##// END OF EJS Templates
rebase: use one dirstateguard for when using rebase.singletransaction...
rebase: use one dirstateguard for when using rebase.singletransaction This was previously landed as 2519994d25ca but backed out in b63351f6a2 because it broke hooks mid-rebase and caused conflict resolution data loss in the event of unexpected exceptions. This new version adds the behavior back but behind a config flag, since the performance improvement is notable in large repositories. The old commit message was: Recently we switched rebases to run the entire rebase inside a single transaction, which dramatically improved the speed of rebases in repos with large working copies. Let's also move the dirstate into a single dirstateguard to get the same benefits. This let's us avoid serializing the dirstate after each commit. In a large repo, rebasing 27 commits is sped up by about 20%. I believe the test changes are because us touching the dirstate gave the transaction something to actually rollback. (grafted from 9e3dc3a1638b9754b58a0cb26aaa75d868058109) (grafted from 7d38b41d2266d9a02a15c64229fae0da5738dcec) Differential Revision: https://phab.mercurial-scm.org/D135

File last commit:

r33621:609606d2 default
r33621:609606d2 default
Show More
rebase.py
1550 lines | 60.7 KiB | text/x-python | PythonLexer
# rebase.py - rebasing feature for mercurial
#
# Copyright 2008 Stefano Tortarolo <stefano.tortarolo at gmail dot com>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
'''command to move sets of revisions to a different ancestor
This extension lets you rebase changesets in an existing Mercurial
repository.
For more information:
https://mercurial-scm.org/wiki/RebaseExtension
'''
from __future__ import absolute_import
import errno
import os
from mercurial.i18n import _
from mercurial.node import (
hex,
nullid,
nullrev,
short,
)
from mercurial import (
bookmarks,
cmdutil,
commands,
copies,
destutil,
dirstateguard,
error,
extensions,
hg,
lock,
merge as mergemod,
mergeutil,
obsolete,
obsutil,
patch,
phases,
registrar,
repair,
repoview,
revset,
scmutil,
smartset,
util,
)
release = lock.release
templateopts = cmdutil.templateopts
# The following constants are used throughout the rebase module. The ordering of
# their values must be maintained.
# Indicates that a revision needs to be rebased
revtodo = -1
nullmerge = -2
revignored = -3
# successor in rebase destination
revprecursor = -4
# plain prune (no successor)
revpruned = -5
revskipped = (revignored, revprecursor, revpruned)
cmdtable = {}
command = registrar.command(cmdtable)
# Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = 'ships-with-hg-core'
def _nothingtorebase():
return 1
def _savegraft(ctx, extra):
s = ctx.extra().get('source', None)
if s is not None:
extra['source'] = s
s = ctx.extra().get('intermediate-source', None)
if s is not None:
extra['intermediate-source'] = s
def _savebranch(ctx, extra):
extra['branch'] = ctx.branch()
def _makeextrafn(copiers):
"""make an extrafn out of the given copy-functions.
A copy function takes a context and an extra dict, and mutates the
extra dict as needed based on the given context.
"""
def extrafn(ctx, extra):
for c in copiers:
c(ctx, extra)
return extrafn
def _destrebase(repo, sourceset, destspace=None):
"""small wrapper around destmerge to pass the right extra args
Please wrap destutil.destmerge instead."""
return destutil.destmerge(repo, action='rebase', sourceset=sourceset,
onheadcheck=False, destspace=destspace)
revsetpredicate = registrar.revsetpredicate()
@revsetpredicate('_destrebase')
def _revsetdestrebase(repo, subset, x):
# ``_rebasedefaultdest()``
# default destination for rebase.
# # XXX: Currently private because I expect the signature to change.
# # XXX: - bailing out in case of ambiguity vs returning all data.
# i18n: "_rebasedefaultdest" is a keyword
sourceset = None
if x is not None:
sourceset = revset.getset(repo, smartset.fullreposet(repo), x)
return subset & smartset.baseset([_destrebase(repo, sourceset)])
class rebaseruntime(object):
"""This class is a container for rebase runtime state"""
def __init__(self, repo, ui, opts=None):
if opts is None:
opts = {}
self.repo = repo
self.ui = ui
self.opts = opts
self.originalwd = None
self.external = nullrev
# Mapping between the old revision id and either what is the new rebased
# revision or what needs to be done with the old revision. The state
# dict will be what contains most of the rebase progress state.
self.state = {}
self.activebookmark = None
self.dest = None
self.skipped = set()
self.destancestors = set()
self.collapsef = opts.get('collapse', False)
self.collapsemsg = cmdutil.logmessage(ui, opts)
self.date = opts.get('date', None)
e = opts.get('extrafn') # internal, used by e.g. hgsubversion
self.extrafns = [_savegraft]
if e:
self.extrafns = [e]
self.keepf = opts.get('keep', False)
self.keepbranchesf = opts.get('keepbranches', False)
# keepopen is not meant for use on the command line, but by
# other extensions
self.keepopen = opts.get('keepopen', False)
self.obsoletenotrebased = {}
def storestatus(self, tr=None):
"""Store the current status to allow recovery"""
if tr:
tr.addfilegenerator('rebasestate', ('rebasestate',),
self._writestatus, location='plain')
else:
with self.repo.vfs("rebasestate", "w") as f:
self._writestatus(f)
def _writestatus(self, f):
repo = self.repo.unfiltered()
f.write(repo[self.originalwd].hex() + '\n')
f.write(repo[self.dest].hex() + '\n')
f.write(repo[self.external].hex() + '\n')
f.write('%d\n' % int(self.collapsef))
f.write('%d\n' % int(self.keepf))
f.write('%d\n' % int(self.keepbranchesf))
f.write('%s\n' % (self.activebookmark or ''))
for d, v in self.state.iteritems():
oldrev = repo[d].hex()
if v >= 0:
newrev = repo[v].hex()
elif v == revtodo:
