##// END OF EJS Templates
deltas: set estimated compression upper bound to "3x" instead of "10x"...
deltas: set estimated compression upper bound to "3x" instead of "10x" In pratice, we very rarely observer compression better than "3x" on manifest deltas. Having a more aggressive estimate significantly helps our pathological use case on a private repository. Here are a comparison of timings using different upper bound. Estimated compression | ø | ×10 | ×5 | ×3 | timing | 14.11 | 2.61 | 1.96 | 1.53 | We also tested the impact of this series on an array of public repositories. This shown no impact in either size nor timing. Full data set below for those interested. Size ---- Regarding size, not significant impact have been noticed on neither public nor private repositories. Here are the number we gathered on public repositories: zlib/upperbound | no | 10x | 5x | 3x mercurial | 5 875 730 | 5 875 730 | 5 875 730 | 5 875 730 pypy | 27 782 913 | 27 782 913 | 27 782 913 | 27 782 913 netbeans | 159 161 207 | 159 161 207 | 159 161 207 | 159 959 879 (+0.5%) mozilla-central | 323 841 642 | 323 841 642 | 323 841 642 | 319 867 519 (-2.5%) mozilla-try | 746 649 123 | 746 649 123 | 746 649 123 | 741 155 568 (-0.7%) private-repo | 1 485 287 294 | 1 485 287 294 | 1 485 287 294 | 1 409 248 382 (-5.1%) zstd/upperbound | no | 10x | 5x | 3x mercurial | 5 895 206 | 5 895 206 | 5 895 206 | 5 895 206 pypy | 28 689 230 | 28 689 230 | 28 689 230 | 28 689 230 netbeans | 157 636 387 | 157 636 387 | 157 636 387 | 159 692 678 (+1.3%) mozilla-central | 317 650 281 | 317 650 281 | 317 650 281 | 319 613 603 (+0.6%) mozilla-try | 737 555 275 | 737 555 275 | 737 555 275 | 738 079 473 (+0.1%) private-repo | 1 352 362 982 | 1 352 362 982 | 1 346 961 880 | 1 361 327 384 (+0.7%) Speed ------ Timing gathered using `hg perfrevlogwrite -m`. Value are in seconds. mercurial zlib | no | 10x | 5x | 3x | total | 65.551783 | 65.388887 | 65.260658 | 65.321199 | max | 0.034544 | 0.034571 | 0.034659 | 0.034521 | 99.99% | 0.034544 | 0.034571 | 0.034659 | 0.034521 | zstd | no | 10x | 5x | 3x | total | 49.118449 | 49.054062 | 48.753588 | 48.740230 | max | 0.009338 | 0.009239 | 0.009202 | 0.009178 | 99.99% | 0.007618 | 0.007639 | 0.007626 | 0.007621 | pypy zlib | no | 10x | 5x | 3x | total | 560.865984 | 558.983817 | 559.083815 | 559.349152 | max | 0.219614 | 0.215922 | 0.218112 | 0.218107 | 99.99% | 0.219614 | 0.215922 | 0.218112 | 0.218107 | zstd | no | 10x | 5x | 3x | total | 349.393280 | 347.395819 | 347.185407 | 345.643985 | max | 0.084143 | 0.083536 | 0.081834 | 0.082178 | 99.99% | 0.039445 | 0.039639 | 0.039612 | 0.039175 | netbeans zlib | no | 10x | 5x | 3x | total | 33103.327727 | 33314.932260 | 33211.745233 | 33345.891778 | max | 2.666852 | 2.672059 | 2.662453 | 2.662936 | 99.99% | 2.058772 | 2.070429 | 2.069569 | 2.064653 | zstd | no | 10x | 5x | 3x | total | 20112.102708 | 20095.879719 | 20083.390300 | 20123.221859 | max | 2.063482 | 2.062851 | 2.065229 | 2.060147 | 99.99% | 1.146647 | 1.143794 | 1.142933 | 1.146529 | mozilla zlib | no | 10x | 5x | 3x | total | 41374.102138 | 41418.816773 | 41381.956370 | 41334.280732 | max | 3.383474 | 3.387400 | 3.405711 | 3.387316 | 99.99% | 1.006755 | 1.005954 | 1.007700 | 1.007373 | zstd | no | 10x | 5x | 3x | total | 24689.691520 | 24643.939662 | 24664.630027 | 24664.512714 | max | 1.460822 | 1.449640 | 1.439747 | 1.465304 | 99.99% | 0.527111 | 0.527377 | 0.527807 | 0.527226 |

File last commit:

r39851:c31ce080 default
r42669:4a3abb33 default
Show More
factotum.py
151 lines | 4.8 KiB | text/x-python | PythonLexer
# factotum.py - Plan 9 factotum integration for Mercurial
#
# Copyright (C) 2012 Steven Stallion <sstallion@gmail.com>
#
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the
# Free Software Foundation; either version 2 of the License, or (at your
# option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
# You should have received a copy of the GNU General Public License along
# with this program; if not, write to the Free Software Foundation, Inc.,
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
'''http authentication with factotum
This extension allows the factotum(4) facility on Plan 9 from Bell Labs
platforms to provide authentication information for HTTP access. Configuration
entries specified in the auth section as well as authentication information
provided in the repository URL are fully supported. If no prefix is specified,
a value of "*" will be assumed.
