##// END OF EJS Templates
upstream » mercurial-mirror
RSS

Clone from https://www.mercurial-scm.org/repo/hg-all

branchmap-v3: filter topo heads using node for performance reason...
branchmap-v3: filter topo heads using node for performance reason The branchmap currently contains heads as nodeid. If we build a set of revnum with the topological heads, we need to turn the nodeid in the branchmap to revnum to be able to check if they are topo-heads. That nodeid → revnum lookup is "expensive" and adds up to something noticeable if you do it hundreds of thousand of time. Instead we turn all the topo-heads revnums into nodes and build a set. So we can directly test membership of the nodeids stored in the branchmap. That is much faster. Ideally we would have revnum in the branchmap and could directly test revnum against a revnum set and that would be even faster. However that's an adventure for another time. Without this change, the branchmap format "v3" was significantly slower than the "v2" format. With this changes, some of that gap is recovered With rust + persistent nodemap, this overhead was smaller because the extra lookup did not had to to build the nodemap from scratch. In addition the mozilla-unified repository is able to use the "pure_top" mode of branchmap v3, so it was not really affected by this. Future changeset will work of the remaining of the performance gap. ### benchmark.name = hg.command.unbundle # bin-env-vars.hg.py-re2-module = default # benchmark.variants.issue6528 = disabled # benchmark.variants.resource-usage = default # benchmark.variants.reuse-external-delta-parent = yes # benchmark.variants.revs = any-1-extra-rev # benchmark.variants.source = unbundle # benchmark.variants.validate = default # benchmark.variants.verbosity = quiet ## data-env-vars.name = netbeans-2018-08-01-zstd-sparse-revlog # bin-env-vars.hg.flavor = default branch-v2: 0.233711 ~~~~~ branch-v3 before: 0.380994 (+63.02%, +0.15) branch-v3 after: 0.368769 (+57.79%, +0.14) # bin-env-vars.hg.flavor = rust branch-v2: 0.235230 ~~~~~ branch-v3 before: 0.385060 (+63.70%, +0.15) branch-v3 after: 0.372460 (+58.34%, +0.14) ## data-env-vars.name = netbeans-2018-08-01-ds2-pnm # bin-env-vars.hg.flavor = rust branch-v2: 0.255586 ~~~~~ branch-v3 before: 0.317524 (+24.23%, +0.06) branch-v3 after: 0.318907 (+24.78%, +0.06) ## data-env-vars.name = mozilla-central-2024-03-22-zstd-sparse-revlog # bin-env-vars.hg.flavor = default branch-v2: 0.339010 ~~~~~ branch-v3 before: 0.410007 (+20.94%, +0.07) branch-v3 after: 0.349752 (+3.17%, +0.01) # bin-env-vars.hg.flavor = rust branch-v2: 0.346525 ~~~~~ branch-v3 before: 0.410428 (+18.44%, +0.06) branch-v3 after: 0.354300 (+2.24%, +0.01) ## data-env-vars.name = mozilla-central-2024-03-22-ds2-pnm # bin-env-vars.hg.flavor = rust branch-v2: 0.380202 ~~~~~ branch-v3 before: 0.393871 (+3.60%, +0.01) branch-v3 after: 0.396293 (+4.23%, +0.02) ## data-env-vars.name = mozilla-unified-2024-03-22-zstd-sparse-revlog # bin-env-vars.hg.flavor = default branch-v2: 0.412165 ~~~~~ branch-v3 before: 0.438105 (+6.29%, +0.03) branch-v3 after: 0.424769 (+3.06%, +0.01) # bin-env-vars.hg.flavor = rust branch-v2: 0.412397 ~~~~~ branch-v3 before: 0.438405 (+6.31%, +0.03) branch-v3 after: 0.421796 (+2.28%, +0.01) ## data-env-vars.name = mozilla-unified-2024-03-22-ds2-pnm # bin-env-vars.hg.flavor = rust branch-v2: 0.429501 ~~~~~ branch-v3 before: 0.452692 (+5.40%, +0.02) branch-v3 after: 0.443849 (+3.34%, +0.01) ## data-env-vars.name = mozilla-try-2024-03-26-zstd-sparse-revlog # bin-env-vars.hg.flavor = default branch-v2: 3.403171 ~~~~~ branch-v3 before: 6.562345 (+92.83%, +3.16) branch-v3 after: 6.234055 (+83.18%, +2.83) # bin-env-vars.hg.flavor = rust branch-v2: 3.454876 ~~~~~ branch-v3 before: 6.160248 (+78.31%, +2.71) branch-v3 after: 6.307813 (+82.58%, +2.85) ## data-env-vars.name = mozilla-try-2024-03-26-ds2-pnm # bin-env-vars.hg.flavor = rust branch-v2: 3.465435 ~~~~~ branch-v3 before: 5.381648 (+55.30%, +1.92) branch-v3 after: 5.176076 (+49.36%, +1.71)
Matt Harbison - - Load All Authors

File last commit:

r52756:f4733654 default
r52869:41b8892a default
Show More
node.py
61 lines | 1.8 KiB | text/x-python | PythonLexer
/ mercurial / node.py
History | Annotation | Raw |Copy content |Copy permalink
# node.py - basic nodeid manipulation for mercurial
#
# Copyright 2005, 2006 Olivia Mackall <olivia@selenic.com>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
from __future__ import annotations
import binascii
# This ugly style has a noticeable effect in manifest parsing
hex = binascii.hexlify
bin = binascii.unhexlify
def short(node):
return hex(node[:6])
nullrev = -1
# pseudo identifier for working directory
# (experimental, so don't add too many dependencies on it)
wdirrev = 0x7FFFFFFF
class sha1nodeconstants:
nodelen = 20
# In hex, this is '0000000000000000000000000000000000000000'
nullid = b"\0" * nodelen
nullhex = hex(nullid)
# Phony node value to stand-in for new files in some uses of
# manifests.
# In hex, this is '2121212121212121212121212121212121212121'
newnodeid = b'!!!!!!!!!!!!!!!!!!!!'
# In hex, this is '3030303030303030303030303030306164646564'
addednodeid = b'000000000000000added'
# In hex, this is '3030303030303030303030306d6f646966696564'
modifiednodeid = b'000000000000modified'
wdirfilenodeids = {newnodeid, addednodeid, modifiednodeid}
# pseudo identifier for working directory
# (experimental, so don't add too many dependencies on it)
# In hex, this is 'ffffffffffffffffffffffffffffffffffffffff'
wdirid = b"\xff" * nodelen
wdirhex = hex(wdirid)
# legacy starting point for porting modules
nullid = sha1nodeconstants.nullid
nullhex = sha1nodeconstants.nullhex
newnodeid = sha1nodeconstants.newnodeid
addednodeid = sha1nodeconstants.addednodeid
modifiednodeid = sha1nodeconstants.modifiednodeid
wdirfilenodeids = sha1nodeconstants.wdirfilenodeids
wdirid = sha1nodeconstants.wdirid
wdirhex = sha1nodeconstants.wdirhex