upstream/mercurial-mirror Files · mercurial/help/config.txt

The Mercurial system uses a set of configuration files to control

aspects of its behavior.

Troubleshooting

===============

If you're having problems with your configuration,

:hg:`config --debug` can help you understand what is introducing

a setting into your environment.

See :hg:`help config.syntax` and :hg:`help config.files`

for information about how and where to override things.

Structure

=========

The configuration files use a simple ini-file format. A configuration

file consists of sections, led by a ``[section]`` header and followed

by ``name = value`` entries::

[ui]

username = Firstname Lastname <firstname.lastname@example.net>

verbose = True

The above entries will be referred to as ``ui.username`` and

``ui.verbose``, respectively. See :hg:`help config.syntax`.

Files

=====

Mercurial reads configuration data from several files, if they exist.

These files do not exist by default and you will have to create the

appropriate configuration files yourself:

Local configuration is put into the per-repository ``<repo>/.hg/hgrc`` file.

Global configuration like the username setting is typically put into:

.. container:: windows

- ``%USERPROFILE%\mercurial.ini`` (on Windows)

.. container:: unix.plan9

- ``$HOME/.hgrc`` (on Unix, Plan9)

The names of these files depend on the system on which Mercurial is

installed. ``*.rc`` files from a single directory are read in

alphabetical order, later ones overriding earlier ones. Where multiple

paths are given below, settings from earlier paths override later

ones.

.. container:: verbose.unix

On Unix, the following files are consulted:

- ``<repo>/.hg/hgrc`` (per-repository)

- ``$HOME/.hgrc`` (per-user)

- ``<install-root>/etc/mercurial/hgrc`` (per-installation)

- ``<install-root>/etc/mercurial/hgrc.d/*.rc`` (per-installation)

- ``/etc/mercurial/hgrc`` (per-system)

- ``/etc/mercurial/hgrc.d/*.rc`` (per-system)

- ``<internal>/default.d/*.rc`` (defaults)

.. container:: verbose.windows

On Windows, the following files are consulted:

- ``<repo>/.hg/hgrc`` (per-repository)

- ``%USERPROFILE%\.hgrc`` (per-user)

- ``%USERPROFILE%\Mercurial.ini`` (per-user)

- ``%HOME%\.hgrc`` (per-user)

- ``%HOME%\Mercurial.ini`` (per-user)

- ``HKEY_LOCAL_MACHINE\SOFTWARE\Mercurial`` (per-installation)

- ``<install-dir>\hgrc.d\*.rc`` (per-installation)

- ``<install-dir>\Mercurial.ini`` (per-installation)

- ``<internal>/default.d/*.rc`` (defaults)

.. note::

The registry key ``HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Mercurial``

is used when running 32-bit Python on 64-bit Windows.

.. container:: windows

On Windows 9x, ``%HOME%`` is replaced by ``%APPDATA%``.

.. container:: verbose.plan9

On Plan9, the following files are consulted:

- ``<repo>/.hg/hgrc`` (per-repository)

- ``$home/lib/hgrc`` (per-user)

- ``<install-root>/lib/mercurial/hgrc`` (per-installation)

- ``<install-root>/lib/mercurial/hgrc.d/*.rc`` (per-installation)

- ``/lib/mercurial/hgrc`` (per-system)

- ``/lib/mercurial/hgrc.d/*.rc`` (per-system)

- ``<internal>/default.d/*.rc`` (defaults)

Per-repository configuration options only apply in a

particular repository. This file is not version-controlled, and

will not get transferred during a "clone" operation. Options in

this file override options in all other configuration files.

.. container:: unix.plan9

On Plan 9 and Unix, most of this file will be ignored if it doesn't

belong to a trusted user or to a trusted group. See

:hg:`help config.trusted` for more details.

Per-user configuration file(s) are for the user running Mercurial. Options

in these files apply to all Mercurial commands executed by this user in any

directory. Options in these files override per-system and per-installation

options.

Per-installation configuration files are searched for in the

directory where Mercurial is installed. ``<install-root>`` is the

parent directory of the **hg** executable (or symlink) being run.

.. container:: unix.plan9

For example, if installed in ``/shared/tools/bin/hg``, Mercurial

will look in ``/shared/tools/etc/mercurial/hgrc``. Options in these

files apply to all Mercurial commands executed by any user in any

directory.

