##// END OF EJS Templates
copies: calculate mergecopies() based on pathcopies()...
copies: calculate mergecopies() based on pathcopies() When copies are stored in changesets, we need a changeset-centric version of mergecopies() just like we have a changeset-centric version of pathcopies(). I think the natural way of thinking about mergecopies() is in terms of pathcopies() from the base to each of the commits. So if we can rewrite mergecopies() based on two such pathcopies() calls, we'll get the changeset-centric version for free. That's what this patch does. A nice bonus is that it ends up being a lot simpler. mergecopies() has accumulated a lot of technical debt over time. One good example is the code for dealing with grafts (the "partial/incomplete/dirty" stuff). Since pathcopies() already deals with backwards renames and ping-pong renames, we get that for free. I've run tests with hard-coded debug logging for "fullcopy" and while I haven't looked at every difference it produces, all the ones I have looked at seemed reasonable to me. I'm a little surprised that no more tests fail when run with '--extra-config-opt experimental.copies.read-from=compatibility' compared to before this patch. This patch also fixes the broken cases in test-annotate.t and test-fastannotate.t. It also enables the part of test-copies.t that was previously disabled exactly because mergecopies() needed to get a changeset-centric version. One drawback of the rewritten code is that we may now make remotefilelog prefetch more files. We used to prefetch files that were unique to either side of the merge compared to the other. We now prefetch files that are unique to either side of the merge compared to the base. This means that if you added the same file to each side, we would not prefetch it before, but we would now. Such cases are probably quite rare, but one likely scenario where they happen is when moving from a commit to its successor (or the other way around). The user will probably already have the files in the cache in such cases, so it's probably not a big deal. Some timings for calculating mergecopies between two revisions (revisions shown on each line, all using the common ancestor as base): In the hg repo: 4.8 4.9: 0.21s -> 0.21s 4.0 4.8: 0.35s -> 0.63s In and old copy of the mozilla-unified repo: FIREFOX_BETA_60_BASE^ FIREFOX_BETA_60_BASE: 0.82s -> 0.82s FIREFOX_NIGHTLY_59_END FIREFOX_BETA_60_BASE: 2.5s -> 2.6s FIREFOX_BETA_59_END FIREFOX_BETA_60_BASE: 3.9s -> 4.1s FIREFOX_AURORA_50_BASE FIREFOX_BETA_60_BASE: 31s -> 33s So it's measurably slower in most cases. The most significant difference is in the hg repo between revisions 4.0 and 4.8. In that case it seems to come from the fact that pathcopies() uses fctx.isintroducedafter() (in _tracefile), while the old mergecopies() used fctx.linkrev() (in _checkcopies()). That results in a single call to filectx._adjustlinkrev(), which is responsible for the entire difference in time (in my repo). So we pay a performance penalty but we get more correct code (see change in test-mv-cp-st-diff.t). Deleting the "== f.filenode()" in _tracefile() recovers the lost performance in the hg repo. There were are few other optimizations in _checkcopies() that I could not measure any impact from. One was from the "seen" set. Another was from a "continue" when the file was not in the destination manifest (corresponding to "am" in _tracefile). Also note that merge copies are not calculated when updating with a clean working copy, which is probably the most common case. I therefore think the much simpler code is worth the slowdown. Differential Revision: https://phab.mercurial-scm.org/D6255

File last commit:

r39851:c31ce080 default
r42408:57203e02 default
Show More
factotum.py
151 lines | 4.8 KiB | text/x-python | PythonLexer
# factotum.py - Plan 9 factotum integration for Mercurial
#
# Copyright (C) 2012 Steven Stallion <sstallion@gmail.com>
#
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the
# Free Software Foundation; either version 2 of the License, or (at your
# option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
# You should have received a copy of the GNU General Public License along
# with this program; if not, write to the Free Software Foundation, Inc.,
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
'''http authentication with factotum
This extension allows the factotum(4) facility on Plan 9 from Bell Labs
platforms to provide authentication information for HTTP access. Configuration
entries specified in the auth section as well as authentication information
provided in the repository URL are fully supported. If no prefix is specified,
a value of "*" will be assumed.
By default, keys are specified as::
proto=pass service=hg prefix=<prefix> user=<username> !password=<password>
If the factotum extension is unable to read the required key, one will be
requested interactively.
A configuration section is available to customize runtime behavior. By
default, these entries are::
[factotum]
executable = /bin/auth/factotum
mountpoint = /mnt/factotum
service = hg
The executable entry defines the full path to the factotum binary. The
mountpoint entry defines the path to the factotum file service. Lastly, the
service entry controls the service name used when reading keys.
'''
from __future__ import absolute_import
import os
from mercurial.i18n import _
from mercurial.utils import (
procutil,
)
from mercurial import (
error,
httpconnection,
registrar,
url,
util,
)
urlreq = util.urlreq
passwordmgr = url.passwordmgr
ERRMAX = 128
_executable = _mountpoint = _service = None
configtable = {}
configitem = registrar.configitem(configtable)
configitem('factotum', 'executable',
default='/bin/auth/factotum',
)
configitem('factotum', 'mountpoint',
default='/mnt/factotum',
)
configitem('factotum', 'service',
default='hg',
)
def auth_getkey(self, params):
if not self.ui.interactive():
raise error.Abort(_('factotum not interactive'))
if 'user=' not in params:
params = '%s user?' % params
params = '%s !password?' % params
os.system(procutil.tonativestr("%s -g '%s'" % (_executable, params)))
def auth_getuserpasswd(self, getkey, params):
params = 'proto=pass %s' % params
while True:
fd = os.open('%s/rpc' % _mountpoint, os.O_RDWR)
try:
os.write(fd, 'start %s' % params)
l = os.read(fd, ERRMAX).split()
if l[0] == 'ok':
os.write(fd, 'read')
status, user, passwd = os.read(fd, ERRMAX).split(None, 2)
if status == 'ok':
if passwd.startswith("'"):
if passwd.endswith("'"):
passwd = passwd[1:-1].replace("''", "'")
else:
raise error.Abort(_('malformed password string'))
return (user, passwd)
except (OSError, IOError):
raise error.Abort(_('factotum not responding'))
finally:
os.close(fd)
getkey(self, params)
def monkeypatch_method(cls):
def decorator(func):
setattr(cls, func.__name__, func)
return func
return decorator
@monkeypatch_method(passwordmgr)
def find_user_password(self, realm, authuri):
user, passwd = self.passwddb.find_user_password(realm, authuri)
if user and passwd:
self._writedebug(user, passwd)
return (user, passwd)
prefix = ''
res = httpconnection.readauthforuri(self.ui, authuri, user)
if res:
_, auth = res
prefix = auth.get('prefix')
user, passwd = auth.get('username'), auth.get('password')
if not user or not passwd:
if not prefix:
prefix = realm.split(' ')[0].lower()
params = 'service=%s prefix=%s' % (_service, prefix)
if user:
params = '%s user=%s' % (params, user)
user, passwd = auth_getuserpasswd(self, auth_getkey, params)
self.add_password(realm, authuri, user, passwd)
self._writedebug(user, passwd)
return (user, passwd)
def uisetup(ui):
global _executable
_executable = ui.config('factotum', 'executable')
global _mountpoint
_mountpoint = ui.config('factotum', 'mountpoint')
global _service
_service = ui.config('factotum', 'service')