##// END OF EJS Templates
branchmap-v3: filter topo heads using node for performance reason...
branchmap-v3: filter topo heads using node for performance reason The branchmap currently contains heads as nodeid. If we build a set of revnum with the topological heads, we need to turn the nodeid in the branchmap to revnum to be able to check if they are topo-heads. That nodeid → revnum lookup is "expensive" and adds up to something noticeable if you do it hundreds of thousand of time. Instead we turn all the topo-heads revnums into nodes and build a set. So we can directly test membership of the nodeids stored in the branchmap. That is much faster. Ideally we would have revnum in the branchmap and could directly test revnum against a revnum set and that would be even faster. However that's an adventure for another time. Without this change, the branchmap format "v3" was significantly slower than the "v2" format. With this changes, some of that gap is recovered With rust + persistent nodemap, this overhead was smaller because the extra lookup did not had to to build the nodemap from scratch. In addition the mozilla-unified repository is able to use the "pure_top" mode of branchmap v3, so it was not really affected by this. Future changeset will work of the remaining of the performance gap. ### benchmark.name = hg.command.unbundle # bin-env-vars.hg.py-re2-module = default # benchmark.variants.issue6528 = disabled # benchmark.variants.resource-usage = default # benchmark.variants.reuse-external-delta-parent = yes # benchmark.variants.revs = any-1-extra-rev # benchmark.variants.source = unbundle # benchmark.variants.validate = default # benchmark.variants.verbosity = quiet ## data-env-vars.name = netbeans-2018-08-01-zstd-sparse-revlog # bin-env-vars.hg.flavor = default branch-v2: 0.233711 ~~~~~ branch-v3 before: 0.380994 (+63.02%, +0.15) branch-v3 after: 0.368769 (+57.79%, +0.14) # bin-env-vars.hg.flavor = rust branch-v2: 0.235230 ~~~~~ branch-v3 before: 0.385060 (+63.70%, +0.15) branch-v3 after: 0.372460 (+58.34%, +0.14) ## data-env-vars.name = netbeans-2018-08-01-ds2-pnm # bin-env-vars.hg.flavor = rust branch-v2: 0.255586 ~~~~~ branch-v3 before: 0.317524 (+24.23%, +0.06) branch-v3 after: 0.318907 (+24.78%, +0.06) ## data-env-vars.name = mozilla-central-2024-03-22-zstd-sparse-revlog # bin-env-vars.hg.flavor = default branch-v2: 0.339010 ~~~~~ branch-v3 before: 0.410007 (+20.94%, +0.07) branch-v3 after: 0.349752 (+3.17%, +0.01) # bin-env-vars.hg.flavor = rust branch-v2: 0.346525 ~~~~~ branch-v3 before: 0.410428 (+18.44%, +0.06) branch-v3 after: 0.354300 (+2.24%, +0.01) ## data-env-vars.name = mozilla-central-2024-03-22-ds2-pnm # bin-env-vars.hg.flavor = rust branch-v2: 0.380202 ~~~~~ branch-v3 before: 0.393871 (+3.60%, +0.01) branch-v3 after: 0.396293 (+4.23%, +0.02) ## data-env-vars.name = mozilla-unified-2024-03-22-zstd-sparse-revlog # bin-env-vars.hg.flavor = default branch-v2: 0.412165 ~~~~~ branch-v3 before: 0.438105 (+6.29%, +0.03) branch-v3 after: 0.424769 (+3.06%, +0.01) # bin-env-vars.hg.flavor = rust branch-v2: 0.412397 ~~~~~ branch-v3 before: 0.438405 (+6.31%, +0.03) branch-v3 after: 0.421796 (+2.28%, +0.01) ## data-env-vars.name = mozilla-unified-2024-03-22-ds2-pnm # bin-env-vars.hg.flavor = rust branch-v2: 0.429501 ~~~~~ branch-v3 before: 0.452692 (+5.40%, +0.02) branch-v3 