##// END OF EJS Templates
upstream » mercurial-mirror
RSS

Clone from https://www.mercurial-scm.org/repo/hg-all

revisions: allow "x123" to refer to nodeid prefix "123"...
revisions: allow "x123" to refer to nodeid prefix "123" When resolving "123" to a revision, we try to interpret it as revnum before we try to interpret it as a nodeid hex prefix. This can lead to the shortest valid prefix being longer than necessary. This patch lets us write such nodeids in a shorter form by prefixing them with "x" instead of adding more hex digits until they're longer than the longest decimal revnum. On my hg repo with almost 69k revisions, turning this feature on saves on average 0.4% on the average nodeid length. That clearly doesn't justify this patch. However, it becomes more usefule when combined with the earlier patches in this series that let you disambiguate nodeid prefixes within a configured revset. Note that we attempt to resolve symbols as nodeid prefixes after we've exhausted all other posibilities, so this is a backwards compatible change (only queries that would previously fail may now succeed). I've still hidden this feature behind an experiemntal config option so we can roll it back if needed. Differential Revision: https://phab.mercurial-scm.org/D4041
Martin von Zweigbergk - - Load All Authors

File last commit:

r35727:1a09dad8 default
r38891:7848f284 default
Show More
test-exchange-obsmarkers-case-A3.t
250 lines | 8.3 KiB | text/troff | Tads3Lexer
/ tests / test-exchange-obsmarkers-case-A3.t
History | Annotation | Raw |Copy content |Copy permalink
============================================
Testing obsolescence markers push: Cases A.3
============================================
Mercurial pushes obsolescences markers relevant to the "pushed-set", the set of
all changesets that requested to be "in sync" after the push (even if they are
already on both side).
This test belongs to a series of tests checking such set is properly computed
and applied. This does not tests "obsmarkers" discovery capabilities.
Category A: simple cases
TestCase 3: old branch split in two, only one of the new one pushed
Variants:
# a: changesets are known on remote
# b: changesets are known on remote (push needs -f)
A.3 new branchs created, one pushed.
====================================
.. {{{
.. B' ○⇢ø B
.. | |
.. \Aø⇠◔ A'
.. \|/
.. ● O
.. }}}
..
.. Markers exist from:
..
.. * `A ø⇠○ A'`
.. * `B ø⇠○ B'`
..
.. Command runs:
..
.. * hg push -r A
..
.. Expected exchange:
..
.. * chain from A
..
.. Expected exclude:
..
.. * chain from B
..
.. Extra note:
..
.. If A and B are remontly known, we should expect:
..
.. * `hg push` will complain about the new head
.. * `hg push` should complain about unstable history creation
Setup
-----
$ . $TESTDIR/testlib/exchange-obsmarker-util.sh
initial
$ setuprepos A.3.a
creating test repo for test case A.3.a
- pulldest
- main
- pushdest
cd into `main` and proceed with env setup
$ cd main
$ mkcommit A0
$ mkcommit B0
$ hg update -q 0
$ mkcommit A1
created new head
$ hg update -q 0
$ mkcommit B1
created new head
$ hg debugobsolete `getid 'desc(A0)'` `getid 'desc(A1)'`
obsoleted 1 changesets
1 new orphan changesets
$ hg debugobsolete `getid 'desc(B0)'` `getid 'desc(B1)'`
obsoleted 1 changesets
$ hg log -G --hidden
@ f6298a8ac3a4 (draft): B1
|
| o e5ea8f9c7314 (draft): A1
|/
| x 6e72f0a95b5e (draft): B0
| |
| x 28b51eb45704 (draft): A0
|/
o a9bdc8b26820 (public): O
$ inspect_obsmarkers
obsstore content
================
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
$ cd ..
$ cd ..
Actual Test for first version (changeset unknown in remote)
-----------------------------------------------------------
$ dotest A.3.a A1
## Running testcase A.3.a
# testing echange of "A1" (e5ea8f9c7314)
## initial state
# obstore: main
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
# obstore: pulldest
## pushing "A1" from main to pushdest
pushing to pushdest
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 1 changesets with 1 changes to 1 files
remote: 1 new obsolescence markers
## post push state
# obstore: main
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
## pulling "e5ea8f9c7314" from main into pulldest
pulling from main
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
1 new obsolescence markers
new changesets e5ea8f9c7314
(run 'hg update' to get a working copy)
## post pull state
# obstore: main
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
other variant: changeset known in remote
----------------------------------------
$ setuprepos A.3.b
creating test repo for test case A.3.b
- pulldest
- main
- pushdest
cd into `main` and proceed with env setup
$ cd main
$ mkcommit A0
$ mkcommit B0
$ hg push -q ../pushdest
$ hg push -q ../pulldest
$ hg update -q 0
$ mkcommit A1
created new head
$ hg update -q 0
$ mkcommit B1
created new head
$ hg debugobsolete `getid 'desc(A0)'` `getid 'desc(A1)'`
obsoleted 1 changesets
1 new orphan changesets
$ hg debugobsolete `getid 'desc(B0)'` `getid 'desc(B1)'`
obsoleted 1 changesets
$ hg log -G --hidden
@ f6298a8ac3a4 (draft): B1
|
| o e5ea8f9c7314 (draft): A1
|/
| x 6e72f0a95b5e (draft): B0
| |
| x 28b51eb45704 (draft): A0
|/
o a9bdc8b26820 (public): O
$ inspect_obsmarkers
obsstore content
================
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
$ cd ..
$ cd ..
Actual Test for first version (changeset known in remote)
-----------------------------------------------------------
check it complains about multiple heads
$ cd A.3.b
$ hg push -R main -r 'desc(A1)' pushdest
pushing to pushdest
searching for changes
abort: push creates new remote head e5ea8f9c7314!
(merge or see 'hg help push' for details about pushing new heads)
[255]
$ cd ..
test obsmarkers exchange.
$ dotest A.3.b A1 -f
## Running testcase A.3.b
# testing echange of "A1" (e5ea8f9c7314)
## initial state
# obstore: main
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
# obstore: pulldest
## pushing "A1" from main to pushdest
pushing to pushdest
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 1 changesets with 1 changes to 1 files (+1 heads)
remote: 1 new obsolescence markers
remote: obsoleted 1 changesets
remote: 1 new orphan changesets
## post push state
# obstore: main
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
## pulling "e5ea8f9c7314" from main into pulldest
pulling from main
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files (+1 heads)
1 new obsolescence markers
obsoleted 1 changesets
1 new orphan changesets
new changesets e5ea8f9c7314
(run 'hg heads' to see heads, 'hg merge' to merge)
## post pull state
# obstore: main
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}