##// END OF EJS Templates
upstream » mercurial-mirror
RSS

Clone from https://www.mercurial-scm.org/repo/hg-all

run-tests: report code coverage from source directory...
run-tests: report code coverage from source directory As part of testing code coverage output, I noticed some files were being reported twice: there was an entry for the file in the install location and for the file in the source tree. I'm not sure why this is. But it resulted in under-reporting of coverage data since some lines weren't getting covered in both locations. I also noticed that files in the source directory and outside the "mercurial" and "hgext" packages were getting included in the coverage report. Cosmetically, this seemed odd to me. It's not difficult to filter paths from the report. But I figure this data can be useful (we could start reporting run-tests.py coverage, for example). This patch switches the coverage API to report code coverage from the source directory. It registers a path alias so that data from the install location is merged into data from the source directory. We now get merged results for files that were being reported in multiple locations. Since code coverage reporting now relies on the profiled install now being in sync with the source tree, an additional check to disallow code coverage when --with-hg is specified has been added. This should have been present before, as --local was previously disallowed for the same reasons. Merging the paths raises our aggregate line coverage from ~60 to 81%.
Gregory Szorc - - Load All Authors

File last commit:

r24500:7b0a20cd default
r24506:60bbb407 default
Show More
test-run-tests.t
492 lines | 13.0 KiB | text/troff | Tads3Lexer
/ tests / test-run-tests.t
History | Annotation | Raw |Copy content |Copy permalink
This file tests the behavior of run-tests.py itself.
Smoke test
============
$ $TESTDIR/run-tests.py $HGTEST_RUN_TESTS_PURE
# Ran 0 tests, 0 skipped, 0 warned, 0 failed.
a succesful test
=======================
$ cat > test-success.t << EOF
> $ echo babar
> babar
> $ echo xyzzy
> xyzzy
> EOF
$ $TESTDIR/run-tests.py --with-hg=`which hg`
.
# Ran 1 tests, 0 skipped, 0 warned, 0 failed.
failing test
==================
$ cat > test-failure.t << EOF
> $ echo babar
> rataxes
> This is a noop statement so that
> this test is still more bytes than success.
> EOF
>>> fh = open('test-failure-unicode.t', 'wb')
>>> fh.write(u' $ echo babar\u03b1\n'.encode('utf-8'))
>>> fh.write(u' l\u03b5\u03b5t\n'.encode('utf-8'))
$ $TESTDIR/run-tests.py --with-hg=`which hg`
--- $TESTTMP/test-failure.t
+++ $TESTTMP/test-failure.t.err
@@ -1,4 +1,4 @@
$ echo babar
- rataxes
+ babar
This is a noop statement so that
this test is still more bytes than success.
ERROR: test-failure.t output changed
!.
--- $TESTTMP/test-failure-unicode.t
+++ $TESTTMP/test-failure-unicode.t.err
@@ -1,2 +1,2 @@
$ echo babar\xce\xb1 (esc)
- l\xce\xb5\xce\xb5t (esc)
+ babar\xce\xb1 (esc)
ERROR: test-failure-unicode.t output changed
!
Failed test-failure.t: output changed
Failed test-failure-unicode.t: output changed
# Ran 3 tests, 0 skipped, 0 warned, 2 failed.
python hash seed: * (glob)
[1]
test --xunit support
$ $TESTDIR/run-tests.py --with-hg=`which hg` --xunit=xunit.xml
--- $TESTTMP/test-failure.t
+++ $TESTTMP/test-failure.t.err
@@ -1,4 +1,4 @@
$ echo babar
- rataxes
+ babar
This is a noop statement so that
this test is still more bytes than success.
ERROR: test-failure.t output changed
!.
--- $TESTTMP/test-failure-unicode.t
+++ $TESTTMP/test-failure-unicode.t.err
@@ -1,2 +1,2 @@
$ echo babar\xce\xb1 (esc)
- l\xce\xb5\xce\xb5t (esc)
+ babar\xce\xb1 (esc)
ERROR: test-failure-unicode.t output changed
!