# To maintain format compatibility, we have to use nullid.
# Please do remove this special case when upgrading the format.
newrev = hex(nullid)
else:
newrev = v
f.write("%s:%s\n" % (oldrev, newrev))
repo.ui.debug('rebase status stored\n')
def restorestatus(self):
"""Restore a previously stored status"""
repo = self.repo
keepbranches = None
dest = None
collapse = False
external = nullrev
activebookmark = None
state = {}
try:
f = repo.vfs("rebasestate")
for i, l in enumerate(f.read().splitlines()):
if i == 0:
originalwd = repo[l].rev()
elif i == 1:
dest = repo[l].rev()
elif i == 2:
external = repo[l].rev()
elif i == 3:
collapse = bool(int(l))
elif i == 4:
keep = bool(int(l))
elif i == 5:
keepbranches = bool(int(l))
elif i == 6 and not (len(l) == 81 and ':' in l):
# line 6 is a recent addition, so for backwards
# compatibility check that the line doesn't look like the
# oldrev:newrev lines
activebookmark = l
else:
oldrev, newrev = l.split(':')
if newrev in (str(nullmerge), str(revignored),
str(revprecursor), str(revpruned)):
state[repo[oldrev].rev()] = int(newrev)
elif newrev == nullid:
state[repo[oldrev].rev()] = revtodo
# Legacy compat special case
else:
state[repo[oldrev].rev()] = repo[newrev].rev()
except IOError as err:
if err.errno != errno.ENOENT:
raise
cmdutil.wrongtooltocontinue(repo, _('rebase'))
if keepbranches is None:
raise error.Abort(_('.hg/rebasestate is incomplete'))
skipped = set()
# recompute the set of skipped revs
if not collapse:
seen = {dest}
for old, new in sorted(state.items()):
if new != revtodo and new in seen:
skipped.add(old)
seen.add(new)
repo.ui.debug('computed skipped revs: %s\n' %
(' '.join(str(r) for r in sorted(skipped)) or None))
repo.ui.debug('rebase status resumed\n')
_setrebasesetvisibility(repo, set(state.keys()) | {originalwd})
self.originalwd = originalwd
self.dest = dest
self.state = state
self.skipped = skipped
self.collapsef = collapse
self.keepf = keep
self.keepbranchesf = keepbranches
self.external = external
self.activebookmark = activebookmark
def _handleskippingobsolete(self, rebaserevs, obsoleterevs, dest):
"""Compute structures necessary for skipping obsolete revisions
rebaserevs: iterable of all revisions that are to be rebased
obsoleterevs: iterable of all obsolete revisions in rebaseset
dest: a destination revision for the rebase operation
"""
self.obsoletenotrebased = {}
if not self.ui.configbool('experimental', 'rebaseskipobsolete',
default=True):
return
rebaseset = set(rebaserevs)
obsoleteset = set(obsoleterevs)
self.obsoletenotrebased = _computeobsoletenotrebased(self.repo,
obsoleteset, dest)
skippedset = set(self.obsoletenotrebased)
_checkobsrebase(self.repo, self.ui, obsoleteset, rebaseset, skippedset)
def _prepareabortorcontinue(self, isabort):
try:
self.restorestatus()
self.collapsemsg = restorecollapsemsg(self.repo, isabort)
except error.RepoLookupError:
if isabort:
clearstatus(self.repo)
clearcollapsemsg(self.repo)
self.repo.ui.warn(_('rebase aborted (no revision is removed,'
' only broken state is cleared)\n'))
return 0
else:
msg = _('cannot continue inconsistent rebase')
hint = _('use "hg rebase --abort" to clear broken state')
raise error.Abort(msg, hint=hint)
if isabort:
return abort(self.repo, self.originalwd, self.dest,
self.state, activebookmark=self.activebookmark)
obsrevs = (r for r, st in self.state.items() if st == revprecursor)
self._handleskippingobsolete(self.state.keys(), obsrevs, self.dest)
def _preparenewrebase(self, dest, rebaseset):
if dest is None:
return _nothingtorebase()
allowunstable = obsolete.isenabled(self.repo, obsolete.allowunstableopt)
if (not (self.keepf or allowunstable)
and self.repo.revs('first(children(%ld) - %ld)',
rebaseset, rebaseset)):
raise error.Abort(
_("can't remove original changesets with"
" unrebased descendants"),
hint=_('use --keep to keep original changesets'))
obsrevs = _filterobsoleterevs(self.repo, set(rebaseset))
self._handleskippingobsolete(rebaseset, obsrevs, dest.rev())
result = buildstate(self.repo, dest, rebaseset, self.collapsef,
self.obsoletenotrebased)
if not result:
# Empty state built, nothing to rebase
self.ui.status(_('nothing to rebase\n'))
return _nothingtorebase()
for root in self.repo.set('roots(%ld)', rebaseset):
if not self.keepf and not root.mutable():
raise error.Abort(_("can't rebase public changeset %s")
% root,
hint=_("see 'hg help phases' for details"))
(self.originalwd, self.dest, self.state) = result
if self.collapsef:
self.destancestors = self.repo.changelog.ancestors(
[self.dest],
inclusive=True)
self.external = externalparent(self.repo, self.state,
self.destancestors)
if dest.closesbranch() and not self.keepbranchesf:
self.ui.status(_('reopening closed branch head %s\n') % dest)
def _performrebase(self, tr):
repo, ui, opts = self.repo, self.ui, self.opts
if self.keepbranchesf:
# insert _savebranch at the start of extrafns so if
# there's a user-provided extrafn it can clobber branch if
# desired
self.extrafns.insert(0, _savebranch)
if self.collapsef:
branches = set()
for rev in self.state:
branches.add(repo[rev].branch())
if len(branches) > 1:
raise error.Abort(_('cannot collapse multiple named '
'branches'))
# Rebase
if not self.destancestors:
self.destancestors = repo.changelog.ancestors([self.dest],
inclusive=True)
# Keep track of the active bookmarks in order to reset them later
self.activebookmark = self.activebookmark or repo._activebookmark
if self.activebookmark:
bookmarks.deactivate(repo)
