##// END OF EJS Templates
add: add back forgotten files even when not matching exactly (BC)...
add: add back forgotten files even when not matching exactly (BC) I accidentally did 'hg forget .' and tried to undo the operation with 'hg add .'. I expected the files to be reported as either modified or clean, but they were still reported as removed. It turns out that forgotten files are only added back if they are listed explicitly, as shown by the following two invocations. This makes it hard to recover from the mistake of forgetting a lot of files. $ hg forget README && hg add README && hg status -A README C README $ hg forget README && hg add . && hg status -A README R README The problem lies in cmdutil.add(). That method checks that the file isn't already tracked before adding it, but it does so by checking the dirstate, which does have an entry for forgotten files (state 'r'). We should instead be checking whether the file exists in the workingctx. The workingctx is also what we later call add() on, and that method takes care of transforming the add() into a normallookup() on the dirstate. Since we're changing repo.dirstate into wctx, let's also change repo.walk into wctx.walk for consistency (repo.walk calls wctx.walk, so we're simply inlining the call).

File last commit:

r18967:88d1b59f default
r23258:10697f29 default
Show More
archival.py
313 lines | 10.2 KiB | text/x-python | PythonLexer
# archival.py - revision archival for mercurial
#
# Copyright 2006 Vadim Gelfer <vadim.gelfer@gmail.com>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
from i18n import _
from node import hex
import match as matchmod
import cmdutil
import scmutil, util, encoding
import cStringIO, os, tarfile, time, zipfile
import zlib, gzip
import struct
import error
# from unzip source code:
_UNX_IFREG = 0x8000
_UNX_IFLNK = 0xa000
def tidyprefix(dest, kind, prefix):
'''choose prefix to use for names in archive. make sure prefix is
safe for consumers.'''
if prefix:
prefix = util.normpath(prefix)
else:
if not isinstance(dest, str):
raise ValueError('dest must be string if no prefix')
prefix = os.path.basename(dest)
lower = prefix.lower()
for sfx in exts.get(kind, []):
if lower.endswith(sfx):
prefix = prefix[:-len(sfx)]
break
lpfx = os.path.normpath(util.localpath(prefix))
prefix = util.pconvert(lpfx)
if not prefix.endswith('/'):
prefix += '/'
if prefix.startswith('../') or os.path.isabs(lpfx) or '/../' in prefix:
raise util.Abort(_('archive prefix contains illegal components'))
return prefix
exts = {
'tar': ['.tar'],
'tbz2': ['.tbz2', '.tar.bz2'],
'tgz': ['.tgz', '.tar.gz'],
'zip': ['.zip'],
}
def guesskind(dest):
for kind, extensions in exts.iteritems():
if util.any(dest.endswith(ext) for ext in extensions):
return kind
return None
class tarit(object):
'''write archive to tar file or stream. can write uncompressed,
or compress with gzip or bzip2.'''
class GzipFileWithTime(gzip.GzipFile):
def __init__(self, *args, **kw):
timestamp = None
if 'timestamp' in kw:
timestamp = kw.pop('timestamp')
if timestamp is None:
self.timestamp = time.time()
else:
self.timestamp = timestamp
gzip.GzipFile.__init__(self, *args, **kw)
def _write_gzip_header(self):
self.fileobj.write('\037\213') # magic header
self.fileobj.write('\010') # compression method
# Python 2.6 introduced self.name and deprecated self.filename
try:
fname = self.name
except AttributeError:
fname = self.filename
if fname and fname.endswith('.gz'):
fname = fname[:-3]
flags = 0
if fname:
flags = gzip.FNAME
self.fileobj.write(chr(flags))
gzip.write32u(self.fileobj, long(self.timestamp))
self.fileobj.write('\002')
self.fileobj.write('\377')
if fname:
self.fileobj.write(fname + '\000')
def __init__(self, dest, mtime, kind=''):
self.mtime = mtime
self.fileobj = None
def taropen(name, mode, fileobj=None):
if kind == 'gz':
mode = mode[0]
if not fileobj:
fileobj = open(name, mode + 'b')
gzfileobj = self.GzipFileWithTime(name, mode + 'b',
zlib.Z_BEST_COMPRESSION,
fileobj, timestamp=mtime)
self.fileobj = gzfileobj
return tarfile.TarFile.taropen(name, mode, gzfileobj)
else:
return tarfile.open(name, mode + kind, fileobj)
if isinstance(dest, str):
self.z = taropen(dest, mode='w:')
else:
# Python 2.5-2.5.1 have a regression that requires a name arg
self.z = taropen(name='', mode='w|', fileobj=dest)
def addfile(self, name, mode, islink, data):
i = tarfile.TarInfo(name)
i.mtime = self.mtime
i.size = len(data)
if islink:
i.type = tarfile.SYMTYPE
i.mode = 0777
i.linkname = data
data = None
i.size = 0
else:
i.mode = mode
data = cStringIO.StringIO(data)
self.z.addfile(i, data)
def done(self):
self.z.close()
if self.fileobj:
self.fileobj.close()
class tellable(object):
'''provide tell method for zipfile.ZipFile when writing to http
response file object.'''