Failed test-failure.t: output changed
Failed test-failure-unicode.t: output changed
# Ran 3 tests, 0 skipped, 0 warned, 2 failed.
python hash seed: * (glob)
[1]
$ cat xunit.xml
<?xml version="1.0" encoding="utf-8"?>
<testsuite errors="0" failures="2" name="run-tests" skipped="0" tests="3">
<testcase name="test-success.t" time="*"/> (glob)
<testcase name="test-failure-unicode.t" time="*"> (glob)
<![CDATA[--- $TESTTMP/test-failure-unicode.t
+++ $TESTTMP/test-failure-unicode.t.err
@@ -1,2 +1,2 @@
$ echo babar\xce\xb1 (esc)
- l\xce\xb5\xce\xb5t (esc)
+ babar\xce\xb1 (esc)
]]> </testcase>
<testcase name="test-failure.t" time="*"> (glob)
<![CDATA[--- $TESTTMP/test-failure.t
+++ $TESTTMP/test-failure.t.err
@@ -1,4 +1,4 @@
$ echo babar
- rataxes
+ babar
This is a noop statement so that
this test is still more bytes than success.
]]> </testcase>
</testsuite>
$ rm test-failure-unicode.t
test for --retest
====================
$ $TESTDIR/run-tests.py --with-hg=`which hg` --retest
--- $TESTTMP/test-failure.t
+++ $TESTTMP/test-failure.t.err
@@ -1,4 +1,4 @@
$ echo babar
- rataxes
+ babar
This is a noop statement so that
this test is still more bytes than success.
ERROR: test-failure.t output changed
!
Failed test-failure.t: output changed
# Ran 2 tests, 1 skipped, 0 warned, 1 failed.
python hash seed: * (glob)
[1]
Selecting Tests To Run
======================
successful
$ $TESTDIR/run-tests.py --with-hg=`which hg` test-success.t
.
# Ran 1 tests, 0 skipped, 0 warned, 0 failed.
success w/ keyword
$ $TESTDIR/run-tests.py --with-hg=`which hg` -k xyzzy
.
# Ran 2 tests, 1 skipped, 0 warned, 0 failed.
failed
$ $TESTDIR/run-tests.py --with-hg=`which hg` test-failure.t
--- $TESTTMP/test-failure.t
+++ $TESTTMP/test-failure.t.err
@@ -1,4 +1,4 @@
$ echo babar
- rataxes
+ babar
This is a noop statement so that
this test is still more bytes than success.
ERROR: test-failure.t output changed
!
Failed test-failure.t: output changed
# Ran 1 tests, 0 skipped, 0 warned, 1 failed.
python hash seed: * (glob)
[1]
failure w/ keyword
$ $TESTDIR/run-tests.py --with-hg=`which hg` -k rataxes
--- $TESTTMP/test-failure.t
+++ $TESTTMP/test-failure.t.err
@@ -1,4 +1,4 @@
$ echo babar
- rataxes
+ babar
This is a noop statement so that
this test is still more bytes than success.
ERROR: test-failure.t output changed
!
Failed test-failure.t: output changed
# Ran 2 tests, 1 skipped, 0 warned, 1 failed.
python hash seed: * (glob)
[1]
Verify that when a process fails to start we show a useful message
==================================================================
NOTE: there is currently a bug where this shows "2 failed" even though
it's actually the same test being reported for failure twice.
$ cat > test-serve-fail.t <<EOF
> $ echo 'abort: child process failed to start blah'
> EOF
$ $TESTDIR/run-tests.py --with-hg=`which hg` test-serve-fail.t
ERROR: test-serve-fail.t output changed
!
ERROR: test-serve-fail.t output changed
!
Failed test-serve-fail.t: server failed to start (HGPORT=*) (glob)
Failed test-serve-fail.t: output changed
# Ran 1 tests, 0 skipped, 0 warned, 2 failed.
python hash seed: * (glob)
[1]
$ rm test-serve-fail.t
Running In Debug Mode
======================
$ $TESTDIR/run-tests.py --with-hg=`which hg` --debug 2>&1 | grep -v pwd
+ echo *SALT* 0 0 (glob)
*SALT* 0 0 (glob)
+ echo babar
babar
+ echo *SALT* 4 0 (glob)
*SALT* 4 0 (glob)
.+ echo *SALT* 0 0 (glob)
*SALT* 0 0 (glob)
+ echo babar
babar
+ echo *SALT* 2 0 (glob)
*SALT* 2 0 (glob)
+ echo xyzzy
xyzzy
+ echo *SALT* 4 0 (glob)
*SALT* 4 0 (glob)
.
# Ran 2 tests, 0 skipped, 0 warned, 0 failed.
Parallel runs
==============
(duplicate the failing test to get predictable output)
$ cp test-failure.t test-failure-copy.t
$ $TESTDIR/run-tests.py --with-hg=`which hg` --jobs 2 test-failure*.t -n
!!