# Store the state before we begin so users can run 'hg rebase --abort'
# if we fail before the transaction closes.
self.storestatus()
sortedrevs = repo.revs('sort(%ld, -topo)', self.state)
cands = [k for k, v in self.state.iteritems() if v == revtodo]
total = len(cands)
pos = 0
for rev in sortedrevs:
ctx = repo[rev]
desc = '%d:%s "%s"' % (ctx.rev(), ctx,
ctx.description().split('\n', 1)[0])
names = repo.nodetags(ctx.node()) + repo.nodebookmarks(ctx.node())
if names:
desc += ' (%s)' % ' '.join(names)
if self.state[rev] == rev:
ui.status(_('already rebased %s\n') % desc)
elif self.state[rev] == revtodo:
pos += 1
ui.status(_('rebasing %s\n') % desc)
ui.progress(_("rebasing"), pos, ("%d:%s" % (rev, ctx)),
_('changesets'), total)
p1, p2, base = defineparents(repo, rev, self.dest,
self.state,
self.destancestors,
self.obsoletenotrebased)
self.storestatus(tr=tr)
storecollapsemsg(repo, self.collapsemsg)
if len(repo[None].parents()) == 2:
repo.ui.debug('resuming interrupted rebase\n')
else:
try:
ui.setconfig('ui', 'forcemerge', opts.get('tool', ''),
'rebase')
stats = rebasenode(repo, rev, p1, base, self.state,
self.collapsef, self.dest)
if stats and stats[3] > 0:
raise error.InterventionRequired(
_('unresolved conflicts (see hg '
'resolve, then hg rebase --continue)'))
finally:
ui.setconfig('ui', 'forcemerge', '', 'rebase')
if not self.collapsef:
merging = p2 != nullrev
editform = cmdutil.mergeeditform(merging, 'rebase')
editor = cmdutil.getcommiteditor(editform=editform, **opts)
newnode = concludenode(repo, rev, p1, p2,
extrafn=_makeextrafn(self.extrafns),
editor=editor,
keepbranches=self.keepbranchesf,
date=self.date)
if newnode is None:
# If it ended up being a no-op commit, then the normal
# merge state clean-up path doesn't happen, so do it
# here. Fix issue5494
mergemod.mergestate.clean(repo)
else:
# Skip commit if we are collapsing
repo.setparents(repo[p1].node())
newnode = None
# Update the state
if newnode is not None:
self.state[rev] = repo[newnode].rev()
ui.debug('rebased as %s\n' % short(newnode))
else:
if not self.collapsef:
ui.warn(_('note: rebase of %d:%s created no changes '
'to commit\n') % (rev, ctx))
self.skipped.add(rev)
self.state[rev] = p1
ui.debug('next revision set to %s\n' % p1)
elif self.state[rev] == nullmerge:
ui.debug('ignoring null merge rebase of %s\n' % rev)
elif self.state[rev] == revignored:
ui.status(_('not rebasing ignored %s\n') % desc)
elif self.state[rev] == revprecursor:
destctx = repo[self.obsoletenotrebased[rev]]
descdest = '%d:%s "%s"' % (destctx.rev(), destctx,
destctx.description().split('\n', 1)[0])
msg = _('note: not rebasing %s, already in destination as %s\n')
ui.status(msg % (desc, descdest))
elif self.state[rev] == revpruned:
msg = _('note: not rebasing %s, it has no successor\n')
ui.status(msg % desc)
else:
ui.status(_('already rebased %s as %s\n') %
(desc, repo[self.state[rev]]))
ui.progress(_('rebasing'), None)
ui.note(_('rebase merging completed\n'))
def _finishrebase(self):
repo, ui, opts = self.repo, self.ui, self.opts
if self.collapsef and not self.keepopen:
p1, p2, _base = defineparents(repo, min(self.state),
self.dest, self.state,
self.destancestors,
self.obsoletenotrebased)
editopt = opts.get('edit')
editform = 'rebase.collapse'
if self.collapsemsg:
commitmsg = self.collapsemsg
else:
commitmsg = 'Collapsed revision'
for rebased in self.state:
if rebased not in self.skipped and\
self.state[rebased] > nullmerge:
commitmsg += '\n* %s' % repo[rebased].description()
editopt = True
editor = cmdutil.getcommiteditor(edit=editopt, editform=editform)
revtoreuse = max(self.state)
dsguard = None
if ui.configbool('rebase', 'singletransaction'):
dsguard = dirstateguard.dirstateguard(repo, 'rebase')
with util.acceptintervention(dsguard):
newnode = concludenode(repo, revtoreuse, p1, self.external,
commitmsg=commitmsg,
extrafn=_makeextrafn(self.extrafns),
editor=editor,
keepbranches=self.keepbranchesf,
date=self.date)
if newnode is None:
newrev = self.dest
else:
newrev = repo[newnode].rev()
for oldrev in self.state.iterkeys():
if self.state[oldrev] > nullmerge:
self.state[oldrev] = newrev
if 'qtip' in repo.tags():
updatemq(repo, self.state, self.skipped, **opts)
# restore original working directory
# (we do this before stripping)
newwd = self.state.get(self.originalwd, self.originalwd)
if newwd == revprecursor:
newwd = self.obsoletenotrebased[self.originalwd]
elif newwd < 0:
# original directory is a parent of rebase set root or ignored
newwd = self.originalwd
if newwd not in [c.rev() for c in repo[None].parents()]:
ui.note(_("update back to initial working directory parent\n"))
hg.updaterepo(repo, newwd, False)
if not self.keepf:
collapsedas = None
if self.collapsef:
collapsedas = newnode
clearrebased(ui, repo, self.dest, self.state, self.skipped,
collapsedas)
clearstatus(repo)
clearcollapsemsg(repo)
ui.note(_("rebase completed\n"))
util.unlinkpath(repo.sjoin('undo'), ignoremissing=True)
if self.skipped:
skippedlen = len(self.skipped)
ui.note(_("%d revisions have been skipped\n") % skippedlen)
if (self.activebookmark and self.activebookmark in repo._bookmarks and
repo['.'].node() == repo._bookmarks[self.activebookmark]):
bookmarks.activate(repo, self.activebookmark)
@command('rebase',
[('s', 'source', '',
_('rebase the specified changeset and descendants'), _('REV')),
('b', 'base', '',
_('rebase everything from branching point of specified changeset'),
_('REV')),
('r', 'rev', [],
_('rebase these revisions'),
_('REV')),
('d', 'dest', '',
_('rebase onto the specified changeset'), _('REV')),
('', 'collapse', False, _('collapse the rebased changesets')),
('m', 'message', '',
_('use text as collapse commit message'), _('TEXT')),
('e', 'edit', False, _('invoke editor on commit messages')),
('l', 'logfile', '',
_('read collapse commit message from file'), _('FILE')),
('k', 'keep', False, _('keep original changesets')),
('', 'keepbranches', False, _('keep original branch names')),
('D', 'detach', False, _('(DEPRECATED)')),
('i', 'interactive', False, _('(DEPRECATED)')),
('t', 'tool', '', _('specify merge tool')),
('c', 'continue', False, _('continue an interrupted rebase')),
('a', 'abort', False, _('abort an interrupted rebase'))] +
templateopts,
_('[-s REV | -b REV] [-d REV] [OPTION]'))
def rebase(ui, repo, **opts):
"""move changeset (and descendants) to a different branch
Rebase uses repeated merging to graft changesets from one part of
history (the source) onto another (the destination). This can be
useful for linearizing *local* changes relative to a master
development tree.
