eol: cache needs update, also if it has same timestamp as the source

Ignoring same timestamp could (in theory?) cause changes to not be detected.

It might happen quite often that the cache is populated right after .hgeol has
been updated and they thus have the same time stamp second. But we want
correctness, and if it populates the cache so fast, then it can also not be a
big problem to run it again next time when the timestamp has moved on.

hgext/eol.py

@@ -1,468 +1,468
 """automatically manage newlines in repository files
 
 This extension allows you to manage the type of line endings (CRLF or
 LF) that are used in the repository and in the local working
 directory. That way you can get CRLF line endings on Windows and LF on
 Unix/Mac, thereby letting everybody use their OS native line endings.
 
 The extension reads its configuration from a versioned ``.hgeol``
 configuration file found in the root of the working directory. The
 ``.hgeol`` file use the same syntax as all other Mercurial
 configuration files. It uses two sections, ``[patterns]`` and
 ``[repository]``.
 
 The ``[patterns]`` section specifies how line endings should be
 converted between the working directory and the repository. The format is
 specified by a file pattern. The first match is used, so put more
 specific patterns first. The available line endings are ``LF``,
 ``CRLF``, and ``BIN``.
 
 Files with the declared format of ``CRLF`` or ``LF`` are always
 checked out and stored in the repository in that format and files
 declared to be binary (``BIN``) are left unchanged. Additionally,
 ``native`` is an alias for checking out in the platform's default line
 ending: ``LF`` on Unix (including Mac OS X) and ``CRLF`` on
 Windows. Note that ``BIN`` (do nothing to line endings) is Mercurial's
 default behavior; it is only needed if you need to override a later,
 more general pattern.
 
 The optional ``[repository]`` section specifies the line endings to
 use for files stored in the repository. It has a single setting,
 ``native``, which determines the storage line endings for files
 declared as ``native`` in the ``[patterns]`` section. It can be set to
 ``LF`` or ``CRLF``. The default is ``LF``. For example, this means
 that on Windows, files configured as ``native`` (``CRLF`` by default)
 will be converted to ``LF`` when stored in the repository. Files
 declared as ``LF``, ``CRLF``, or ``BIN`` in the ``[patterns]`` section
 are always stored as-is in the repository.
 
 Example versioned ``.hgeol`` file::
 
   [patterns]
   **.py = native
   **.vcproj = CRLF
   **.txt = native
   Makefile = LF
   **.jpg = BIN
 
   [repository]
   native = LF
 
 .. note::
 
    The rules will first apply when files are touched in the working
    directory, e.g. by updating to null and back to tip to touch all files.
 
 The extension uses an optional ``[eol]`` section read from both the
 normal Mercurial configuration files and the ``.hgeol`` file, with the
 latter overriding the former. You can use that section to control the
 overall behavior. There are three settings:
 
 - ``eol.native`` (default ``os.linesep``) can be set to ``LF`` or
   ``CRLF`` to override the default interpretation of ``native`` for
   checkout. This can be used with :hg:`archive` on Unix, say, to
   generate an archive where files have line endings for Windows.
 
 - ``eol.only-consistent`` (default True) can be set to False to make
   the extension convert files with inconsistent EOLs. Inconsistent
   means that there is both ``CRLF`` and ``LF`` present in the file.
   Such files are normally not touched under the assumption that they
   have mixed EOLs on purpose.
 
 - ``eol.fix-trailing-newline`` (default False) can be set to True to
   ensure that converted files end with a EOL character (either ``\\n``
   or ``\\r\\n`` as per the configured patterns).
 
 The extension provides ``cleverencode:`` and ``cleverdecode:`` filters
 like the deprecated win32text extension does. This means that you can
 disable win32text and enable eol and your filters will still work. You
 only need to these filters until you have prepared a ``.hgeol`` file.
 