Per-installation configuration files are for the system on

which Mercurial is running. Options in these files apply to all

Mercurial commands executed by any user in any directory. Registry

keys contain PATH-like strings, every part of which must reference

a ``Mercurial.ini`` file or be a directory where ``*.rc`` files will

be read. Mercurial checks each of these locations in the specified

order until one or more configuration files are detected.

Per-system configuration files are for the system on which Mercurial

is running. Options in these files apply to all Mercurial commands

executed by any user in any directory. Options in these files

override per-installation options.

Mercurial comes with some default configuration. The default configuration

files are installed with Mercurial and will be overwritten on upgrades. Default

configuration files should never be edited by users or administrators but can

be overridden in other configuration files. So far the directory only contains

merge tool configuration but packagers can also put other default configuration

there.

Syntax

======

A configuration file consists of sections, led by a ``[section]`` header

and followed by ``name = value`` entries (sometimes called

``configuration keys``)::

[spam]

eggs=ham

green=

eggs

Each line contains one entry. If the lines that follow are indented,

they are treated as continuations of that entry. Leading whitespace is

removed from values. Empty lines are skipped. Lines beginning with

``#`` or ``;`` are ignored and may be used to provide comments.

Configuration keys can be set multiple times, in which case Mercurial

will use the value that was configured last. As an example::

[spam]

eggs=large

ham=serrano

eggs=small

This would set the configuration key named ``eggs`` to ``small``.

It is also possible to define a section multiple times. A section can

be redefined on the same and/or on different configuration files. For

example::

[foo]

eggs=large

ham=serrano

eggs=small

[bar]

eggs=ham

green=

eggs

[foo]

ham=prosciutto

eggs=medium

bread=toasted

This would set the ``eggs``, ``ham``, and ``bread`` configuration keys

of the ``foo`` section to ``medium``, ``prosciutto``, and ``toasted``,

respectively. As you can see there only thing that matters is the last

value that was set for each of the configuration keys.

If a configuration key is set multiple times in different

configuration files the final value will depend on the order in which

the different configuration files are read, with settings from earlier

paths overriding later ones as described on the ``Files`` section

above.

A line of the form ``%include file`` will include ``file`` into the

current configuration file. The inclusion is recursive, which means

that included files can include other files. Filenames are relative to

the configuration file in which the ``%include`` directive is found.

Environment variables and ``~user`` constructs are expanded in

``file``. This lets you do something like::

%include ~/.hgrc.d/$HOST.rc

to include a different configuration file on each computer you use.

A line with ``%unset name`` will remove ``name`` from the current

section, if it has been set previously.

The values are either free-form text strings, lists of text strings,

or Boolean values. Boolean values can be set to true using any of "1",

"yes", "true", or "on" and to false using "0", "no", "false", or "off"

(all case insensitive).

List values are separated by whitespace or comma, except when values are

placed in double quotation marks::

allow_read = "John Doe, PhD", brian, betty

Quotation marks can be escaped by prefixing them with a backslash. Only

quotation marks at the beginning of a word is counted as a quotation

(e.g., ``foo"bar baz`` is the list of ``foo"bar`` and ``baz``).

Sections

========

This section describes the different sections that may appear in a

Mercurial configuration file, the purpose of each section, its possible

keys, and their possible values.

``alias``

---------

Defines command aliases.

Aliases allow you to define your own commands in terms of other

commands (or aliases), optionally including arguments. Positional

arguments in the form of ``$1``, ``$2``, etc. in the alias definition

are expanded by Mercurial before execution. Positional arguments not

already used by ``$N`` in the definition are put at the end of the

command to be executed.

Alias definitions consist of lines of the form::

<alias> = <command> [<argument>]...

For example, this definition::

latest = log --limit 5

creates a new command ``latest`` that shows only the five most recent

changesets. You can define subsequent aliases using earlier ones::

stable5 = latest -b stable

.. note::

It is possible to create aliases with the same names as

existing commands, which will then override the original

definitions. This is almost always a bad idea!

An alias can start with an exclamation point (``!``) to make it a

shell alias. A shell alias is executed with the shell and will let you

run arbitrary commands. As an example, ::

echo = !echo $@

will let you do ``hg echo foo`` to have ``foo`` printed in your

terminal. A better example might be::

purge = !$HG status --no-status --unknown -0 re: | xargs -0 rm

which will make ``hg purge`` delete all unknown files in the

repository in the same manner as the purge extension.

Positional arguments like ``$1``, ``$2``, etc. in the alias definition

expand to the command arguments. Unmatched arguments are

removed. ``$0`` expands to the alias name and ``$@`` expands to all

arguments separated by a space. ``"$@"`` (with quotes) expands to all

arguments quoted individually and separated by a space. These expansions

happen before the command is passed to the shell.