Published commits cannot be rebased (see :hg:`help phases`).
To copy commits, see :hg:`help graft`.
If you don't specify a destination changeset (``-d/--dest``), rebase
will use the same logic as :hg:`merge` to pick a destination. if
the current branch contains exactly one other head, the other head
is merged with by default. Otherwise, an explicit revision with
which to merge with must be provided. (destination changeset is not
modified by rebasing, but new changesets are added as its
descendants.)
Here are the ways to select changesets:
1. Explicitly select them using ``--rev``.
2. Use ``--source`` to select a root changeset and include all of its
descendants.
3. Use ``--base`` to select a changeset; rebase will find ancestors
and their descendants which are not also ancestors of the destination.
4. If you do not specify any of ``--rev``, ``source``, or ``--base``,
rebase will use ``--base .`` as above.
Rebase will destroy original changesets unless you use ``--keep``.
It will also move your bookmarks (even if you do).
Some changesets may be dropped if they do not contribute changes
(e.g. merges from the destination branch).
Unlike ``merge``, rebase will do nothing if you are at the branch tip of
a named branch with two heads. You will need to explicitly specify source
and/or destination.
If you need to use a tool to automate merge/conflict decisions, you
can specify one with ``--tool``, see :hg:`help merge-tools`.
As a caveat: the tool will not be used to mediate when a file was
deleted, there is no hook presently available for this.
If a rebase is interrupted to manually resolve a conflict, it can be
continued with --continue/-c or aborted with --abort/-a.
.. container:: verbose
Examples:
- move "local changes" (current commit back to branching point)
to the current branch tip after a pull::
hg rebase
- move a single changeset to the stable branch::
hg rebase -r 5f493448 -d stable
- splice a commit and all its descendants onto another part of history::
hg rebase --source c0c3 --dest 4cf9
- rebase everything on a branch marked by a bookmark onto the
default branch::
hg rebase --base myfeature --dest default
- collapse a sequence of changes into a single commit::
hg rebase --collapse -r 1520:1525 -d .
- move a named branch while preserving its name::
hg rebase -r "branch(featureX)" -d 1.3 --keepbranches
Configuration Options:
You can make rebase require a destination if you set the following config
option::
[commands]
rebase.requiredest = True
By default, rebase will close the transaction after each commit. For
performance purposes, you can configure rebase to use a single transaction
across the entire rebase. WARNING: This setting introduces a significant
risk of losing the work you've done in a rebase if the rebase aborts
unexpectedly::
[rebase]
singletransaction = True
Return Values:
Returns 0 on success, 1 if nothing to rebase or there are
unresolved conflicts.
"""
rbsrt = rebaseruntime(repo, ui, opts)
with repo.wlock(), repo.lock():
# Validate input and define rebasing points
destf = opts.get('dest', None)
srcf = opts.get('source', None)
basef = opts.get('base', None)
revf = opts.get('rev', [])
# search default destination in this space
# used in the 'hg pull --rebase' case, see issue 5214.
destspace = opts.get('_destspace')
contf = opts.get('continue')
abortf = opts.get('abort')
if opts.get('interactive'):
try:
if extensions.find('histedit'):
enablehistedit = ''
except KeyError:
enablehistedit = " --config extensions.histedit="
help = "hg%s help -e histedit" % enablehistedit
msg = _("interactive history editing is supported by the "
"'histedit' extension (see \"%s\")") % help
raise error.Abort(msg)
if rbsrt.collapsemsg and not rbsrt.collapsef:
raise error.Abort(
_('message can only be specified with collapse'))
if contf or abortf:
if contf and abortf:
raise error.Abort(_('cannot use both abort and continue'))
if rbsrt.collapsef:
raise error.Abort(
_('cannot use collapse with continue or abort'))
if srcf or basef or destf:
raise error.Abort(
_('abort and continue do not allow specifying revisions'))
if abortf and opts.get('tool', False):
ui.warn(_('tool option will be ignored\n'))
if contf:
ms = mergemod.mergestate.read(repo)
mergeutil.checkunresolved(ms)
retcode = rbsrt._prepareabortorcontinue(abortf)
if retcode is not None:
return retcode
else:
dest, rebaseset = _definesets(ui, repo, destf, srcf, basef, revf,
destspace=destspace)
retcode = rbsrt._preparenewrebase(dest, rebaseset)
if retcode is not None:
return retcode
tr = None
dsguard = None
singletr = ui.configbool('rebase', 'singletransaction')
if singletr:
tr = repo.transaction('rebase')
with util.acceptintervention(tr):
if singletr:
dsguard = dirstateguard.dirstateguard(repo, 'rebase')
with util.acceptintervention(dsguard):
rbsrt._performrebase(tr)
rbsrt._finishrebase()
def _definesets(ui, repo, destf=None, srcf=None, basef=None, revf=None,
destspace=None):
"""use revisions argument to define destination and rebase set
"""
if revf is None:
revf = []
# destspace is here to work around issues with `hg pull --rebase` see
# issue5214 for details
if srcf and basef:
raise error.Abort(_('cannot specify both a source and a base'))
if revf and basef:
raise error.Abort(_('cannot specify both a revision and a base'))
if revf and srcf:
raise error.Abort(_('cannot specify both a revision and a source'))
cmdutil.checkunfinished(repo)
cmdutil.bailifchanged(repo)
if ui.configbool('commands', 'rebase.requiredest') and not destf:
raise error.Abort(_('you must specify a destination'),
hint=_('use: hg rebase -d REV'))
if destf:
dest = scmutil.revsingle(repo, destf)
if revf:
rebaseset = scmutil.revrange(repo, revf)
if not rebaseset:
ui.status(_('empty "rev" revision set - nothing to rebase\n'))
return None, None
elif srcf:
src = scmutil.revrange(repo, [srcf])
if not src:
ui.status(_('empty "source" revision set - nothing to rebase\n'))
return None, None
rebaseset = repo.revs('(%ld)::', src)
assert rebaseset
else:
base = scmutil.revrange(repo, [basef or '.'])
