##// END OF EJS Templates
wireproto: separate commands tables for version 1 and 2 commands...
wireproto: separate commands tables for version 1 and 2 commands We can't easily reuse existing command handlers for version 2 commands because the response types will be different. e.g. many commands return nodes encoded as hex. Our new wire protocol is binary safe, so we'll wish to encode nodes as binary. We /could/ teach each command handler to look at the protocol handler and change behavior based on the version in use. However, this would make logic a bit unwieldy over time and would make it harder to design a unified protocol handler interface. I think it's better to create a clean break between version 1 and version 2 of commands on the server. What I imagine happening is we will have separate @wireprotocommand functions for each protocol generation. Those functions will parse the request, dispatch to a common function to process it, then generate the response in its own, transport-specific manner. This commit establishes a separate table for tracking version 1 commands from version 2 commands. The HTTP server pieces have been updated to use this new table. Most commands are marked as both version 1 and version 2, so there is little practical impact to this change. A side-effect of this change is we now rely on transport registration in wireprototypes.TRANSPORTS and certain properties of the protocol interface. So a test had to be updated to conform. Differential Revision: https://phab.mercurial-scm.org/D2982

File last commit:

r36891:16499427 default
r37311:45b39c69 default
Show More
archival.py
342 lines | 10.7 KiB | text/x-python | PythonLexer
# archival.py - revision archival for mercurial
#
# Copyright 2006 Vadim Gelfer <vadim.gelfer@gmail.com>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
from __future__ import absolute_import
import gzip
import os
import struct
import tarfile
import time
import zipfile
import zlib
from .i18n import _
from . import (
error,
formatter,
match as matchmod,
pycompat,
scmutil,
util,
vfs as vfsmod,
)
stringio = util.stringio
# from unzip source code:
_UNX_IFREG = 0x8000
_UNX_IFLNK = 0xa000
def tidyprefix(dest, kind, prefix):
'''choose prefix to use for names in archive. make sure prefix is
safe for consumers.'''
if prefix:
prefix = util.normpath(prefix)
else:
if not isinstance(dest, bytes):
raise ValueError('dest must be string if no prefix')
prefix = os.path.basename(dest)
lower = prefix.lower()
for sfx in exts.get(kind, []):
if lower.endswith(sfx):
prefix = prefix[:-len(sfx)]
break
lpfx = os.path.normpath(util.localpath(prefix))
prefix = util.pconvert(lpfx)
if not prefix.endswith('/'):
prefix += '/'
# Drop the leading '.' path component if present, so Windows can read the
# zip files (issue4634)
if prefix.startswith('./'):
prefix = prefix[2:]
if prefix.startswith('../') or os.path.isabs(lpfx) or '/../' in prefix:
raise error.Abort(_('archive prefix contains illegal components'))
return prefix
exts = {
'tar': ['.tar'],
'tbz2': ['.tbz2', '.tar.bz2'],
'tgz': ['.tgz', '.tar.gz'],
'zip': ['.zip'],
}
def guesskind(dest):
for kind, extensions in exts.iteritems():
if any(dest.endswith(ext) for ext in extensions):
return kind
return None
def _rootctx(repo):
# repo[0] may be hidden
for rev in repo:
return repo[rev]
return repo['null']
# {tags} on ctx includes local tags and 'tip', with no current way to limit
# that to global tags. Therefore, use {latesttag} as a substitute when
# the distance is 0, since that will be the list of global tags on ctx.
_defaultmetatemplate = br'''
repo: {root}
node: {ifcontains(rev, revset("wdir()"), "{p1node}{dirty}", "{node}")}
branch: {branch|utf8}
{ifeq(latesttagdistance, 0, join(latesttag % "tag: {tag}", "\n"),
separate("\n",
join(latesttag % "latesttag: {tag}", "\n"),
"latesttagdistance: {latesttagdistance}",
"changessincelatesttag: {changessincelatesttag}"))}
'''[1:] # drop leading '\n'
def buildmetadata(ctx):
'''build content of .hg_archival.txt'''
repo = ctx.repo()
opts = {
'template': repo.ui.config('experimental', 'archivemetatemplate',
_defaultmetatemplate)
}
out = util.stringio()
fm = formatter.formatter(repo.ui, out, 'archive', opts)
fm.startitem()
fm.context(ctx=ctx)
fm.data(root=_rootctx(repo).hex())
if ctx.rev() is None:
dirty = ''
if ctx.dirty(missing=True):
dirty = '+'
fm.data(dirty=dirty)
fm.end()
return out.getvalue()
class tarit(object):
'''write archive to tar file or stream. can write uncompressed,
or compress with gzip or bzip2.'''