Failed test-failure*.t: output changed (glob)
Failed test-failure*.t: output changed (glob)
# Ran 2 tests, 0 skipped, 0 warned, 2 failed.
python hash seed: * (glob)
[1]
failures in parallel with --first should only print one failure
>>> f = open('test-nothing.t', 'w')
>>> f.write('foo\n' * 1024)
>>> f.write(' $ sleep 1')
$ $TESTDIR/run-tests.py --with-hg=`which hg` --jobs 2 --first
--- $TESTTMP/test-failure*.t (glob)
+++ $TESTTMP/test-failure*.t.err (glob)
@@ -1,4 +1,4 @@
$ echo babar
- rataxes
+ babar
This is a noop statement so that
this test is still more bytes than success.
Failed test-failure*.t: output changed (glob)
# Ran 2 tests, 0 skipped, 0 warned, 1 failed.
python hash seed: * (glob)
[1]
(delete the duplicated test file)
$ rm test-failure-copy.t test-nothing.t
Interactive run
===============
(backup the failing test)
$ cp test-failure.t backup
Refuse the fix
$ echo 'n' | $TESTDIR/run-tests.py --with-hg=`which hg` -i
--- $TESTTMP/test-failure.t
+++ $TESTTMP/test-failure.t.err
@@ -1,4 +1,4 @@
$ echo babar
- rataxes
+ babar
This is a noop statement so that
this test is still more bytes than success.
Accept this change? [n]
ERROR: test-failure.t output changed
!.
Failed test-failure.t: output changed
# Ran 2 tests, 0 skipped, 0 warned, 1 failed.
python hash seed: * (glob)
[1]
$ cat test-failure.t
$ echo babar
rataxes
This is a noop statement so that
this test is still more bytes than success.
Interactive with custom view
$ echo 'n' | $TESTDIR/run-tests.py --with-hg=`which hg` -i --view echo
$TESTTMP/test-failure.t $TESTTMP/test-failure.t.err (glob)
Accept this change? [n]* (glob)
ERROR: test-failure.t output changed
!.
Failed test-failure.t: output changed
# Ran 2 tests, 0 skipped, 0 warned, 1 failed.
python hash seed: * (glob)
[1]
View the fix
$ echo 'y' | $TESTDIR/run-tests.py --with-hg=`which hg` --view echo
$TESTTMP/test-failure.t $TESTTMP/test-failure.t.err (glob)
ERROR: test-failure.t output changed
!.
Failed test-failure.t: output changed
# Ran 2 tests, 0 skipped, 0 warned, 1 failed.
python hash seed: * (glob)
[1]
Accept the fix
$ echo " $ echo 'saved backup bundle to \$TESTTMP/foo.hg'" >> test-failure.t
$ echo " saved backup bundle to \$TESTTMP/foo.hg" >> test-failure.t
$ echo " $ echo 'saved backup bundle to \$TESTTMP/foo.hg'" >> test-failure.t
$ echo " saved backup bundle to \$TESTTMP/foo.hg (glob)" >> test-failure.t
$ echo " $ echo 'saved backup bundle to \$TESTTMP/foo.hg'" >> test-failure.t
$ echo " saved backup bundle to \$TESTTMP/*.hg (glob)" >> test-failure.t
$ echo 'y' | $TESTDIR/run-tests.py --with-hg=`which hg` -i 2>&1 | \
> sed -e 's,(glob)$,&<,g'
--- $TESTTMP/test-failure.t
+++ $TESTTMP/test-failure.t.err
@@ -1,9 +1,9 @@
$ echo babar
- rataxes
+ babar
This is a noop statement so that
this test is still more bytes than success.
$ echo 'saved backup bundle to $TESTTMP/foo.hg'
- saved backup bundle to $TESTTMP/foo.hg
+ saved backup bundle to $TESTTMP/foo.hg (glob)<
$ echo 'saved backup bundle to $TESTTMP/foo.hg'
saved backup bundle to $TESTTMP/foo.hg (glob)<
$ echo 'saved backup bundle to $TESTTMP/foo.hg'
Accept this change? [n] ..
# Ran 2 tests, 0 skipped, 0 warned, 0 failed.
$ sed -e 's,(glob)$,&<,g' test-failure.t
$ echo babar
babar
This is a noop statement so that
this test is still more bytes than success.