if not base:
ui.status(_('empty "base" revision set - '
"can't compute rebase set\n"))
return None, None
if not destf:
dest = repo[_destrebase(repo, base, destspace=destspace)]
destf = str(dest)
roots = [] # selected children of branching points
bpbase = {} # {branchingpoint: [origbase]}
for b in base: # group bases by branching points
bp = repo.revs('ancestor(%d, %d)', b, dest).first()
bpbase[bp] = bpbase.get(bp, []) + [b]
if None in bpbase:
# emulate the old behavior, showing "nothing to rebase" (a better
# behavior may be abort with "cannot find branching point" error)
bpbase.clear()
for bp, bs in bpbase.iteritems(): # calculate roots
roots += list(repo.revs('children(%d) & ancestors(%ld)', bp, bs))
rebaseset = repo.revs('%ld::', roots)
if not rebaseset:
# transform to list because smartsets are not comparable to
# lists. This should be improved to honor laziness of
# smartset.
if list(base) == [dest.rev()]:
if basef:
ui.status(_('nothing to rebase - %s is both "base"'
' and destination\n') % dest)
else:
ui.status(_('nothing to rebase - working directory '
'parent is also destination\n'))
elif not repo.revs('%ld - ::%d', base, dest):
if basef:
ui.status(_('nothing to rebase - "base" %s is '
'already an ancestor of destination '
'%s\n') %
('+'.join(str(repo[r]) for r in base),
dest))
else:
ui.status(_('nothing to rebase - working '
'directory parent is already an '
'ancestor of destination %s\n') % dest)
else: # can it happen?
ui.status(_('nothing to rebase from %s to %s\n') %
('+'.join(str(repo[r]) for r in base), dest))
return None, None
if not destf:
dest = repo[_destrebase(repo, rebaseset, destspace=destspace)]
destf = str(dest)
return dest, rebaseset
def externalparent(repo, state, destancestors):
"""Return the revision that should be used as the second parent
when the revisions in state is collapsed on top of destancestors.
Abort if there is more than one parent.
"""
parents = set()
source = min(state)
for rev in state:
if rev == source:
continue
for p in repo[rev].parents():
if (p.rev() not in state
and p.rev() not in destancestors):
parents.add(p.rev())
if not parents:
return nullrev
if len(parents) == 1:
return parents.pop()
raise error.Abort(_('unable to collapse on top of %s, there is more '
'than one external parent: %s') %
(max(destancestors),
', '.join(str(p) for p in sorted(parents))))
def concludenode(repo, rev, p1, p2, commitmsg=None, editor=None, extrafn=None,
keepbranches=False, date=None):
'''Commit the wd changes with parents p1 and p2. Reuse commit info from rev
but also store useful information in extra.
Return node of committed revision.'''
dsguard = util.nullcontextmanager()
if not repo.ui.configbool('rebase', 'singletransaction'):
dsguard = dirstateguard.dirstateguard(repo, 'rebase')
with dsguard:
repo.setparents(repo[p1].node(), repo[p2].node())
ctx = repo[rev]
if commitmsg is None:
commitmsg = ctx.description()
keepbranch = keepbranches and repo[p1].branch() != ctx.branch()
extra = {'rebase_source': ctx.hex()}
if extrafn:
extrafn(ctx, extra)
destphase = max(ctx.phase(), phases.draft)
overrides = {('phases', 'new-commit'): destphase}
with repo.ui.configoverride(overrides, 'rebase'):
if keepbranch:
repo.ui.setconfig('ui', 'allowemptycommit', True)
# Commit might fail if unresolved files exist
if date is None:
date = ctx.date()
newnode = repo.commit(text=commitmsg, user=ctx.user(),
date=date, extra=extra, editor=editor)
repo.dirstate.setbranch(repo[newnode].branch())
return newnode
def rebasenode(repo, rev, p1, base, state, collapse, dest):
'Rebase a single revision rev on top of p1 using base as merge ancestor'
# Merge phase
# Update to destination and merge it with local
if repo['.'].rev() != p1:
repo.ui.debug(" update to %d:%s\n" % (p1, repo[p1]))
mergemod.update(repo, p1, False, True)
else:
repo.ui.debug(" already in destination\n")
repo.dirstate.write(repo.currenttransaction())
repo.ui.debug(" merge against %d:%s\n" % (rev, repo[rev]))
if base is not None:
repo.ui.debug(" detach base %d:%s\n" % (base, repo[base]))
# When collapsing in-place, the parent is the common ancestor, we
# have to allow merging with it.
stats = mergemod.update(repo, rev, True, True, base, collapse,
labels=['dest', 'source'])
if collapse:
copies.duplicatecopies(repo, rev, dest)
else:
# If we're not using --collapse, we need to
# duplicate copies between the revision we're
# rebasing and its first parent, but *not*
# duplicate any copies that have already been
# performed in the destination.
p1rev = repo[rev].p1().rev()
copies.duplicatecopies(repo, rev, p1rev, skiprev=dest)
return stats
def adjustdest(repo, rev, dest, state):
"""adjust rebase destination given the current rebase state
rev is what is being rebased. Return a list of two revs, which are the
adjusted destinations for rev's p1 and p2, respectively. If a parent is
nullrev, return dest without adjustment for it.
For example, when doing rebase -r B+E -d F, rebase will first move B to B1,
and E's destination will be adjusted from F to B1.
B1 <- written during rebasing B
|
F <- original destination of B, E
|
| E <- rev, which is being rebased
| |
| D <- prev, one parent of rev being checked
| |
| x <- skipped, ex. no successor or successor in (::dest)
| |
| C
| |
| B <- rebased as B1
|/
A
Another example about merge changeset, rebase -r C+G+H -d K, rebase will
first move C to C1, G to G1, and when it's checking H, the adjusted
destinations will be [C1, G1].
H C1 G1
/| | /
F G |/
K | | -> K
| C D |
| |/ |
| B | ...
