##// END OF EJS Templates
demandimport: replace more references to _demandmod instances...
demandimport: replace more references to _demandmod instances _demandmod instances may be referenced by multiple importing modules. Before this patch, the _demandmod instance only maintained a reference to its first consumer when using the "from X import Y" syntax. This is because we only created a single _demandmod instance (attached to the parent X module). If multiple modules A and B performed "from X import Y", we'd produce a single _demandmod instance "demandmod" with the following references: X.Y = <demandmod> A.Y = <demandmod> B.Y = <demandmod> The locals from the first consumer (A) would be stored in <demandmod1>. When <demandmod1> was loaded, we'd look at the locals for the first consumer and replace the symbol, if necessary. This resulted in state: X.Y = <module> A.Y = <module> B.Y = <demandmod> B's reference to Y wasn't updated and was still using the proxy object because we just didn't record that B had a reference to <demandmod> that needed updating! With this patch, we add support for tracking which modules in addition to the initial importer have a reference to the _demandmod instance and we replace those references at module load time. In the case of posix.py, this fixes an issue where the "encoding" module was being proxied, resulting in hundreds of thousands of __getattribute__ lookups on the _demandmod instance during dirstate operations on mozilla-central, speeding up execution by many milliseconds. There are likely several other operation that benefit from this change as well. The new mechanism isn't perfect: references in locals (not globals) may likely linger. So, if there is an import inside a function and a symbol from that module is used in a hot loop, we could have unwanted overhead from proxying through _demandmod. Non-global imports are discouraged anyway. So hopefully this isn't a big deal in practice. We could potentially deploy a code checker that bans use of attribute lookups of function-level-imported modules inside loops. This deficiency in theory could be avoided by storing the set of globals and locals dicts to update in the _demandmod instance. However, I tried this and it didn't work. One reason is that some globals are _demandmod instances. We could work around this, but it's a bit more work. There also might be other module import foo at play. The solution as implemented is better than what we had and IMO is good enough for the time being. It's worth noting that this sub-optimal behavior was made worse by the introduction of absolute_import and its recommended "from . import X" syntax for importing modules from the "mercurial" package. If we ever wrote performance tests, measuring the amount of module imports and __getattribute__ proxy calls through _demandmod instances would be something I'd have it check.

File last commit:

r23964:f1c127df stable
r26457:7e813050 default
Show More
diffhelpers.c
199 lines | 4.7 KiB | text/x-c | CLexer
/*
* diffhelpers.c - helper routines for mpatch
*
* Copyright 2007 Chris Mason <chris.mason@oracle.com>
*
* This software may be used and distributed according to the terms
* of the GNU General Public License v2, incorporated herein by reference.
*/
#include <Python.h>
#include <stdlib.h>
#include <string.h>
#include "util.h"
static char diffhelpers_doc[] = "Efficient diff parsing";
static PyObject *diffhelpers_Error;
/* fixup the last lines of a and b when the patch has no newline at eof */
static void _fix_newline(PyObject *hunk, PyObject *a, PyObject *b)
{
Py_ssize_t hunksz = PyList_Size(hunk);
PyObject *s = PyList_GET_ITEM(hunk, hunksz-1);
char *l = PyBytes_AsString(s);
Py_ssize_t alen = PyList_Size(a);
Py_ssize_t blen = PyList_Size(b);
