##// END OF EJS Templates
match: match explicit file using a set...
match: match explicit file using a set The matcher as all the logic to do quick comparison against explicit patterns, however the pattern matcher was shadowing the code using that set and used the compiled regex pattern in all cases, which is quite slow. We restore the usage of the set based matching to boost performance. Building the regexp is still consuming a large amount of time (actually, the majority of the time), which is still silly. Maybe using re2 would help that, but this is a quest for another adventure. Another path to improve this is to have a pattern type dedicated to match the exact path to a file only (not a directory). This pattern could use the set matching only and be skipped in the regex all together. Benchmarks ========== In the following benchmark we are comparing the `hg cat` and `hg files` run time when matching against all files in the repository. They are run: - without the rust extensions - with the standard python engine (so without re2) Performance improvement in this series -------------------------------------- ###### hg files ############################################################### ### mercurial-2018-08-01-zstd-sparse-revlog ### sorted base-changeset: 0.230092 seconds prev-changeset: 0.230069 seconds this-changeset: 0.211425 seconds (-8.36%) ### mercurial-2018-08-01-zstd-sparse-revlog ### shuffled base-changeset: 0.234235 seconds prev-changeset: 0.231165 seconds (-1.38%) this-changeset: 0.212300 seconds (-9.43%) ### pypy-2018-08-01-zstd-sparse-revlog ### sorted base-changeset: 0.613567 seconds prev-changeset: 0.616799 seconds this-changeset: 0.510852 seconds (-16.82%) ### pypy-2018-08-01-zstd-sparse-revlog ### shuffled base-changeset: 0.801880 seconds prev-changeset: 0.616393 seconds (-23.22%) this-changeset: 0.511903 seconds (-36.23%) ### netbeans-2018-08-01-zstd-sparse-revlog ### sorted base-changeset: 21.541828 seconds prev-changeset: 21.586773 seconds this-changeset: 13.648347 seconds (-36.76%) ### netbeans-2018-08-01-zstd-sparse-revlog ### shuffled base-changeset: 172.759857 seconds prev-changeset: 21.908197 seconds (-87.32%) this-changeset: 13.945110 seconds (-91.93%) ### mozilla-central-2018-08-01-zstd-sparse-revlog ### sorted base-changeset: 62.474221 seconds prev-changeset: 61.279490 seconds (-1.22%) this-changeset: 29.529469 seconds (-52.40%) ### mozilla-central-2018-08-01-zstd-sparse-revlog ### shuffled base-changeset: 1364.180218 seconds prev-changeset: 62.473549 seconds (-95.40%) this-changeset: 30.625249 seconds (-97.75%) ###### hg cat ################################################################# ### mercurial-2018-08-01-zstd-sparse-revlog ### sorted base-changeset: 0.764407 seconds prev-changeset: 0.763883 seconds this-changeset: 0.737326 seconds (-3.68%) ### mercurial-2018-08-01-zstd-sparse-revlog ### shuffled base-changeset: 0.768924 seconds prev-changeset: 0.765848 seconds this-changeset: 0.174d0b seconds (-4.44%) ### pypy-2018-08-01-zstd-sparse-revlog ### sorted base-changeset: 2.065220 seconds prev-changeset: 2.070498 seconds this-changeset: 1.939482 seconds (-6.08%) ### pypy-2018-08-01-zstd-sparse-revlog ### shuffled base-changeset: 2.276388 seconds prev-changeset: 2.069197 