = True
                         # drop earlier commit message content
                         cfp.seek(0)
                         cfp.truncate()
                         subject = None
                     elif hgpatchheader:
                         if line.startswith('# User '):
                             user = line[7:]
                             ui.debug('From: %s\n' % user)
                         elif line.startswith("# Date "):
                             date = line[7:]
                         elif line.startswith("# Branch "):
                             branch = line[9:]
                         elif line.startswith("# Node ID "):
                             nodeid = line[10:]
                         elif line.startswith("# Parent "):
                             parents.append(line[9:].lstrip())
                         elif not line.startswith("# "):
                             hgpatchheader = False
                     elif line == '---' and gitsendmail:
                         ignoretext = True
                     if not hgpatchheader and not ignoretext:
                         cfp.write(line)
                         cfp.write('\n')
                 message = cfp.getvalue()
                 if tmpfp:
                     tmpfp.write(payload)
                     if not payload.endswith('\n'):
                         tmpfp.write('\n')
             elif not diffs_seen and message and content_type == 'text/plain':
                 message += '\n' + payload
     except:
         tmpfp.close()
         os.unlink(tmpname)
         raise
 
     if subject and not message.startswith(subject):
         message = '%s\n%s' % (subject, message)
     tmpfp.close()
     if not diffs_seen:
         os.unlink(tmpname)
         return None, message, user, date, branch, None, None, None
     p1 = parents and parents.pop(0) or None
     p2 = parents and parents.pop(0) or None
     return tmpname, message, user, date, branch, nodeid, p1, p2
 
 class patchmeta(object):
     """Patched file metadata
 
     'op' is the performed operation within ADD, DELETE, RENAME, MODIFY
     or COPY.  'path' is patched file path. 'oldpath' is set to the
     origin file when 'op' is either COPY or RENAME, None otherwise. If
     file mode is changed, 'mode' is a tuple (islink, isexec) where
     'islink' is True if the file is a symlink and 'isexec' is True if
     the file is executable. Otherwise, 'mode' is None.
     """
     def __init__(self, path):
         self.path = path
         self.oldpath = None
         self.mode = None
         self.op = 'MODIFY'
         self.binary = False
 
     def setmode(self, mode):
         islink = mode & 020000
         isexec = mode & 0100
         self.mode = (islink, isexec)
 
     def copy(self):
         other = patchmeta(self.path)
         other.oldpath = self.oldpath
         other.mode = self.mode
         other.op = self.op
         other.binary = self.binary
         return other
 
+    def _ispatchinga(self, afile):
+        if afile == '/dev/null':
+            return self.op == 'ADD'
+        return afile == 'a/' + (self.oldpath or self.path)
+
+    def _ispatchingb(self, bfile):
+        if bfile == '/dev/null':
+            return self.op == 'DELETE'
+        return bfile == 'b/' + self.path
+
+    def ispatching(self, afile, bfile):
+        return self._ispatchinga(afile) and self._ispatchingb(bfile)
+
     def __repr__(self):
         return "<patchmeta %s %r>" % (self.op, self.path)
 
 def readgitpatch(lr):
     """extract git-style metadata about patches from <patchname>"""
 
     # Filter patch for git information
     gp = None
     gitpatches = []
     for line in lr:
         line = line.rstrip(' \r\n')
         if line.startswith('diff --git'):
             m = gitre.match(line)
             if m:
                 if gp:
                     gitpatches.append(gp)
                 dst = m.group(2)
                 gp = patchmeta(dst)
         elif gp:
             if line.startswith('--- '):
                 gitpatches.append(gp)
                 gp = None
                 continue
             if line.startswith('rename from '):
                 gp.op = 'RENAME'
                 gp.oldpath = line[12:]
             elif line.startswith('rename to '):
                 gp.path = line[10:]
             elif line.startswith('copy from '):
                 gp.op = 'COPY'
                 gp.oldpath = line[10:]
             elif line.startswith('copy to '):
                 gp.path = line[8:]
             elif line.startswith('deleted file'):
                 gp.op = 'DELETE'
             elif line.startswith('new file mode '):
                 gp.op = 'ADD'
                 gp.setmode(int(line[-6:], 8))
             elif line.startswith('new mode '):
                 gp.setmode(int(line[-6:], 8))
             elif line.startswith('GIT binary patch'):
                 gp.binary = True
     if gp:
         gitpatches.append(gp)
 
     return gitpatches
 
 class linereader(object):
     # simple class to allow pushing lines back into the input stream
     def __init__(self, fp):
         self.fp = fp
         self.buf = []
 
     def push(self, line):
         if line is not None:
             self.buf.append(line)
 
     def readline(self):
         if self.buf:
             l = self.buf[0]
             del self.buf[0]
             return l
         return self.fp.readline()
 
     def __iter__(self):
         while True:
             l = self.readline()
             if not l:
                 break
             yield l
 
 class abstractbackend(object):
     def __init__(self, ui):
         self.ui = ui
 
     def getfile(self, fname):
         """Return target file data and flags as a (data, (islink,
         isexec)) tuple.
         """
         raise NotImplementedError
 
     def setfile(self, fname, data, mode, copysource):
         """Write data to target file fname and set its mode. mode is a
         (islink, isexec) tuple. If data is None, the file content should
         be left unchanged. If the file is modified after being copied,
         copysource is set to the original file name.
         """
         raise NotImplementedError
 
     def unlink(self, fname):
         """Unlink target file."""
         raise NotImplementedError
 
     def writerej(self, fname, failed, total, lines):
         """Write rejected lines for fname. total is the number of hunks
         which failed to apply and total the total number of hunks for this
         files.
         """
         pass
 
     def exists(self, fname):
         raise NotImplementedError
 
 class fsbackend(abstractbackend):
     def __init__(self, ui, basedir):
         super(fsbackend, self).__init__(ui)
         self.opener = scmutil.opener(basedir)
 
     def _join(self, f):
         return os.path.join(self.opener.base, f)
 
     def getfile(self, fname):
         path = self._join(fname)
         if os.path.islink(path):
             return (os.readlink(path), (True, False))
         isexec = False
         try:
             isexec = os.lstat(path).st_mode & 0100 != 0
         except OSError, e:
             if e.errno != errno.ENOENT:
                 raise
         return (self.opener.read(fname), (False, isexec))
 
     def setfile(self, fname, data, mode, copysource):
         islink, isexec = mode
         if data is None:
             util.setflags(self._join(fname), islink, isexec)
             return
         if islink:
             self.opener.symlink(data, fname)
         else:
             self.opener.write(fname, data)
             if isexec:
                 util.setflags(self._join(fname), False, True)
 
     def unlink(self, fname):
         try:
             util.unlinkpath(self._join(fname))
         except OSError, inst:
             if inst.errno != errno.ENOENT:
                 raise
 
     def writerej(self, fname, failed, total, lines):
         fname = fname + ".rej"
         self.ui.warn(
             _("%d out of %d hunks FAILED -- saving rejects to file %s\n") %
             (failed, total, fname))
         fp = self.opener(fname, 'w')
         fp.writelines(lines)
         fp.close()
 
     def exists(self, fname):
         return os.path.lexists(self._join(fname))
 
 class workingbackend(fsbackend):
     def __init__(self, ui, repo, similarity):
         super(workingbackend, self).__init__(ui, repo.root)
         self.repo = repo
         self.similarity = similarity
         self.removed = set()
         self.changed = set()
         self.copied = []
 
     def _checkknown(self, fname):
         if self.repo.dirstate[fname] == '?' and self.exists(fname):
             raise PatchError(_('cannot patch %s: file is not tracked') % fname)
 
     def setfile(self, fname, data, mode, copysource):
         self._checkknown(fname)
         super(workingbackend, self).setfile(fname, data, mode, copysource)
         if copysource is not None:
             self.copied.append((copysource, fname))
         self.changed.add(fname)
 
     def unlink(self, fname):
         self._checkknown(fname)
         super(workingbackend, self).unlink(fname)
         self.removed.add(fname)
         self.changed.add(fname)
 