after: 0.443849 (+3.34%, +0.01) ## data-env-vars.name = mozilla-try-2024-03-26-zstd-sparse-revlog # bin-env-vars.hg.flavor = default branch-v2: 3.403171 ~~~~~ branch-v3 before: 6.562345 (+92.83%, +3.16) branch-v3 after: 6.234055 (+83.18%, +2.83) # bin-env-vars.hg.flavor = rust branch-v2: 3.454876 ~~~~~ branch-v3 before: 6.160248 (+78.31%, +2.71) branch-v3 after: 6.307813 (+82.58%, +2.85) ## data-env-vars.name = mozilla-try-2024-03-26-ds2-pnm # bin-env-vars.hg.flavor = rust branch-v2: 3.465435 ~~~~~ branch-v3 before: 5.381648 (+55.30%, +1.92) branch-v3 after: 5.176076 (+49.36%, +1.71)

File last commit:

r52756:f4733654 default
r52869:41b8892a default
Show More
hook.py
371 lines | 12.0 KiB | text/x-python | PythonLexer
# hook.py - hook support for mercurial
#
# Copyright 2007 Olivia Mackall <olivia@selenic.com>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
from __future__ import annotations
import contextlib
import errno
import os
import sys
from .i18n import _
from . import (
demandimport,
encoding,
error,
extensions,
pycompat,
util,
)
from .utils import (
procutil,
resourceutil,
stringutil,
)
def pythonhook(ui, repo, htype, hname, funcname, args, throw):
"""call python hook. hook is callable object, looked up as
name in python module. if callable returns "true", hook
fails, else passes. if hook raises exception, treated as
hook failure. exception propagates if throw is "true".
reason for "true" meaning "hook failed" is so that
unmodified commands (e.g. mercurial.commands.update) can
be run as hooks without wrappers to convert return values."""
if callable(funcname):
obj = funcname
funcname = obj.__module__ + "." + obj.__name__
else:
funcname = pycompat.sysstr(funcname)
d = funcname.rfind('.')
if d == -1:
raise error.HookLoadError(
_(b'%s hook is invalid: "%s" not in a module')
% (hname, stringutil.forcebytestr(funcname))
)
modname = funcname[:d]
oldpaths = sys.path
if resourceutil.mainfrozen():
# binary installs require sys.path manipulation
modpath, modfile = os.path.split(modname)
if modpath and modfile:
sys.path = sys.path[:] + [modpath]
modname = modfile
with demandimport.deactivated():
try:
obj = __import__(pycompat.sysstr(modname))
except (ImportError, SyntaxError):
e1 = sys.exc_info()
try:
# extensions are loaded with hgext_ prefix
obj = __import__("hgext_%s" % pycompat.sysstr(modname))
except (ImportError, SyntaxError):
e2 = sys.exc_info()
if ui.tracebackflag:
ui.warn(
_(
b'exception from first failed import '
b'attempt:\n'
)
)
ui.traceback(e1)
if ui.tracebackflag:
ui.warn(
_(
b'exception from second failed import '
b'attempt:\n'
)
)
ui.traceback(e2)
if not ui.tracebackflag:
tracebackhint = _(
b'run with --traceback for stack trace'
)
else:
tracebackhint = None
msg = _(b'%s hook is invalid: import of "%s" failed')
msg %= (
stringutil.forcebytestr(hname),
stringutil.forcebytestr(modname),
)
raise error.HookLoadError(msg, hint=tracebackhint)
sys.path = oldpaths
try:
for p in funcname.split('.')[1:]:
obj = getattr(obj, p)
except AttributeError:
raise error.HookLoadError(
_(b'%s hook is invalid: "%s" is not defined')
% (hname, stringutil.forcebytestr(funcname))
)
if not callable(obj):
raise error.HookLoadError(
_(b'%s hook is invalid: "%s" is not callable')
% (hname, stringutil.forcebytestr(funcname))
)
ui.note(