seconds (-9.15%) this-changeset: 1.931746 seconds (-15.19%) ### netbeans-2018-08-01-zstd-sparse-revlog ### sorted base-changeset: 40.967983 seconds prev-changeset: 41.392423 seconds this-changeset: 32.181681 seconds (-22.20%) ### netbeans-2018-08-01-zstd-sparse-revlog ### shuffled base-changeset: 216.388709 seconds prev-changeset: 41.648689 seconds (-80.88%) this-changeset: 32.580817 seconds (-85.04%) ### mozilla-central-2018-08-01-zstd-sparse-revlog ### sorted base-changeset: 105.228510 seconds prev-changeset: 103.315670 seconds (-1.23%) this-changeset: 69.416118 seconds (-33.64%) ### mozilla-central-2018-08-01-zstd-sparse-revlog ### shuffled base-changeset: 1448.722784 seconds prev-changeset: 104.369358 seconds (-92.80%) this-changeset: 70.554789 seconds (-95.13%) Different way to list the same data with this revision ------------------------------------------------------ ###### hg files ############################################################### ### mercurial-2018-08-01-zstd-sparse-revlog root: 0.119182 seconds glob: 0.120697 seconds (+1.27%) sorted: 0.211425 seconds (+77.40%) shuffled: 0.212300 seconds (+78.13%) ### pypy-2018-08-01-zstd-sparse-revlog root: 0.121986 seconds glob: 0.124822 seconds (+2.32%) sorted: 0.510852 seconds (+318.78%) shuffled: 0.511903 seconds (+319.64%) ### netbeans-2018-08-01-zstd-sparse-revlog root: 0.173984 seconds glob: 0.227203 seconds (+30.59%) sorted: 13.648347 seconds (+7744.59%) shuffled: 13.945110 seconds (+7915.16%) ### mozilla-central-2018-08-01-zstd-sparse-revlog root: 0.366463 seconds glob: 0.491030 seconds (+33.99%) sorted: 29.529469 seconds (+7957.96%) shuffled: 30.625249 seconds (+8256.97%) ###### hg cat ################################################################# ### mercurial-2018-08-01-zstd-sparse-revlog glob: 0.647471 seconds root: 0.643120 seconds shuffled: 0.174d0b seconds (+13.92%) sorted: 0.737326 seconds (+13.88%) ### mozilla-central-2018-08-01-zstd-sparse-revlog glob: 40.596983 seconds root: 40.129136 seconds shuffled: 70.554789 seconds (+73.79%) sorted: 69.416118 seconds (+70.99%) ### netbeans-2018-08-01-zstd-sparse-revlog glob: 18.777924 seconds root: 18.613905 seconds shuffled: 32.580817 seconds (+73.51%) sorted: 32.181681 seconds (+71.38%) ### pypy-2018-08-01-zstd-sparse-revlog glob: 1.555319 seconds root: 1.536534 seconds shuffled: 1.931746 seconds (+24.20%) sorted: 1.939482 seconds (+24.70%)

File last commit:

r51245:4be9ecc9 stable
r51286:81c7d04f stable
Show More
store.py
848 lines | 25.1 KiB | text/x-python | PythonLexer
# store.py - repository store handling for Mercurial
#
# Copyright 2008 Olivia Mackall <olivia@selenic.com>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
import functools
import os
import re
import stat
from .i18n import _
from .pycompat import getattr
from .node import hex
from . import (
changelog,
error,
manifest,
policy,
pycompat,
util,
vfs as vfsmod,
)
from .utils import hashutil
parsers = policy.importmod('parsers')
# how much bytes should be read from fncache in one read
# It is done to prevent loading large fncache files into memory
fncache_chunksize = 10 ** 6
def _matchtrackedpath(path, matcher):
"""parses a fncache entry and returns whether the entry is tracking a path
matched by matcher or not.
