##// END OF EJS Templates
branchmap-v3: filter topo heads using node for performance reason...
branchmap-v3: filter topo heads using node for performance reason The branchmap currently contains heads as nodeid. If we build a set of revnum with the topological heads, we need to turn the nodeid in the branchmap to revnum to be able to check if they are topo-heads. That nodeid → revnum lookup is "expensive" and adds up to something noticeable if you do it hundreds of thousand of time. Instead we turn all the topo-heads revnums into nodes and build a set. So we can directly test membership of the nodeids stored in the branchmap. That is much faster. Ideally we would have revnum in the branchmap and could directly test revnum against a revnum set and that would be even faster. However that's an adventure for another time. Without this change, the branchmap format "v3" was significantly slower than the "v2" format. With this changes, some of that gap is recovered With rust + persistent nodemap, this overhead was smaller because the extra lookup did not had to to build the nodemap from scratch. In addition the mozilla-unified repository is able to use the "pure_top" mode of branchmap v3, so it was not really affected by this. Future changeset will work of the remaining of the performance gap. ### benchmark.name = hg.command.unbundle # bin-env-vars.hg.py-re2-module = default # benchmark.variants.issue6528 = disabled # benchmark.variants.resource-usage = default # benchmark.variants.reuse-external-delta-parent = yes # benchmark.variants.revs = any-1-extra-rev # benchmark.variants.source = unbundle # benchmark.variants.validate = default # benchmark.variants.verbosity = quiet ## data-env-vars.name = netbeans-2018-08-01-zstd-sparse-revlog # bin-env-vars.hg.flavor = default branch-v2: 0.233711 ~~~~~ branch-v3 before: 0.380994 (+63.02%, +0.15) branch-v3 after: 0.368769 (+57.79%, +0.14) # bin-env-vars.hg.flavor = rust branch-v2: 0.235230 ~~~~~ branch-v3 before: 0.385060 (+63.70%, +0.15) branch-v3 after: 0.372460 (+58.34%, +0.14) ## data-env-vars.name = netbeans-2018-08-01-ds2-pnm # bin-env-vars.hg.flavor = rust branch-v2: 0.255586 ~~~~~ branch-v3 before: 0.317524 (+24.23%, +0.06) branch-v3 after: 0.318907 (+24.78%, +0.06) ## data-env-vars.name = mozilla-central-2024-03-22-zstd-sparse-revlog # bin-env-vars.hg.flavor = default branch-v2: 0.339010 ~~~~~ branch-v3 before: 0.410007 (+20.94%, +0.07) branch-v3 after: 0.349752 (+3.17%, +0.01) # bin-env-vars.hg.flavor = rust branch-v2: 0.346525 ~~~~~ branch-v3 before: 0.410428 (+18.44%, +0.06) branch-v3 after: 0.354300 (+2.24%, +0.01) ## data-env-vars.name = mozilla-central-2024-03-22-ds2-pnm # bin-env-vars.hg.flavor = rust branch-v2: 0.380202 ~~~~~ branch-v3 before: 0.393871 (+3.60%, +0.01) branch-v3 after: 0.396293 (+4.23%, +0.02) ## data-env-vars.name = mozilla-unified-2024-03-22-zstd-sparse-revlog # bin-env-vars.hg.flavor = default branch-v2: 0.412165 ~~~~~ branch-v3 before: 0.438105 (+6.29%, +0.03) branch-v3 after: 0.424769 (+3.06%, +0.01) # bin-env-vars.hg.flavor = rust branch-v2: 0.412397 ~~~~~ branch-v3 before: 0.438405 (+6.31%, +0.03) branch-v3 after: 0.421796 (+2.28%, +0.01) ## data-env-vars.name = mozilla-unified-2024-03-22-ds2-pnm # bin-env-vars.hg.flavor = rust branch-v2: 0.429501 ~~~~~ branch-v3 before: 0.452692 (+5.40%, +0.02) branch-v3 after: 0.443849 (+3.34%, +0.01) ## data-env-vars.name = mozilla-try-2024-03-26-zstd-sparse-revlog # bin-env-vars.hg.flavor = default branch-v2: 3.403171 ~~~~~ branch-v3 before: 6.562345 (+92.83%, +3.16) branch-v3 after: 6.234055 (+83.18%, +2.83) # bin-env-vars.hg.flavor = rust branch-v2: 3.454876 ~~~~~ branch-v3 before: 6.160248 (+78.31%, +2.71) branch-v3 after: 6.307813 (+82.58%, +2.85) ## data-env-vars.name = mozilla-try-2024-03-26-ds2-pnm # bin-env-vars.hg.flavor = rust branch-v2: 3.465435 ~~~~~ branch-v3 before: 5.381648 (+55.30%, +1.92) branch-v3 after: 5.176076 (+49.36%, +1.71)

File last commit:

r49676:b0dd39b9 default
r52869:41b8892a default
Show More
mpatch.c
203 lines | 4.4 KiB | text/x-c | CLexer
/*
mpatch.c - efficient binary patching for Mercurial
This implements a patch algorithm that's O(m + nlog n) where m is the
size of the output and n is the number of patches.
