##// END OF EJS Templates
demandimport: replace more references to _demandmod instances...
demandimport: replace more references to _demandmod instances _demandmod instances may be referenced by multiple importing modules. Before this patch, the _demandmod instance only maintained a reference to its first consumer when using the "from X import Y" syntax. This is because we only created a single _demandmod instance (attached to the parent X module). If multiple modules A and B performed "from X import Y", we'd produce a single _demandmod instance "demandmod" with the following references: X.Y = <demandmod> A.Y = <demandmod> B.Y = <demandmod> The locals from the first consumer (A) would be stored in <demandmod1>. When <demandmod1> was loaded, we'd look at the locals for the first consumer and replace the symbol, if necessary. This resulted in state: X.Y = <module> A.Y = <module> B.Y = <demandmod> B's reference to Y wasn't updated and was still using the proxy object because we just didn't record that B had a reference to <demandmod> that needed updating! With this patch, we add support for tracking which modules in addition to the initial importer have a reference to the _demandmod instance and we replace those references at module load time. In the case of posix.py, this fixes an issue where the "encoding" module was being proxied, resulting in hundreds of thousands of __getattribute__ lookups on the _demandmod instance during dirstate operations on mozilla-central, speeding up execution by many milliseconds. There are likely several other operation that benefit from this change as well. The new mechanism isn't perfect: references in locals (not globals) may likely linger. So, if there is an import inside a function and a symbol from that module is used in a hot loop, we could have unwanted overhead from proxying through _demandmod. Non-global imports are discouraged anyway. So hopefully this isn't a big deal in practice. We could potentially deploy a code checker that bans use of attribute lookups of function-level-imported modules inside loops. This deficiency in theory could be avoided by storing the set of globals and locals dicts to update in the _demandmod instance. However, I tried this and it didn't work. One reason is that some globals are _demandmod instances. We could work around this, but it's a bit more work. There also might be other module import foo at play. The solution as implemented is better than what we had and IMO is good enough for the time being. It's worth noting that this sub-optimal behavior was made worse by the introduction of absolute_import and its recommended "from . import X" syntax for importing modules from the "mercurial" package. If we ever wrote performance tests, measuring the amount of module imports and __getattribute__ proxy calls through _demandmod instances would be something I'd have it check.

File last commit:

r25977:696f6e2b default
r26457:7e813050 default
Show More
sslutil.py
204 lines | 8.3 KiB | text/x-python | PythonLexer
# sslutil.py - SSL handling for mercurial
#
# Copyright 2005, 2006, 2007, 2008 Matt Mackall <mpm@selenic.com>
# Copyright 2006, 2007 Alexis S. L. Carvalho <alexis@cecm.usp.br>
# Copyright 2006 Vadim Gelfer <vadim.gelfer@gmail.com>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
from __future__ import absolute_import
import os
import ssl
import sys
from .i18n import _
from . import util
_canloaddefaultcerts = False
try:
ssl_context = ssl.SSLContext
_canloaddefaultcerts = util.safehasattr(ssl_context, 'load_default_certs')
def wrapsocket(sock, keyfile, certfile, ui, cert_reqs=ssl.CERT_NONE,
ca_certs=None, serverhostname=None):
# Allow any version of SSL starting with TLSv1 and
# up. Note that specifying TLSv1 here prohibits use of
# newer standards (like TLSv1_2), so this is the right way
# to do this. Note that in the future it'd be better to
# support using ssl.create_default_context(), which sets
# up a bunch of things in smart ways (strong ciphers,
# protocol versions, etc) and is upgraded by Python
# maintainers for us, but that breaks too many things to
# do it in a hurry.
sslcontext = ssl.SSLContext(ssl.PROTOCOL_SSLv23)
sslcontext.options &= ssl.OP_NO_SSLv2 & ssl.OP_NO_SSLv3
if certfile is not None:
def password():
f = keyfile or certfile
return ui.getpass(_('passphrase for %s: ') % f, '')
sslcontext.load_cert_chain(certfile, keyfile, password)
sslcontext.verify_mode = cert_reqs
if ca_certs is not None:
sslcontext.load_verify_locations(cafile=ca_certs)
elif _canloaddefaultcerts:
sslcontext.load_default_certs()
sslsocket = sslcontext.wrap_socket(sock, server_hostname=serverhostname)
# check if wrap_socket failed silently because socket had been
# closed
# - see http://bugs.python.org/issue13721
if not sslsocket.cipher():
raise util.Abort(_('ssl connection failed'))
return sslsocket
except AttributeError:
def wrapsocket(sock, keyfile, certfile, ui, cert_reqs=ssl.CERT_NONE,
ca_certs=None, serverhostname=None):
sslsocket = ssl.wrap_socket(sock, keyfile, certfile,
cert_reqs=cert_reqs, ca_certs=ca_certs,
ssl_version=ssl.PROTOCOL_TLSv1)
# check if wrap_socket failed silently because socket had been
# closed
# - see http://bugs.python.org/issue13721
if not sslsocket.cipher():
raise util.Abort(_('ssl connection failed'))
return sslsocket
def _verifycert(cert, hostname):
'''Verify that cert (in socket.getpeercert() format) matches hostname.