Shell aliases are executed in an environment where ``$HG`` expands to

the path of the Mercurial that was used to execute the alias. This is

useful when you want to call further Mercurial commands in a shell

alias, as was done above for the purge alias. In addition,

``$HG_ARGS`` expands to the arguments given to Mercurial. In the ``hg

echo foo`` call above, ``$HG_ARGS`` would expand to ``echo foo``.

.. note::

Some global configuration options such as ``-R`` are

processed before shell aliases and will thus not be passed to

aliases.

``annotate``

------------

Settings used when displaying file annotations. All values are

Booleans and default to False. See :hg:`help config.diff` for

related options for the diff command.

``ignorews``

Ignore white space when comparing lines.

``ignorewsamount``

Ignore changes in the amount of white space.

``ignoreblanklines``

Ignore changes whose lines are all blank.

``auth``

--------

Authentication credentials for HTTP authentication. This section

allows you to store usernames and passwords for use when logging

*into* HTTP servers. See :hg:`help config.web` if

you want to configure *who* can login to your HTTP server.

Each line has the following format::

where ``<name>`` is used to group arguments into authentication

entries. Example::

foo.prefix = hg.intevation.de/mercurial

foo.username = foo

foo.password = bar

foo.schemes = http https

bar.prefix = secure.example.org

bar.key = path/to/file.key

bar.cert = path/to/file.cert

bar.schemes = https

Supported arguments:

``prefix``

Either ``*`` or a URI prefix with or without the scheme part.

The authentication entry with the longest matching prefix is used

(where ``*`` matches everything and counts as a match of length

1). If the prefix doesn't include a scheme, the match is performed

against the URI with its scheme stripped as well, and the schemes

argument, q.v., is then subsequently consulted.

``username``

Optional. Username to authenticate with. If not given, and the

remote site requires basic or digest authentication, the user will

be prompted for it. Environment variables are expanded in the

username letting you do ``foo.username = $USER``. If the URI

includes a username, only ``[auth]`` entries with a matching

username or without a username will be considered.

``password``

Optional. Password to authenticate with. If not given, and the

remote site requires basic or digest authentication, the user

will be prompted for it.

``key``

Optional. PEM encoded client certificate key file. Environment

variables are expanded in the filename.

``cert``

Optional. PEM encoded client certificate chain file. Environment

variables are expanded in the filename.

``schemes``

Optional. Space separated list of URI schemes to use this

authentication entry with. Only used if the prefix doesn't include

a scheme. Supported schemes are http and https. They will match

static-http and static-https respectively, as well.

(default: https)

If no suitable authentication entry is found, the user is prompted

for credentials as usual if required by the remote.

``committemplate``

------------------

``changeset``

String: configuration in this section is used as the template to

customize the text shown in the editor when committing.

In addition to pre-defined template keywords, commit log specific one

below can be used for customization:

``extramsg``

String: Extra message (typically 'Leave message empty to abort

commit.'). This may be changed by some commands or extensions.

For example, the template configuration below shows as same text as

one shown by default::

[committemplate]

changeset = {desc}\n\n

HG: Enter commit message. Lines beginning with 'HG:' are removed.

HG: {extramsg}

HG: --

HG: user: {author}\n{ifeq(p2rev, "-1", "",

"HG: branch merge\n")

}HG: branch '{branch}'\n{if(activebookmark,

"HG: bookmark '{activebookmark}'\n") }{subrepos %

"HG: subrepo {subrepo}\n" }{file_adds %

"HG: added {file}\n" }{file_mods %

"HG: changed {file}\n" }{file_dels %

"HG: removed {file}\n" }{if(files, "",

"HG: no files changed\n")}

.. note::

For some problematic encodings (see :hg:`help win32mbcs` for

detail), this customization should be configured carefully, to

avoid showing broken characters.

For example, if a multibyte character ending with backslash (0x5c) is

followed by the ASCII character 'n' in the customized template,

the sequence of backslash and 'n' is treated as line-feed unexpectedly

(and the multibyte character is broken, too).

Customized template is used for commands below (``--edit`` may be

required):

- :hg:`backout`

- :hg:`commit`

- :hg:`fetch` (for merge commit only)

- :hg:`graft`

- :hg:`histedit`

- :hg:`import`

- :hg:`qfold`, :hg:`qnew` and :hg:`qrefresh`

- :hg:`rebase`

- :hg:`shelve`

- :hg:`sign`

- :hg:`tag`

- :hg:`transplant`

Configuring items below instead of ``changeset`` allows showing

customized message only for specific actions, or showing different

messages for each action.