char c = l[0];
PyObject *hline;
Py_ssize_t sz = PyBytes_GET_SIZE(s);
if (sz > 1 && l[sz-2] == '\r')
/* tolerate CRLF in last line */
sz -= 1;
hline = PyBytes_FromStringAndSize(l, sz-1);
if (!hline) {
return;
}
if (c == ' ' || c == '+') {
PyObject *rline = PyBytes_FromStringAndSize(l + 1, sz - 2);
PyList_SetItem(b, blen-1, rline);
}
if (c == ' ' || c == '-') {
Py_INCREF(hline);
PyList_SetItem(a, alen-1, hline);
}
PyList_SetItem(hunk, hunksz-1, hline);
}
/* python callable form of _fix_newline */
static PyObject *
fix_newline(PyObject *self, PyObject *args)
{
PyObject *hunk, *a, *b;
if (!PyArg_ParseTuple(args, "OOO", &hunk, &a, &b))
return NULL;
_fix_newline(hunk, a, b);
return Py_BuildValue("l", 0);
}
#if (PY_VERSION_HEX < 0x02050000)
static const char *addlines_format = "OOiiOO";
#else
static const char *addlines_format = "OOnnOO";
#endif
/*
* read lines from fp into the hunk. The hunk is parsed into two arrays
* a and b. a gets the old state of the text, b gets the new state
* The control char from the hunk is saved when inserting into a, but not b
* (for performance while deleting files)
*/
static PyObject *
addlines(PyObject *self, PyObject *args)
{
PyObject *fp, *hunk, *a, *b, *x;
Py_ssize_t i;
Py_ssize_t lena, lenb;
Py_ssize_t num;
Py_ssize_t todoa, todob;
char *s, c;
PyObject *l;
if (!PyArg_ParseTuple(args, addlines_format,
&fp, &hunk, &lena, &lenb, &a, &b))
return NULL;
while (1) {
todoa = lena - PyList_Size(a);
todob = lenb - PyList_Size(b);
num = todoa > todob ? todoa : todob;
if (num == 0)
break;
for (i = 0; i < num; i++) {
x = PyFile_GetLine(fp, 0);
s = PyBytes_AsString(x);
c = *s;
if (strcmp(s, "\\ No newline at end of file\n") == 0) {
_fix_newline(hunk, a, b);
continue;
}
if (c == '\n') {
/* Some patches may be missing the control char
* on empty lines. Supply a leading space. */
Py_DECREF(x);
x = PyBytes_FromString(" \n");
}
PyList_Append(hunk, x);
if (c == '+') {
l = PyBytes_FromString(s + 1);
PyList_Append(b, l);
Py_DECREF(l);
} else if (c == '-') {
PyList_Append(a, x);
} else {
l = PyBytes_FromString(s + 1);
PyList_Append(b, l);
Py_DECREF(l);
PyList_Append(a, x);
}
Py_DECREF(x);
}
}
return Py_BuildValue("l", 0);
}
/*
* compare the lines in a with the lines in b. a is assumed to have
* a control char at the start of each line, this char is ignored in the
* compare
*/
static PyObject *
testhunk(PyObject *self, PyObject *args)
{
PyObject *a, *b;
long bstart;
Py_ssize_t alen, blen;
Py_ssize_t i;
char *sa, *sb;
if (!PyArg_ParseTuple(args, "OOl", &a, &b, &bstart))
return NULL;
alen = PyList_Size(a);
blen = PyList_Size(b);
if (alen > blen - bstart || bstart < 0) {
return Py_BuildValue("l", -1);
}
for (i = 0; i < alen; i++) {
sa = PyBytes_AsString(PyList_GET_ITEM(a, i));
sb = PyBytes_AsString(PyList_GET_ITEM(b, i + bstart));
if (strcmp(sa + 1, sb) != 0)
return Py_BuildValue("l", -1);
}
return Py_BuildValue("l", 0);
}
static PyMethodDef methods[] = {
{"addlines", addlines, METH_VARARGS, "add lines to a hunk\n"},
{"fix_newline", fix_newline, METH_VARARGS, "fixup newline counters\n"},
{"testhunk", testhunk, METH_VARARGS, "test lines in a hunk\n"},
{NULL, NULL}
};
#ifdef IS_PY3K
static struct PyModuleDef diffhelpers_module = {
PyModuleDef_HEAD_INIT,
"diffhelpers",
diffhelpers_doc,
-1,
methods
};
PyMODINIT_FUNC PyInit_diffhelpers(void)
{
PyObject *m;
m = PyModule_Create(&diffhelpers_module);
if (m == NULL)
return NULL;
diffhelpers_Error = PyErr_NewException("diffhelpers.diffhelpersError",
NULL, NULL);
Py_INCREF(diffhelpers_Error);
PyModule_AddObject(m, "diffhelpersError", diffhelpers_Error);
return m;
}
#else
PyMODINIT_FUNC
initdiffhelpers(void)
{
Py_InitModule3("diffhelpers", methods, diffhelpers_doc);
diffhelpers_Error = PyErr_NewException("diffhelpers.diffhelpersError",
NULL, NULL);
}
#endif