|/ |/
A A
"""
result = []
for prev in repo.changelog.parentrevs(rev):
adjusted = dest
if prev != nullrev:
# pick already rebased revs from state
source = [s for s, d in state.items() if d > 0]
candidate = repo.revs('max(%ld and (::%d))', source, prev).first()
if candidate is not None:
adjusted = state[candidate]
result.append(adjusted)
return result
def nearestrebased(repo, rev, state):
"""return the nearest ancestors of rev in the rebase result"""
rebased = [r for r in state if state[r] > nullmerge]
candidates = repo.revs('max(%ld and (::%d))', rebased, rev)
if candidates:
return state[candidates.first()]
else:
return None
def _checkobsrebase(repo, ui, rebaseobsrevs, rebasesetrevs, rebaseobsskipped):
"""
Abort if rebase will create divergence or rebase is noop because of markers
`rebaseobsrevs`: set of obsolete revision in source
`rebasesetrevs`: set of revisions to be rebased from source
`rebaseobsskipped`: set of revisions from source skipped because they have
successors in destination
"""
# Obsolete node with successors not in dest leads to divergence
divergenceok = ui.configbool('experimental',
'allowdivergence')
divergencebasecandidates = rebaseobsrevs - rebaseobsskipped
if divergencebasecandidates and not divergenceok:
divhashes = (str(repo[r])
for r in divergencebasecandidates)
msg = _("this rebase will cause "
"divergences from: %s")
h = _("to force the rebase please set "
"experimental.allowdivergence=True")
raise error.Abort(msg % (",".join(divhashes),), hint=h)
def defineparents(repo, rev, dest, state, destancestors,
obsoletenotrebased):
'Return the new parent relationship of the revision that will be rebased'
parents = repo[rev].parents()
p1 = p2 = nullrev
rp1 = None
p1n = parents[0].rev()
if p1n in destancestors:
p1 = dest
elif p1n in state:
if state[p1n] == nullmerge:
p1 = dest
elif state[p1n] in revskipped:
p1 = nearestrebased(repo, p1n, state)
if p1 is None:
p1 = dest
else:
p1 = state[p1n]
else: # p1n external
p1 = dest
p2 = p1n
if len(parents) == 2 and parents[1].rev() not in destancestors:
p2n = parents[1].rev()
# interesting second parent
if p2n in state:
if p1 == dest: # p1n in destancestors or external
p1 = state[p2n]
if p1 == revprecursor:
rp1 = obsoletenotrebased[p2n]
elif state[p2n] in revskipped:
p2 = nearestrebased(repo, p2n, state)
if p2 is None:
# no ancestors rebased yet, detach
p2 = dest
else:
p2 = state[p2n]
else: # p2n external
if p2 != nullrev: # p1n external too => rev is a merged revision
raise error.Abort(_('cannot use revision %d as base, result '
'would have 3 parents') % rev)
p2 = p2n
repo.ui.debug(" future parents are %d and %d\n" %
(repo[rp1 or p1].rev(), repo[p2].rev()))
if not any(p.rev() in state for p in parents):
# Case (1) root changeset of a non-detaching rebase set.
# Let the merge mechanism find the base itself.
base = None
elif not repo[rev].p2():
# Case (2) detaching the node with a single parent, use this parent
base = repo[rev].p1().rev()
else:
# Assuming there is a p1, this is the case where there also is a p2.
# We are thus rebasing a merge and need to pick the right merge base.
#
# Imagine we have:
# - M: current rebase revision in this step
# - A: one parent of M
# - B: other parent of M
# - D: destination of this merge step (p1 var)
#
# Consider the case where D is a descendant of A or B and the other is
# 'outside'. In this case, the right merge base is the D ancestor.
#
# An informal proof, assuming A is 'outside' and B is the D ancestor:
#
# If we pick B as the base, the merge involves:
# - changes from B to M (actual changeset payload)
# - changes from B to D (induced by rebase) as D is a rebased
# version of B)
# Which exactly represent the rebase operation.
#
# If we pick A as the base, the merge involves:
# - changes from A to M (actual changeset payload)
# - changes from A to D (with include changes between unrelated A and B
# plus changes induced by rebase)
# Which does not represent anything sensible and creates a lot of
# conflicts. A is thus not the right choice - B is.
#
# Note: The base found in this 'proof' is only correct in the specified
# case. This base does not make sense if is not D a descendant of A or B
# or if the other is not parent 'outside' (especially not if the other
# parent has been rebased). The current implementation does not
# make it feasible to consider different cases separately. In these
# other cases we currently just leave it to the user to correctly
# resolve an impossible merge using a wrong ancestor.
#
# xx, p1 could be -4, and both parents could probably be -4...
for p in repo[rev].parents():
if state.get(p.rev()) == p1:
base = p.rev()
break
else: # fallback when base not found
base = None
# Raise because this function is called wrong (see issue 4106)
raise AssertionError('no base found to rebase on '
'(defineparents called wrong)')
return rp1 or p1, p2, base
def isagitpatch(repo, patchname):
'Return true if the given patch is in git format'
mqpatch = os.path.join(repo.mq.path, patchname)
for line in patch.linereader(file(mqpatch, 'rb')):
if line.startswith('diff --git'):
return True
return False
def updatemq(repo, state, skipped, **opts):
'Update rebased mq patches - finalize and then import them'
mqrebase = {}
mq = repo.mq
original_series = mq.fullseries[:]
skippedpatches = set()
for p in mq.applied:
rev = repo[p.node].rev()
if rev in state:
repo.ui.debug('revision %d is an mq patch (%s), finalize it.\n' %
(rev, p.name))
mqrebase[rev] = (p.name, isagitpatch(repo, p.name))
else:
# Applied but not rebased, not sure this should happen
skippedpatches.add(p.name)
if mqrebase:
mq.finish(repo, mqrebase.keys())
# We must start import from the newest revision
for rev in sorted(mqrebase, reverse=True):
if rev not in skipped:
name, isgit = mqrebase[rev]
repo.ui.note(_('updating mq patch %s to %s:%s\n') %
(name, state[rev], repo[state[rev]]))
mq.qimport(repo, (), patchname=name, git=isgit,
rev=[str(state[rev])])
else:
# Rebased and skipped
skippedpatches.add(mqrebase[rev][0])
# Patches were either applied and rebased and imported in
# order, applied and removed or unapplied. Discard the removed
# ones while preserving the original series order and guards.
newseries = [s for s in original_series
if mq.guard_re.split(s, 1)[0] not in skippedpatches]
mq.fullseries[:] = newseries
mq.seriesdirty = True
mq.savedirty()
def storecollapsemsg(repo, collapsemsg):
'Store the collapse message to allow recovery'
collapsemsg = collapsemsg or ''
f = repo.vfs("last-message.txt", "w")
f.write("%s\n" % collapsemsg)
f.close()
def clearcollapsemsg(repo):
'Remove collapse message file'
repo.vfs.unlinkpath("last-message.txt", ignoremissing=True)
def restorecollapsemsg(repo, isabort):
'Restore previously stored collapse message'
try:
f = repo.vfs("last-message.txt")
collapsemsg = f.readline().strip()
f.close()
except IOError as err:
if err.errno != errno.ENOENT:
raise
if isabort:
# Oh well, just abort like normal
collapsemsg = ''
else:
raise error.Abort(_('missing .hg/last-message.txt for rebase'))
return collapsemsg
def clearstatus(repo):
'Remove the status files'
_clearrebasesetvisibiliy(repo)
# Make sure the active transaction won't write the state file
tr = repo.currenttransaction()
if tr:
tr.removefilegenerator('rebasestate')
repo.vfs.unlinkpath("rebasestate", ignoremissing=True)
def needupdate(repo, state):
'''check whether we should `update --clean` away from a merge, or if
somehow the working dir got forcibly updated, e.g. by older hg'''
parents = [p.rev() for p in repo[None].parents()]