def __init__(self, fp):
self.fp = fp
self.offset = 0
def __getattr__(self, key):
return getattr(self.fp, key)
def write(self, s):
self.fp.write(s)
self.offset += len(s)
def tell(self):
return self.offset
class zipit(object):
'''write archive to zip file or stream. can write uncompressed,
or compressed with deflate.'''
def __init__(self, dest, mtime, compress=True):
if not isinstance(dest, str):
try:
dest.tell()
except (AttributeError, IOError):
dest = tellable(dest)
self.z = zipfile.ZipFile(dest, 'w',
compress and zipfile.ZIP_DEFLATED or
zipfile.ZIP_STORED)
# Python's zipfile module emits deprecation warnings if we try
# to store files with a date before 1980.
epoch = 315532800 # calendar.timegm((1980, 1, 1, 0, 0, 0, 1, 1, 0))
if mtime < epoch:
mtime = epoch
self.mtime = mtime
self.date_time = time.gmtime(mtime)[:6]
def addfile(self, name, mode, islink, data):
i = zipfile.ZipInfo(name, self.date_time)
i.compress_type = self.z.compression
# unzip will not honor unix file modes unless file creator is
# set to unix (id 3).
i.create_system = 3
ftype = _UNX_IFREG
if islink:
mode = 0777
ftype = _UNX_IFLNK
i.external_attr = (mode | ftype) << 16L
# add "extended-timestamp" extra block, because zip archives
# without this will be extracted with unexpected timestamp,
# if TZ is not configured as GMT
i.extra += struct.pack('<hhBl',
0x5455, # block type: "extended-timestamp"
1 + 4, # size of this block
1, # "modification time is present"
int(self.mtime)) # last modification (UTC)
self.z.writestr(i, data)
def done(self):
self.z.close()
class fileit(object):
'''write archive as files in directory.'''
def __init__(self, name, mtime):
self.basedir = name
self.opener = scmutil.opener(self.basedir)
def addfile(self, name, mode, islink, data):
if islink:
self.opener.symlink(data, name)
return
f = self.opener(name, "w", atomictemp=True)
f.write(data)
f.close()
destfile = os.path.join(self.basedir, name)
os.chmod(destfile, mode)
def done(self):
pass
archivers = {
'files': fileit,
'tar': tarit,
'tbz2': lambda name, mtime: tarit(name, mtime, 'bz2'),
'tgz': lambda name, mtime: tarit(name, mtime, 'gz'),
'uzip': lambda name, mtime: zipit(name, mtime, False),
'zip': zipit,
}
def archive(repo, dest, node, kind, decode=True, matchfn=None,
prefix=None, mtime=None, subrepos=False):
'''create archive of repo as it was at node.
dest can be name of directory, name of archive file, or file
object to write archive to.
kind is type of archive to create.
decode tells whether to put files through decode filters from
hgrc.
matchfn is function to filter names of files to write to archive.
prefix is name of path to put before every archive member.'''
if kind == 'files':
if prefix:
raise util.Abort(_('cannot give prefix when archiving to files'))
else:
prefix = tidyprefix(dest, kind, prefix)
def write(name, mode, islink, getdata):
data = getdata()
if decode:
data = repo.wwritedata(name, data)
archiver.addfile(prefix + name, mode, islink, data)
if kind not in archivers:
raise util.Abort(_("unknown archive type '%s'") % kind)
ctx = repo[node]
archiver = archivers[kind](dest, mtime or ctx.date()[0])
if repo.ui.configbool("ui", "archivemeta", True):
def metadata():
base = 'repo: %s\nnode: %s\nbranch: %s\n' % (
repo[0].hex(), hex(node), encoding.fromlocal(ctx.branch()))
tags = ''.join('tag: %s\n' % t for t in ctx.tags()
if repo.tagtype(t) == 'global')
if not tags:
repo.ui.pushbuffer()
opts = {'template': '{latesttag}\n{latesttagdistance}',
'style': '', 'patch': None, 'git': None}
cmdutil.show_changeset(repo.ui, repo, opts).show(ctx)
ltags, dist = repo.ui.popbuffer().split('\n')
tags = ''.join('latesttag: %s\n' % t for t in ltags.split(':'))
tags += 'latesttagdistance: %s\n' % dist
return base + tags
name = '.hg_archival.txt'
if not matchfn or matchfn(name):
write(name, 0644, False, metadata)
if matchfn:
files = [f for f in ctx.manifest().keys() if matchfn(f)]
else:
files = ctx.manifest().keys()
total = len(files)
if total:
files.sort()
repo.ui.progress(_('archiving'), 0, unit=_('files'), total=total)
for i, f in enumerate(files):
ff = ctx.flags(f)
write(f, 'x' in ff and 0755 or 0644, 'l' in ff, ctx[f].data)
repo.ui.progress(_('archiving'), i + 1, item=f,
unit=_('files'), total=total)
repo.ui.progress(_('archiving'), None)
if subrepos:
for subpath in sorted(ctx.substate):
sub = ctx.sub(subpath)
submatch = matchmod.narrowmatcher(subpath, matchfn)
total += sub.archive(repo.ui, archiver, prefix, submatch)
if total == 0:
raise error.Abort(_('no files match the archive pattern'))
archiver.done()
return total