_(b"calling hook %s: %s\n") % (hname, stringutil.forcebytestr(funcname))
)
starttime = util.timer()
try:
r = obj(ui=ui, repo=repo, hooktype=htype, **pycompat.strkwargs(args))
except Exception as exc:
if isinstance(exc, error.Abort):
ui.warn(_(b'error: %s hook failed: %s\n') % (hname, exc.args[0]))
else:
ui.warn(
_(b'error: %s hook raised an exception: %s\n')
% (hname, stringutil.forcebytestr(exc))
)
if throw:
raise
if not ui.tracebackflag:
ui.warn(_(b'(run with --traceback for stack trace)\n'))
ui.traceback()
return True, True
finally:
duration = util.timer() - starttime
ui.log(
b'pythonhook',
b'pythonhook-%s: %s finished in %0.2f seconds\n',
htype,
stringutil.forcebytestr(funcname),
duration,
)
if r:
if throw:
raise error.HookAbort(_(b'%s hook failed') % hname)
ui.warn(_(b'warning: %s hook failed\n') % hname)
return r, False
def _exthook(ui, repo, htype, name, cmd, args, throw):
starttime = util.timer()
env = {}
# make in-memory changes visible to external process
if repo is not None:
tr = repo.currenttransaction()
repo.dirstate.write(tr)
if tr and tr.writepending():
env[b'HG_PENDING'] = repo.root
env[b'HG_HOOKTYPE'] = htype
env[b'HG_HOOKNAME'] = name
if ui.config(b'hooks', b'%s:run-with-plain' % name) == b'auto':
plain = ui.plain()
else:
plain = ui.configbool(b'hooks', b'%s:run-with-plain' % name)
if plain:
env[b'HGPLAIN'] = b'1'
else:
env[b'HGPLAIN'] = b''
for k, v in args.items():
# transaction changes can accumulate MBs of data, so skip it
# for external hooks
if k == b'changes':
continue
if callable(v):
v = v()
if isinstance(v, (dict, list)):
v = stringutil.pprint(v)
env[b'HG_' + k.upper()] = v
if ui.configbool(b'hooks', b'tonative.%s' % name, False):
oldcmd = cmd
cmd = procutil.shelltonative(cmd, env)
if cmd != oldcmd:
ui.note(_(b'converting hook "%s" to native\n') % name)
ui.note(_(b"running hook %s: %s\n") % (name, cmd))
if repo:
cwd = repo.root
else:
cwd = encoding.getcwd()
r = ui.system(cmd, environ=env, cwd=cwd, blockedtag=b'exthook-%s' % (name,))
if repo is not None and repo.currentwlock() is None:
repo.invalidatedirstate()
if repo is not None and repo.currentlock() is None:
repo.invalidate()
duration = util.timer() - starttime
ui.log(
b'exthook',
b'exthook-%s: %s finished in %0.2f seconds\n',
name,
cmd,
duration,
)
if r:
desc = procutil.explainexit(r)
if throw:
raise error.HookAbort(_(b'%s hook %s') % (name, desc))
ui.warn(_(b'warning: %s hook %s\n') % (name, desc))
return r
# represent an untrusted hook command
_fromuntrusted = object()
def _allhooks(ui):
"""return a list of (hook-id, cmd) pairs sorted by priority"""
hooks = _hookitems(ui)
# Be careful in this section, propagating the real commands from untrusted
# sources would create a security vulnerability, make sure anything altered
# in that section uses "_fromuntrusted" as its command.
untrustedhooks = _hookitems(ui, _untrusted=True)
for name, value in untrustedhooks.items():
trustedvalue = hooks.get(name, ((), (), name, _fromuntrusted))
if value != trustedvalue:
(lp, lo, lk, lv) = trustedvalue
hooks[name] = (lp, lo, lk, _fromuntrusted)
# (end of the security sensitive section)
return [(k, v) for p, o, k, v in sorted(hooks.values())]
def _hookitems(ui, _untrusted=False):
"""return all hooks items ready to be sorted"""
hooks = {}
for name, cmd in ui.configitems(b'hooks', untrusted=_untrusted):
if (
name.startswith(b'priority.')