If matcher is None, returns True"""
if matcher is None:
return True
path = decodedir(path)
if path.startswith(b'data/'):
return matcher(path[len(b'data/') : -len(b'.i')])
elif path.startswith(b'meta/'):
return matcher.visitdir(path[len(b'meta/') : -len(b'/00manifest.i')])
raise error.ProgrammingError(b"cannot decode path %s" % path)
# This avoids a collision between a file named foo and a dir named
# foo.i or foo.d
def _encodedir(path):
"""
>>> _encodedir(b'data/foo.i')
'data/foo.i'
>>> _encodedir(b'data/foo.i/bla.i')
'data/foo.i.hg/bla.i'
>>> _encodedir(b'data/foo.i.hg/bla.i')
'data/foo.i.hg.hg/bla.i'
>>> _encodedir(b'data/foo.i\\ndata/foo.i/bla.i\\ndata/foo.i.hg/bla.i\\n')
'data/foo.i\\ndata/foo.i.hg/bla.i\\ndata/foo.i.hg.hg/bla.i\\n'
"""
return (
path.replace(b".hg/", b".hg.hg/")
.replace(b".i/", b".i.hg/")
.replace(b".d/", b".d.hg/")
)
encodedir = getattr(parsers, 'encodedir', _encodedir)
def decodedir(path):
"""
>>> decodedir(b'data/foo.i')
'data/foo.i'
>>> decodedir(b'data/foo.i.hg/bla.i')
'data/foo.i/bla.i'
>>> decodedir(b'data/foo.i.hg.hg/bla.i')
'data/foo.i.hg/bla.i'
"""
if b".hg/" not in path:
return path
return (
path.replace(b".d.hg/", b".d/")
.replace(b".i.hg/", b".i/")
.replace(b".hg.hg/", b".hg/")
)
def _reserved():
"""characters that are problematic for filesystems
* ascii escapes (0..31)
* ascii hi (126..255)
* windows specials
these characters will be escaped by encodefunctions
"""
winreserved = [ord(x) for x in u'\\:*?"<>|']
for x in range(32):
yield x
for x in range(126, 256):
yield x
for x in winreserved:
yield x
def _buildencodefun():
"""
>>> enc, dec = _buildencodefun()
>>> enc(b'nothing/special.txt')
'nothing/special.txt'
>>> dec(b'nothing/special.txt')
'nothing/special.txt'
>>> enc(b'HELLO')
'_h_e_l_l_o'
>>> dec(b'_h_e_l_l_o')
'HELLO'
>>> enc(b'hello:world?')
'hello~3aworld~3f'
>>> dec(b'hello~3aworld~3f')
'hello:world?'
>>> enc(b'the\\x07quick\\xADshot')
'the~07quick~adshot'
>>> dec(b'the~07quick~adshot')
'the\\x07quick\\xadshot'
"""
e = b'_'
xchr = pycompat.bytechr
asciistr = list(map(xchr, range(127)))
capitals = list(range(ord(b"A"), ord(b"Z") + 1))
cmap = {x: x for x in asciistr}
for x in _reserved():
cmap[xchr(x)] = b"~%02x" % x
for x in capitals + [ord(e)]:
cmap[xchr(x)] = e + xchr(x).lower()
dmap = {}
for k, v in cmap.items():
dmap[v] = k
def decode(s):
i = 0
while i < len(s):
for l in range(1, 4):
try:
yield dmap[s[i : i + l]]
i += l
break
except KeyError:
pass
else:
raise KeyError
return (
lambda s: b''.join([cmap[s[c : c + 1]] for c in range(len(s))]),
lambda s: b''.join(list(decode(s))),
)
_encodefname, _decodefname = _buildencodefun()
def encodefilename(s):
"""
>>> encodefilename(b'foo.i/bar.d/bla.hg/hi:world?/HELLO')
'foo.i.hg/bar.d.hg/bla.hg.hg/hi~3aworld~3f/_h_e_l_l_o'
"""
return _encodefname(encodedir(s))
def decodefilename(s):
"""
>>> decodefilename(b'foo.i.hg/bar.d.hg/bla.hg.hg/hi~3aworld~3f/_h_e_l_l_o')
'foo.i/bar.d/bla.hg/hi:world?/HELLO'
"""
return decodedir(_decodefname(s))
def _buildlowerencodefun():
"""
>>> f = _buildlowerencodefun()
>>> f(b'nothing/special.txt')
'nothing/special.txt'
>>> f(b'HELLO')
'hello'
>>> f(b'hello:world?')