     def close(self):
         wctx = self.repo[None]
         addremoved = set(self.changed)
         for src, dst in self.copied:
             scmutil.dirstatecopy(self.ui, self.repo, wctx, src, dst)
         if self.removed:
             wctx.forget(sorted(self.removed))
             for f in self.removed:
                 if f not in self.repo.dirstate:
                     # File was deleted and no longer belongs to the
                     # dirstate, it was probably marked added then
                     # deleted, and should not be considered by
                     # addremove().
                     addremoved.discard(f)
         if addremoved:
             cwd = self.repo.getcwd()
             if cwd:
                 addremoved = [util.pathto(self.repo.root, cwd, f)
                               for f in addremoved]
             scmutil.addremove(self.repo, addremoved, similarity=self.similarity)
         return sorted(self.changed)
 
 class filestore(object):
     def __init__(self, maxsize=None):
         self.opener = None
         self.files = {}
         self.created = 0
         self.maxsize = maxsize
         if self.maxsize is None:
             self.maxsize = 4*(2**20)
         self.size = 0
         self.data = {}
 
     def setfile(self, fname, data, mode, copied=None):
         if self.maxsize < 0 or (len(data) + self.size) <= self.maxsize:
             self.data[fname] = (data, mode, copied)
             self.size += len(data)
         else:
             if self.opener is None:
                 root = tempfile.mkdtemp(prefix='hg-patch-')
                 self.opener = scmutil.opener(root)
             # Avoid filename issues with these simple names
             fn = str(self.created)
             self.opener.write(fn, data)
             self.created += 1
             self.files[fname] = (fn, mode, copied)
 
     def getfile(self, fname):
         if fname in self.data:
             return self.data[fname]
         if not self.opener or fname not in self.files:
             raise IOError()
         fn, mode, copied = self.files[fname]
         return self.opener.read(fn), mode, copied
 
     def close(self):
         if self.opener:
             shutil.rmtree(self.opener.base)
 
 class repobackend(abstractbackend):
     def __init__(self, ui, repo, ctx, store):
         super(repobackend, self).__init__(ui)
         self.repo = repo
         self.ctx = ctx
         self.store = store
         self.changed = set()
         self.removed = set()
         self.copied = {}
 
     def _checkknown(self, fname):
         if fname not in self.ctx:
             raise PatchError(_('cannot patch %s: file is not tracked') % fname)
 
     def getfile(self, fname):
         try:
             fctx = self.ctx[fname]
         except error.LookupError:
             raise IOError()
         flags = fctx.flags()
         return fctx.data(), ('l' in flags, 'x' in flags)
 
     def setfile(self, fname, data, mode, copysource):
         if copysource:
             self._checkknown(copysource)
         if data is None:
             data = self.ctx[fname].data()
         self.store.setfile(fname, data, mode, copysource)
         self.changed.add(fname)
         if copysource:
             self.copied[fname] = copysource
 
     def unlink(self, fname):
         self._checkknown(fname)
         self.removed.add(fname)
 
     def exists(self, fname):
         return fname in self.ctx
 
     def close(self):
         return self.changed | self.removed
 
 # @@ -start,len +start,len @@ or @@ -start +start @@ if len is 1
 unidesc = re.compile('@@ -(\d+)(?:,(\d+))? \+(\d+)(?:,(\d+))? @@')
 contextdesc = re.compile('(?:---|\*\*\*) (\d+)(?:,(\d+))? (?:---|\*\*\*)')
 eolmodes = ['strict', 'crlf', 'lf', 'auto']
 
 class patchfile(object):
     def __init__(self, ui, gp, backend, store, eolmode='strict'):
         self.fname = gp.path
         self.eolmode = eolmode
         self.eol = None
         self.backend = backend
         self.ui = ui
         self.lines = []
         self.exists = False
         self.missing = True
         self.mode = gp.mode
         self.copysource = gp.oldpath
         self.create = gp.op in ('ADD', 'COPY', 'RENAME')
         self.remove = gp.op == 'DELETE'
         try:
             if self.copysource is None:
                 data, mode = backend.getfile(self.fname)
                 self.exists = True
             else:
                 data, mode = store.getfile(self.copysource)[:2]
                 self.exists = backend.exists(self.fname)
             self.missing = False
             if data:
                 self.lines = mdiff.splitnewlines(data)
             if self.mode is None:
                 self.mode = mode
             if self.lines:
                 # Normalize line endings
                 if self.lines[0].endswith('\r\n'):
                     self.eol = '\r\n'
                 elif self.lines[0].endswith('\n'):
                     self.eol = '\n'
                 if eolmode != 'strict':
                     nlines = []
                     for l in self.lines:
                         if l.endswith('\r\n'):
                             l = l[:-2] + '\n'
                         nlines.append(l)
                     self.lines = nlines
         except IOError:
             if self.create:
                 self.missing = False
             if self.mode is None:
                 self.mode = (False, False)
         if self.missing:
              self.ui.warn(_("unable to find '%s' for patching\n") % self.fname)
 
         self.hash = {}
         self.dirty = 0
         self.offset = 0
         self.skew = 0
         self.rej = []
         self.fileprinted = False
         self.printfile(False)
         self.hunks = 0
 
     def writelines(self, fname, lines, mode):
         if self.eolmode == 'auto':
             eol = self.eol
         elif self.eolmode == 'crlf':
             eol = '\r\n'
         else:
             eol = '\n'
 
         if self.eolmode != 'strict' and eol and eol != '\n':
             rawlines = []
             for l in lines:
                 if l and l[-1] == '\n':
                     l = l[:-1] + eol
                 rawlines.append(l)
             lines = rawlines
 
         self.backend.setfile(fname, ''.join(lines), mode, self.copysource)
 
     def printfile(self, warn):
         if self.fileprinted:
             return
         if warn or self.ui.verbose:
             self.fileprinted = True
         s = _("patching file %s\n") % self.fname
         if warn:
             self.ui.warn(s)
         else:
             self.ui.note(s)
 
 
     def findlines(self, l, linenum):
         # looks through the hash and finds candidate lines.  The
         # result is a list of line numbers sorted based on distance
         # from linenum
 
         cand = self.hash.get(l, [])
         if len(cand) > 1:
             # resort our list of potentials forward then back.
             cand.sort(key=lambda x: abs(x - linenum))
         return cand
 
     def write_rej(self):
         # our rejects are a little different from patch(1).  This always
         # creates rejects in the same form as the original patch.  A file
         # header is inserted so that you can run the reject through patch again
         # without having to type the filename.
         if not self.rej:
             return
         base = os.path.basename(self.fname)
         lines = ["--- %s\n+++ %s\n" % (base, base)]
         for x in self.rej:
             for l in x.hunk:
                 lines.append(l)
                 if l[-1] != '\n':
                     lines.append("\n\ No newline at end of file\n")
         self.backend.writerej(self.fname, len(self.rej), self.hunks, lines)
 
     def apply(self, h):
         if not h.complete():
             raise PatchError(_("bad hunk #%d %s (%d %d %d %d)") %
                             (h.number, h.desc, len(h.a), h.lena, len(h.b),
                             h.lenb))
 
         self.hunks += 1
 
         if self.missing:
             self.rej.append(h)
             return -1
 
         if self.exists and self.create:
             if self.copysource:
                 self.ui.warn(_("cannot create %s: destination already "
                                "exists\n" % self.fname))
             else:
                 self.ui.warn(_("file %s already exists\n") % self.fname)
             self.rej.append(h)
             return -1
 
         if isinstance(h, binhunk):
             if self.remove:
                 self.backend.unlink(self.fname)
             else:
                 self.lines[:] = h.new()
                 self.offset += len(h.new())
                 self.dirty = True
             return 0
 
         horig = h
         if (self.eolmode in ('crlf', 'lf')
             or self.eolmode == 'auto' and self.eol):
             # If new eols are going to be normalized, then normalize
             # hunk data before patching. Otherwise, preserve input
             # line-endings.
             h = h.getnormalized()
 
         # fast case first, no offsets, no fuzz
         old, oldstart, new, newstart = h.fuzzit(0, False)
         oldstart += self.offset
         orig_start = oldstart
         # if there's skew we want to emit the "(offset %d lines)" even
         # when the hunk cleanly applies at start + skew, so skip the
         # fast case code
         if (self.skew == 0 and
             diffhelpers.testhunk(old, self.lines, oldstart) == 0):
             if self.remove:
                 self.backend.unlink(self.fname)
             else:
                 self.lines[oldstart:oldstart + len(old)] = new
                 self.offset += len(new) - len(old)
                 self.dirty = True
             return 0
 
