##// END OF EJS Templates
compression: introduce a `storage.revlog.zlib.level` configuration...
compression: introduce a `storage.revlog.zlib.level` configuration This option control the zlib compression level used when compression revlog chunk. This is also a good excuse to pave the way for a similar configuration option for the zstd compression engine. Having a dedicated option for each compression algorithm is useful because they don't support the same range of values. Using a higher zlib compression impact CPU consumption at compression time, but does not directly affected decompression time. However dealing with small compressed chunk can directly help decompression and indirectly help other revlog logic. I ran some basic test on repositories using different level. I am using the mercurial, pypy, netbeans and mozilla-central clone from our benchmark suite. All tested repository use sparse-revlog and got all their delta recomputed. The different compression level has a small effect on the repository size (about 10% variation in the total range). My quick analysis is that revlog mostly store small delta, that are not affected by the compression level much. So the variation probably mostly comes from better compression of the snapshots revisions, and snapshot revision only represent a small portion of the repository content. I also made some basic timings measurements. The "read" timings are gathered using simple run of `hg perfrevlogrevisions`, the "write" timings using `hg perfrevlogwrite` (restricted to the last 5000 revisions for netbeans and mozilla central). The timings are gathered on a generic machine, (not one of our performance locked machine), so small variation might not be meaningful. However large trend remains relevant. Keep in mind that these numbers are not pure compression/decompression time. They also involve the full revlog logic. In particular the difference in chunk size has an impact on the delta chain structure, affecting performance when writing or reading them. On read/write performance, the compression level has a bigger impact. Counter-intuitively, the higher compression levels improve "write" performance for the large repositories in our tested setting. Maybe because the last 5000 delta chain end up having a very different shape in this specific spot? Or maybe because of a more general trend of better delta chains thanks to the smaller chunk and snapshot. This series does not intend to change the default compression level. However, these result call for a deeper analysis of this performance difference in the future. Full data ========= repo level .hg/store size 00manifest.d read write ---------------------------------------------------------------- mercurial 1 49,402,813 5,963,475 0.170159 53.250304 mercurial 6 47,197,397 5,875,730 0.182820 56.264320 mercurial 9 47,121,596 5,849,781 0.189219 56.293612 pypy 1 370,830,572 28,462,425 2.679217 460.721984 pypy 6 340,112,317 27,648,747 2.768691 467.537158 pypy 9 338,360,736 27,639,003 2.763495 476.589918 netbeans 1 1,281,847,810 165,495,457 122.477027 520.560316 netbeans 6 1,205,284,353 159,161,207 139.876147 715.930400 netbeans 9 1,197,135,671 155,034,586 141.620281 678.297064 mozilla 1 2,775,497,186 298,527,987 147.867662 751.263721 mozilla 6 2,596,856,420 286,597,671 170.572118 987.056093 mozilla 9 2,587,542,494 287,018,264 163.622338 739.803002

File last commit:

r38806:e7aa113b default
r42210:1fac9b93 default
Show More
win32text.py
195 lines | 6.2 KiB | text/x-python | PythonLexer
# win32text.py - LF <-> CRLF/CR translation utilities for Windows/Mac users
#
# Copyright 2005, 2007-2009 Matt Mackall <mpm@selenic.com> and others
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
'''perform automatic newline conversion (DEPRECATED)
Deprecation: The win32text extension requires each user to configure
the extension again and again for each clone since the configuration
is not copied when cloning.
We have therefore made the ``eol`` as an alternative. The ``eol``
uses a version controlled file for its configuration and each clone
will therefore use the right settings from the start.
To perform automatic newline conversion, use::
[extensions]
win32text =
[encode]
** = cleverencode:
# or ** = macencode:
[decode]
** = cleverdecode:
# or ** = macdecode:
If not doing conversion, to make sure you do not commit CRLF/CR by accident::
[hooks]
pretxncommit.crlf = python:hgext.win32text.forbidcrlf
# or pretxncommit.cr = python:hgext.win32text.forbidcr
To do the same check on a server to prevent CRLF/CR from being
pushed or pulled::
[hooks]
pretxnchangegroup.crlf = python:hgext.win32text.forbidcrlf
# or pretxnchangegroup.cr = python:hgext.win32text.forbidcr
'''
from __future__ import absolute_import
import re
from mercurial.i18n import _
from mercurial.node import (
short,
)
from mercurial import (
pycompat,
registrar,
)
from mercurial.utils import (
stringutil,
)
# Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = 'ships-with-hg-core'
configtable = {}
configitem = registrar.configitem(configtable)
configitem('win32text', 'warn',
default=True,
)
# regexp for single LF without CR preceding.
re_single_lf = re.compile('(^|[^\r])\n', re.MULTILINE)
newlinestr = {'\r\n': 'CRLF', '\r': 'CR'}
filterstr = {'\r\n': 'clever', '\r': 'mac'}
def checknewline(s, newline, ui=None, repo=None, filename=None):