'hello~3aworld~3f'
>>> f(b'the\\x07quick\\xADshot')
'the~07quick~adshot'
"""
xchr = pycompat.bytechr
cmap = {xchr(x): xchr(x) for x in range(127)}
for x in _reserved():
cmap[xchr(x)] = b"~%02x" % x
for x in range(ord(b"A"), ord(b"Z") + 1):
cmap[xchr(x)] = xchr(x).lower()
def lowerencode(s):
return b"".join([cmap[c] for c in pycompat.iterbytestr(s)])
return lowerencode
lowerencode = getattr(parsers, 'lowerencode', None) or _buildlowerencodefun()
# Windows reserved names: con, prn, aux, nul, com1..com9, lpt1..lpt9
_winres3 = (b'aux', b'con', b'prn', b'nul') # length 3
_winres4 = (b'com', b'lpt') # length 4 (with trailing 1..9)
def _auxencode(path, dotencode):
"""
Encodes filenames containing names reserved by Windows or which end in
period or space. Does not touch other single reserved characters c.
Specifically, c in '\\:*?"<>|' or ord(c) <= 31 are *not* encoded here.
Additionally encodes space or period at the beginning, if dotencode is
True. Parameter path is assumed to be all lowercase.
A segment only needs encoding if a reserved name appears as a
basename (e.g. "aux", "aux.foo"). A directory or file named "foo.aux"
doesn't need encoding.
>>> s = b'.foo/aux.txt/txt.aux/con/prn/nul/foo.'
>>> _auxencode(s.split(b'/'), True)
['~2efoo', 'au~78.txt', 'txt.aux', 'co~6e', 'pr~6e', 'nu~6c', 'foo~2e']
>>> s = b'.com1com2/lpt9.lpt4.lpt1/conprn/com0/lpt0/foo.'
>>> _auxencode(s.split(b'/'), False)
['.com1com2', 'lp~749.lpt4.lpt1', 'conprn', 'com0', 'lpt0', 'foo~2e']
>>> _auxencode([b'foo. '], True)
['foo.~20']
>>> _auxencode([b' .foo'], True)
['~20.foo']
"""
for i, n in enumerate(path):
if not n:
continue
if dotencode and n[0] in b'. ':
n = b"~%02x" % ord(n[0:1]) + n[1:]
path[i] = n
else:
l = n.find(b'.')
if l == -1:
l = len(n)
if (l == 3 and n[:3] in _winres3) or (
l == 4
and n[3:4] <= b'9'
and n[3:4] >= b'1'
and n[:3] in _winres4
):
# encode third letter ('aux' -> 'au~78')
ec = b"~%02x" % ord(n[2:3])
n = n[0:2] + ec + n[3:]
path[i] = n
if n[-1] in b'. ':
# encode last period or space ('foo...' -> 'foo..~2e')
path[i] = n[:-1] + b"~%02x" % ord(n[-1:])
return path
_maxstorepathlen = 120
_dirprefixlen = 8
_maxshortdirslen = 8 * (_dirprefixlen + 1) - 4
def _hashencode(path, dotencode):
digest = hex(hashutil.sha1(path).digest())
le = lowerencode(path[5:]).split(b'/') # skips prefix 'data/' or 'meta/'
parts = _auxencode(le, dotencode)
basename = parts[-1]
_root, ext = os.path.splitext(basename)
sdirs = []
sdirslen = 0
for p in parts[:-1]:
d = p[:_dirprefixlen]
if d[-1] in b'. ':
# Windows can't access dirs ending in period or space
d = d[:-1] + b'_'
if sdirslen == 0:
t = len(d)
else:
t = sdirslen + 1 + len(d)
if t > _maxshortdirslen:
break
sdirs.append(d)
sdirslen = t
dirs = b'/'.join(sdirs)
if len(dirs) > 0:
dirs += b'/'
res = b'dh/' + dirs + digest + ext
spaceleft = _maxstorepathlen - len(res)
if spaceleft > 0:
filler = basename[:spaceleft]
res = b'dh/' + dirs + filler + digest + ext
return res
def _hybridencode(path, dotencode):
"""encodes path with a length limit
Encodes all paths that begin with 'data/', according to the following.
