##// END OF EJS Templates
upstream » mercurial-mirror
RSS

Clone from https://www.mercurial-scm.org/repo/hg-all

branchmap-v3: filter topo heads using node for performance reason...
branchmap-v3: filter topo heads using node for performance reason The branchmap currently contains heads as nodeid. If we build a set of revnum with the topological heads, we need to turn the nodeid in the branchmap to revnum to be able to check if they are topo-heads. That nodeid → revnum lookup is "expensive" and adds up to something noticeable if you do it hundreds of thousand of time. Instead we turn all the topo-heads revnums into nodes and build a set. So we can directly test membership of the nodeids stored in the branchmap. That is much faster. Ideally we would have revnum in the branchmap and could directly test revnum against a revnum set and that would be even faster. However that's an adventure for another time. Without this change, the branchmap format "v3" was significantly slower than the "v2" format. With this changes, some of that gap is recovered With rust + persistent nodemap, this overhead was smaller because the extra lookup did not had to to build the nodemap from scratch. In addition the mozilla-unified repository is able to use the "pure_top" mode of branchmap v3, so it was not really affected by this. Future changeset will work of the remaining of the performance gap. ### benchmark.name = hg.command.unbundle # bin-env-vars.hg.py-re2-module = default # benchmark.variants.issue6528 = disabled # benchmark.variants.resource-usage = default # benchmark.variants.reuse-external-delta-parent = yes # benchmark.variants.revs = any-1-extra-rev # benchmark.variants.source = unbundle # benchmark.variants.validate = default # benchmark.variants.verbosity = quiet ## data-env-vars.name = netbeans-2018-08-01-zstd-sparse-revlog # bin-env-vars.hg.flavor = default branch-v2: 0.233711 ~~~~~ branch-v3 before: 0.380994 (+63.02%, +0.15) branch-v3 after: 0.368769 (+57.79%, +0.14) # bin-env-vars.hg.flavor = rust branch-v2: 0.235230 ~~~~~ branch-v3 before: 0.385060 (+63.70%, +0.15) branch-v3 after: 0.372460 (+58.34%, +0.14) ## data-env-vars.name = netbeans-2018-08-01-ds2-pnm # bin-env-vars.hg.flavor = rust branch-v2: 0.255586 ~~~~~ branch-v3 before: 0.317524 (+24.23%, +0.06) branch-v3 after: 0.318907 (+24.78%, +0.06) ## data-env-vars.name = mozilla-central-2024-03-22-zstd-sparse-revlog # bin-env-vars.hg.flavor = default branch-v2: 0.339010 ~~~~~ branch-v3 before: 0.410007 (+20.94%, +0.07) branch-v3 after: 0.349752 (+3.17%, +0.01) # bin-env-vars.hg.flavor = rust branch-v2: 0.346525 ~~~~~ branch-v3 before: 0.410428 (+18.44%, +0.06) branch-v3 after: 0.354300 (+2.24%, +0.01) ## data-env-vars.name = mozilla-central-2024-03-22-ds2-pnm # bin-env-vars.hg.flavor = rust branch-v2: 0.380202 ~~~~~ branch-v3 before: 0.393871 (+3.60%, +0.01) branch-v3 after: 0.396293 (+4.23%, +0.02) ## data-env-vars.name = mozilla-unified-2024-03-22-zstd-sparse-revlog # bin-env-vars.hg.flavor = default branch-v2: 0.412165 ~~~~~ branch-v3 before: 0.438105 (+6.29%, +0.03) branch-v3 after: 0.424769 (+3.06%, +0.01) # bin-env-vars.hg.flavor = rust branch-v2: 0.412397 ~~~~~ branch-v3 before: 0.438405 (+6.31%, +0.03) branch-v3 after: 0.421796 (+2.28%, +0.01) ## data-env-vars.name = mozilla-unified-2024-03-22-ds2-pnm # bin-env-vars.hg.flavor = rust branch-v2: 0.429501 ~~~~~ branch-v3 before: 0.452692 (+5.40%, +0.02) branch-v3 after: 0.443849 (+3.34%, +0.01) ## data-env-vars.name = mozilla-try-2024-03-26-zstd-sparse-revlog # bin-env-vars.hg.flavor = default branch-v2: 3.403171 ~~~~~ branch-v3 before: 6.562345 (+92.83%, +3.16) branch-v3 after: 6.234055 (+83.18%, +2.83) # bin-env-vars.hg.flavor = rust branch-v2: 3.454876 ~~~~~ branch-v3 before: 6.160248 (+78.31%, +2.71) branch-v3 after: 6.307813 (+82.58%, +2.85) ## data-env-vars.name = mozilla-try-2024-03-26-ds2-pnm # bin-env-vars.hg.flavor = rust branch-v2: 3.465435 ~~~~~ branch-v3 before: 5.381648 (+55.30%, +1.92) branch-v3 after: 5.176076 (+49.36%, +1.71)
marmoute - - Load All Authors

File last commit:

r47667:95a5ed7d default
r52869:41b8892a default
Show More
urls.txt
76 lines | 2.5 KiB | text/plain | TextLexer
/ mercurial / helptext / urls.txt
History | Annotation | Raw |Copy content |Copy permalink
Valid URLs are of the form::
local/filesystem/path[#revision]
file://local/filesystem/path[#revision]
http://[user[:pass]@]host[:port]/[path][#revision]
https://[user[:pass]@]host[:port]/[path][#revision]
ssh://[user@]host[:port]/[path][#revision]
path://pathname
Paths in the local filesystem can either point to Mercurial
repositories or to bundle files (as created by :hg:`bundle` or
:hg:`incoming --bundle`). See also :hg:`help paths`.
An optional identifier after # indicates a particular branch, tag, or
changeset to use from the remote repository. See also :hg:`help
revisions`.
Some features, such as pushing to http:// and https:// URLs are only
possible if the feature is explicitly enabled on the remote Mercurial
server.
Note that the security of HTTPS URLs depends on proper configuration of
web.cacerts.
Some notes about using SSH with Mercurial:
- SSH requires an accessible shell account on the destination machine
and a copy of hg in the remote path or specified with remotecmd.
- path is relative to the remote user's home directory by default. Use
an extra slash at the start of a path to specify an absolute path::
ssh://example.com//tmp/repository
- Mercurial doesn't use its own compression via SSH; the right thing
to do is to configure it in your ~/.ssh/config, e.g.::
Host *.mylocalnetwork.example.com
Compression no
Host *
Compression yes
Alternatively specify "ssh -C" as your ssh command in your
configuration file or with the --ssh command line option.
These URLs can all be stored in your configuration file with path
aliases under the [paths] section like so::
[paths]
alias1 = URL1
alias2 = URL2
...
You can then use the alias for any command that uses a URL (for
example :hg:`pull alias1` will be treated as :hg:`pull URL1`).
Two path aliases are special because they are used as defaults when
you do not provide the URL to a command:
default:
When you create a repository with hg clone, the clone command saves
the location of the source repository as the new repository's
'default' path. This is then used when you omit path from push- and
pull-like commands (including incoming and outgoing).
default-push:
The push command will look for a path named 'default-push', and
prefer it over 'default' if both are defined.
These alias can also be use in the `path://` scheme::
[paths]
alias1 = URL1
alias2 = path://alias1
...
check :hg:`help config.paths` for details about the behavior of such "sub-path".