- ``changeset.backout`` for :hg:`backout`

- ``changeset.commit.amend.merge`` for :hg:`commit --amend` on merges

- ``changeset.commit.amend.normal`` for :hg:`commit --amend` on other

- ``changeset.commit.normal.merge`` for :hg:`commit` on merges

- ``changeset.commit.normal.normal`` for :hg:`commit` on other

- ``changeset.fetch`` for :hg:`fetch` (impling merge commit)

- ``changeset.gpg.sign`` for :hg:`sign`

- ``changeset.graft`` for :hg:`graft`

- ``changeset.histedit.edit`` for ``edit`` of :hg:`histedit`

- ``changeset.histedit.fold`` for ``fold`` of :hg:`histedit`

- ``changeset.histedit.mess`` for ``mess`` of :hg:`histedit`

- ``changeset.histedit.pick`` for ``pick`` of :hg:`histedit`

- ``changeset.import.bypass`` for :hg:`import --bypass`

- ``changeset.import.normal.merge`` for :hg:`import` on merges

- ``changeset.import.normal.normal`` for :hg:`import` on other

- ``changeset.mq.qnew`` for :hg:`qnew`

- ``changeset.mq.qfold`` for :hg:`qfold`

- ``changeset.mq.qrefresh`` for :hg:`qrefresh`

- ``changeset.rebase.collapse`` for :hg:`rebase --collapse`

- ``changeset.rebase.merge`` for :hg:`rebase` on merges

- ``changeset.rebase.normal`` for :hg:`rebase` on other

- ``changeset.shelve.shelve`` for :hg:`shelve`

- ``changeset.tag.add`` for :hg:`tag` without ``--remove``

- ``changeset.tag.remove`` for :hg:`tag --remove`

- ``changeset.transplant.merge`` for :hg:`transplant` on merges

- ``changeset.transplant.normal`` for :hg:`transplant` on other

These dot-separated lists of names are treated as hierarchical ones.

For example, ``changeset.tag.remove`` customizes the commit message

only for :hg:`tag --remove`, but ``changeset.tag`` customizes the

commit message for :hg:`tag` regardless of ``--remove`` option.

When the external editor is invoked for a commit, the corresponding

dot-separated list of names without the ``changeset.`` prefix

(e.g. ``commit.normal.normal``) is in the ``HGEDITFORM`` environment

variable.

In this section, items other than ``changeset`` can be referred from

others. For example, the configuration to list committed files up

below can be referred as ``{listupfiles}``::

[committemplate]

listupfiles = {file_adds %

"HG: added {file}\n" }{file_mods %

"HG: changed {file}\n" }{file_dels %

"HG: removed {file}\n" }{if(files, "",

"HG: no files changed\n")}

``decode/encode``

-----------------

Filters for transforming files on checkout/checkin. This would

typically be used for newline processing or other

localization/canonicalization of files.

Filters consist of a filter pattern followed by a filter command.

Filter patterns are globs by default, rooted at the repository root.

For example, to match any file ending in ``.txt`` in the root

directory only, use the pattern ``*.txt``. To match any file ending

in ``.c`` anywhere in the repository, use the pattern ``**.c``.

For each file only the first matching filter applies.

The filter command can start with a specifier, either ``pipe:`` or

``tempfile:``. If no specifier is given, ``pipe:`` is used by default.

A ``pipe:`` command must accept data on stdin and return the transformed

data on stdout.

Pipe example::

[encode]

# uncompress gzip files on checkin to improve delta compression

# note: not necessarily a good idea, just an example

*.gz = pipe: gunzip

[decode]

# recompress gzip files when writing them to the working dir (we

# can safely omit "pipe:", because it's the default)

*.gz = gzip

A ``tempfile:`` command is a template. The string ``INFILE`` is replaced

with the name of a temporary file that contains the data to be

filtered by the command. The string ``OUTFILE`` is replaced with the name

of an empty temporary file, where the filtered data must be written by

the command.

.. container:: windows

.. note::

The tempfile mechanism is recommended for Windows systems,

where the standard shell I/O redirection operators often have

strange effects and may corrupt the contents of your files.

This filter mechanism is used internally by the ``eol`` extension to

translate line ending characters between Windows (CRLF) and Unix (LF)

format. We suggest you use the ``eol`` extension for convenience.