Default encoding (reversible):
Encodes all uppercase letters 'X' as '_x'. All reserved or illegal
characters are encoded as '~xx', where xx is the two digit hex code
of the character (see encodefilename).
Relevant path components consisting of Windows reserved filenames are
masked by encoding the third character ('aux' -> 'au~78', see _auxencode).
Hashed encoding (not reversible):
If the default-encoded path is longer than _maxstorepathlen, a
non-reversible hybrid hashing of the path is done instead.
This encoding uses up to _dirprefixlen characters of all directory
levels of the lowerencoded path, but not more levels than can fit into
_maxshortdirslen.
Then follows the filler followed by the sha digest of the full path.
The filler is the beginning of the basename of the lowerencoded path
(the basename is everything after the last path separator). The filler
is as long as possible, filling in characters from the basename until
the encoded path has _maxstorepathlen characters (or all chars of the
basename have been taken).
The extension (e.g. '.i' or '.d') is preserved.
The string 'data/' at the beginning is replaced with 'dh/', if the hashed
encoding was used.
"""
path = encodedir(path)
ef = _encodefname(path).split(b'/')
res = b'/'.join(_auxencode(ef, dotencode))
if len(res) > _maxstorepathlen:
res = _hashencode(path, dotencode)
return res
def _pathencode(path):
de = encodedir(path)
if len(path) > _maxstorepathlen:
return _hashencode(de, True)
ef = _encodefname(de).split(b'/')
res = b'/'.join(_auxencode(ef, True))
if len(res) > _maxstorepathlen:
return _hashencode(de, True)
return res
_pathencode = getattr(parsers, 'pathencode', _pathencode)
def _plainhybridencode(f):
return _hybridencode(f, False)
def _calcmode(vfs):
try:
# files in .hg/ will be created using this mode
mode = vfs.stat().st_mode
# avoid some useless chmods
if (0o777 & ~util.umask) == (0o777 & mode):
mode = None
except OSError:
mode = None
return mode
_data = [
b'bookmarks',
b'narrowspec',
b'data',
b'meta',
b'00manifest.d',
b'00manifest.i',
b'00changelog.d',
b'00changelog.i',
b'phaseroots',
b'obsstore',
b'requires',
]
REVLOG_FILES_MAIN_EXT = (b'.i', b'i.tmpcensored')
REVLOG_FILES_OTHER_EXT = (
b'.idx',
b'.d',
b'.dat',
b'.n',
b'.nd',
b'.sda',
b'd.tmpcensored',
)
# files that are "volatile" and might change between listing and streaming
#
# note: the ".nd" file are nodemap data and won't "change" but they might be
# deleted.
REVLOG_FILES_VOLATILE_EXT = (b'.n', b'.nd')
# some exception to the above matching
#
# XXX This is currently not in use because of issue6542
EXCLUDED = re.compile(br'.*undo\.[^/]+\.(nd?|i)$')
def is_revlog(f, kind, st):
if kind != stat.S_IFREG:
return None
return revlog_type(f)
def revlog_type(f):