 The ``win32text.forbid*`` hooks provided by the win32text extension
 have been unified into a single hook named ``eol.checkheadshook``. The
 hook will lookup the expected line endings from the ``.hgeol`` file,
 which means you must migrate to a ``.hgeol`` file first before using
 the hook. ``eol.checkheadshook`` only checks heads, intermediate
 invalid revisions will be pushed. To forbid them completely, use the
 ``eol.checkallhook`` hook. These hooks are best used as
 ``pretxnchangegroup`` hooks.
 
 See :hg:`help patterns` for more information about the glob patterns
 used.
 """
 
 from __future__ import absolute_import
 
 import os
 import re
 from mercurial.i18n import _
 from mercurial import (
     config,
     error as errormod,
     extensions,
     match,
     pycompat,
     registrar,
     scmutil,
     util,
 )
 from mercurial.utils import stringutil
 
 # Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for
 # extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
 # be specifying the version(s) of Mercurial they are tested with, or
 # leave the attribute unspecified.
 testedwith = b'ships-with-hg-core'
 
 configtable = {}
 configitem = registrar.configitem(configtable)
 
 configitem(
     b'eol', b'fix-trailing-newline', default=False,
 )
 configitem(
     b'eol', b'native', default=pycompat.oslinesep,
 )
 configitem(
     b'eol', b'only-consistent', default=True,
 )
 
 # Matches a lone LF, i.e., one that is not part of CRLF.
 singlelf = re.compile(b'(^|[^\r])\n')
 
 
 def inconsistenteol(data):
     return b'\r\n' in data and singlelf.search(data)
 
 
 def tolf(s, params, ui, **kwargs):
     """Filter to convert to LF EOLs."""
     if stringutil.binary(s):
         return s
     if ui.configbool(b'eol', b'only-consistent') and inconsistenteol(s):
         return s
     if (
         ui.configbool(b'eol', b'fix-trailing-newline')
         and s
         and not s.endswith(b'\n')
     ):
         s = s + b'\n'
     return util.tolf(s)
 
 
 def tocrlf(s, params, ui, **kwargs):
     """Filter to convert to CRLF EOLs."""
     if stringutil.binary(s):
         return s
     if ui.configbool(b'eol', b'only-consistent') and inconsistenteol(s):
         return s
     if (
         ui.configbool(b'eol', b'fix-trailing-newline')
         and s
         and not s.endswith(b'\n')
     ):
         s = s + b'\n'
     return util.tocrlf(s)
 
 
 def isbinary(s, params, ui, **kwargs):
     """Filter to do nothing with the file."""
     return s
 
 
 filters = {
     b'to-lf': tolf,
     b'to-crlf': tocrlf,
     b'is-binary': isbinary,
     # The following provide backwards compatibility with win32text
     b'cleverencode:': tolf,
     b'cleverdecode:': tocrlf,
 }
 
 
 class eolfile(object):
     def __init__(self, ui, root, data):
         self._decode = {
             b'LF': b'to-lf',
             b'CRLF': b'to-crlf',
             b'BIN': b'is-binary',
         }
         self._encode = {
             b'LF': b'to-lf',
             b'CRLF': b'to-crlf',
             b'BIN': b'is-binary',
         }
 
         self.cfg = config.config()
         # Our files should not be touched. The pattern must be
         # inserted first override a '** = native' pattern.
         self.cfg.set(b'patterns', b'.hg*', b'BIN', b'eol')
         # We can then parse the user's patterns.
         self.cfg.parse(b'.hgeol', data)
 
         isrepolf = self.cfg.get(b'repository', b'native') != b'CRLF'
         self._encode[b'NATIVE'] = isrepolf and b'to-lf' or b'to-crlf'
         iswdlf = ui.config(b'eol', b'native') in (b'LF', b'\n')
         self._decode[b'NATIVE'] = iswdlf and b'to-lf' or b'to-crlf'
 