By default, keys are specified as::
proto=pass service=hg prefix=<prefix> user=<username> !password=<password>
If the factotum extension is unable to read the required key, one will be
requested interactively.
A configuration section is available to customize runtime behavior. By
default, these entries are::
[factotum]
executable = /bin/auth/factotum
mountpoint = /mnt/factotum
service = hg
The executable entry defines the full path to the factotum binary. The
mountpoint entry defines the path to the factotum file service. Lastly, the
service entry controls the service name used when reading keys.
'''
from __future__ import absolute_import
import os
from mercurial.i18n import _
from mercurial.utils import (
procutil,
)
from mercurial import (
error,
httpconnection,
registrar,
url,
util,
)
urlreq = util.urlreq
passwordmgr = url.passwordmgr
ERRMAX = 128
_executable = _mountpoint = _service = None
configtable = {}
configitem = registrar.configitem(configtable)
configitem('factotum', 'executable',
default='/bin/auth/factotum',
)
configitem('factotum', 'mountpoint',
default='/mnt/factotum',
)
configitem('factotum', 'service',
default='hg',
)
def auth_getkey(self, params):
if not self.ui.interactive():
raise error.Abort(_('factotum not interactive'))
if 'user=' not in params:
params = '%s user?' % params
params = '%s !password?' % params
os.system(procutil.tonativestr("%s -g '%s'" % (_executable, params)))
def auth_getuserpasswd(self, getkey, params):
params = 'proto=pass %s' % params
while True:
fd = os.open('%s/rpc' % _mountpoint, os.O_RDWR)
try:
os.write(fd, 'start %s' % params)
l = os.read(fd, ERRMAX).split()
if l[0] == 'ok':
os.write(fd, 'read')
status, user, passwd = os.read(fd, ERRMAX).split(None, 2)
if status == 'ok':
if passwd.startswith("'"):
if passwd.endswith("'"):
passwd = passwd[1:-1].replace("''", "'")
else:
raise error.Abort(_('malformed password string'))
return (user, passwd)
except (OSError, IOError):
raise error.Abort(_('factotum not responding'))
finally:
os.close(fd)
getkey(self, params)
def monkeypatch_method(cls):
def decorator(func):
setattr(cls, func.__name__, func)
return func
return decorator
@monkeypatch_method(passwordmgr)
def find_user_password(self, realm, authuri):
user, passwd = self.passwddb.find_user_password(realm, authuri)
if user and passwd:
self._writedebug(user, passwd)
return (user, passwd)
prefix = ''
res = httpconnection.readauthforuri(self.ui, authuri, user)
if res:
_, auth = res
prefix = auth.get('prefix')
user, passwd = auth.get('username'), auth.get('password')
if not user or not passwd:
if not prefix:
prefix = realm.split(' ')[0].lower()
params = 'service=%s prefix=%s' % (_service, prefix)
if user:
params = '%s user=%s' % (params, user)
user, passwd = auth_getuserpasswd(self, auth_getkey, params)
self.add_password(realm, authuri, user, passwd)
self._writedebug(user, passwd)
return (user, passwd)
def uisetup(ui):
global _executable
_executable = ui.config('factotum', 'executable')
global _mountpoint
_mountpoint = ui.config('factotum', 'mountpoint')
global _service
_service = ui.config('factotum', 'service')