##// END OF EJS Templates
compression: introduce a `storage.revlog.zlib.level` configuration...
compression: introduce a `storage.revlog.zlib.level` configuration This option control the zlib compression level used when compression revlog chunk. This is also a good excuse to pave the way for a similar configuration option for the zstd compression engine. Having a dedicated option for each compression algorithm is useful because they don't support the same range of values. Using a higher zlib compression impact CPU consumption at compression time, but does not directly affected decompression time. However dealing with small compressed chunk can directly help decompression and indirectly help other revlog logic. I ran some basic test on repositories using different level. I am using the mercurial, pypy, netbeans and mozilla-central clone from our benchmark suite. All tested repository use sparse-revlog and got all their delta recomputed. The different compression level has a small effect on the repository size (about 10% variation in the total range). My quick analysis is that revlog mostly store small delta, that are not affected by the compression level much. So the variation probably mostly comes from better compression of the snapshots revisions, and snapshot revision only represent a small portion of the repository content. I also made some basic timings measurements. The "read" timings are gathered using simple run of `hg perfrevlogrevisions`, the "write" timings using `hg perfrevlogwrite` (restricted to the last 5000 revisions for netbeans and mozilla central). The timings are gathered on a generic machine, (not one of our performance locked machine), so small variation might not be meaningful. However large trend remains relevant. Keep in mind that these numbers are not pure compression/decompression time. They also involve the full revlog logic. In particular the difference in chunk size has an impact on the delta chain structure, affecting performance when writing or reading them. On read/write performance, the compression level has a bigger impact. Counter-intuitively, the higher compression levels improve "write" performance for the large repositories in our tested setting. Maybe because the last 5000 delta chain end up having a very different shape in this specific spot? Or maybe because of a more general trend of better delta chains thanks to the smaller chunk and snapshot. This series does not intend to change the default compression level. However, these result call for a deeper analysis of this performance difference in the future. Full data ========= repo level .hg/store size 00manifest.d read write ---------------------------------------------------------------- mercurial 1 49,402,813 5,963,475 0.170159 53.250304 mercurial 6 47,197,397 5,875,730 0.182820 56.264320 mercurial 9 47,121,596 5,849,781 0.189219 56.293612 pypy 1 370,830,572 28,462,425 2.679217 460.721984 pypy 6 340,112,317 27,648,747 2.768691 467.537158 pypy 9 338,360,736 27,639,003 2.763495 476.589918 netbeans 1 1,281,847,810 165,495,457 122.477027 520.560316 netbeans 6 1,205,284,353 159,161,207 139.876147 715.930400 netbeans 9 1,197,135,671 155,034,586 141.620281 678.297064 mozilla 1 2,775,497,186 298,527,987 147.867662 751.263721 mozilla 6 2,596,856,420 286,597,671 170.572118 987.056093 mozilla 9 2,587,542,494 287,018,264 163.622338 739.803002

File last commit:

r34235:a6c18628 default
r42210:1fac9b93 default
Show More
__init__.py
219 lines | 7.0 KiB | text/x-python | PythonLexer
# zeroconf.py - zeroconf support for Mercurial
#
# Copyright 2005-2007 Matt Mackall <mpm@selenic.com>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
'''discover and advertise repositories on the local network
Zeroconf-enabled repositories will be announced in a network without
the need to configure a server or a service. They can be discovered
without knowing their actual IP address.
To allow other people to discover your repository using run
:hg:`serve` in your repository::
$ cd test
$ hg serve
You can discover Zeroconf-enabled repositories by running
:hg:`paths`::
$ hg paths
zc-test = http://example.com:8000/test
'''
from __future__ import absolute_import
import os
import socket
import time
from . import Zeroconf
from mercurial import (
dispatch,
encoding,
extensions,
hg,
ui as uimod,
)
from mercurial.hgweb import (
server as servermod
)
# Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = 'ships-with-hg-core'
# publish
server = None
localip = None
def getip():
# finds external-facing interface without sending any packets (Linux)
try:
s = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
s.connect(('1.0.0.1', 0))
ip = s.getsockname()[0]
return ip
except socket.error:
pass
# Generic method, sometimes gives useless results
try:
dumbip = socket.gethostbyaddr(socket.gethostname())[2][0]
if ':' in dumbip:
dumbip = '127.0.0.1'
if not dumbip.startswith('127.'):
return dumbip
except (socket.gaierror, socket.herror):
dumbip = '127.0.0.1'
# works elsewhere, but actually sends a packet
try:
s = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
s.connect(('1.0.0.1', 1))
ip = s.getsockname()[0]
return ip
except socket.error:
pass
return dumbip
def publish(name, desc, path, port):
global server, localip
if not server:
ip = getip()
if ip.startswith('127.'):