``defaults``

------------

(defaults are deprecated. Don't use them. Use aliases instead.)

Use the ``[defaults]`` section to define command defaults, i.e. the

default options/arguments to pass to the specified commands.

The following example makes :hg:`log` run in verbose mode, and

:hg:`status` show only the modified files, by default::

[defaults]

log = -v

status = -m

The actual commands, instead of their aliases, must be used when

defining command defaults. The command defaults will also be applied

to the aliases of the commands defined.

``diff``

--------

Settings used when displaying diffs. Everything except for ``unified``

is a Boolean and defaults to False. See :hg:`help config.annotate`

for related options for the annotate command.

``git``

Use git extended diff format.

``nobinary``

Omit git binary patches.

``nodates``

Don't include dates in diff headers.

``noprefix``

Omit 'a/' and 'b/' prefixes from filenames. Ignored in plain mode.

``showfunc``

Show which function each change is in.

``ignorews``

Ignore white space when comparing lines.

``ignorewsamount``

Ignore changes in the amount of white space.

``ignoreblanklines``

Ignore changes whose lines are all blank.

``unified``

Number of lines of context to show.

``email``

---------

Settings for extensions that send email messages.

``from``

Optional. Email address to use in "From" header and SMTP envelope

of outgoing messages.

``to``

Optional. Comma-separated list of recipients' email addresses.

``cc``

Optional. Comma-separated list of carbon copy recipients'

email addresses.

``bcc``

Optional. Comma-separated list of blind carbon copy recipients'

email addresses.

``method``

Optional. Method to use to send email messages. If value is ``smtp``

(default), use SMTP (see the ``[smtp]`` section for configuration).

Otherwise, use as name of program to run that acts like sendmail

(takes ``-f`` option for sender, list of recipients on command line,

message on stdin). Normally, setting this to ``sendmail`` or

``/usr/sbin/sendmail`` is enough to use sendmail to send messages.

``charsets``

Optional. Comma-separated list of character sets considered

convenient for recipients. Addresses, headers, and parts not

containing patches of outgoing messages will be encoded in the

first character set to which conversion from local encoding

(``$HGENCODING``, ``ui.fallbackencoding``) succeeds. If correct

conversion fails, the text in question is sent as is.

(default: '')

Order of outgoing email character sets:

1. ``us-ascii``: always first, regardless of settings

2. ``email.charsets``: in order given by user

3. ``ui.fallbackencoding``: if not in email.charsets

4. ``$HGENCODING``: if not in email.charsets

5. ``utf-8``: always last, regardless of settings

Email example::

[email]

from = Joseph User <joe.user@example.com>

method = /usr/sbin/sendmail

# charsets for western Europeans

# us-ascii, utf-8 omitted, as they are tried first and last

charsets = iso-8859-1, iso-8859-15, windows-1252

``extensions``

--------------

Mercurial has an extension mechanism for adding new features. To

enable an extension, create an entry for it in this section.

If you know that the extension is already in Python's search path,

you can give the name of the module, followed by ``=``, with nothing

after the ``=``.

Otherwise, give a name that you choose, followed by ``=``, followed by

the path to the ``.py`` file (including the file name extension) that

defines the extension.

To explicitly disable an extension that is enabled in an hgrc of

broader scope, prepend its path with ``!``, as in ``foo = !/ext/path``

or ``foo = !`` when path is not supplied.

Example for ``~/.hgrc``::

[extensions]

# (the color extension will get loaded from Mercurial's path)

color =

# (this extension will get loaded from the file specified)

myfeature = ~/.hgext/myfeature.py

``format``

----------

``usegeneraldelta``

Enable or disable the "generaldelta" repository format which improves

repository compression by allowing "revlog" to store delta against arbitrary

revision instead of the previous stored one. This provides significant

improvement for repositories with branches.

Repositories with this on-disk format require Mercurial version 1.9.

Enabled by default.

``dotencode``

Enable or disable the "dotencode" repository format which enhances

the "fncache" repository format (which has to be enabled to use

dotencode) to avoid issues with filenames starting with ._ on

Mac OS X and spaces on Windows.

Repositories with this on-disk format require Mercurial version 1.7.

Enabled by default.

``usefncache``

Enable or disable the "fncache" repository format which enhances

the "store" repository format (which has to be enabled to use

fncache) to allow longer filenames and avoids using Windows

reserved names, e.g. "nul".