# XXX we need to filter `undo.` created by the transaction here, however
# being naive about it also filter revlog for `undo.*` files, leading to
# issue6542. So we no longer use EXCLUDED.
if f.endswith(REVLOG_FILES_MAIN_EXT):
return FILEFLAGS_REVLOG_MAIN
elif f.endswith(REVLOG_FILES_OTHER_EXT):
t = FILETYPE_FILELOG_OTHER
if f.endswith(REVLOG_FILES_VOLATILE_EXT):
t |= FILEFLAGS_VOLATILE
return t
return None
# the file is part of changelog data
FILEFLAGS_CHANGELOG = 1 << 13
# the file is part of manifest data
FILEFLAGS_MANIFESTLOG = 1 << 12
# the file is part of filelog data
FILEFLAGS_FILELOG = 1 << 11
# file that are not directly part of a revlog
FILEFLAGS_OTHER = 1 << 10
# the main entry point for a revlog
FILEFLAGS_REVLOG_MAIN = 1 << 1
# a secondary file for a revlog
FILEFLAGS_REVLOG_OTHER = 1 << 0
# files that are "volatile" and might change between listing and streaming
FILEFLAGS_VOLATILE = 1 << 20
FILETYPE_CHANGELOG_MAIN = FILEFLAGS_CHANGELOG | FILEFLAGS_REVLOG_MAIN
FILETYPE_CHANGELOG_OTHER = FILEFLAGS_CHANGELOG | FILEFLAGS_REVLOG_OTHER
FILETYPE_MANIFESTLOG_MAIN = FILEFLAGS_MANIFESTLOG | FILEFLAGS_REVLOG_MAIN
FILETYPE_MANIFESTLOG_OTHER = FILEFLAGS_MANIFESTLOG | FILEFLAGS_REVLOG_OTHER
FILETYPE_FILELOG_MAIN = FILEFLAGS_FILELOG | FILEFLAGS_REVLOG_MAIN
FILETYPE_FILELOG_OTHER = FILEFLAGS_FILELOG | FILEFLAGS_REVLOG_OTHER
FILETYPE_OTHER = FILEFLAGS_OTHER
class basicstore:
'''base class for local repository stores'''
def __init__(self, path, vfstype):
vfs = vfstype(path)
self.path = vfs.base
self.createmode = _calcmode(vfs)
vfs.createmode = self.createmode
self.rawvfs = vfs
self.vfs = vfsmod.filtervfs(vfs, encodedir)
self.opener = self.vfs
def join(self, f):
return self.path + b'/' + encodedir(f)
def _walk(self, relpath, recurse):
'''yields (revlog_type, unencoded, size)'''
path = self.path
if relpath:
path += b'/' + relpath
striplen = len(self.path) + 1
l = []
if self.rawvfs.isdir(path):
visit = [path]
readdir = self.rawvfs.readdir
while visit:
p = visit.pop()
for f, kind, st in readdir(p, stat=True):
fp = p + b'/' + f
rl_type = is_revlog(f, kind, st)
if rl_type is not None:
n = util.pconvert(fp[striplen:])
l.append((rl_type, decodedir(n), st.st_size))
elif kind == stat.S_IFDIR and recurse:
visit.append(fp)
l.sort()
return l
def changelog(self, trypending, concurrencychecker=None):
return changelog.changelog(
self.vfs,
trypending=trypending,
concurrencychecker=concurrencychecker,
)
def manifestlog(self, repo, storenarrowmatch):
rootstore = manifest.manifestrevlog(repo.nodeconstants, self.vfs)
return manifest.manifestlog(self.vfs, repo, rootstore, storenarrowmatch)
def datafiles(self, matcher=None, undecodable=None):
"""Like walk, but excluding the changelog and root manifest.
When [undecodable] is None, revlogs names that can't be
decoded cause an exception. When it is provided, it should
be a list and the filenames that can't be decoded are added
to it instead. This is very rarely needed."""
files = self._walk(b'data', True) + self._walk(b'meta', True)
for (t, u, s) in files:
yield (FILEFLAGS_FILELOG | t, u, s)
def topfiles(self):
# yield manifest before changelog
files = reversed(self._walk(b'', False))
for (t, u, s) in files:
if u.startswith(b'00changelog'):
yield (FILEFLAGS_CHANGELOG | t, u, s)
elif u.startswith(b'00manifest'):
yield (FILEFLAGS_MANIFESTLOG | t, u, s)
else:
yield (FILETYPE_OTHER | t, u, s)
def walk(self, matcher=None):
"""return file related to data storage (ie: revlogs)
yields (file_type, unencoded, size)
if a matcher is passed, storage files of only those tracked paths
are passed with matches the matcher
"""
# yield data files first
for x in self.datafiles(matcher):
yield x
for x in self.topfiles():
yield x
def copylist(self):
return _data
def write(self, tr):
pass
def invalidatecaches(self):
pass
def markremoved(self, fn):
pass
def __contains__(self, path):
'''Checks if the store contains path'''
path = b"/".join((b"data", path))