         include = []
         exclude = []
         self.patterns = []
         for pattern, style in self.cfg.items(b'patterns'):
             key = style.upper()
             if key == b'BIN':
                 exclude.append(pattern)
             else:
                 include.append(pattern)
             m = match.match(root, b'', [pattern])
             self.patterns.append((pattern, key, m))
         # This will match the files for which we need to care
         # about inconsistent newlines.
         self.match = match.match(root, b'', [], include, exclude)
 
     def copytoui(self, ui):
         for pattern, key, m in self.patterns:
             try:
                 ui.setconfig(b'decode', pattern, self._decode[key], b'eol')
                 ui.setconfig(b'encode', pattern, self._encode[key], b'eol')
             except KeyError:
                 ui.warn(
                     _(b"ignoring unknown EOL style '%s' from %s\n")
                     % (key, self.cfg.source(b'patterns', pattern))
                 )
         # eol.only-consistent can be specified in ~/.hgrc or .hgeol
         for k, v in self.cfg.items(b'eol'):
             ui.setconfig(b'eol', k, v, b'eol')
 
     def checkrev(self, repo, ctx, files):
         failed = []
         for f in files or ctx.files():
             if f not in ctx:
                 continue
             for pattern, key, m in self.patterns:
                 if not m(f):
                     continue
                 target = self._encode[key]
                 data = ctx[f].data()
                 if (
                     target == b"to-lf"
                     and b"\r\n" in data
                     or target == b"to-crlf"
                     and singlelf.search(data)
                 ):
                     failed.append((f, target, bytes(ctx)))
                 break
         return failed
 
 
 def parseeol(ui, repo, nodes):
     try:
         for node in nodes:
             try:
                 if node is None:
                     # Cannot use workingctx.data() since it would load
                     # and cache the filters before we configure them.
                     data = repo.wvfs(b'.hgeol').read()
                 else:
                     data = repo[node][b'.hgeol'].data()
                 return eolfile(ui, repo.root, data)
             except (IOError, LookupError):
                 pass
     except errormod.ParseError as inst:
         ui.warn(
             _(
                 b"warning: ignoring .hgeol file due to parse error "
                 b"at %s: %s\n"
             )
             % (inst.args[1], inst.args[0])
         )
     return None
 
 
 def ensureenabled(ui):
     """make sure the extension is enabled when used as hook
 
     When eol is used through hooks, the extension is never formally loaded and
     enabled. This has some side effect, for example the config declaration is
     never loaded. This function ensure the extension is enabled when running
     hooks.
     """
     if b'eol' in ui._knownconfig:
         return
     ui.setconfig(b'extensions', b'eol', b'', source=b'internal')
     extensions.loadall(ui, [b'eol'])
 
 
 def _checkhook(ui, repo, node, headsonly):
     # Get revisions to check and touched files at the same time
     ensureenabled(ui)
     files = set()
     revs = set()
     for rev in pycompat.xrange(repo[node].rev(), len(repo)):
         revs.add(rev)
         if headsonly:
             ctx = repo[rev]
             files.update(ctx.files())
             for pctx in ctx.parents():
                 revs.discard(pctx.rev())
     failed = []
     for rev in revs:
         ctx = repo[rev]
         eol = parseeol(ui, repo, [ctx.node()])
         if eol:
             failed.extend(eol.checkrev(repo, ctx, files))
 
     if failed:
         eols = {b'to-lf': b'CRLF', b'to-crlf': b'LF'}
         msgs = []
         for f, target, node in sorted(failed):
             msgs.append(
                 _(b"  %s in %s should not have %s line endings")
                 % (f, node, eols[target])
             )
         raise errormod.Abort(
             _(b"end-of-line check failed:\n") + b"\n".join(msgs)
         )
 
 
 def checkallhook(ui, repo, node, hooktype, **kwargs):
     """verify that files have expected EOLs"""
     _checkhook(ui, repo, node, False)
 
 
 def checkheadshook(ui, repo, node, hooktype, **kwargs):
     """verify that files have expected EOLs"""
     _checkhook(ui, repo, node, True)
 
