##// END OF EJS Templates
upstream » mercurial-mirror
RSS

Clone from https://www.mercurial-scm.org/repo/hg-all

rebase: turn rebase revs into set before filtering obsolete...
rebase: turn rebase revs into set before filtering obsolete When the inhibit extension from mutable-history is enabled, it attempts to iterate over the rebaseset to prevent the nodes being rebased from being marked obsolete. This happens at the same time as rebase's _filterobsoleterevs function trying to iterate over the rebaseset to figure out which ones are obsolete. The two of these iterating over the same revset generatorset cause a 'generator already executing' exception. This is probably a flaw in the revset implementation, since iterating over the same set twice should be supported. This regression was introduced in 5d16ebe7b14, since it changed _filterobsoleterevs to be called before the rebaseset was turned into a set(). For now let’s just make the rebaseset an actual set again before calling that function. This was caught by the inhibit tests. The relevant call stack from test-inhibit.t: File "/tmp/hgtests.jgjrN5/install/lib/python/hgext/rebase.py", line 285, in _preparenewrebase obsrevs = _filterobsoleterevs(self.repo, rebaseset) File "/data/hgbuild/facebook-hg-rpms/mutable-history/hgext/inhibit.py", line 197, in _filterobsoleterevswrap r = orig(repo, rebasesetrevs, *args, **kwargs) File "/tmp/hgtests.jgjrN5/install/lib/python/hgext/rebase.py", line 1380, in _filterobsoleterevs return set(r for r in revs if repo[r].obsolete()) File "/tmp/hgtests.jgjrN5/install/lib/python/hgext/rebase.py", line 1380, in <genexpr> return set(r for r in revs if repo[r].obsolete()) File "/tmp/hgtests.jgjrN5/install/lib/python/mercurial/revset.py", line 3079, in _iterordered val2 = next(iter2) File "/tmp/hgtests.jgjrN5/install/lib/python/mercurial/revset.py", line 3417, in gen yield nextrev() File "/tmp/hgtests.jgjrN5/install/lib/python/mercurial/revset.py", line 3424, in _consumegen for item in self._gen: File "/tmp/hgtests.jgjrN5/install/lib/python/mercurial/revset.py", line 71, in iterate cl = repo.changelog File "/tmp/hgtests.jgjrN5/install/lib/python/mercurial/repoview.py", line 319, in changelog revs = filterrevs(unfi, self.filtername) File "/tmp/hgtests.jgjrN5/install/lib/python/mercurial/repoview.py", line 261, in filterrevs repo.filteredrevcache[filtername] = func(repo.unfiltered()) File "/data/hgbuild/facebook-hg-rpms/mutable-history/hgext/directaccess.py", line 65, in _computehidden hidden = repoview.filterrevs(repo, 'visible') File "/tmp/hgtests.jgjrN5/install/lib/python/mercurial/repoview.py", line 261, in filterrevs repo.filteredrevcache[filtername] = func(repo.unfiltered()) File "/tmp/hgtests.jgjrN5/install/lib/python/mercurial/repoview.py", line 175, in computehidden hideable = hideablerevs(repo) File "/tmp/hgtests.jgjrN5/install/lib/python/mercurial/repoview.py", line 33, in hideablerevs return obsolete.getrevs(repo, 'obsolete') File "/tmp/hgtests.jgjrN5/install/lib/python/mercurial/obsolete.py", line 1097, in getrevs repo.obsstore.caches[name] = cachefuncs[name](repo) File "/data/hgbuild/facebook-hg-rpms/mutable-history/hgext/inhibit.py", line 255, in _computeobsoleteset if getrev(n) not in blacklist: File "/tmp/hgtests.jgjrN5/install/lib/python/mercurial/revset.py", line 3264, in __contains__ return x in self._r1 or x in self._r2 File "/tmp/hgtests.jgjrN5/install/lib/python/mercurial/revset.py", line 3348, in __contains__ for l in self._consumegen(): File "/tmp/hgtests.jgjrN5/install/lib/python/mercurial/revset.py", line 3424, in _consumegen for item in self._gen: ValueError: generator already executing
Mads Kiilerich - - Load All Authors

File last commit:

r26781:1aee2ab0 default
r29610:754f6367 stable
Show More
hgweb.txt
86 lines | 3.3 KiB | text/plain | TextLexer
/ mercurial / help / hgweb.txt
History | Annotation | Raw |Copy content |Copy permalink
Mercurial's internal web server, hgweb, can serve either a single
repository, or a tree of repositories. In the second case, repository
paths and global options can be defined using a dedicated
configuration file common to :hg:`serve`, ``hgweb.wsgi``,
``hgweb.cgi`` and ``hgweb.fcgi``.
This file uses the same syntax as other Mercurial configuration files
but recognizes only the following sections:
- web
- paths
- collections
The ``web`` options are thoroughly described in :hg:`help config`.
The ``paths`` section maps URL paths to paths of repositories in the
filesystem. hgweb will not expose the filesystem directly - only
Mercurial repositories can be published and only according to the
configuration.
The left hand side is the path in the URL. Note that hgweb reserves
subpaths like ``rev`` or ``file``, try using different names for
nested repositories to avoid confusing effects.
The right hand side is the path in the filesystem. If the specified
path ends with ``*`` or ``**`` the filesystem will be searched
recursively for repositories below that point.
With ``*`` it will not recurse into the repositories it finds (except for
``.hg/patches``).
With ``**`` it will also search inside repository working directories
and possibly find subrepositories.
In this example::
[paths]
/projects/a = /srv/tmprepos/a
/projects/b = c:/repos/b
/ = /srv/repos/*
/user/bob = /home/bob/repos/**
- The first two entries make two repositories in different directories
appear under the same directory in the web interface
- The third entry will publish every Mercurial repository found in
``/srv/repos/``, for instance the repository ``/srv/repos/quux/``
will appear as ``http://server/quux/``
- The fourth entry will publish both ``http://server/user/bob/quux/``
and ``http://server/user/bob/quux/testsubrepo/``
The ``collections`` section is deprecated and has been superseded by
``paths``.
URLs and Common Arguments
=========================
URLs under each repository have the form ``/{command}[/{arguments}]``
where ``{command}`` represents the name of a command or handler and
``{arguments}`` represents any number of additional URL parameters
to that command.
The web server has a default style associated with it. Styles map to
a collection of named templates. Each template is used to render a
specific piece of data, such as a changeset or diff.
The style for the current request can be overwritten two ways. First,
if ``{command}`` contains a hyphen (``-``), the text before the hyphen
defines the style. For example, ``/atom-log`` will render the ``log``
command handler with the ``atom`` style. The second way to set the
style is with the ``style`` query string argument. For example,
``/log?style=atom``. The hyphenated URL parameter is preferred.
Not all templates are available for all styles. Attempting to use
a style that doesn't have all templates defined may result in an error
rendering the page.
Many commands take a ``{revision}`` URL parameter. This defines the
changeset to operate on. This is commonly specified as the short,
12 digit hexadecimal abbreviation for the full 40 character unique
revision identifier. However, any value described by
:hg:`help revisions` typically works.
Commands and URLs
=================
The following web commands and their URLs are available:
.. webcommandsmarker