# file?
if self.vfs.exists(path + b".i"):
return True
# dir?
if not path.endswith(b"/"):
path = path + b"/"
return self.vfs.exists(path)
class encodedstore(basicstore):
def __init__(self, path, vfstype):
vfs = vfstype(path + b'/store')
self.path = vfs.base
self.createmode = _calcmode(vfs)
vfs.createmode = self.createmode
self.rawvfs = vfs
self.vfs = vfsmod.filtervfs(vfs, encodefilename)
self.opener = self.vfs
# note: topfiles would also need a decode phase. It is just that in
# practice we do not have any file outside of `data/` that needs encoding.
# However that might change so we should probably add a test and encoding
# decoding for it too. see issue6548
def datafiles(self, matcher=None, undecodable=None):
for t, f1, size in super(encodedstore, self).datafiles():
try:
f2 = decodefilename(f1)
except KeyError:
if undecodable is None:
msg = _(b'undecodable revlog name %s') % f1
raise error.StorageError(msg)
else:
undecodable.append(f1)
continue
if not _matchtrackedpath(f2, matcher):
continue
yield t, f2, size
def join(self, f):
return self.path + b'/' + encodefilename(f)
def copylist(self):
return [b'requires', b'00changelog.i'] + [b'store/' + f for f in _data]
class fncache:
# the filename used to be partially encoded
# hence the encodedir/decodedir dance
def __init__(self, vfs):
self.vfs = vfs
self._ignores = set()
self.entries = None
self._dirty = False
# set of new additions to fncache
self.addls = set()
def ensureloaded(self, warn=None):
"""read the fncache file if not already read.
If the file on disk is corrupted, raise. If warn is provided,
warn and keep going instead."""
if self.entries is None:
self._load(warn)
def _load(self, warn=None):
'''fill the entries from the fncache file'''
self._dirty = False
try:
fp = self.vfs(b'fncache', mode=b'rb')
except IOError:
# skip nonexistent file
self.entries = set()
return
self.entries = set()
chunk = b''
for c in iter(functools.partial(fp.read, fncache_chunksize), b''):
chunk += c
try:
p = chunk.rindex(b'\n')
self.entries.update(decodedir(chunk[: p + 1]).splitlines())
chunk = chunk[p + 1 :]
except ValueError:
# substring '\n' not found, maybe the entry is bigger than the
# chunksize, so let's keep iterating
pass
if chunk:
msg = _(b"fncache does not ends with a newline")
if warn:
warn(msg + b'\n')
else:
raise error.Abort(
msg,
hint=_(
b"use 'hg debugrebuildfncache' to "
b"rebuild the fncache"
),
)
self._checkentries(fp, warn)
fp.close()
def _checkentries(self, fp, warn):
"""make sure there is no empty string in entries"""
if b'' in self.entries:
fp.seek(0)
for n, line in enumerate(fp):
if not line.rstrip(b'\n'):
t = _(b'invalid entry in fncache, line %d') % (n + 1)
if warn:
warn(t + b'\n')
else:
raise error.Abort(t)
def write(self, tr):
if self._dirty:
assert self.entries is not None
self.entries = self.entries | self.addls
self.addls = set()
tr.addbackup(b'fncache')
fp = self.vfs(b'fncache', mode=b'wb', atomictemp=True)
if self.entries:
fp.write(encodedir(b'\n'.join(self.entries) + b'\n'))
fp.close()
self._dirty = False
if self.addls:
# if we have just new entries, let's append them to the fncache
tr.addbackup(b'fncache')
fp = self.vfs(b'fncache', mode=b'ab', atomictemp=True)
if self.addls:
fp.write(encodedir(b'\n'.join(self.addls) + b'\n'))
fp.close()
self.entries = None
self.addls = set()
def addignore(self, fn):
self._ignores.add(fn)
def add(self, fn):
if fn in self._ignores:
return
if self.entries is None:
self._load()
if fn not in self.entries:
self.addls.add(fn)
def remove(self, fn):
if self.entries is None:
self._load()
if fn in self.addls:
self.addls.remove(fn)
return
try:
self.entries.remove(fn)
self._dirty = True
except KeyError:
pass
def __contains__(self, fn):
if fn in self.addls:
return True
if self.entries is None:
self._load()
return fn in self.entries
def __iter__(self):
if self.entries is None:
self._load()
return iter(self.entries | self.addls)
class _fncachevfs(vfsmod.proxyvfs):
def __init__(self, vfs, fnc, encode):
vfsmod.proxyvfs.__init__(self, vfs)
self.fncache = fnc
self.encode = encode
def __call__(self, path, mode=b'r', *args, **kw):
encoded = self.encode(path)
if mode not in (b'r', b'rb') and (
path.startswith(b'data/') or path.startswith(b'meta/')
):