 
 # "checkheadshook" used to be called "hook"
 hook = checkheadshook
 
 
 def preupdate(ui, repo, hooktype, parent1, parent2):
     p1node = scmutil.resolvehexnodeidprefix(repo, parent1)
     repo.loadeol([p1node])
     return False
 
 
 def uisetup(ui):
     ui.setconfig(b'hooks', b'preupdate.eol', preupdate, b'eol')
 
 
 def extsetup(ui):
     try:
         extensions.find(b'win32text')
         ui.warn(
             _(
                 b"the eol extension is incompatible with the "
                 b"win32text extension\n"
             )
         )
     except KeyError:
         pass
 
 
 def reposetup(ui, repo):
     uisetup(repo.ui)
 
     if not repo.local():
         return
     for name, fn in pycompat.iteritems(filters):
         repo.adddatafilter(name, fn)
 
     ui.setconfig(b'patch', b'eol', b'auto', b'eol')
 
     class eolrepo(repo.__class__):
         def loadeol(self, nodes):
             eol = parseeol(self.ui, self, nodes)
             if eol is None:
                 return None
             eol.copytoui(self.ui)
             return eol.match
 
         def _hgcleardirstate(self):
             self._eolmatch = self.loadeol([None, b'tip'])
             if not self._eolmatch:
                 self._eolmatch = util.never
                 return
 
             oldeol = None
             try:
                 cachemtime = os.path.getmtime(self.vfs.join(b"eol.cache"))
             except OSError:
                 cachemtime = 0
             else:
                 olddata = self.vfs.read(b"eol.cache")
                 if olddata:
                     oldeol = eolfile(self.ui, self.root, olddata)
 
             try:
                 eolmtime = os.path.getmtime(self.wjoin(b".hgeol"))
             except OSError:
                 eolmtime = 0
 
-            if eolmtime > cachemtime:
+            if eolmtime >= cachemtime and eolmtime > 0:
                 self.ui.debug(b"eol: detected change in .hgeol\n")
 
                 hgeoldata = self.wvfs.read(b'.hgeol')
                 neweol = eolfile(self.ui, self.root, hgeoldata)
 
                 wlock = None
                 try:
                     wlock = self.wlock()
                     for f in self.dirstate:
                         if self.dirstate[f] != b'n':
                             continue
                         if oldeol is not None:
                             if not oldeol.match(f) and not neweol.match(f):
                                 continue
                             oldkey = None
                             for pattern, key, m in oldeol.patterns:
                                 if m(f):
                                     oldkey = key
                                     break
                             newkey = None
                             for pattern, key, m in neweol.patterns:
                                 if m(f):
                                     newkey = key
                                     break
                             if oldkey == newkey:
                                 continue
                         # all normal files need to be looked at again since
                         # the new .hgeol file specify a different filter
                         self.dirstate.normallookup(f)
                     # Write the cache to update mtime and cache .hgeol
                     with self.vfs(b"eol.cache", b"w") as f:
                         f.write(hgeoldata)
                 except errormod.LockUnavailable:
                     # If we cannot lock the repository and clear the
                     # dirstate, then a commit might not see all files
                     # as modified. But if we cannot lock the
                     # repository, then we can also not make a commit,
                     # so ignore the error.
                     pass
                 finally:
                     if wlock is not None:
                         wlock.release()
 
         def commitctx(self, ctx, error=False, origctx=None):
             for f in sorted(ctx.added() + ctx.modified()):
                 if not self._eolmatch(f):
                     continue
                 fctx = ctx[f]
                 if fctx is None:
                     continue
                 data = fctx.data()
                 if stringutil.binary(data):
                     # We should not abort here, since the user should
                     # be able to say "** = native" to automatically
                     # have all non-binary files taken care of.
                     continue
                 if inconsistenteol(data):
                     raise errormod.Abort(
                         _(b"inconsistent newline style in %s\n") % f
                     )
             return super(eolrepo, self).commitctx(ctx, error, origctx)
 
     repo.__class__ = eolrepo
     repo._hgcleardirstate()