# Are we in a merge state at all?
if len(parents) < 2:
return False
# We should be standing on the first as-of-yet unrebased commit.
firstunrebased = min([old for old, new in state.iteritems()
if new == nullrev])
if firstunrebased in parents:
return True
return False
def abort(repo, originalwd, dest, state, activebookmark=None):
'''Restore the repository to its original state. Additional args:
activebookmark: the name of the bookmark that should be active after the
restore'''
try:
# If the first commits in the rebased set get skipped during the rebase,
# their values within the state mapping will be the dest rev id. The
# dstates list must must not contain the dest rev (issue4896)
dstates = [s for s in state.values() if s >= 0 and s != dest]
immutable = [d for d in dstates if not repo[d].mutable()]
cleanup = True
if immutable:
repo.ui.warn(_("warning: can't clean up public changesets %s\n")
% ', '.join(str(repo[r]) for r in immutable),
hint=_("see 'hg help phases' for details"))
cleanup = False
descendants = set()
if dstates:
descendants = set(repo.changelog.descendants(dstates))
if descendants - set(dstates):
repo.ui.warn(_("warning: new changesets detected on destination "
"branch, can't strip\n"))
cleanup = False
if cleanup:
shouldupdate = False
rebased = filter(lambda x: x >= 0 and x != dest, state.values())
if rebased:
strippoints = [
c.node() for c in repo.set('roots(%ld)', rebased)]
updateifonnodes = set(rebased)
updateifonnodes.add(dest)
updateifonnodes.add(originalwd)
shouldupdate = repo['.'].rev() in updateifonnodes
# Update away from the rebase if necessary
if shouldupdate or needupdate(repo, state):
mergemod.update(repo, originalwd, False, True)
# Strip from the first rebased revision
if rebased:
# no backup of rebased cset versions needed
repair.strip(repo.ui, repo, strippoints)
if activebookmark and activebookmark in repo._bookmarks:
bookmarks.activate(repo, activebookmark)
finally:
clearstatus(repo)
clearcollapsemsg(repo)
repo.ui.warn(_('rebase aborted\n'))
return 0
def buildstate(repo, dest, rebaseset, collapse, obsoletenotrebased):
'''Define which revisions are going to be rebased and where
repo: repo
dest: context
rebaseset: set of rev
'''
originalwd = repo['.'].rev()
_setrebasesetvisibility(repo, set(rebaseset) | {originalwd})
# This check isn't strictly necessary, since mq detects commits over an
# applied patch. But it prevents messing up the working directory when
# a partially completed rebase is blocked by mq.
if 'qtip' in repo.tags() and (dest.node() in
[s.node for s in repo.mq.applied]):
raise error.Abort(_('cannot rebase onto an applied mq patch'))
roots = list(repo.set('roots(%ld)', rebaseset))
if not roots:
raise error.Abort(_('no matching revisions'))
roots.sort()
state = dict.fromkeys(rebaseset, revtodo)
detachset = set()
emptyrebase = True
for root in roots:
commonbase = root.ancestor(dest)
if commonbase == root:
raise error.Abort(_('source is ancestor of destination'))
if commonbase == dest:
wctx = repo[None]
if dest == wctx.p1():
# when rebasing to '.', it will use the current wd branch name
samebranch = root.branch() == wctx.branch()
else:
samebranch = root.branch() == dest.branch()
if not collapse and samebranch and dest in root.parents():
# mark the revision as done by setting its new revision
# equal to its old (current) revisions
state[root.rev()] = root.rev()
repo.ui.debug('source is a child of destination\n')
continue
emptyrebase = False
repo.ui.debug('rebase onto %s starting from %s\n' % (dest, root))
# Rebase tries to turn <dest> into a parent of <root> while
# preserving the number of parents of rebased changesets:
#
# - A changeset with a single parent will always be rebased as a
# changeset with a single parent.
#
# - A merge will be rebased as merge unless its parents are both
# ancestors of <dest> or are themselves in the rebased set and
# pruned while rebased.
#
# If one parent of <root> is an ancestor of <dest>, the rebased
# version of this parent will be <dest>. This is always true with
# --base option.
#
# Otherwise, we need to *replace* the original parents with
# <dest>. This "detaches" the rebased set from its former location
# and rebases it onto <dest>. Changes introduced by ancestors of
# <root> not common with <dest> (the detachset, marked as
# nullmerge) are "removed" from the rebased changesets.
#
# - If <root> has a single parent, set it to <dest>.
#
# - If <root> is a merge, we cannot decide which parent to
# replace, the rebase operation is not clearly defined.
#
# The table below sums up this behavior:
#
# +------------------+----------------------+-------------------------+
# | | one parent | merge |
# +------------------+----------------------+-------------------------+
# | parent in | new parent is <dest> | parents in ::<dest> are |
# | ::<dest> | | remapped to <dest> |
# +------------------+----------------------+-------------------------+
# | unrelated source | new parent is <dest> | ambiguous, abort |
# +------------------+----------------------+-------------------------+
#
# The actual abort is handled by `defineparents`
if len(root.parents()) <= 1:
# ancestors of <root> not ancestors of <dest>
detachset.update(repo.changelog.findmissingrevs([commonbase.rev()],
[root.rev()]))
if emptyrebase:
return None
for rev in sorted(state):
parents = [p for p in repo.changelog.parentrevs(rev) if p != nullrev]
# if all parents of this revision are done, then so is this revision
if parents and all((state.get(p) == p for p in parents)):
state[rev] = rev
for r in detachset:
if r not in state:
state[r] = nullmerge
if len(roots) > 1:
# If we have multiple roots, we may have "hole" in the rebase set.
# Rebase roots that descend from those "hole" should not be detached as
# other root are. We use the special `revignored` to inform rebase that
# the revision should be ignored but that `defineparents` should search
# a rebase destination that make sense regarding rebased topology.
rebasedomain = set(repo.revs('%ld::%ld', rebaseset, rebaseset))
for ignored in set(rebasedomain) - set(rebaseset):
state[ignored] = revignored
for r in obsoletenotrebased:
if obsoletenotrebased[r] is None:
state[r] = revpruned
else:
state[r] = revprecursor
return originalwd, dest.rev(), state
def clearrebased(ui, repo, dest, state, skipped, collapsedas=None):
"""dispose of rebased revision at the end of the rebase
If `collapsedas` is not None, the rebase was a collapse whose result if the
`collapsedas` node."""