CRLs is not handled.
Returns error message if any problems are found and None on success.
'''
if not cert:
return _('no certificate received')
dnsname = hostname.lower()
def matchdnsname(certname):
return (certname == dnsname or
'.' in dnsname and certname == '*.' + dnsname.split('.', 1)[1])
san = cert.get('subjectAltName', [])
if san:
certnames = [value.lower() for key, value in san if key == 'DNS']
for name in certnames:
if matchdnsname(name):
return None
if certnames:
return _('certificate is for %s') % ', '.join(certnames)
# subject is only checked when subjectAltName is empty
for s in cert.get('subject', []):
key, value = s[0]
if key == 'commonName':
try:
# 'subject' entries are unicode
certname = value.lower().encode('ascii')
except UnicodeEncodeError:
return _('IDN in certificate not supported')
if matchdnsname(certname):
return None
return _('certificate is for %s') % certname
return _('no commonName or subjectAltName found in certificate')
# CERT_REQUIRED means fetch the cert from the server all the time AND
# validate it against the CA store provided in web.cacerts.
def _plainapplepython():
"""return true if this seems to be a pure Apple Python that
* is unfrozen and presumably has the whole mercurial module in the file
system
* presumably is an Apple Python that uses Apple OpenSSL which has patches
for using system certificate store CAs in addition to the provided
cacerts file
"""
if sys.platform != 'darwin' or util.mainfrozen() or not sys.executable:
return False
exe = os.path.realpath(sys.executable).lower()
return (exe.startswith('/usr/bin/python') or
exe.startswith('/system/library/frameworks/python.framework/'))
def _defaultcacerts():
"""return path to CA certificates; None for system's store; ! to disable"""
if _plainapplepython():
dummycert = os.path.join(os.path.dirname(__file__), 'dummycert.pem')
if os.path.exists(dummycert):
return dummycert
if _canloaddefaultcerts:
return None
return '!'
def sslkwargs(ui, host):
kws = {'ui': ui}
hostfingerprint = ui.config('hostfingerprints', host)
if hostfingerprint:
return kws
cacerts = ui.config('web', 'cacerts')
if cacerts == '!':
pass
elif cacerts:
cacerts = util.expandpath(cacerts)
if not os.path.exists(cacerts):
raise util.Abort(_('could not find web.cacerts: %s') % cacerts)
else:
cacerts = _defaultcacerts()
if cacerts and cacerts != '!':
ui.debug('using %s to enable OS X system CA\n' % cacerts)
ui.setconfig('web', 'cacerts', cacerts, 'defaultcacerts')
if cacerts != '!':
kws.update({'ca_certs': cacerts,
'cert_reqs': ssl.CERT_REQUIRED,
})
return kws
class validator(object):
def __init__(self, ui, host):
self.ui = ui
self.host = host
def __call__(self, sock, strict=False):
host = self.host
cacerts = self.ui.config('web', 'cacerts')
hostfingerprint = self.ui.config('hostfingerprints', host)
if not sock.cipher(): # work around http://bugs.python.org/issue13721
raise util.Abort(_('%s ssl connection error') % host)
try:
peercert = sock.getpeercert(True)
peercert2 = sock.getpeercert()
except AttributeError:
raise util.Abort(_('%s ssl connection error') % host)
if not peercert:
raise util.Abort(_('%s certificate error: '
'no certificate received') % host)
peerfingerprint = util.sha1(peercert).hexdigest()
nicefingerprint = ":".join([peerfingerprint[x:x + 2]
for x in xrange(0, len(peerfingerprint), 2)])
if hostfingerprint:
if peerfingerprint.lower() != \
hostfingerprint.replace(':', '').lower():
raise util.Abort(_('certificate for %s has unexpected '
'fingerprint %s') % (host, nicefingerprint),
hint=_('check hostfingerprint configuration'))
self.ui.debug('%s certificate matched fingerprint %s\n' %
(host, nicefingerprint))
elif cacerts != '!':
msg = _verifycert(peercert2, host)
if msg:
raise util.Abort(_('%s certificate error: %s') % (host, msg),
hint=_('configure hostfingerprint %s or use '
'--insecure to connect insecurely') %
nicefingerprint)
self.ui.debug('%s certificate successfully verified\n' % host)
elif strict:
raise util.Abort(_('%s certificate with fingerprint %s not '
'verified') % (host, nicefingerprint),
hint=_('check hostfingerprints or web.cacerts '
'config setting'))
else:
self.ui.warn(_('warning: %s certificate with fingerprint %s not '
'verified (check hostfingerprints or web.cacerts '
'config setting)\n') %
(host, nicefingerprint))