# if we have no internet connection, this can happen.
return
localip = socket.inet_aton(ip)
server = Zeroconf.Zeroconf(ip)
hostname = socket.gethostname().split('.')[0]
host = hostname + ".local"
name = "%s-%s" % (hostname, name)
# advertise to browsers
svc = Zeroconf.ServiceInfo('_http._tcp.local.',
name + '._http._tcp.local.',
server = host,
port = port,
properties = {'description': desc,
'path': "/" + path},
address = localip, weight = 0, priority = 0)
server.registerService(svc)
# advertise to Mercurial clients
svc = Zeroconf.ServiceInfo('_hg._tcp.local.',
name + '._hg._tcp.local.',
server = host,
port = port,
properties = {'description': desc,
'path': "/" + path},
address = localip, weight = 0, priority = 0)
server.registerService(svc)
def zc_create_server(create_server, ui, app):
httpd = create_server(ui, app)
port = httpd.port
try:
repos = app.repos
except AttributeError:
# single repo
with app._obtainrepo() as repo:
name = app.reponame or os.path.basename(repo.root)
path = repo.ui.config("web", "prefix", "").strip('/')
desc = repo.ui.config("web", "description")
if not desc:
desc = name
publish(name, desc, path, port)
else:
# webdir
prefix = app.ui.config("web", "prefix", "").strip('/') + '/'
for repo, path in repos:
u = app.ui.copy()
u.readconfig(os.path.join(path, '.hg', 'hgrc'))
name = os.path.basename(repo)
path = (prefix + repo).strip('/')
desc = u.config('web', 'description')
if not desc:
desc = name
publish(name, desc, path, port)
return httpd
# listen
class listener(object):
def __init__(self):
self.found = {}
def removeService(self, server, type, name):
if repr(name) in self.found:
del self.found[repr(name)]
def addService(self, server, type, name):
self.found[repr(name)] = server.getServiceInfo(type, name)
def getzcpaths():
ip = getip()
if ip.startswith('127.'):
return
server = Zeroconf.Zeroconf(ip)
l = listener()
Zeroconf.ServiceBrowser(server, "_hg._tcp.local.", l)
time.sleep(1)
server.close()
for value in l.found.values():
name = value.name[:value.name.index('.')]
url = "http://%s:%s%s" % (socket.inet_ntoa(value.address), value.port,
value.properties.get("path", "/"))
yield "zc-" + name, url
def config(orig, self, section, key, *args, **kwargs):
if section == "paths" and key.startswith("zc-"):
for name, path in getzcpaths():
if name == key:
return path
return orig(self, section, key, *args, **kwargs)
def configitems(orig, self, section, *args, **kwargs):
repos = orig(self, section, *args, **kwargs)
if section == "paths":
repos += getzcpaths()
return repos
def configsuboptions(orig, self, section, name, *args, **kwargs):
opt, sub = orig(self, section, name, *args, **kwargs)
if section == "paths" and name.startswith("zc-"):
# We have to find the URL in the zeroconf paths. We can't cons up any
# suboptions, so we use any that we found in the original config.
for zcname, zcurl in getzcpaths():
if zcname == name:
return zcurl, sub
return opt, sub
def defaultdest(orig, source):
for name, path in getzcpaths():
if path == source:
return name.encode(encoding.encoding)
return orig(source)
def cleanupafterdispatch(orig, ui, options, cmd, cmdfunc):
try:
return orig(ui, options, cmd, cmdfunc)
finally:
# we need to call close() on the server to notify() the various
# threading Conditions and allow the background threads to exit
global server
if server:
server.close()
extensions.wrapfunction(dispatch, '_runcommand', cleanupafterdispatch)
extensions.wrapfunction(uimod.ui, 'config', config)
extensions.wrapfunction(uimod.ui, 'configitems', configitems)
extensions.wrapfunction(uimod.ui, 'configsuboptions', configsuboptions)
extensions.wrapfunction(hg, 'defaultdest', defaultdest)
extensions.wrapfunction(servermod, 'create_server', zc_create_server)