# warn if already has 'newline' in repository.
# it might cause unexpected eol conversion.
# see issue 302:
# https://bz.mercurial-scm.org/302
if newline in s and ui and filename and repo:
ui.warn(_('WARNING: %s already has %s line endings\n'
'and does not need EOL conversion by the win32text plugin.\n'
'Before your next commit, please reconsider your '
'encode/decode settings in \nMercurial.ini or %s.\n') %
(filename, newlinestr[newline], repo.vfs.join('hgrc')))
def dumbdecode(s, cmd, **kwargs):
checknewline(s, '\r\n', **kwargs)
# replace single LF to CRLF
return re_single_lf.sub('\\1\r\n', s)
def dumbencode(s, cmd):
return s.replace('\r\n', '\n')
def macdumbdecode(s, cmd, **kwargs):
checknewline(s, '\r', **kwargs)
return s.replace('\n', '\r')
def macdumbencode(s, cmd):
return s.replace('\r', '\n')
def cleverdecode(s, cmd, **kwargs):
if not stringutil.binary(s):
return dumbdecode(s, cmd, **kwargs)
return s
def cleverencode(s, cmd):
if not stringutil.binary(s):
return dumbencode(s, cmd)
return s
def macdecode(s, cmd, **kwargs):
if not stringutil.binary(s):
return macdumbdecode(s, cmd, **kwargs)
return s
def macencode(s, cmd):
if not stringutil.binary(s):
return macdumbencode(s, cmd)
return s
_filters = {
'dumbdecode:': dumbdecode,
'dumbencode:': dumbencode,
'cleverdecode:': cleverdecode,
'cleverencode:': cleverencode,
'macdumbdecode:': macdumbdecode,
'macdumbencode:': macdumbencode,
'macdecode:': macdecode,
'macencode:': macencode,
}
def forbidnewline(ui, repo, hooktype, node, newline, **kwargs):
halt = False
seen = set()
# we try to walk changesets in reverse order from newest to
# oldest, so that if we see a file multiple times, we take the
# newest version as canonical. this prevents us from blocking a
# changegroup that contains an unacceptable commit followed later
# by a commit that fixes the problem.
tip = repo['tip']
for rev in pycompat.xrange(repo.changelog.tiprev(),
repo[node].rev() - 1, -1):
c = repo[rev]
for f in c.files():
if f in seen or f not in tip or f not in c:
continue
seen.add(f)
data = c[f].data()
if not stringutil.binary(data) and newline in data:
if not halt:
ui.warn(_('attempt to commit or push text file(s) '
'using %s line endings\n') %
newlinestr[newline])
ui.warn(_('in %s: %s\n') % (short(c.node()), f))
halt = True
if halt and hooktype == 'pretxnchangegroup':
crlf = newlinestr[newline].lower()
filter = filterstr[newline]
ui.warn(_('\nTo prevent this mistake in your local repository,\n'
'add to Mercurial.ini or .hg/hgrc:\n'
'\n'
'[hooks]\n'
'pretxncommit.%s = python:hgext.win32text.forbid%s\n'
'\n'
'and also consider adding:\n'
'\n'
'[extensions]\n'
'win32text =\n'
'[encode]\n'
'** = %sencode:\n'
'[decode]\n'
'** = %sdecode:\n') % (crlf, crlf, filter, filter))
return halt
def forbidcrlf(ui, repo, hooktype, node, **kwargs):
return forbidnewline(ui, repo, hooktype, node, '\r\n', **kwargs)
def forbidcr(ui, repo, hooktype, node, **kwargs):
return forbidnewline(ui, repo, hooktype, node, '\r', **kwargs)
def reposetup(ui, repo):
if not repo.local():
return
for name, fn in _filters.iteritems():
repo.adddatafilter(name, fn)
def extsetup(ui):
# deprecated config: win32text.warn
if ui.configbool('win32text', 'warn'):
ui.warn(_("win32text is deprecated: "
"https://mercurial-scm.org/wiki/Win32TextExtension\n"))