class GzipFileWithTime(gzip.GzipFile):
def __init__(self, *args, **kw):
timestamp = None
if r'timestamp' in kw:
timestamp = kw.pop(r'timestamp')
if timestamp is None:
self.timestamp = time.time()
else:
self.timestamp = timestamp
gzip.GzipFile.__init__(self, *args, **kw)
def _write_gzip_header(self):
self.fileobj.write('\037\213') # magic header
self.fileobj.write('\010') # compression method
fname = self.name
if fname and fname.endswith('.gz'):
fname = fname[:-3]
flags = 0
if fname:
flags = gzip.FNAME
self.fileobj.write(pycompat.bytechr(flags))
gzip.write32u(self.fileobj, int(self.timestamp))
self.fileobj.write('\002')
self.fileobj.write('\377')
if fname:
self.fileobj.write(fname + '\000')
def __init__(self, dest, mtime, kind=''):
self.mtime = mtime
self.fileobj = None
def taropen(mode, name='', fileobj=None):
if kind == 'gz':
mode = mode[0:1]
if not fileobj:
fileobj = open(name, mode + 'b')
gzfileobj = self.GzipFileWithTime(name,
pycompat.sysstr(mode + 'b'),
zlib.Z_BEST_COMPRESSION,
fileobj, timestamp=mtime)
self.fileobj = gzfileobj
return tarfile.TarFile.taropen(
name, pycompat.sysstr(mode), gzfileobj)
else:
return tarfile.open(
name, pycompat.sysstr(mode + kind), fileobj)
if isinstance(dest, bytes):
self.z = taropen('w:', name=dest)
else:
self.z = taropen('w|', fileobj=dest)
def addfile(self, name, mode, islink, data):
name = pycompat.fsdecode(name)
i = tarfile.TarInfo(name)
i.mtime = self.mtime
i.size = len(data)
if islink:
i.type = tarfile.SYMTYPE
i.mode = 0o777
i.linkname = pycompat.fsdecode(data)
data = None
i.size = 0
else:
i.mode = mode
data = stringio(data)
self.z.addfile(i, data)
def done(self):
self.z.close()
if self.fileobj:
self.fileobj.close()
class zipit(object):
'''write archive to zip file or stream. can write uncompressed,
or compressed with deflate.'''
def __init__(self, dest, mtime, compress=True):
self.z = zipfile.ZipFile(pycompat.fsdecode(dest), r'w',
compress and zipfile.ZIP_DEFLATED or
zipfile.ZIP_STORED)
# Python's zipfile module emits deprecation warnings if we try
# to store files with a date before 1980.
epoch = 315532800 # calendar.timegm((1980, 1, 1, 0, 0, 0, 1, 1, 0))
if mtime < epoch:
mtime = epoch
self.mtime = mtime
self.date_time = time.gmtime(mtime)[:6]
def addfile(self, name, mode, islink, data):
i = zipfile.ZipInfo(pycompat.fsdecode(name), self.date_time)
i.compress_type = self.z.compression
# unzip will not honor unix file modes unless file creator is
# set to unix (id 3).
i.create_system = 3
ftype = _UNX_IFREG
if islink:
mode = 0o777
ftype = _UNX_IFLNK
i.external_attr = (mode | ftype) << 16
# add "extended-timestamp" extra block, because zip archives
# without this will be extracted with unexpected timestamp,
# if TZ is not configured as GMT
i.extra += struct.pack('<hhBl',
0x5455, # block type: "extended-timestamp"
1 + 4, # size of this block
1, # "modification time is present"
int(self.mtime)) # last modification (UTC)
self.z.writestr(i, data)
def done(self):
self.z.close()
class fileit(object):
'''write archive as files in directory.'''
def __init__(self, name, mtime):
self.basedir = name
self.opener = vfsmod.vfs(self.basedir)
self.mtime = mtime
def addfile(self, name, mode, islink, data):
if islink:
self.opener.symlink(data, name)
return
f = self.opener(name, "w", atomictemp=False)
f.write(data)
f.close()
destfile = os.path.join(self.basedir, name)
os.chmod(destfile, mode)
if self.mtime is not None:
os.utime(destfile, (self.mtime, self.mtime))
def done(self):
pass
archivers = {
'files': fileit,
'tar': tarit,
'tbz2': lambda name, mtime: tarit(name, mtime, 'bz2'),
'tgz': lambda name, mtime: tarit(name, mtime, 'gz'),
'uzip': lambda name, mtime: zipit(name, mtime, False),
'zip': zipit,
}
def archive(repo, dest, node, kind, decode=True, matchfn=None,
prefix='', mtime=None, subrepos=False):
'''create archive of repo as it was at node.
dest can be name of directory, name of archive file, or file
object to write archive to.
kind is type of archive to create.
decode tells whether to put files through decode filters from
hgrc.
matchfn is function to filter names of files to write to archive.
prefix is name of path to put before every archive member.
mtime is the modified time, in seconds, or None to use the changeset time.
subrepos tells whether to include subrepos.
'''
if kind == 'files':
if prefix:
raise error.Abort(_('cannot give prefix when archiving to files'))
else:
prefix = tidyprefix(dest, kind, prefix)
def write(name, mode, islink, getdata):
data = getdata()
if decode:
data = repo.wwritedata(name, data)
archiver.addfile(prefix + name, mode, islink, data)
if kind not in archivers:
raise error.Abort(_("unknown archive type '%s'") % kind)
ctx = repo[node]
archiver = archivers[kind](dest, mtime or ctx.date()[0])
if repo.ui.configbool("ui", "archivemeta"):
name = '.hg_archival.txt'
if not matchfn or matchfn(name):
write(name, 0o644, False, lambda: buildmetadata(ctx))
if matchfn:
files = [f for f in ctx.manifest().keys() if matchfn(f)]
else:
files = ctx.manifest().keys()
total = len(files)
if total:
files.sort()
scmutil.fileprefetchhooks(repo, ctx, files)
repo.ui.progress(_('archiving'), 0, unit=_('files'), total=total)
for i, f in enumerate(files):
ff = ctx.flags(f)
write(f, 'x' in ff and 0o755 or 0o644, 'l' in ff, ctx[f].data)
repo.ui.progress(_('archiving'), i + 1, item=f,
unit=_('files'), total=total)
repo.ui.progress(_('archiving'), None)
if subrepos:
for subpath in sorted(ctx.substate):
sub = ctx.workingsub(subpath)
submatch = matchmod.subdirmatcher(subpath, matchfn)
total += sub.archive(archiver, prefix, submatch, decode)
if total == 0:
raise error.Abort(_('no files match the archive pattern'))
archiver.done()
return total