##// END OF EJS Templates
repair: migrate revlogs during upgrade...
repair: migrate revlogs during upgrade Our next step for in-place upgrade is to migrate store data. Revlogs are the biggest source of data within the store and a store is useless without them, so we implement their migration first. Our strategy for migrating revlogs is to walk the store and call `revlog.clone()` on each revlog. There are some minor complications. Because revlogs have different storage options (e.g. changelog has generaldelta and delta chains disabled), we need to obtain the correct class of revlog so inserted data is encoded properly for its type. Various attempts at implementing progress indicators that didn't lead to frustration from false "it's almost done" indicators were made. I initially used a single progress bar based on number of revlogs. However, this quickly churned through all filelogs, got to 99% then effectively froze at 99.99% when it got to the manifest. So I converted the progress bar to total revision count. This was a little bit better. But the manifest was still significantly slower than filelogs and it took forever to process the last few percent. I then tried both revision/chunk bytes and raw bytes as the denominator. This had the opposite effect: because so much data is in manifests, it would churn through filelogs without showing much progress. When it got to manifests, it would fill in 90+% of the progress bar. I finally gave up having a unified progress bar and instead implemented 3 progress bars: 1 for filelog revisions, 1 for manifest revisions, and 1 for changelog revisions. I added extra messages indicating the total number of revisions of each so users know there are more progress bars coming. I also added extra messages before and after each stage to give extra details about what is happening. Strictly speaking, this isn't necessary. But the numbers are impressive. For example, when converting a non-generaldelta mozilla-central repository, the messages you see are: migrating 2475593 total revisions (1833043 in filelogs, 321156 in manifests, 321394 in changelog) migrating 1.67 GB in store; 2508 GB tracked data migrating 267868 filelogs containing 1833043 revisions (1.09 GB in store; 57.3 GB tracked data) finished migrating 1833043 filelog revisions across 267868 filelogs; change in size: -415776 bytes migrating 1 manifests containing 321156 revisions (518 MB in store; 2451 GB tracked data) That "2508 GB" figure really blew me away. I had no clue that the raw tracked data in mozilla-central was that large. Granted, 2451 GB is in the manifest and "only" 57.3 GB is in filelogs. But still. It's worth noting that gratuitous loading of source revlogs in order to display numbers and progress bars does serve a purpose: it ensures we can open all source revlogs. We don't want to spend several minutes copying revlogs only to encounter a permissions error or similar later. As part of this commit, we also add swapping of the store directory to the upgrade function. After revlogs are converted, we move the old store into the backup directory then move the temporary repo's store into the old store's location. On well-behaved systems, this should be 2 atomic operations and the window of inconsistency show be very narrow. There are still a few improvements to be made to store copying and upgrading. But this commit gets the bulk of the work out of the way.

File last commit:

r30585:0f865311 default
r30779:38aa1ca9 default
Show More
error.py
248 lines | 7.8 KiB | text/x-python | PythonLexer
# error.py - Mercurial exceptions
#
# Copyright 2005-2008 Matt Mackall <mpm@selenic.com>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
"""Mercurial exceptions.
This allows us to catch exceptions at higher levels without forcing
imports.
"""
from __future__ import absolute_import
# Do not import anything here, please
class Hint(object):
"""Mix-in to provide a hint of an error
This should come first in the inheritance list to consume a hint and
pass remaining arguments to the exception class.
"""
def __init__(self, *args, **kw):
self.hint = kw.pop('hint', None)
super(Hint, self).__init__(*args, **kw)
class RevlogError(Hint, Exception):
pass
class FilteredIndexError(IndexError):
pass
class LookupError(RevlogError, KeyError):
def __init__(self, name, index, message):
self.name = name
self.index = index
# this can't be called 'message' because at least some installs of
# Python 2.6+ complain about the 'message' property being deprecated
self.lookupmessage = message
if isinstance(name, str) and len(name) == 20:
from .node import short
name = short(name)
RevlogError.__init__(self, '%s@%s: %s' % (index, name, message))
def __str__(self):
return RevlogError.__str__(self)
class FilteredLookupError(LookupError):
pass
class ManifestLookupError(LookupError):
pass
class CommandError(Exception):
"""Exception raised on errors in parsing the command line."""
class InterventionRequired(Hint, Exception):
"""Exception raised when a command requires human intervention."""
class Abort(Hint, Exception):
"""Raised if a command needs to print an error and exit."""
class HookLoadError(Abort):
"""raised when loading a hook fails, aborting an operation
Exists to allow more specialized catching."""
class HookAbort(Abort):
"""raised when a validation hook fails, aborting an operation
Exists to allow more specialized catching."""