or name.startswith(b'tonative.')
or b':' in name
):
continue
priority = ui.configint(b'hooks', b'priority.%s' % name, 0)
hooks[name] = ((-priority,), (len(hooks),), name, cmd)
return hooks
_redirect = False
def redirect(state):
global _redirect
_redirect = state
def hashook(ui, htype):
"""return True if a hook is configured for 'htype'"""
if not ui.callhooks:
return False
for hname, cmd in _allhooks(ui):
if hname.split(b'.')[0] == htype and cmd:
return True
return False
def hook(ui, repo, htype, throw=False, **args):
if not ui.callhooks:
return False
hooks = []
for hname, cmd in _allhooks(ui):
if hname.split(b'.')[0] == htype and cmd:
hooks.append((hname, cmd))
res = runhooks(ui, repo, htype, hooks, throw=throw, **args)
r = False
for hname, cmd in hooks:
r = res[hname][0] or r
return r
@contextlib.contextmanager
def redirect_stdio():
"""Redirects stdout to stderr, if possible."""
oldstdout = -1
try:
if _redirect:
try:
stdoutno = procutil.stdout.fileno()
stderrno = procutil.stderr.fileno()
# temporarily redirect stdout to stderr, if possible
if stdoutno >= 0 and stderrno >= 0:
procutil.stdout.flush()
oldstdout = os.dup(stdoutno)
os.dup2(stderrno, stdoutno)
except (OSError, AttributeError):
# files seem to be bogus, give up on redirecting (WSGI, etc)
pass
yield
finally:
# The stderr is fully buffered on Windows when connected to a pipe.
# A forcible flush is required to make small stderr data in the
# remote side available to the client immediately.
try:
procutil.stderr.flush()
except IOError as err:
if err.errno not in (errno.EPIPE, errno.EIO, errno.EBADF):
raise error.StdioError(err)
if _redirect and oldstdout >= 0:
try:
procutil.stdout.flush() # write hook output to stderr fd
except IOError as err:
if err.errno not in (errno.EPIPE, errno.EIO, errno.EBADF):
raise error.StdioError(err)
os.dup2(oldstdout, stdoutno)
os.close(oldstdout)
def runhooks(ui, repo, htype, hooks, throw=False, **args):
args = pycompat.byteskwargs(args)
res = {}
with redirect_stdio():
for hname, cmd in hooks:
if cmd is _fromuntrusted:
if throw:
raise error.HookAbort(
_(b'untrusted hook %s not executed') % hname,
hint=_(b"see 'hg help config.trusted'"),
)
ui.warn(_(b'warning: untrusted hook %s not executed\n') % hname)
r = 1
raised = False
elif callable(cmd):
r, raised = pythonhook(ui, repo, htype, hname, cmd, args, throw)
elif cmd.startswith(b'python:'):
if cmd.count(b':') >= 2:
path, cmd = cmd[7:].rsplit(b':', 1)
path = util.expandpath(path)
if repo:
path = os.path.join(repo.root, path)
try:
mod_name = 'hghook.%s' % pycompat.sysstr(hname)
mod = extensions.loadpath(path, mod_name)
except Exception:
ui.write(_(b"loading %s hook failed:\n") % hname)
raise
hookfn = getattr(mod, pycompat.sysstr(cmd))
else:
hookfn = cmd[7:].strip()
r, raised = pythonhook(
ui, repo, htype, hname, hookfn, args, throw
)
else:
r = _exthook(ui, repo, htype, hname, cmd, args, throw)
raised = False
res[hname] = r, raised
return res