##// END OF EJS Templates
branchmap-v3: filter topo heads using node for performance reason...
branchmap-v3: filter topo heads using node for performance reason The branchmap currently contains heads as nodeid. If we build a set of revnum with the topological heads, we need to turn the nodeid in the branchmap to revnum to be able to check if they are topo-heads. That nodeid → revnum lookup is "expensive" and adds up to something noticeable if you do it hundreds of thousand of time. Instead we turn all the topo-heads revnums into nodes and build a set. So we can directly test membership of the nodeids stored in the branchmap. That is much faster. Ideally we would have revnum in the branchmap and could directly test revnum against a revnum set and that would be even faster. However that's an adventure for another time. Without this change, the branchmap format "v3" was significantly slower than the "v2" format. With this changes, some of that gap is recovered With rust + persistent nodemap, this overhead was smaller because the extra lookup did not had to to build the nodemap from scratch. In addition the mozilla-unified repository is able to use the "pure_top" mode of branchmap v3, so it was not really affected by this. Future changeset will work of the remaining of the performance gap. ### benchmark.name = hg.command.unbundle # bin-env-vars.hg.py-re2-module = default # benchmark.variants.issue6528 = disabled # benchmark.variants.resource-usage = default # benchmark.variants.reuse-external-delta-parent = yes # benchmark.variants.revs = any-1-extra-rev # benchmark.variants.source = unbundle # benchmark.variants.validate = default # benchmark.variants.verbosity = quiet ## data-env-vars.name = netbeans-2018-08-01-zstd-sparse-revlog # bin-env-vars.hg.flavor = default branch-v2: 0.233711 ~~~~~ branch-v3 before: 0.380994 (+63.02%, +0.15) branch-v3 after: 0.368769 (+57.79%, +0.14) # bin-env-vars.hg.flavor = rust branch-v2: 0.235230 ~~~~~ branch-v3 before: 0.385060 (+63.70%, +0.15) branch-v3 after: 0.372460 (+58.34%, +0.14) ## data-env-vars.name = netbeans-2018-08-01-ds2-pnm # bin-env-vars.hg.flavor = rust branch-v2: 0.255586 ~~~~~ branch-v3 before: 0.317524 (+24.23%, +0.06) branch-v3 after: 0.318907 (+24.78%, +0.06) ## data-env-vars.name = mozilla-central-2024-03-22-zstd-sparse-revlog # bin-env-vars.hg.flavor = default branch-v2: 0.339010 ~~~~~ branch-v3 before: 0.410007 (+20.94%, +0.07) branch-v3 after: 0.349752 (+3.17%, +0.01) # bin-env-vars.hg.flavor = rust branch-v2: 0.346525 ~~~~~ branch-v3 before: 0.410428 (+18.44%, +0.06) branch-v3 after: 0.354300 (+2.24%, +0.01) ## data-env-vars.name = mozilla-central-2024-03-22-ds2-pnm # bin-env-vars.hg.flavor = rust branch-v2: 0.380202 ~~~~~ branch-v3 before: 0.393871 (+3.60%, +0.01) branch-v3 after: 0.396293 (+4.23%, +0.02) ## data-env-vars.name = mozilla-unified-2024-03-22-zstd-sparse-revlog # bin-env-vars.hg.flavor = default branch-v2: 0.412165 ~~~~~ branch-v3 before: 0.438105 (+6.29%, +0.03) branch-v3 after: 0.424769 (+3.06%, +0.01) # bin-env-vars.hg.flavor = rust branch-v2: 0.412397 ~~~~~ branch-v3 before: 0.438405 (+6.31%, +0.03) branch-v3 after: 0.421796 (+2.28%, +0.01) ## data-env-vars.name = mozilla-unified-2024-03-22-ds2-pnm # bin-env-vars.hg.flavor = rust branch-v2: 0.429501 ~~~~~ branch-v3 before: 0.452692 (+5.40%, +0.02) branch-v3 after: 0.443849 (+3.34%, +0.01) ## data-env-vars.name = mozilla-try-2024-03-26-zstd-sparse-revlog # bin-env-vars.hg.flavor = default branch-v2: 3.403171 ~~~~~ branch-v3 before: 6.562345 (+92.83%, +3.16) branch-v3 after: 6.234055 (+83.18%, +2.83) # bin-env-vars.hg.flavor = rust branch-v2: 3.454876 ~~~~~ branch-v3 before: 6.160248 (+78.31%, +2.71) branch-v3 after: 6.307813 (+82.58%, +2.85) ## data-env-vars.name = mozilla-try-2024-03-26-ds2-pnm # bin-env-vars.hg.flavor = rust branch-v2: 3.465435 ~~~~~ branch-v3 before: 5.381648 (+55.30%, +1.92) branch-v3 after: 5.176076 (+49.36%, +1.71)

File last commit:

r52756:f4733654 default
r52869:41b8892a default
Show More
filelog.py
329 lines | 9.6 KiB | text/x-python | PythonLexer
# filelog.py - file history class for mercurial
#
# Copyright 2005-2007 Olivia Mackall <olivia@selenic.com>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
from __future__ import annotations
import typing
from typing import (
Iterable,
Iterator,
)
from .i18n import _
from .node import nullrev
from . import (
error,
revlog,
)
from .interfaces import (
repository,
util as interfaceutil,
)
from .utils import storageutil
from .revlogutils import (
constants as revlog_constants,
rewrite,
)
class FileLog:
_revlog: revlog.revlog
nullid: bytes
_fix_issue6528: bool
def __init__(self, opener, path, try_split=False):
self._revlog = revlog.revlog(
opener,
# XXX should use the unencoded path
target=(revlog_constants.KIND_FILELOG, path),
radix=b'/'.join((b'data', path)),
censorable=True,
canonical_parent_order=False, # see comment in revlog.py
try_split=try_split,
)
# Full name of the user visible file, relative to the repository root.
# Used by LFS.
self._revlog.filename = path
self.nullid = self._revlog.nullid
opts = opener.options
self._fix_issue6528 = opts.get(b'issue6528.fix-incoming', True)
def get_revlog(self) -> revlog.revlog:
"""return an actual revlog instance if any
This exist because a lot of code leverage the fact the underlying
storage is a revlog for optimization, so giving simple way to access
the revlog instance helps such code.
"""
return self._revlog
def __len__(self) -> int:
return len(self._revlog)
def __iter__(self) -> Iterator[int]:
return self._revlog.__iter__()
def hasnode(self, node):
if node in (self.nullid, nullrev):
return False
try:
self._revlog.rev(node)
return True
except (TypeError, ValueError, IndexError, error.LookupError):
return False
def revs(self, start=0, stop=None):
return self._revlog.revs(start=start, stop=stop)
def parents(self, node):
return self._revlog.parents(node)
def parentrevs(self, rev):
return self._revlog.parentrevs(rev)
def rev(self, node):
return self._revlog.rev(node)
def node(self, rev):
return self._revlog.node(rev)
def lookup(self, node):
return storageutil.fileidlookup(
self._revlog, node, self._revlog.display_id
)
def linkrev(self, rev):
return self._revlog.linkrev(rev)
def commonancestorsheads(self, node1, node2):
return self._revlog.commonancestorsheads(node1, node2)
# Used by dagop.blockdescendants().
def descendants(self, revs):
return self._revlog.descendants(revs)
def heads(self, start=None, stop=None):
return self._revlog.heads(start, stop)