$ echo 'saved backup bundle to $TESTTMP/foo.hg'
saved backup bundle to $TESTTMP/foo.hg (glob)<
$ echo 'saved backup bundle to $TESTTMP/foo.hg'
saved backup bundle to $TESTTMP/foo.hg (glob)<
$ echo 'saved backup bundle to $TESTTMP/foo.hg'
saved backup bundle to $TESTTMP/*.hg (glob)<
(reinstall)
$ mv backup test-failure.t
No Diff
===============
$ $TESTDIR/run-tests.py --with-hg=`which hg` --nodiff
!.
Failed test-failure.t: output changed
# Ran 2 tests, 0 skipped, 0 warned, 1 failed.
python hash seed: * (glob)
[1]
test for --time
==================
$ $TESTDIR/run-tests.py --with-hg=`which hg` test-success.t --time
.
# Ran 1 tests, 0 skipped, 0 warned, 0 failed.
# Producing time report
cuser csys real Test
\s*[\d\.]{5} \s*[\d\.]{5} \s*[\d\.]{5} test-success.t (re)
test for --time with --job enabled
====================================
$ $TESTDIR/run-tests.py --with-hg=`which hg` test-success.t --time --jobs 2
.
# Ran 1 tests, 0 skipped, 0 warned, 0 failed.
# Producing time report
cuser csys real Test
\s*[\d\.]{5} \s*[\d\.]{5} \s*[\d\.]{5} test-success.t (re)
Skips
================
$ cat > test-skip.t <<EOF
> $ echo xyzzy
> #require false
> EOF
$ $TESTDIR/run-tests.py --with-hg=`which hg` --nodiff
!.s
Skipped test-skip.t: skipped
Failed test-failure.t: output changed
# Ran 2 tests, 1 skipped, 0 warned, 1 failed.
python hash seed: * (glob)
[1]
$ $TESTDIR/run-tests.py --with-hg=`which hg` --keyword xyzzy
.s
Skipped test-skip.t: skipped
# Ran 2 tests, 2 skipped, 0 warned, 0 failed.
Skips with xml
$ $TESTDIR/run-tests.py --with-hg=`which hg` --keyword xyzzy \
> --xunit=xunit.xml
.s
Skipped test-skip.t: skipped
# Ran 2 tests, 2 skipped, 0 warned, 0 failed.
$ cat xunit.xml
<?xml version="1.0" encoding="utf-8"?>
<testsuite errors="0" failures="0" name="run-tests" skipped="2" tests="2">
<testcase name="test-success.t" time="*"/> (glob)
</testsuite>
Missing skips or blacklisted skips don't count as executed:
$ echo test-failure.t > blacklist
$ $TESTDIR/run-tests.py --with-hg=`which hg` --blacklist=blacklist \
> test-failure.t test-bogus.t
ss
Skipped test-bogus.t: Doesn't exist
Skipped test-failure.t: blacklisted
# Ran 0 tests, 2 skipped, 0 warned, 0 failed.
#if json
test for --json
==================
$ $TESTDIR/run-tests.py --with-hg=`which hg` --json
--- $TESTTMP/test-failure.t
+++ $TESTTMP/test-failure.t.err
@@ -1,4 +1,4 @@
$ echo babar
- rataxes
+ babar
This is a noop statement so that
this test is still more bytes than success.
ERROR: test-failure.t output changed
!.s
Skipped test-skip.t: skipped
Failed test-failure.t: output changed
# Ran 2 tests, 1 skipped, 0 warned, 1 failed.
python hash seed: * (glob)
[1]
$ cat report.json
testreport ={
"test-failure.t": [\{] (re)
"csys": "\s*[\d\.]{4,5}", ? (re)
"cuser": "\s*[\d\.]{4,5}", ? (re)
"result": "failure", ? (re)
"time": "\s*[\d\.]{4,5}" (re)
}, ? (re)
"test-skip.t": {
"csys": "\s*[\d\.]{4,5}", ? (re)
"cuser": "\s*[\d\.]{4,5}", ? (re)
"result": "skip", ? (re)
"time": "\s*[\d\.]{4,5}" (re)
}, ? (re)
"test-success.t": [\{] (re)
"csys": "\s*[\d\.]{4,5}", ? (re)
"cuser": "\s*[\d\.]{4,5}", ? (re)
"result": "success", ? (re)
"time": "\s*[\d\.]{4,5}" (re)
}
} (no-eol)
#endif