tonode = repo.changelog.node
# Move bookmark of skipped nodes to destination. This cannot be handled
# by scmutil.cleanupnodes since it will treat rev as removed (no successor)
# and move bookmark backwards.
bmchanges = [(name, tonode(max(adjustdest(repo, rev, dest, state))))
for rev in skipped
for name in repo.nodebookmarks(tonode(rev))]
if bmchanges:
with repo.transaction('rebase') as tr:
repo._bookmarks.applychanges(repo, tr, bmchanges)
mapping = {}
for rev, newrev in sorted(state.items()):
if newrev >= 0 and newrev != rev:
if rev in skipped:
succs = ()
elif collapsedas is not None:
succs = (collapsedas,)
else:
succs = (tonode(newrev),)
mapping[tonode(rev)] = succs
scmutil.cleanupnodes(repo, mapping, 'rebase')
def pullrebase(orig, ui, repo, *args, **opts):
'Call rebase after pull if the latter has been invoked with --rebase'
ret = None
if opts.get('rebase'):
if ui.configbool('commands', 'rebase.requiredest'):
msg = _('rebase destination required by configuration')
hint = _('use hg pull followed by hg rebase -d DEST')
raise error.Abort(msg, hint=hint)
with repo.wlock(), repo.lock():
if opts.get('update'):
del opts['update']
ui.debug('--update and --rebase are not compatible, ignoring '
'the update flag\n')
cmdutil.checkunfinished(repo)
cmdutil.bailifchanged(repo, hint=_('cannot pull with rebase: '
'please commit or shelve your changes first'))
revsprepull = len(repo)
origpostincoming = commands.postincoming
def _dummy(*args, **kwargs):
pass
commands.postincoming = _dummy
try:
ret = orig(ui, repo, *args, **opts)
finally:
commands.postincoming = origpostincoming
revspostpull = len(repo)
if revspostpull > revsprepull:
# --rev option from pull conflict with rebase own --rev
# dropping it
if 'rev' in opts:
del opts['rev']
# positional argument from pull conflicts with rebase's own
# --source.
if 'source' in opts:
del opts['source']
# revsprepull is the len of the repo, not revnum of tip.
destspace = list(repo.changelog.revs(start=revsprepull))
opts['_destspace'] = destspace
try:
rebase(ui, repo, **opts)
except error.NoMergeDestAbort:
# we can maybe update instead
rev, _a, _b = destutil.destupdate(repo)
if rev == repo['.'].rev():
ui.status(_('nothing to rebase\n'))
else:
ui.status(_('nothing to rebase - updating instead\n'))
# not passing argument to get the bare update behavior
# with warning and trumpets
commands.update(ui, repo)
else:
if opts.get('tool'):
raise error.Abort(_('--tool can only be used with --rebase'))
ret = orig(ui, repo, *args, **opts)
return ret
def _setrebasesetvisibility(repo, revs):
"""store the currently rebased set on the repo object
This is used by another function to prevent rebased revision to because
hidden (see issue4504)"""
repo = repo.unfiltered()
repo._rebaseset = revs
# invalidate cache if visibility changes
hiddens = repo.filteredrevcache.get('visible', set())
if revs & hiddens:
repo.invalidatevolatilesets()
def _clearrebasesetvisibiliy(repo):
"""remove rebaseset data from the repo"""
repo = repo.unfiltered()
if '_rebaseset' in vars(repo):
del repo._rebaseset
def _rebasedvisible(orig, repo):
"""ensure rebased revs stay visible (see issue4504)"""
blockers = orig(repo)
blockers.update(getattr(repo, '_rebaseset', ()))
return blockers
def _filterobsoleterevs(repo, revs):
"""returns a set of the obsolete revisions in revs"""
return set(r for r in revs if repo[r].obsolete())
def _computeobsoletenotrebased(repo, rebaseobsrevs, dest):
"""return a mapping obsolete => successor for all obsolete nodes to be
rebased that have a successors in the destination
obsolete => None entries in the mapping indicate nodes with no successor"""
obsoletenotrebased = {}
# Build a mapping successor => obsolete nodes for the obsolete
# nodes to be rebased
allsuccessors = {}
cl = repo.changelog
for r in rebaseobsrevs:
node = cl.node(r)
for s in obsutil.allsuccessors(repo.obsstore, [node]):
try:
allsuccessors[cl.rev(s)] = cl.rev(node)
except LookupError:
pass
if allsuccessors:
# Look for successors of obsolete nodes to be rebased among
# the ancestors of dest
ancs = cl.ancestors([dest],
stoprev=min(allsuccessors),
inclusive=True)
for s in allsuccessors:
if s in ancs:
obsoletenotrebased[allsuccessors[s]] = s
elif (s == allsuccessors[s] and
allsuccessors.values().count(s) == 1):
# plain prune
obsoletenotrebased[s] = None
return obsoletenotrebased
def summaryhook(ui, repo):
if not repo.vfs.exists('rebasestate'):
return
try:
rbsrt = rebaseruntime(repo, ui, {})
rbsrt.restorestatus()
state = rbsrt.state
except error.RepoLookupError:
# i18n: column positioning for "hg summary"
msg = _('rebase: (use "hg rebase --abort" to clear broken state)\n')
ui.write(msg)
return
numrebased = len([i for i in state.itervalues() if i >= 0])
# i18n: column positioning for "hg summary"
ui.write(_('rebase: %s, %s (rebase --continue)\n') %
(ui.label(_('%d rebased'), 'rebase.rebased') % numrebased,
ui.label(_('%d remaining'), 'rebase.remaining') %
(len(state) - numrebased)))
def uisetup(ui):
#Replace pull with a decorator to provide --rebase option
entry = extensions.wrapcommand(commands.table, 'pull', pullrebase)
entry[1].append(('', 'rebase', None,
_("rebase working directory to branch head")))
entry[1].append(('t', 'tool', '',
_("specify merge tool for rebase")))
cmdutil.summaryhooks.add('rebase', summaryhook)
cmdutil.unfinishedstates.append(
['rebasestate', False, False, _('rebase in progress'),
_("use 'hg rebase --continue' or 'hg rebase --abort'")])
cmdutil.afterresolvedstates.append(
['rebasestate', _('hg rebase --continue')])
# ensure rebased rev are not hidden
extensions.wrapfunction(repoview, 'pinnedrevs', _rebasedvisible)