Given a list of binary patches, it unpacks each into a hunk list,
then combines the hunk lists with a treewise recursion to form a
single hunk list. This hunk list is then applied to the original
text.
The text (or binary) fragments are copied directly from their source
Python objects into a preallocated output string to avoid the
allocation of intermediate Python objects. Working memory is about 2x
the total number of hunks.
Copyright 2005, 2006 Olivia Mackall <olivia@selenic.com>
This software may be used and distributed according to the terms
of the GNU General Public License, incorporated herein by reference.
*/
#define PY_SSIZE_T_CLEAN
#include <Python.h>
#include <stdlib.h>
#include <string.h>
#include "bitmanipulation.h"
#include "compat.h"
#include "mpatch.h"
#include "util.h"
static char mpatch_doc[] = "Efficient binary patching.";
static PyObject *mpatch_Error;
static void setpyerr(int r)
{
switch (r) {
case MPATCH_ERR_NO_MEM:
PyErr_NoMemory();
break;
case MPATCH_ERR_CANNOT_BE_DECODED:
PyErr_SetString(mpatch_Error, "patch cannot be decoded");
break;
case MPATCH_ERR_INVALID_PATCH:
PyErr_SetString(mpatch_Error, "invalid patch");
break;
}
}
struct mpatch_flist *cpygetitem(void *bins, ssize_t pos)
{
Py_buffer buffer;
struct mpatch_flist *res = NULL;
int r;
PyObject *tmp = PyList_GetItem((PyObject *)bins, pos);
if (!tmp) {
return NULL;
}
if (PyObject_GetBuffer(tmp, &buffer, PyBUF_CONTIG_RO)) {
return NULL;
}
if ((r = mpatch_decode(buffer.buf, buffer.len, &res)) < 0) {
if (!PyErr_Occurred()) {
setpyerr(r);
}
res = NULL;
}
PyBuffer_Release(&buffer);
return res;
}
static PyObject *patches(PyObject *self, PyObject *args)
{
PyObject *text, *bins, *result;
struct mpatch_flist *patch;
Py_buffer buffer;
int r = 0;
char *out;
Py_ssize_t len, outlen;
if (!PyArg_ParseTuple(args, "OO:mpatch", &text, &bins)) {
return NULL;
}
len = PyList_Size(bins);
if (!len) {
/* nothing to do */
Py_INCREF(text);
return text;
}
if (PyObject_GetBuffer(text, &buffer, PyBUF_CONTIG_RO)) {
return NULL;
}
patch = mpatch_fold(bins, cpygetitem, 0, len);
if (!patch) { /* error already set or memory error */
if (!PyErr_Occurred()) {
PyErr_NoMemory();
}
result = NULL;
goto cleanup;
}
outlen = mpatch_calcsize(buffer.len, patch);
if (outlen < 0) {
r = (int)outlen;
result = NULL;
goto cleanup;
}
result = PyBytes_FromStringAndSize(NULL, outlen);
if (!result) {
result = NULL;
goto cleanup;
}
out = PyBytes_AsString(result);
/* clang-format off */
{
Py_BEGIN_ALLOW_THREADS
r = mpatch_apply(out, buffer.buf, buffer.len, patch);
Py_END_ALLOW_THREADS
}
/* clang-format on */
if (r < 0) {
Py_DECREF(result);
result = NULL;
}
cleanup:
mpatch_lfree(patch);
PyBuffer_Release(&buffer);
if (!result && !PyErr_Occurred()) {
setpyerr(r);
}
return result;
}
/* calculate size of a patched file directly */
static PyObject *patchedsize(PyObject *self, PyObject *args)
{
long orig, start, end, len, outlen = 0, last = 0, pos = 0;
Py_ssize_t patchlen;
char *bin;
if (!PyArg_ParseTuple(args, "ly#", &orig, &bin, &patchlen)) {
return NULL;
}
while (pos >= 0 && pos < patchlen) {
start = getbe32(bin + pos);
end = getbe32(bin + pos + 4);
len = getbe32(bin + pos + 8);
if (start > end) {
break; /* sanity check */
}
pos += 12 + len;
outlen += start - last;
last = end;
outlen += len;
}
if (pos != patchlen) {
if (!PyErr_Occurred()) {
PyErr_SetString(mpatch_Error,
"patch cannot be decoded");
}
return NULL;
}
outlen += orig - last;
return Py_BuildValue("l", outlen);
}
static PyMethodDef methods[] = {
{"patches", patches, METH_VARARGS, "apply a series of patches\n"},
{"patchedsize", patchedsize, METH_VARARGS, "calculed patched size\n"},
{NULL, NULL},
};
static const int version = 1;
static struct PyModuleDef mpatch_module = {
PyModuleDef_HEAD_INIT, "mpatch", mpatch_doc, -1, methods,
};
PyMODINIT_FUNC PyInit_mpatch(void)
{
PyObject *m;
m = PyModule_Create(&mpatch_module);
if (m == NULL)
return NULL;
mpatch_Error =
PyErr_NewException("mercurial.cext.mpatch.mpatchError", NULL, NULL);
Py_INCREF(mpatch_Error);
PyModule_AddObject(m, "mpatchError", mpatch_Error);
PyModule_AddIntConstant(m, "version", version);
return m;
}