class ConfigError(Abort):
"""Exception raised when parsing config files"""
class UpdateAbort(Abort):
"""Raised when an update is aborted for destination issue"""
class MergeDestAbort(Abort):
"""Raised when an update is aborted for destination issues"""
class NoMergeDestAbort(MergeDestAbort):
"""Raised when an update is aborted because there is nothing to merge"""
class ManyMergeDestAbort(MergeDestAbort):
"""Raised when an update is aborted because destination is ambiguous"""
class ResponseExpected(Abort):
"""Raised when an EOF is received for a prompt"""
def __init__(self):
from .i18n import _
Abort.__init__(self, _('response expected'))
class OutOfBandError(Hint, Exception):
"""Exception raised when a remote repo reports failure"""
class ParseError(Hint, Exception):
"""Raised when parsing config files and {rev,file}sets (msg[, pos])"""
class UnknownIdentifier(ParseError):
"""Exception raised when a {rev,file}set references an unknown identifier"""
def __init__(self, function, symbols):
from .i18n import _
ParseError.__init__(self, _("unknown identifier: %s") % function)
self.function = function
self.symbols = symbols
class RepoError(Hint, Exception):
pass
class RepoLookupError(RepoError):
pass
class FilteredRepoLookupError(RepoLookupError):
pass
class CapabilityError(RepoError):
pass
class RequirementError(RepoError):
"""Exception raised if .hg/requires has an unknown entry."""
class UnsupportedMergeRecords(Abort):
def __init__(self, recordtypes):
from .i18n import _
self.recordtypes = sorted(recordtypes)
s = ' '.join(self.recordtypes)
Abort.__init__(
self, _('unsupported merge state records: %s') % s,
hint=_('see https://mercurial-scm.org/wiki/MergeStateRecords for '
'more information'))
class LockError(IOError):
def __init__(self, errno, strerror, filename, desc):
IOError.__init__(self, errno, strerror, filename)
self.desc = desc
class LockHeld(LockError):
def __init__(self, errno, filename, desc, locker):
LockError.__init__(self, errno, 'Lock held', filename, desc)
self.locker = locker
class LockUnavailable(LockError):
pass
# LockError is for errors while acquiring the lock -- this is unrelated
class LockInheritanceContractViolation(RuntimeError):
pass
class ResponseError(Exception):
"""Raised to print an error with part of output and exit."""
class UnknownCommand(Exception):
"""Exception raised if command is not in the command table."""
class AmbiguousCommand(Exception):
"""Exception raised if command shortcut matches more than one command."""
# derived from KeyboardInterrupt to simplify some breakout code
class SignalInterrupt(KeyboardInterrupt):
"""Exception raised on SIGTERM and SIGHUP."""
class SignatureError(Exception):
pass
class PushRaced(RuntimeError):
"""An exception raised during unbundling that indicate a push race"""
class ProgrammingError(RuntimeError):
"""Raised if a mercurial (core or extension) developer made a mistake"""
# bundle2 related errors
class BundleValueError(ValueError):
"""error raised when bundle2 cannot be processed"""
class BundleUnknownFeatureError(BundleValueError):
def __init__(self, parttype=None, params=(), values=()):
self.parttype = parttype
self.params = params
self.values = values
if self.parttype is None:
msg = 'Stream Parameter'
else:
msg = parttype
entries = self.params
if self.params and self.values:
assert len(self.params) == len(self.values)
entries = []
for idx, par in enumerate(self.params):
val = self.values[idx]
if val is None:
entries.append(val)
else:
entries.append("%s=%r" % (par, val))
if entries:
msg = '%s - %s' % (msg, ', '.join(entries))
ValueError.__init__(self, msg)
class ReadOnlyPartError(RuntimeError):
"""error raised when code tries to alter a part being generated"""
class PushkeyFailed(Abort):
"""error raised when a pushkey part failed to update a value"""
def __init__(self, partid, namespace=None, key=None, new=None, old=None,
ret=None):
self.partid = partid
self.namespace = namespace
self.key = key
self.new = new
self.old = old
self.ret = ret
# no i18n expected to be processed into a better message
Abort.__init__(self, 'failed to update value for "%s/%s"'
% (namespace, key))
class CensoredNodeError(RevlogError):
"""error raised when content verification fails on a censored node
Also contains the tombstone data substituted for the uncensored data.
"""
def __init__(self, filename, node, tombstone):
from .node import short
RevlogError.__init__(self, '%s:%s' % (filename, short(node)))
self.tombstone = tombstone
class CensoredBaseError(RevlogError):
"""error raised when a delta is rejected because its base is censored
A delta based on a censored revision must be formed as single patch
operation which replaces the entire base with new content. This ensures
the delta may be applied by clones which have not censored the base.
"""
class InvalidBundleSpecification(Exception):
"""error raised when a bundle specification is invalid.
This is used for syntax errors as opposed to support errors.
"""
class UnsupportedBundleSpecification(Exception):
"""error raised when a bundle specification is not supported."""
class CorruptedState(Exception):
"""error raised when a command is not able to read its state from file"""