         # ok, we couldn't match the hunk. Lets look for offsets and fuzz it
         self.hash = {}
         for x, s in enumerate(self.lines):
             self.hash.setdefault(s, []).append(x)
 
         for fuzzlen in xrange(3):
             for toponly in [True, False]:
                 old, oldstart, new, newstart = h.fuzzit(fuzzlen, toponly)
                 oldstart = oldstart + self.offset + self.skew
                 oldstart = min(oldstart, len(self.lines))
                 if old:
                     cand = self.findlines(old[0][1:], oldstart)
                 else:
                     # Only adding lines with no or fuzzed context, just
                     # take the skew in account
                     cand = [oldstart]
 
                 for l in cand:
                     if not old or diffhelpers.testhunk(old, self.lines, l) == 0:
                         self.lines[l : l + len(old)] = new
                         self.offset += len(new) - len(old)
                         self.skew = l - orig_start
                         self.dirty = True
                         offset = l - orig_start - fuzzlen
                         if fuzzlen:
                             msg = _("Hunk #%d succeeded at %d "
                                     "with fuzz %d "
                                     "(offset %d lines).\n")
                             self.printfile(True)
                             self.ui.warn(msg %
                                 (h.number, l + 1, fuzzlen, offset))
                         else:
                             msg = _("Hunk #%d succeeded at %d "
                                     "(offset %d lines).\n")
                             self.ui.note(msg % (h.number, l + 1, offset))
                         return fuzzlen
         self.printfile(True)
         self.ui.warn(_("Hunk #%d FAILED at %d\n") % (h.number, orig_start))
         self.rej.append(horig)
         return -1
 
     def close(self):
         if self.dirty:
             self.writelines(self.fname, self.lines, self.mode)
         self.write_rej()
         return len(self.rej)
 
 class hunk(object):
     def __init__(self, desc, num, lr, context):
         self.number = num
         self.desc = desc
         self.hunk = [desc]
         self.a = []
         self.b = []
         self.starta = self.lena = None
         self.startb = self.lenb = None
         if lr is not None:
             if context:
                 self.read_context_hunk(lr)
             else:
                 self.read_unified_hunk(lr)
 
     def getnormalized(self):
         """Return a copy with line endings normalized to LF."""
 
         def normalize(lines):
             nlines = []
             for line in lines:
                 if line.endswith('\r\n'):
                     line = line[:-2] + '\n'
                 nlines.append(line)
             return nlines
 
         # Dummy object, it is rebuilt manually
         nh = hunk(self.desc, self.number, None, None)
         nh.number = self.number
         nh.desc = self.desc
         nh.hunk = self.hunk
         nh.a = normalize(self.a)
         nh.b = normalize(self.b)
         nh.starta = self.starta
         nh.startb = self.startb
         nh.lena = self.lena
         nh.lenb = self.lenb
         return nh
 
     def read_unified_hunk(self, lr):
         m = unidesc.match(self.desc)
         if not m:
             raise PatchError(_("bad hunk #%d") % self.number)
         self.starta, self.lena, self.startb, self.lenb = m.groups()
         if self.lena is None:
             self.lena = 1
         else:
             self.lena = int(self.lena)
         if self.lenb is None:
             self.lenb = 1
         else:
             self.lenb = int(self.lenb)
         self.starta = int(self.starta)
         self.startb = int(self.startb)
         diffhelpers.addlines(lr, self.hunk, self.lena, self.lenb, self.a, self.b)
         # if we hit eof before finishing out the hunk, the last line will
         # be zero length.  Lets try to fix it up.
         while len(self.hunk[-1]) == 0:
             del self.hunk[-1]
             del self.a[-1]
             del self.b[-1]
             self.lena -= 1
             self.lenb -= 1
         self._fixnewline(lr)
 
     def read_context_hunk(self, lr):
         self.desc = lr.readline()
         m = contextdesc.match(self.desc)
         if not m:
             raise PatchError(_("bad hunk #%d") % self.number)
         self.starta, aend = m.groups()
         self.starta = int(self.starta)
         if aend is None:
             aend = self.starta
         self.lena = int(aend) - self.starta
         if self.starta:
             self.lena += 1
         for x in xrange(self.lena):
             l = lr.readline()
             if l.startswith('---'):
                 # lines addition, old block is empty
                 lr.push(l)
                 break
             s = l[2:]
             if l.startswith('- ') or l.startswith('! '):
                 u = '-' + s
             elif l.startswith('  '):
                 u = ' ' + s
             else:
                 raise PatchError(_("bad hunk #%d old text line %d") %
                                  (self.number, x))
             self.a.append(u)
             self.hunk.append(u)
 
         l = lr.readline()
         if l.startswith('\ '):
             s = self.a[-1][:-1]
             self.a[-1] = s
             self.hunk[-1] = s
             l = lr.readline()
         m = contextdesc.match(l)
         if not m:
             raise PatchError(_("bad hunk #%d") % self.number)
         self.startb, bend = m.groups()
         self.startb = int(self.startb)
         if bend is None:
             bend = self.startb
         self.lenb = int(bend) - self.startb
         if self.startb:
             self.lenb += 1
         hunki = 1
         for x in xrange(self.lenb):
             l = lr.readline()
             if l.startswith('\ '):
                 # XXX: the only way to hit this is with an invalid line range.
                 # The no-eol marker is not counted in the line range, but I
                 # guess there are diff(1) out there which behave differently.
                 s = self.b[-1][:-1]
                 self.b[-1] = s
                 self.hunk[hunki - 1] = s
                 continue
             if not l:
                 # line deletions, new block is empty and we hit EOF
                 lr.push(l)
                 break
             s = l[2:]
             if l.startswith('+ ') or l.startswith('! '):
                 u = '+' + s
             elif l.startswith('  '):
                 u = ' ' + s
             elif len(self.b) == 0:
                 # line deletions, new block is empty
                 lr.push(l)
                 break
             else:
                 raise PatchError(_("bad hunk #%d old text line %d") %
                                  (self.number, x))
             self.b.append(s)
             while True:
                 if hunki >= len(self.hunk):
                     h = ""
                 else:
                     h = self.hunk[hunki]
                 hunki += 1
                 if h == u:
                     break
                 elif h.startswith('-'):
                     continue
                 else:
                     self.hunk.insert(hunki - 1, u)
                     break
 
         if not self.a:
             # this happens when lines were only added to the hunk
             for x in self.hunk:
                 if x.startswith('-') or x.startswith(' '):
                     self.a.append(x)
         if not self.b:
             # this happens when lines were only deleted from the hunk
             for x in self.hunk:
                 if x.startswith('+') or x.startswith(' '):
                     self.b.append(x[1:])
         # @@ -start,len +start,len @@
         self.desc = "@@ -%d,%d +%d,%d @@\n" % (self.starta, self.lena,
                                              self.startb, self.lenb)
         self.hunk[0] = self.desc
         self._fixnewline(lr)
 
     def _fixnewline(self, lr):
         l = lr.readline()
         if l.startswith('\ '):
             diffhelpers.fix_newline(self.hunk, self.a, self.b)
         else:
             lr.push(l)
 
     def complete(self):
         return len(self.a) == self.lena and len(self.b) == self.lenb
 
     def _fuzzit(self, old, new, fuzz, toponly):
         # this removes context lines from the top and bottom of list 'l'.  It
         # checks the hunk to make sure only context lines are removed, and then
         # returns a new shortened list of lines.
         fuzz = min(fuzz, len(old))
         if fuzz:
             top = 0
             bot = 0
             hlen = len(self.hunk)
             for x in xrange(hlen - 1):
                 # the hunk starts with the @@ line, so use x+1
                 if self.hunk[x + 1][0] == ' ':
                     top += 1
                 else:
                     break
             if not toponly:
                 for x in xrange(hlen - 1):
                     if self.hunk[hlen - bot - 1][0] == ' ':
                         bot += 1
                     else:
                         break
 
             bot = min(fuzz, bot)
             top = min(fuzz, top)
             return old[top:len(old)-bot], new[top:len(new)-bot], top
         return old, new, 0
 
