##// END OF EJS Templates
upstream » mercurial-mirror
RSS

Clone from https://www.mercurial-scm.org/repo/hg-all

sslutil: require TLS 1.1+ when supported...
sslutil: require TLS 1.1+ when supported Currently, Mercurial will use TLS 1.0 or newer when connecting to remote servers, selecting the highest TLS version supported by both peers. On older Pythons, only TLS 1.0 is available. On newer Pythons, TLS 1.1 and 1.2 should be available. Security professionals recommend avoiding TLS 1.0 if possible. PCI DSS 3.1 "strongly encourages" the use of TLS 1.2. Known attacks like BEAST and POODLE exist against TLS 1.0 (although mitigations are available and properly configured servers aren't vulnerable). I asked Eric Rescorla - Mozilla's resident crypto expert - whether Mercurial should drop support for TLS 1.0. His response was "if you can get away with it." Essentially, a number of servers on the Internet don't support TLS 1.1+. This is why web browsers continue to support TLS 1.0 despite desires from security experts. This patch changes Mercurial's default behavior on modern Python versions to require TLS 1.1+, thus avoiding known security issues with TLS 1.0 and making Mercurial more secure by default. Rather than drop TLS 1.0 support wholesale, we still allow TLS 1.0 to be used if configured. This is a compromise solution - ideally we'd disallow TLS 1.0. However, since we're not sure how many Mercurial servers don't support TLS 1.1+ and we're not sure how much user inconvenience this change will bring, I think it is prudent to ship an escape hatch that still allows usage of TLS 1.0. In the default case our users get better security. In the worst case, they are no worse off than before this patch. This patch has no effect when running on Python versions that don't support TLS 1.1+. As the added test shows, connecting to a server that doesn't support TLS 1.1+ will display a warning message with a link to our wiki, where we can guide people to configure their client to allow less secure connections.
Matt Mackall - - Load All Authors

File last commit:

r25474:8c14f87b default
r29560:303e9300 default
Show More
test-treediscovery-legacy.t
369 lines | 8.9 KiB | text/troff | Tads3Lexer
/ tests / test-treediscovery-legacy.t
History | Annotation | Raw |Copy content |Copy permalink
#require killdaemons
Tests discovery against servers without getbundle support:
$ cat >> $HGRCPATH <<EOF
> [ui]
> logtemplate="{rev} {node|short}: {desc} {branches}\n"
> EOF
$ cp $HGRCPATH $HGRCPATH-withcap
$ CAP="getbundle known changegroupsubset bundle2"
$ . "$TESTDIR/notcapable"
$ cp $HGRCPATH $HGRCPATH-nocap
$ cp $HGRCPATH-withcap $HGRCPATH
Prep for test server without branchmap support
$ CAP="branchmap"
$ . "$TESTDIR/notcapable"
$ cp $HGRCPATH $HGRCPATH-nocap-branchmap
$ cp $HGRCPATH-withcap $HGRCPATH
Setup HTTP server control:
$ remote=http://localhost:$HGPORT/
$ export remote
$ tstart() {
> echo '[web]' > $1/.hg/hgrc
> echo 'push_ssl = false' >> $1/.hg/hgrc
> echo 'allow_push = *' >> $1/.hg/hgrc
> cp $HGRCPATH-nocap $HGRCPATH
> hg serve -R $1 -p $HGPORT -d --pid-file=hg.pid -E errors.log
> cat hg.pid >> $DAEMON_PIDS
> }
$ tstop() {
> killdaemons.py
> cp $HGRCPATH-withcap $HGRCPATH
> }
Both are empty:
$ hg init empty1
$ hg init empty2
$ tstart empty2
$ hg incoming -R empty1 $remote
comparing with http://localhost:$HGPORT/
no changes found
[1]
$ hg outgoing -R empty1 $remote
comparing with http://localhost:$HGPORT/
no changes found
[1]
$ hg pull -R empty1 $remote
pulling from http://localhost:$HGPORT/
no changes found
$ hg push -R empty1 $remote
pushing to http://localhost:$HGPORT/
no changes found
[1]
$ tstop
Base repo:
$ hg init main
$ cd main
$ hg debugbuilddag -mo '+2:tbase @name1 +3:thead1 <tbase @name2 +4:thead2 @both /thead1 +2:tmaintip'
$ hg log -G
o 11 a19bfa7e7328: r11 both
|
o 10 8b6bad1512e1: r10 both
|
o 9 025829e08038: r9 both
|\
| o 8 d8f638ac69e9: r8 name2
| |
| o 7 b6b4d315a2ac: r7 name2
| |
| o 6 6c6f5d5f3c11: r6 name2
| |
| o 5 70314b29987d: r5 name2
| |
o | 4 e71dbbc70e03: r4 name1
| |
o | 3 2c8d5d5ec612: r3 name1
| |
o | 2 a7892891da29: r2 name1
|/
o 1 0019a3b924fd: r1
|
o 0 d57206cc072a: r0
$ cd ..
$ tstart main
Full clone:
$ hg clone main full
updating to branch default
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd full
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg pull $remote
pulling from http://localhost:$HGPORT/
searching for changes
no changes found
$ hg push $remote
pushing to http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ cd ..
Local is empty:
$ cd empty1
$ hg incoming $remote --rev name1
comparing with http://localhost:$HGPORT/
abort: cannot look up remote changes; remote repository does not support the 'changegroupsubset' capability!
[255]
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
0 d57206cc072a: r0
1 0019a3b924fd: r1
2 a7892891da29: r2 name1
3 2c8d5d5ec612: r3 name1
4 e71dbbc70e03: r4 name1
5 70314b29987d: r5 name2
6 6c6f5d5f3c11: r6 name2
7 b6b4d315a2ac: r7 name2
8 d8f638ac69e9: r8 name2
9 025829e08038: r9 both
10 8b6bad1512e1: r10 both
11 a19bfa7e7328: r11 both
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
no changes found
[1]
$ hg push $remote
pushing to http://localhost:$HGPORT/
no changes found
[1]
$ hg pull $remote
pulling from http://localhost:$HGPORT/
requesting all changes
adding changesets
adding manifests
adding file changes
added 12 changesets with 24 changes to 2 files
(run 'hg update' to get a working copy)
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ cd ..
Local is subset:
$ cp $HGRCPATH-withcap $HGRCPATH
$ hg clone main subset --rev name2 ; cd subset
adding changesets
adding manifests
adding file changes
added 6 changesets with 12 changes to 2 files
updating to branch name2
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cp $HGRCPATH-nocap $HGRCPATH
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
6 a7892891da29: r2 name1
7 2c8d5d5ec612: r3 name1
8 e71dbbc70e03: r4 name1
9 025829e08038: r9 both
10 8b6bad1512e1: r10 both
11 a19bfa7e7328: r11 both
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg push $remote
pushing to http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg pull $remote
pulling from http://localhost:$HGPORT/
searching for changes
adding changesets
adding manifests
adding file changes
added 6 changesets with 12 changes to 2 files
(run 'hg update' to get a working copy)
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ cd ..
Remote is empty:
$ tstop ; tstart empty2
$ cd main
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
0 d57206cc072a: r0
1 0019a3b924fd: r1
2 a7892891da29: r2 name1
3 2c8d5d5ec612: r3 name1
4 e71dbbc70e03: r4 name1
5 70314b29987d: r5 name2
6 6c6f5d5f3c11: r6 name2
7 b6b4d315a2ac: r7 name2
8 d8f638ac69e9: r8 name2
9 025829e08038: r9 both
10 8b6bad1512e1: r10 both
11 a19bfa7e7328: r11 both
$ hg pull $remote
pulling from http://localhost:$HGPORT/
searching for changes
no changes found
$ hg push $remote
pushing to http://localhost:$HGPORT/
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 12 changesets with 24 changes to 2 files
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ cd ..
Local is superset:
$ tstop
$ hg clone main subset2 --rev name2
adding changesets
adding manifests
adding file changes
added 6 changesets with 12 changes to 2 files
updating to branch name2
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ tstart subset2
$ cd main
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
2 a7892891da29: r2 name1
3 2c8d5d5ec612: r3 name1
4 e71dbbc70e03: r4 name1
9 025829e08038: r9 both
10 8b6bad1512e1: r10 both
11 a19bfa7e7328: r11 both
$ hg pull $remote
pulling from http://localhost:$HGPORT/
searching for changes
no changes found
$ hg push $remote
pushing to http://localhost:$HGPORT/
searching for changes
abort: push creates new remote branches: both, name1!
(use 'hg push --new-branch' to create new remote branches)
[255]
$ hg push $remote --new-branch
pushing to http://localhost:$HGPORT/
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 6 changesets with 12 changes to 2 files
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ cd ..
Partial pull:
$ tstop ; tstart main
$ hg clone $remote partial --rev name2
abort: partial pull cannot be done because other repository doesn't support changegroupsubset.
[255]
$ hg init partial; cd partial
$ hg incoming $remote --rev name2
comparing with http://localhost:$HGPORT/
abort: cannot look up remote changes; remote repository does not support the 'changegroupsubset' capability!
[255]
$ hg pull $remote --rev name2
pulling from http://localhost:$HGPORT/
abort: partial pull cannot be done because other repository doesn't support changegroupsubset.
[255]
$ cd ..
$ tstop
Exercise pushing to server without branchmap capability
$ cp $HGRCPATH-nocap-branchmap $HGRCPATH-nocap
$ hg init rlocal
$ cd rlocal
$ echo A > A
$ hg ci -Am A
adding A
$ cd ..
$ hg clone rlocal rremote
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd rlocal
$ echo B > B
$ hg ci -Am B
adding B
$ cd ..
$ tstart rremote
$ cd rlocal
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
1 27547f69f254: B
$ hg pull $remote
pulling from http://localhost:$HGPORT/
searching for changes
no changes found
$ hg push $remote
pushing to http://localhost:$HGPORT/
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 1 changesets with 1 changes to 1 files
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ cd ..
$ tstop