# do not trigger a fncache load when adding a file that already is
# known to exist.
notload = self.fncache.entries is None and self.vfs.exists(encoded)
if notload and b'r+' in mode and not self.vfs.stat(encoded).st_size:
# when appending to an existing file, if the file has size zero,
# it should be considered as missing. Such zero-size files are
# the result of truncation when a transaction is aborted.
notload = False
if not notload:
self.fncache.add(path)
return self.vfs(encoded, mode, *args, **kw)
def join(self, path):
if path:
return self.vfs.join(self.encode(path))
else:
return self.vfs.join(path)
def register_file(self, path):
"""generic hook point to lets fncache steer its stew"""
if path.startswith(b'data/') or path.startswith(b'meta/'):
self.fncache.add(path)
class fncachestore(basicstore):
def __init__(self, path, vfstype, dotencode):
if dotencode:
encode = _pathencode
else:
encode = _plainhybridencode
self.encode = encode
vfs = vfstype(path + b'/store')
self.path = vfs.base
self.pathsep = self.path + b'/'
self.createmode = _calcmode(vfs)
vfs.createmode = self.createmode
self.rawvfs = vfs
fnc = fncache(vfs)
self.fncache = fnc
self.vfs = _fncachevfs(vfs, fnc, encode)
self.opener = self.vfs
def join(self, f):
return self.pathsep + self.encode(f)
def getsize(self, path):
return self.rawvfs.stat(path).st_size
def datafiles(self, matcher=None, undecodable=None):
for f in sorted(self.fncache):
if not _matchtrackedpath(f, matcher):
continue
ef = self.encode(f)
try:
t = revlog_type(f)
assert t is not None, f
t |= FILEFLAGS_FILELOG
yield t, f, self.getsize(ef)
except FileNotFoundError:
pass
def copylist(self):
d = (
b'bookmarks',
b'narrowspec',
b'data',
b'meta',
b'dh',
b'fncache',
b'phaseroots',
b'obsstore',
b'00manifest.d',
b'00manifest.i',
b'00changelog.d',
b'00changelog.i',
b'requires',
)
return [b'requires', b'00changelog.i'] + [b'store/' + f for f in d]
def write(self, tr):
self.fncache.write(tr)
def invalidatecaches(self):
self.fncache.entries = None
self.fncache.addls = set()
def markremoved(self, fn):
self.fncache.remove(fn)
def _exists(self, f):
ef = self.encode(f)
try:
self.getsize(ef)
return True
except FileNotFoundError:
return False
def __contains__(self, path):
'''Checks if the store contains path'''
path = b"/".join((b"data", path))
# check for files (exact match)
e = path + b'.i'
if e in self.fncache and self._exists(e):
return True
# now check for directories (prefix match)
if not path.endswith(b'/'):
path += b'/'
for e in self.fncache:
if e.startswith(path) and self._exists(e):
return True
return False