     def fuzzit(self, fuzz, toponly):
         old, new, top = self._fuzzit(self.a, self.b, fuzz, toponly)
         oldstart = self.starta + top
         newstart = self.startb + top
         # zero length hunk ranges already have their start decremented
         if self.lena:
             oldstart -= 1
         if self.lenb:
             newstart -= 1
         return old, oldstart, new, newstart
 
 class binhunk(object):
     'A binary patch file. Only understands literals so far.'
     def __init__(self, lr):
         self.text = None
         self.hunk = ['GIT binary patch\n']
         self._read(lr)
 
     def complete(self):
         return self.text is not None
 
     def new(self):
         return [self.text]
 
     def _read(self, lr):
         line = lr.readline()
         self.hunk.append(line)
         while line and not line.startswith('literal '):
             line = lr.readline()
             self.hunk.append(line)
         if not line:
             raise PatchError(_('could not extract binary patch'))
         size = int(line[8:].rstrip())
         dec = []
         line = lr.readline()
         self.hunk.append(line)
         while len(line) > 1:
             l = line[0]
             if l <= 'Z' and l >= 'A':
                 l = ord(l) - ord('A') + 1
             else:
                 l = ord(l) - ord('a') + 27
             dec.append(base85.b85decode(line[1:-1])[:l])
             line = lr.readline()
             self.hunk.append(line)
         text = zlib.decompress(''.join(dec))
         if len(text) != size:
             raise PatchError(_('binary patch is %d bytes, not %d') %
                              len(text), size)
         self.text = text
 
 def parsefilename(str):
     # --- filename \t|space stuff
     s = str[4:].rstrip('\r\n')
     i = s.find('\t')
     if i < 0:
         i = s.find(' ')
         if i < 0:
             return s
     return s[:i]
 
 def pathstrip(path, strip):
     pathlen = len(path)
     i = 0
     if strip == 0:
         return '', path.rstrip()
     count = strip
     while count > 0:
         i = path.find('/', i)
         if i == -1:
             raise PatchError(_("unable to strip away %d of %d dirs from %s") %
                              (count, strip, path))
         i += 1
         # consume '//' in the path
         while i < pathlen - 1 and path[i] == '/':
             i += 1
         count -= 1
     return path[:i].lstrip(), path[i:].rstrip()
 
 def makepatchmeta(backend, afile_orig, bfile_orig, hunk, strip):
     nulla = afile_orig == "/dev/null"
     nullb = bfile_orig == "/dev/null"
     create = nulla and hunk.starta == 0 and hunk.lena == 0
     remove = nullb and hunk.startb == 0 and hunk.lenb == 0
     abase, afile = pathstrip(afile_orig, strip)
     gooda = not nulla and backend.exists(afile)
     bbase, bfile = pathstrip(bfile_orig, strip)
     if afile == bfile:
         goodb = gooda
     else:
         goodb = not nullb and backend.exists(bfile)
     missing = not goodb and not gooda and not create
 
     # some diff programs apparently produce patches where the afile is
     # not /dev/null, but afile starts with bfile
     abasedir = afile[:afile.rfind('/') + 1]
     bbasedir = bfile[:bfile.rfind('/') + 1]
     if (missing and abasedir == bbasedir and afile.startswith(bfile)
         and hunk.starta == 0 and hunk.lena == 0):
         create = True
         missing = False
 
     # If afile is "a/b/foo" and bfile is "a/b/foo.orig" we assume the
     # diff is between a file and its backup. In this case, the original
     # file should be patched (see original mpatch code).
     isbackup = (abase == bbase and bfile.startswith(afile))
     fname = None
     if not missing:
         if gooda and goodb:
             fname = isbackup and afile or bfile
         elif gooda:
             fname = afile
 
     if not fname:
         if not nullb:
             fname = isbackup and afile or bfile
         elif not nulla:
             fname = afile
         else:
             raise PatchError(_("undefined source and destination files"))
 
     gp = patchmeta(fname)
     if create:
         gp.op = 'ADD'
     elif remove:
         gp.op = 'DELETE'
     return gp
 
 def scangitpatch(lr, firstline):
     """
     Git patches can emit:
     - rename a to b
     - change b
     - copy a to c
     - change c
 
     We cannot apply this sequence as-is, the renamed 'a' could not be
     found for it would have been renamed already. And we cannot copy
     from 'b' instead because 'b' would have been changed already. So
     we scan the git patch for copy and rename commands so we can
     perform the copies ahead of time.
     """
     pos = 0
     try:
         pos = lr.fp.tell()
         fp = lr.fp
     except IOError:
         fp = cStringIO.StringIO(lr.fp.read())
     gitlr = linereader(fp)
     gitlr.push(firstline)
     gitpatches = readgitpatch(gitlr)
     fp.seek(pos)
     return gitpatches
 
 def iterhunks(fp):
     """Read a patch and yield the following events:
     - ("file", afile, bfile, firsthunk): select a new target file.
     - ("hunk", hunk): a new hunk is ready to be applied, follows a
     "file" event.
     - ("git", gitchanges): current diff is in git format, gitchanges
     maps filenames to gitpatch records. Unique event.
     """
     afile = ""
     bfile = ""
     state = None
     hunknum = 0
     emitfile = newfile = False
     gitpatches = None
 
     # our states
     BFILE = 1
     context = None
     lr = linereader(fp)
 
     while True:
         x = lr.readline()
         if not x:
             break
         if state == BFILE and (
             (not context and x[0] == '@')
             or (context is not False and x.startswith('***************'))
             or x.startswith('GIT binary patch')):
             gp = None
             if (gitpatches and
-                (gitpatches[-1][0] == afile or gitpatches[-1][1] == bfile)):
-                gp = gitpatches.pop()[2]
+                gitpatches[-1].ispatching(afile, bfile)):
+                gp = gitpatches.pop()
             if x.startswith('GIT binary patch'):
                 h = binhunk(lr)
             else:
                 if context is None and x.startswith('***************'):
                     context = True
                 h = hunk(x, hunknum + 1, lr, context)
             hunknum += 1
             if emitfile:
                 emitfile = False
                 yield 'file', (afile, bfile, h, gp and gp.copy() or None)
             yield 'hunk', h
         elif x.startswith('diff --git'):
             m = gitre.match(x)
             if not m:
                 continue
-            if not gitpatches:
+            if gitpatches is None:
                 # scan whole input for git metadata
-                gitpatches = [('a/' + gp.path, 'b/' + gp.path, gp) for gp
-                              in scangitpatch(lr, x)]
-                yield 'git', [g[2].copy() for g in gitpatches
-                              if g[2].op in ('COPY', 'RENAME')]
+                gitpatches = scangitpatch(lr, x)
+                yield 'git', [g.copy() for g in gitpatches
+                              if g.op in ('COPY', 'RENAME')]
                 gitpatches.reverse()
             afile = 'a/' + m.group(1)
             bfile = 'b/' + m.group(2)
-            while afile != gitpatches[-1][0] and bfile != gitpatches[-1][1]:
-                gp = gitpatches.pop()[2]
+            while gitpatches and not gitpatches[-1].ispatching(afile, bfile):
+                gp = gitpatches.pop()
                 yield 'file', ('a/' + gp.path, 'b/' + gp.path, None, gp.copy())
-            gp = gitpatches[-1][2]
-            # copy/rename + modify should modify target, not source
-            if gp.op in ('COPY', 'DELETE', 'RENAME', 'ADD') or gp.mode:
-                afile = bfile
+            if not gitpatches:
+                raise PatchError(_('failed to synchronize metadata for "%s"')
+                                 % afile[2:])
+            gp = gitpatches[-1]
             newfile = True
         elif x.startswith('---'):
             # check for a unified diff
             l2 = lr.readline()
             if not l2.startswith('+++'):
                 lr.push(l2)
                 continue
             newfile = True
             context = False
             afile = parsefilename(x)
             bfile = parsefilename(l2)
         elif x.startswith('***'):
             # check for a context diff
             l2 = lr.readline()
             if not l2.startswith('---'):
                 lr.push(l2)
                 continue
             l3 = lr.readline()
             lr.push(l3)
             if not l3.startswith("***************"):
                 lr.push(l2)
                 continue
             newfile = True
             context = True
             afile = parsefilename(x)
             bfile = parsefilename(l2)
 
         if newfile:
             newfile = False
             emitfile = True
             state = BFILE
             hunknum = 0
 
     while gitpatches:
-        gp = gitpatches.pop()[2]
+        gp = gitpatches.pop()
         yield 'file', ('a/' + gp.path, 'b/' + gp.path, None, gp.copy())
 
 def applydiff(ui, fp, backend, store, strip=1, eolmode='strict'):
     """Reads a patch from fp and tries to apply it.
 
