##// END OF EJS Templates
phabricator: warn if unable to amend, instead of aborting after posting...
phabricator: warn if unable to amend, instead of aborting after posting There was a divergence in behavior here between obsolete and strip based amending. I first noticed the abort when testing outside of the test harness, but then had trouble recreating it here after reverting the code changes. It turns out, strip based amend was successfully amending the public commit after it was posted! It looks like the protection is in the `commit --amend` command, not in the underlying code that it calls. I considered doing a preflight check and aborting. But the locks are only acquired at the end, if amending, and this is too large a section of code to be wrapped in a maybe-it's-held-or-not context manager for my tastes. Additionally, some people do post-push reviews, and amending is the default behavior, so they shouldn't see a misleading error message. The lack of a 'Differential Revision' entry in the commit message breaks a {phabreview} test, so it had to be partially conditionalized.

File last commit:

r31916:4a4fa665 default
r41198:0101a35d default
Show More
test-exchange-obsmarkers-case-B4.t
163 lines | 5.0 KiB | text/troff | Tads3Lexer
/ tests / test-exchange-obsmarkers-case-B4.t
============================================
Testing obsolescence markers push: Cases B.4
============================================
Mercurial pushes obsolescences markers relevant to the "pushed-set", the set of
all changesets that requested to be "in sync" after the push (even if they are
already on both side).
This test belongs to a series of tests checking such set is properly computed
and applied. This does not tests "obsmarkers" discovery capabilities.
Category B: pruning case
TestCase 4: Pruned changeset on common part of the history
Variants:
# a: explicite push
# b: bare push
B.4 Pruned changeset on common part of history
=============================================
.. {{{
.. C
.. | B
.. | |
.. | A
.. |/
.. O
.. }}}
..
.. Marker exist from:
..
.. * C (prune)
..
.. Command run:
..
.. * hg push -r B
.. * hg push
..
.. Expected exchange:
..
.. * prune for C
Setup
-----
$ . $TESTDIR/testlib/exchange-obsmarker-util.sh
initial
$ setuprepos B.4
creating test repo for test case B.4
- pulldest
- main
- pushdest
cd into `main` and proceed with env setup
$ cd main
$ mkcommit A
$ mkcommit B
$ hg phase --public .
$ hg push ../pushdest
pushing to ../pushdest
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 2 changesets with 2 changes to 2 files
$ hg push ../pulldest
pushing to ../pulldest
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 2 changesets with 2 changes to 2 files
$ hg update -q 0
$ mkcommit C
created new head
$ hg prune -qd '0 0' .
$ hg log -G --hidden
x 7f7f229b13a6 (draft): C
|
| o f6fbb35d8ac9 (public): B
| |
| o f5bc6836db60 (public): A
|/
@ a9bdc8b26820 (public): O
$ inspect_obsmarkers
obsstore content
================
7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
$ cd ..
$ cd ..
$ cp -R B.4 B.4.a
$ cp -R B.4 B.4.b
Actual Test (explicit push version)
-----------------------------------
$ dotest B.4.a O
## Running testcase B.4.a
# testing echange of "O" (a9bdc8b26820)
## initial state
# obstore: main
7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
# obstore: pulldest
## pushing "O" from main to pushdest
pushing to pushdest
searching for changes
no changes found
remote: 1 new obsolescence markers
## post push state
# obstore: main
7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
## pulling "a9bdc8b26820" from main into pulldest
pulling from main
no changes found
1 new obsolescence markers
## post pull state
# obstore: main
7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
Actual Test (bare push version)
-----------------------------------
$ dotest B.4.b
## Running testcase B.4.b
## initial state
# obstore: main
7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
# obstore: pulldest
## pushing from main to pushdest
pushing to pushdest
searching for changes
no changes found
remote: 1 new obsolescence markers
## post push state
# obstore: main
7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
## pulling from main into pulldest
pulling from main
searching for changes
no changes found
1 new obsolescence markers
## post pull state
# obstore: main
7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}