# Used by hgweb, children extension.
def children(self, node):
return self._revlog.children(node)
def iscensored(self, rev):
return self._revlog.iscensored(rev)
def revision(self, node):
return self._revlog.revision(node)
def rawdata(self, node):
return self._revlog.rawdata(node)
def emitrevisions(
self,
nodes,
nodesorder=None,
revisiondata=False,
assumehaveparentrevisions=False,
deltamode=repository.CG_DELTAMODE_STD,
sidedata_helpers=None,
debug_info=None,
):
return self._revlog.emitrevisions(
nodes,
nodesorder=nodesorder,
revisiondata=revisiondata,
assumehaveparentrevisions=assumehaveparentrevisions,
deltamode=deltamode,
sidedata_helpers=sidedata_helpers,
debug_info=debug_info,
)
def addrevision(
self,
revisiondata,
transaction,
linkrev,
p1,
p2,
node=None,
flags=revlog.REVIDX_DEFAULT_FLAGS,
cachedelta=None,
):
return self._revlog.addrevision(
revisiondata,
transaction,
linkrev,
p1,
p2,
node=node,
flags=flags,
cachedelta=cachedelta,
)
def addgroup(
self,
deltas,
linkmapper,
transaction,
addrevisioncb=None,
duplicaterevisioncb=None,
maybemissingparents=False,
debug_info=None,
delta_base_reuse_policy=None,
):
if maybemissingparents:
raise error.Abort(
_(
b'revlog storage does not support missing '
b'parents write mode'
)
)
with self._revlog._writing(transaction):
if self._fix_issue6528:
deltas = rewrite.filter_delta_issue6528(self._revlog, deltas)
return self._revlog.addgroup(
deltas,
linkmapper,
transaction,
addrevisioncb=addrevisioncb,
duplicaterevisioncb=duplicaterevisioncb,
debug_info=debug_info,
delta_base_reuse_policy=delta_base_reuse_policy,
)
def getstrippoint(self, minlink):
return self._revlog.getstrippoint(minlink)
def strip(self, minlink, transaction):
return self._revlog.strip(minlink, transaction)
def censorrevision(self, tr, node, tombstone=b''):
return self._revlog.censorrevision(tr, node, tombstone=tombstone)
def files(self):
return self._revlog.files()
def read(self, node):
return storageutil.filtermetadata(self.revision(node))
def add(self, text, meta, transaction, link, p1=None, p2=None):
if meta or text.startswith(b'\1\n'):
text = storageutil.packmeta(meta, text)
rev = self.addrevision(text, transaction, link, p1, p2)
return self.node(rev)
def renamed(self, node):
return storageutil.filerevisioncopied(self, node)
def size(self, rev):
"""return the size of a given revision"""
# for revisions with renames, we have to go the slow way
node = self.node(rev)
if self.iscensored(rev):
return 0
if self.renamed(node):
return len(self.read(node))
# XXX if self.read(node).startswith("\1\n"), this returns (size+4)
# XXX See also basefilectx.cmp.
return self._revlog.size(rev)
def cmp(self, node, text):
"""compare text with a given file revision
returns True if text is different than what is stored.
"""
return not storageutil.filedataequivalent(self, node, text)
def verifyintegrity(self, state) -> Iterable[revlog.RevLogProblem]:
return self._revlog.verifyintegrity(state)
def storageinfo(
self,
exclusivefiles=False,
sharedfiles=False,
revisionscount=False,
trackedsize=False,
storedsize=False,
):
return self._revlog.storageinfo(
exclusivefiles=exclusivefiles,
sharedfiles=sharedfiles,
revisionscount=revisionscount,
trackedsize=trackedsize,
storedsize=storedsize,
)
# Used by repo upgrade.
def clone(self, tr, destrevlog, **kwargs):
if not isinstance(destrevlog, filelog):
msg = b'expected filelog to clone(), not %r'
msg %= destrevlog
raise error.ProgrammingError(msg)
return self._revlog.clone(tr, destrevlog._revlog, **kwargs)
filelog = interfaceutil.implementer(repository.ifilestorage)(FileLog)
if typing.TYPE_CHECKING:
filelog = FileLog
class narrowfilelog(filelog):
"""Filelog variation to be used with narrow stores."""
def __init__(self, opener, path, narrowmatch, try_split=False):
super(narrowfilelog, self).__init__(opener, path, try_split=try_split)
self._narrowmatch = narrowmatch
def renamed(self, node):
res = super(narrowfilelog, self).renamed(node)
# Renames that come from outside the narrowspec are problematic
# because we may lack the base text for the rename. This can result
# in code attempting to walk the ancestry or compute a diff
# encountering a missing revision. We address this by silently
# removing rename metadata if the source file is outside the
# narrow spec.
#
# A better solution would be to see if the base revision is available,
# rather than assuming it isn't.
#
# An even better solution would be to teach all consumers of rename
# metadata that the base revision may not be available.
#
# TODO consider better ways of doing this.
if res and not self._narrowmatch(res[0]):
return None
return res
def size(self, rev):
# Because we have a custom renamed() that may lie, we need to call
# the base renamed() to report accurate results.
node = self.node(rev)
if super(narrowfilelog, self).renamed(node):
return len(self.read(node))
else:
return super(narrowfilelog, self).size(rev)
def cmp(self, node, text):
# We don't call `super` because narrow parents can be buggy in case of a
# ambiguous dirstate. Always take the slow path until there is a better
# fix, see issue6150.
# Censored files compare against the empty file.
if self.iscensored(self.rev(node)):
return text != b''
return self.read(node) != text