     Returns 0 for a clean patch, -1 if any rejects were found and 1 if
     there was any fuzz.
 
     If 'eolmode' is 'strict', the patch content and patched file are
     read in binary mode. Otherwise, line endings are ignored when
     patching then normalized according to 'eolmode'.
     """
     return _applydiff(ui, fp, patchfile, backend, store, strip=strip,
                       eolmode=eolmode)
 
 def _applydiff(ui, fp, patcher, backend, store, strip=1,
                eolmode='strict'):
 
     def pstrip(p):
         return pathstrip(p, strip - 1)[1]
 
     rejects = 0
     err = 0
     current_file = None
 
     for state, values in iterhunks(fp):
         if state == 'hunk':
             if not current_file:
                 continue
             ret = current_file.apply(values)
             if ret > 0:
                 err = 1
         elif state == 'file':
             if current_file:
                 rejects += current_file.close()
                 current_file = None
             afile, bfile, first_hunk, gp = values
             if gp:
                 gp.path = pstrip(gp.path)
                 if gp.oldpath:
                     gp.oldpath = pstrip(gp.oldpath)
             else:
                 gp = makepatchmeta(backend, afile, bfile, first_hunk, strip)
             if gp.op == 'RENAME':
                 backend.unlink(gp.oldpath)
             if not first_hunk:
                 if gp.op == 'DELETE':
                     backend.unlink(gp.path)
                     continue
                 data, mode = None, None
                 if gp.op in ('RENAME', 'COPY'):
                     data, mode = store.getfile(gp.oldpath)[:2]
                 if gp.mode:
                     mode = gp.mode
                     if gp.op == 'ADD':
                         # Added files without content have no hunk and
                         # must be created
                         data = ''
                 if data or mode:
                     if (gp.op in ('ADD', 'RENAME', 'COPY')
                         and backend.exists(gp.path)):
                         raise PatchError(_("cannot create %s: destination "
                                            "already exists") % gp.path)
                     backend.setfile(gp.path, data, mode, gp.oldpath)
                 continue
             try:
                 current_file = patcher(ui, gp, backend, store,
                                        eolmode=eolmode)
             except PatchError, inst:
                 ui.warn(str(inst) + '\n')
                 current_file = None
                 rejects += 1
                 continue
         elif state == 'git':
             for gp in values:
                 path = pstrip(gp.oldpath)
                 data, mode = backend.getfile(path)
                 store.setfile(path, data, mode)
         else:
             raise util.Abort(_('unsupported parser state: %s') % state)
 
     if current_file:
         rejects += current_file.close()
 
     if rejects:
         return -1
     return err
 
 def _externalpatch(ui, repo, patcher, patchname, strip, files,
                    similarity):
     """use <patcher> to apply <patchname> to the working directory.
     returns whether patch was applied with fuzz factor."""
 
     fuzz = False
     args = []
     cwd = repo.root
     if cwd:
         args.append('-d %s' % util.shellquote(cwd))
     fp = util.popen('%s %s -p%d < %s' % (patcher, ' '.join(args), strip,
                                        util.shellquote(patchname)))
     try:
         for line in fp:
             line = line.rstrip()
             ui.note(line + '\n')
             if line.startswith('patching file '):
                 pf = util.parsepatchoutput(line)
                 printed_file = False
                 files.add(pf)
             elif line.find('with fuzz') >= 0:
                 fuzz = True
                 if not printed_file:
                     ui.warn(pf + '\n')
                     printed_file = True
                 ui.warn(line + '\n')
             elif line.find('saving rejects to file') >= 0:
                 ui.warn(line + '\n')
             elif line.find('FAILED') >= 0:
                 if not printed_file:
                     ui.warn(pf + '\n')
                     printed_file = True
                 ui.warn(line + '\n')
     finally:
         if files:
             cfiles = list(files)
             cwd = repo.getcwd()
             if cwd:
                 cfiles = [util.pathto(repo.root, cwd, f)
                           for f in cfiles]
             scmutil.addremove(repo, cfiles, similarity=similarity)
     code = fp.close()
     if code:
         raise PatchError(_("patch command failed: %s") %
                          util.explainexit(code)[0])
     return fuzz
 
 def patchbackend(ui, backend, patchobj, strip, files=None, eolmode='strict'):
     if files is None:
         files = set()
     if eolmode is None:
         eolmode = ui.config('patch', 'eol', 'strict')
     if eolmode.lower() not in eolmodes:
         raise util.Abort(_('unsupported line endings type: %s') % eolmode)
     eolmode = eolmode.lower()
 
     store = filestore()
     try:
         fp = open(patchobj, 'rb')
     except TypeError:
         fp = patchobj
     try:
         ret = applydiff(ui, fp, backend, store, strip=strip,
                         eolmode=eolmode)
     finally:
         if fp != patchobj:
             fp.close()
         files.update(backend.close())
         store.close()
     if ret < 0:
         raise PatchError(_('patch failed to apply'))
     return ret > 0
 
 def internalpatch(ui, repo, patchobj, strip, files=None, eolmode='strict',
                   similarity=0):
     """use builtin patch to apply <patchobj> to the working directory.
     returns whether patch was applied with fuzz factor."""
     backend = workingbackend(ui, repo, similarity)
     return patchbackend(ui, backend, patchobj, strip, files, eolmode)
 
 def patchrepo(ui, repo, ctx, store, patchobj, strip, files=None,
               eolmode='strict'):
     backend = repobackend(ui, repo, ctx, store)
     return patchbackend(ui, backend, patchobj, strip, files, eolmode)
 
 def makememctx(repo, parents, text, user, date, branch, files, store,
                editor=None):
     def getfilectx(repo, memctx, path):
         data, (islink, isexec), copied = store.getfile(path)
         return context.memfilectx(path, data, islink=islink, isexec=isexec,
                                   copied=copied)
     extra = {}
     if branch:
         extra['branch'] = encoding.fromlocal(branch)
     ctx =  context.memctx(repo, parents, text, files, getfilectx, user,
                           date, extra)
     if editor:
         ctx._text = editor(repo, ctx, [])
     return ctx
 
 def patch(ui, repo, patchname, strip=1, files=None, eolmode='strict',
           similarity=0):
     """Apply <patchname> to the working directory.
 
     'eolmode' specifies how end of lines should be handled. It can be:
     - 'strict': inputs are read in binary mode, EOLs are preserved
     - 'crlf': EOLs are ignored when patching and reset to CRLF
     - 'lf': EOLs are ignored when patching and reset to LF
     - None: get it from user settings, default to 'strict'
     'eolmode' is ignored when using an external patcher program.
 
     Returns whether patch was applied with fuzz factor.
     """
     patcher = ui.config('ui', 'patch')
     if files is None:
         files = set()
     try:
         if patcher:
             return _externalpatch(ui, repo, patcher, patchname, strip,
                                   files, similarity)
         return internalpatch(ui, repo, patchname, strip, files, eolmode,
                              similarity)
     except PatchError, err:
         raise util.Abort(str(err))
 
 def changedfiles(ui, repo, patchpath, strip=1):
     backend = fsbackend(ui, repo.root)
     fp = open(patchpath, 'rb')
     try:
         changed = set()
         for state, values in iterhunks(fp):
             if state == 'file':
                 afile, bfile, first_hunk, gp = values
                 if gp:
                     gp.path = pathstrip(gp.path, strip - 1)[1]
                     if gp.oldpath:
                         gp.oldpath = pathstrip(gp.oldpath, strip - 1)[1]
                 else:
                     gp = makepatchmeta(backend, afile, bfile, first_hunk, strip)
                 changed.add(gp.path)
                 if gp.op == 'RENAME':
                     changed.add(gp.oldpath)
             elif state not in ('hunk', 'git'):
                 raise util.Abort(_('unsupported parser state: %s') % state)
         return changed
     finally:
         fp.close()
 
 def b85diff(to, tn):
     '''print base85-encoded binary diff'''
     def gitindex(text):
         if not text:
             return hex(nullid)
         l = len(text)
         s = util.sha1('blob %d\0' % l)
         s.update(text)
         return s.hexdigest()
 
     def fmtline(line):
         l = len(line)
         if l <= 26:
             l = chr(ord('A') + l - 1)
         else:
             l = chr(l - 26 + ord('a') - 1)
         return '%c%s\n' % (l, base85.b85encode(line, True))
 
     def chunk(text, csize=52):
         l = len(text)
         i = 0
         while i < l:
             yield text[i:i + csize]
             i += csize
 
     tohash = gitindex(to)
     tnhash = gitindex(tn)
     if tohash == tnhash:
         return ""
 
     # TODO: deltas
     ret = ['index %s..%s\nGIT binary patch\nliteral %s\n' %
            (tohash, tnhash, len(tn))]
     for l in chunk(zlib.compress(tn)):
         ret.append(fmtline(l))
     ret.append('\n')
     return ''.join(ret)
 
 class GitDiffRequired(Exception):
     pass
 
 def diffopts(ui, opts=None, untrusted=False, section='diff'):
     def get(key, name=None, getter=ui.configbool):
         return ((opts and opts.get(key)) or
                 getter(section, name or key, None, untrusted=untrusted))
     return mdiff.diffopts(
         text=opts and opts.get('text'),
         git=get('git'),
         nodates=get('nodates'),
         showfunc=get('show_function', 'showfunc'),
         ignorews=get('ignore_all_space', 'ignorews'),
         ignorewsamount=get('ignore_space_change', 'ignorewsamount'),
         ignoreblanklines=get('ignore_blank_lines', 'ignoreblanklines'),
         context=get('unified', getter=ui.config))
 
 def diff(repo, node1=None, node2=None, match=None, changes=None, opts=None,
          losedatafn=None, prefix=''):
     '''yields diff of changes to files between two nodes, or node and
     working directory.
 
     if node1 is None, use first dirstate parent instead.
     if node2 is None, compare node1 with working directory.
 
     losedatafn(**kwarg) is a callable run when opts.upgrade=True and
     every time some change cannot be represented with the current
     patch format. Return False to upgrade to git patch format, True to
     accept the loss or raise an exception to abort the diff. It is
     called with the name of current file being diffed as 'fn'. If set
     to None, patches will always be upgraded to git format when
     necessary.
 
     prefix is a filename prefix that is prepended to all filenames on
     display (used for subrepos).
     '''
 
     if opts is None:
         opts = mdiff.defaultopts
 
     if not node1 and not node2:
         node1 = repo.dirstate.p1()
 
     def lrugetfilectx():
         cache = {}
         order = []
         def getfilectx(f, ctx):
             fctx = ctx.filectx(f, filelog=cache.get(f))
             if f not in cache:
                 if len(cache) > 20:
                     del cache[order.pop(0)]
                 cache[f] = fctx.filelog()
             else:
                 order.remove(f)
             order.append(f)
             return fctx
         return getfilectx
     getfilectx = lrugetfilectx()
 
     ctx1 = repo[node1]
     ctx2 = repo[node2]
 
     if not changes:
         changes = repo.status(ctx1, ctx2, match=match)
     modified, added, removed = changes[:3]
 
     if not modified and not added and not removed:
         return []
 
     revs = None
     if not repo.ui.quiet:
         hexfunc = repo.ui.debugflag and hex or short
         revs = [hexfunc(node) for node in [node1, node2] if node]
 
     copy = {}
     if opts.git or opts.upgrade:
         copy = copies.pathcopies(ctx1, ctx2)
 
     difffn = lambda opts, losedata: trydiff(repo, revs, ctx1, ctx2,
                  modified, added, removed, copy, getfilectx, opts, losedata, prefix)
     if opts.upgrade and not opts.git:
         try:
             def losedata(fn):
                 if not losedatafn or not losedatafn(fn=fn):
                     raise GitDiffRequired()
             # Buffer the whole output until we are sure it can be generated
             return list(difffn(opts.copy(git=False), losedata))
         except GitDiffRequired:
             return difffn(opts.copy(git=True), None)
     else:
         return difffn(opts, None)
 
 def difflabel(func, *args, **kw):
     '''yields 2-tuples of (output, label) based on the output of func()'''
     headprefixes = [('diff', 'diff.diffline'),
                     ('copy', 'diff.extended'),
                     ('rename', 'diff.extended'),
                     ('old', 'diff.extended'),
                     ('new', 'diff.extended'),
                     ('deleted', 'diff.extended'),
                     ('---', 'diff.file_a'),
                     ('+++', 'diff.file_b')]
     textprefixes = [('@', 'diff.hunk'),
                     ('-', 'diff.deleted'),
                     ('+', 'diff.inserted')]
     head = False
     for chunk in func(*args, **kw):
         lines = chunk.split('\n')
         for i, line in enumerate(lines):
             if i != 0:
                 yield ('\n', '')
             if head:
                 if line.startswith('@'):
                     head = False
             else:
                 if line and not line[0] in ' +-@\\':
                     head = True
             stripline = line
             if not head and line and line[0] in '+-':
                 # highlight trailing whitespace, but only in changed lines
                 stripline = line.rstrip()
             prefixes = textprefixes
             if head:
                 prefixes = headprefixes
             for prefix, label in prefixes:
                 if stripline.startswith(prefix):
                     yield (stripline, label)
                     break
             else:
                 yield (line, '')
             if line != stripline:
                 yield (line[len(stripline):], 'diff.trailingwhitespace')
 
 def diffui(*args, **kw):
     '''like diff(), but yields 2-tuples of (output, label) for ui.write()'''
     return difflabel(diff, *args, **kw)
 
 
 def _addmodehdr(header, omode, nmode):
     if omode != nmode:
         header.append('old mode %s\n' % omode)
         header.append('new mode %s\n' % nmode)
 
 def trydiff(repo, revs, ctx1, ctx2, modified, added, removed,
             copy, getfilectx, opts, losedatafn, prefix):
 
     def join(f):
         return os.path.join(prefix, f)
 
     date1 = util.datestr(ctx1.date())
     man1 = ctx1.manifest()
 
     gone = set()
     gitmode = {'l': '120000', 'x': '100755', '': '100644'}
 
     copyto = dict([(v, k) for k, v in copy.items()])
 
     if opts.git:
         revs = None
 
     for f in sorted(modified + added + removed):
         to = None
         tn = None
         dodiff = True
         header = []
         if f in man1:
             to = getfilectx(f, ctx1).data()
         if f not in removed:
             tn = getfilectx(f, ctx2).data()
         a, b = f, f
         if opts.git or losedatafn:
             if f in added:
                 mode = gitmode[ctx2.flags(f)]
                 if f in copy or f in copyto:
                     if opts.git:
                         if f in copy:
                             a = copy[f]
                         else:
                             a = copyto[f]
                         omode = gitmode[man1.flags(a)]
                         _addmodehdr(header, omode, mode)
                         if a in removed and a not in gone:
                             op = 'rename'
                             gone.add(a)
                         else:
                             op = 'copy'
                         header.append('%s from %s\n' % (op, join(a)))
                         header.append('%s to %s\n' % (op, join(f)))
                         to = getfilectx(a, ctx1).data()
                     else:
                         losedatafn(f)
                 else:
                     if opts.git:
                         header.append('new file mode %s\n' % mode)
                     elif ctx2.flags(f):
                         losedatafn(f)
                 # In theory, if tn was copied or renamed we should check
                 # if the source is binary too but the copy record already
                 # forces git mode.
                 if util.binary(tn):
                     if opts.git:
                         dodiff = 'binary'
                     else:
                         losedatafn(f)
                 if not opts.git and not tn:
                     # regular diffs cannot represent new empty file
                     losedatafn(f)
             elif f in removed:
                 if opts.git:
                     # have we already reported a copy above?
                     if ((f in copy and copy[f] in added
                          and copyto[copy[f]] == f) or
                         (f in copyto and copyto[f] in added
                          and copy[copyto[f]] == f)):
                         dodiff = False
                     else:
                         header.append('deleted file mode %s\n' %
                                       gitmode[man1.flags(f)])
                 elif not to or util.binary(to):
                     # regular diffs cannot represent empty file deletion
                     losedatafn(f)
             else:
                 oflag = man1.flags(f)
                 nflag = ctx2.flags(f)
                 binary = util.binary(to) or util.binary(tn)
                 if opts.git:
                     _addmodehdr(header, gitmode[oflag], gitmode[nflag])
                     if binary:
                         dodiff = 'binary'
                 elif binary or nflag != oflag:
                     losedatafn(f)
             if opts.git:
                 header.insert(0, mdiff.diffline(revs, join(a), join(b), opts))
 
         if dodiff:
             if dodiff == 'binary':
                 text = b85diff(to, tn)
             else:
                 text = mdiff.unidiff(to, date1,
                                     # ctx2 date may be dynamic
                                     tn, util.datestr(ctx2.date()),
                                     join(a), join(b), revs, opts=opts)
             if header and (text or len(header) > 1):
                 yield ''.join(header)
             if text:
                 yield text
 
 def diffstatsum(stats):
     maxfile, maxtotal, addtotal, removetotal, binary = 0, 0, 0, 0, False
     for f, a, r, b in stats:
         maxfile = max(maxfile, encoding.colwidth(f))
         maxtotal = max(maxtotal, a + r)
         addtotal += a
         removetotal += r
         binary = binary or b
 
     return maxfile, maxtotal, addtotal, removetotal, binary
 
 def diffstatdata(lines):
     diffre = re.compile('^diff .*-r [a-z0-9]+\s(.*)$')
 
     results = []
     filename, adds, removes, isbinary = None, 0, 0, False
 
     def addresult():
         if filename:
             results.append((filename, adds, removes, isbinary))
 
     for line in lines:
         if line.startswith('diff'):
             addresult()
             # set numbers to 0 anyway when starting new file
             adds, removes, isbinary = 0, 0, False
             if line.startswith('diff --git'):
                 filename = gitre.search(line).group(1)
             elif line.startswith('diff -r'):
                 # format: "diff -r ... -r ... filename"
                 filename = diffre.search(line).group(1)
         elif line.startswith('+') and not line.startswith('+++ '):
             adds += 1
         elif line.startswith('-') and not line.startswith('--- '):
             removes += 1
         elif (line.startswith('GIT binary patch') or
               line.startswith('Binary file')):
             isbinary = True
     addresult()
     return results
 
 def diffstat(lines, width=80, git=False):
     output = []
     stats = diffstatdata(lines)
     maxname, maxtotal, totaladds, totalremoves, hasbinary = diffstatsum(stats)
 
     countwidth = len(str(maxtotal))
     if hasbinary and countwidth < 3:
         countwidth = 3
     graphwidth = width - countwidth - maxname - 6
     if graphwidth < 10:
         graphwidth = 10
 
     def scale(i):
         if maxtotal <= graphwidth:
             return i
         # If diffstat runs out of room it doesn't print anything,
         # which isn't very useful, so always print at least one + or -
         # if there were at least some changes.
         return max(i * graphwidth // maxtotal, int(bool(i)))
 
     for filename, adds, removes, isbinary in stats:
         if isbinary:
             count = 'Bin'
         else:
             count = adds + removes
         pluses = '+' * scale(adds)
         minuses = '-' * scale(removes)
         output.append(' %s%s |  %*s %s%s\n' %
                       (filename, ' ' * (maxname - encoding.colwidth(filename)),
                        countwidth, count, pluses, minuses))
 
     if stats:
         output.append(_(' %d files changed, %d insertions(+), %d deletions(-)\n')
                       % (len(stats), totaladds, totalremoves))
 
     return ''.join(output)
 
 def diffstatui(*args, **kw):
     '''like diffstat(), but yields 2-tuples of (output, label) for
     ui.write()
     '''
 
     for line in diffstat(*args, **kw).splitlines():
         if line and line[-1] in '+-':
             name, graph = line.rsplit(' ', 1)
             yield (name + ' ', '')
             m = re.search(r'\++', graph)
             if m:
                 yield (m.group(0), 'diffstat.inserted')
             m = re.search(r'-+', graph)
             if m:
                 yield (m.group(0), 'diffstat.deleted')
         else:
             yield (line, '')
         yield ('\n', '')

tests/test-import-git.t

@@ -1,486 +1,510 b''
   $ "$TESTDIR/hghave" symlink || exit 80
 
   $ hg init
 
 New file:
 
   $ hg import -d "1000000 0" -mnew - <<EOF
   > diff --git a/new b/new
   > new file mode 100644
   > index 0000000..7898192
   > --- /dev/null
   > +++ b/new
   > @@ -0,0 +1 @@
   > +a
   > EOF
   applying patch from stdin
 
   $ hg tip -q
   0:ae3ee40d2079
 
 New empty file:
 
   $ hg import -d "1000000 0" -mempty - <<EOF
   > diff --git a/empty b/empty
   > new file mode 100644
   > EOF
   applying patch from stdin
 
   $ hg tip -q
   1:ab199dc869b5
 
   $ hg locate empty
   empty
 
 chmod +x:
 
   $ hg import -d "1000000 0" -msetx - <<EOF
   > diff --git a/new b/new
   > old mode 100644
   > new mode 100755
   > EOF
   applying patch from stdin
 
   $ hg tip -q
   2:3a34410f282e
 
   $ test -x new
 
 Copy:
 
   $ hg import -d "1000000 0" -mcopy - <<EOF
   > diff --git a/new b/copy
   > old mode 100755
   > new mode 100644
   > similarity index 100%
   > copy from new
   > copy to copy
   > diff --git a/new b/copyx
   > similarity index 100%
   > copy from new
   > copy to copyx
   > EOF
   applying patch from stdin
 
   $ hg tip -q
   3:37bacb7ca14d
 
   $ if "$TESTDIR/hghave" -q execbit; then
   >     test -f copy -a ! -x copy || echo bad
   >     test -x copyx || echo bad
   > else
   >     test -f copy || echo bad
   > fi
 
   $ cat copy
   a
 
   $ hg cat copy
   a
 
 Rename:
 
   $ hg import -d "1000000 0" -mrename - <<EOF
   > diff --git a/copy b/rename
   > similarity index 100%
   > rename from copy
   > rename to rename
   > EOF
   applying patch from stdin
 
   $ hg tip -q
   4:47b81a94361d
 
   $ hg locate
   copyx
   empty
   new
   rename
 
 Delete:
 
   $ hg import -d "1000000 0" -mdelete - <<EOF
   > diff --git a/copyx b/copyx
   > deleted file mode 100755
   > index 7898192..0000000
   > --- a/copyx
   > +++ /dev/null
   > @@ -1 +0,0 @@
   > -a
   > EOF
   applying patch from stdin
 
   $ hg tip -q
   5:d9b001d98336
 
   $ hg locate
   empty
   new
   rename
 
   $ test -f copyx
   [1]
 
 Regular diff:
 
   $ hg import -d "1000000 0" -mregular - <<EOF
   > diff --git a/rename b/rename
   > index 7898192..72e1fe3 100644
   > --- a/rename
   > +++ b/rename
   > @@ -1 +1,5 @@
   >  a
   > +a
   > +a
   > +a
   > +a
   > EOF
   applying patch from stdin
 
   $ hg tip -q
   6:ebe901e7576b
 
 Copy and modify:
 
   $ hg import -d "1000000 0" -mcopymod - <<EOF
   > diff --git a/rename b/copy2
   > similarity index 80%
   > copy from rename
   > copy to copy2
   > index 72e1fe3..b53c148 100644
   > --- a/rename
   > +++ b/copy2
   > @@ -1,5 +1,5 @@
   >  a
   >  a
   > -a
   > +b
   >  a
   >  a
   > EOF
   applying patch from stdin
 
   $ hg tip -q
   7:18f368958ecd
 
   $ hg cat copy2
   a
   a
   b
   a
   a
 
 Rename and modify:
 
   $ hg import -d "1000000 0" -mrenamemod - <<EOF
   > diff --git a/copy2 b/rename2
   > similarity index 80%
   > rename from copy2
   > rename to rename2
   > index b53c148..8f81e29 100644
   > --- a/copy2
   > +++ b/rename2
   > @@ -1,5 +1,5 @@
   >  a
   >  a
   >  b
   > -a
   > +c
   >  a
   > EOF
   applying patch from stdin
 
   $ hg tip -q
   8:c32b0d7e6f44
 
   $ hg locate copy2
   [1]
   $ hg cat rename2
   a
   a
   b
   c
   a
 
 One file renamed multiple times:
 
   $ hg import -d "1000000 0" -mmultirenames - <<EOF
   > diff --git a/rename2 b/rename3
   > rename from rename2
   > rename to rename3
   > diff --git a/rename2 b/rename3-2
   > rename from rename2
   > rename to rename3-2
   > EOF
   applying patch from stdin
 
   $ hg tip -q
   9:034a6bf95330
 
   $ hg log -vr. --template '{rev} {files} / {file_copies}\n'
   9 rename2 rename3 rename3-2 / rename3 (rename2)rename3-2 (rename2)
 
   $ hg locate rename2 rename3 rename3-2
   rename3
   rename3-2
 
   $ hg cat rename3
   a
   a
   b
   c
   a
 
   $ hg cat rename3-2
   a
   a
   b
   c
   a
 
   $ echo foo > foo
   $ hg add foo
   $ hg ci -m 'add foo'
 
 Binary files and regular patch hunks:
 
   $ hg import -d "1000000 0" -m binaryregular - <<EOF
   > diff --git a/binary b/binary
   > new file mode 100644
   > index 0000000000000000000000000000000000000000..593f4708db84ac8fd0f5cc47c634f38c013fe9e4
   > GIT binary patch
   > literal 4
   > Lc\${NkU|;|M00aO5
   > 
   > diff --git a/foo b/foo2
   > rename from foo
   > rename to foo2
   > EOF
   applying patch from stdin
 
   $ hg tip -q
   11:c39bce63e786
 
   $ cat foo2
   foo
 
   $ hg manifest --debug | grep binary
   045c85ba38952325e126c70962cc0f9d9077bc67 644   binary
 
 Multiple binary files:
 
   $ hg import -d "1000000 0" -m multibinary - <<EOF
   > diff --git a/mbinary1 b/mbinary1
   > new file mode 100644
   > index 0000000000000000000000000000000000000000..593f4708db84ac8fd0f5cc47c634f38c013fe9e4
   > GIT binary patch
   > literal 4
   > Lc\${NkU|;|M00aO5
   > 
   > diff --git a/mbinary2 b/mbinary2
   > new file mode 100644
   > index 0000000000000000000000000000000000000000..112363ac1917b417ffbd7f376ca786a1e5fa7490
   > GIT binary patch
   > literal 5
   > Mc\${NkU|\`?^000jF3jhEB
   > 
   > EOF
   applying patch from stdin
 
   $ hg tip -q
   12:30b530085242
 
   $ hg manifest --debug | grep mbinary
   045c85ba38952325e126c70962cc0f9d9077bc67 644   mbinary1
   a874b471193996e7cb034bb301cac7bdaf3e3f46 644   mbinary2
 
 Filenames with spaces:
 
   $ hg import -d "1000000 0" -m spaces - <<EOF
   > diff --git a/foo bar b/foo bar
   > new file mode 100644
   > index 0000000..257cc56
   > --- /dev/null
   > +++ b/foo bar	
   > @@ -0,0 +1 @@
   > +foo
   > EOF
   applying patch from stdin
 
   $ hg tip -q
   13:04750ef42fb3
 
   $ cat "foo bar"
   foo
 
 Copy then modify the original file:
 
   $ hg import -d "1000000 0" -m copy-mod-orig - <<EOF
   > diff --git a/foo2 b/foo2
   > index 257cc56..fe08ec6 100644
   > --- a/foo2
   > +++ b/foo2
   > @@ -1 +1,2 @@
   >  foo
   > +new line
   > diff --git a/foo2 b/foo3
   > similarity index 100%
   > copy from foo2
   > copy to foo3
   > EOF
   applying patch from stdin
 
   $ hg tip -q
   14:c4cd9cdeaa74
 
   $ cat foo3
   foo
 
 Move text file and patch as binary
 
   $ echo a > text2
   $ hg ci -Am0
   adding text2
   $ hg import -d "1000000 0" -m rename-as-binary - <<"EOF"
   > diff --git a/text2 b/binary2
   > rename from text2
   > rename to binary2
   > index 78981922613b2afb6025042ff6bd878ac1994e85..10efcb362e9f3b3420fcfbfc0e37f3dc16e29757
   > GIT binary patch
   > literal 5
   > Mc$`b*O5$Pw00T?_*Z=?k
   > 
   > EOF
   applying patch from stdin
 
   $ cat binary2
   a
   b
   \x00 (no-eol) (esc)
 
   $ hg st --copies --change . 
   A binary2
     text2
   R text2
   $ cd ..
 
 Consecutive import with renames (issue2459)
 
   $ hg init issue2459
   $ cd issue2459
   $ hg import --no-commit --force - <<EOF
   > diff --git a/a b/a
   > new file mode 100644
   > EOF
   applying patch from stdin
   $ hg import --no-commit --force - <<EOF
   > diff --git a/a b/b
   > rename from a
   > rename to b
   > EOF
   applying patch from stdin
   a has not been committed yet, so no copy data will be stored for b.
   $ hg debugstate
   a   0         -1 unset               b
   $ hg ci -m done
   $ cd ..
 
 Renames and strip
 
   $ hg init renameandstrip
   $ cd renameandstrip
   $ echo a > a
   $ hg ci -Am adda
   adding a
   $ hg import --no-commit -p2 - <<EOF
   > diff --git a/foo/a b/foo/b
   > rename from foo/a
   > rename to foo/b
   > EOF
   applying patch from stdin
   $ hg st --copies
   A b
     a
   R a
 
 Renames, similarity and git diff
 
   $ hg revert -aC
   undeleting a
   forgetting b
   $ rm b
   $ hg import --similarity 90 --no-commit - <<EOF
   > diff --git a/a b/b
   > rename from a
   > rename to b
   > EOF
   applying patch from stdin
   $ hg st --copies
   A b
     a
   R a
   $ cd ..
 
 Pure copy with existing destination
 
   $ hg init copytoexisting
   $ cd copytoexisting
   $ echo a > a
   $ echo b > b
   $ hg ci -Am add
   adding a
   adding b
   $ hg import --no-commit - <<EOF
   > diff --git a/a b/b
   > copy from a
   > copy to b
   > EOF
   applying patch from stdin
   abort: cannot create b: destination already exists
   [255]
   $ cat b
   b
 
 Copy and changes with existing destination
 
   $ hg import --no-commit - <<EOF
   > diff --git a/a b/b
   > copy from a
   > copy to b
   > --- a/a
   > +++ b/b
   > @@ -1,1 +1,2 @@
   > a
   > +b
   > EOF
   applying patch from stdin
   cannot create b: destination already exists
   1 out of 1 hunks FAILED -- saving rejects to file b.rej
   abort: patch failed to apply
   [255]
   $ cat b
   b
 
   $ ln -s b linkb
   $ hg add linkb
   $ hg ci -m addlinkb
   $ hg import --no-commit - <<EOF
   > diff --git a/linkb b/linkb
   > deleted file mode 120000
   > --- a/linkb
   > +++ /dev/null
   > @@ -1,1 +0,0 @@
   > -badhunk
   > \ No newline at end of file
   > EOF
   applying patch from stdin
   patching file linkb
   Hunk #1 FAILED at 0
   1 out of 1 hunks FAILED -- saving rejects to file linkb.rej
   abort: patch failed to apply
   [255]
   $ hg st
   ? b.rej
   ? linkb.rej
 
+Test corner case involving copies and multiple hunks (issue3384)
+
+  $ hg revert -qa
+  $ hg import --no-commit - <<EOF
+  > diff --git a/a b/c
+  > copy from a
+  > copy to c
+  > --- a/a
+  > +++ b/c
+  > @@ -1,1 +1,2 @@
+  >  a
+  > +a
+  > @@ -2,1 +2,2 @@
+  >  a
+  > +a
+  > diff --git a/a b/a
+  > --- a/a
+  > +++ b/a
+  > @@ -1,1 +1,2 @@
+  >  a
+  > +b
+  > EOF
+  applying patch from stdin
+
   $ cd ..