Repositories with this on-disk format require Mercurial version 1.1.

Enabled by default.

``usestore``

Enable or disable the "store" repository format which improves

compatibility with systems that fold case or otherwise mangle

filenames. Disabling this option will allow you to store longer filenames

in some situations at the expense of compatibility.

Repositories with this on-disk format require Mercurial version 0.9.4.

Enabled by default.

``graph``

---------

Web graph view configuration. This section let you change graph

elements display properties by branches, for instance to make the

``default`` branch stand out.

Each line has the following format::

where ``<branch>`` is the name of the branch being

customized. Example::

[graph]

# 2px width

default.width = 2

# red color

default.color = FF0000

Supported arguments:

``width``

Set branch edges width in pixels.

``color``

Set branch edges color in hexadecimal RGB notation.

``hooks``

---------

Commands or Python functions that get automatically executed by

various actions such as starting or finishing a commit. Multiple

hooks can be run for the same action by appending a suffix to the

action. Overriding a site-wide hook can be done by changing its

value or setting it to an empty string. Hooks can be prioritized

by adding a prefix of ``priority.`` to the hook name on a new line

and setting the priority. The default priority is 0.

Example ``.hg/hgrc``::

[hooks]

# update working directory after adding changesets

changegroup.update = hg update

# do not use the site-wide hook

incoming =

incoming.email = /my/email/hook

incoming.autobuild = /my/build/hook

# force autobuild hook to run before other incoming hooks

priority.incoming.autobuild = 1

Most hooks are run with environment variables set that give useful

additional information. For each hook below, the environment

variables it is passed are listed with names of the form ``$HG_foo``.

``changegroup``

Run after a changegroup has been added via push, pull or unbundle. ID of the

first new changeset is in ``$HG_NODE`` and last in ``$HG_NODE_LAST``. URL

from which changes came is in ``$HG_URL``.

``commit``

Run after a changeset has been created in the local repository. ID

of the newly created changeset is in ``$HG_NODE``. Parent changeset

IDs are in ``$HG_PARENT1`` and ``$HG_PARENT2``.

``incoming``

Run after a changeset has been pulled, pushed, or unbundled into

the local repository. The ID of the newly arrived changeset is in

``$HG_NODE``. URL that was source of changes came is in ``$HG_URL``.

``outgoing``

Run after sending changes from local repository to another. ID of

first changeset sent is in ``$HG_NODE``. Source of operation is in

``$HG_SOURCE``; Also see :hg:`help config.hooks.preoutgoing` hook.

``post-<command>``

Run after successful invocations of the associated command. The

contents of the command line are passed as ``$HG_ARGS`` and the result

code in ``$HG_RESULT``. Parsed command line arguments are passed as

``$HG_PATS`` and ``$HG_OPTS``. These contain string representations of

the python data internally passed to <command>. ``$HG_OPTS`` is a

dictionary of options (with unspecified options set to their defaults).

``$HG_PATS`` is a list of arguments. Hook failure is ignored.

``fail-<command>``

Run after a failed invocation of an associated command. The contents

of the command line are passed as ``$HG_ARGS``. Parsed command line

arguments are passed as ``$HG_PATS`` and ``$HG_OPTS``. These contain

string representations of the python data internally passed to

<command>. ``$HG_OPTS`` is a dictionary of options (with unspecified

options set to their defaults). ``$HG_PATS`` is a list of arguments.

Hook failure is ignored.

``pre-<command>``

Run before executing the associated command. The contents of the

command line are passed as ``$HG_ARGS``. Parsed command line arguments

are passed as ``$HG_PATS`` and ``$HG_OPTS``. These contain string

representations of the data internally passed to <command>. ``$HG_OPTS``

is a dictionary of options (with unspecified options set to their

defaults). ``$HG_PATS`` is a list of arguments. If the hook returns

failure, the command doesn't execute and Mercurial returns the failure

code.

``prechangegroup``

Run before a changegroup is added via push, pull or unbundle. Exit

status 0 allows the changegroup to proceed. Non-zero status will

cause the push, pull or unbundle to fail. URL from which changes

will come is in ``$HG_URL``.

``precommit``

Run before starting a local commit. Exit status 0 allows the

commit to proceed. Non-zero status will cause the commit to fail.

Parent changeset IDs are in ``$HG_PARENT1`` and ``$HG_PARENT2``.

``prelistkeys``

Run before listing pushkeys (like bookmarks) in the

repository. Non-zero status will cause failure. The key namespace is

in ``$HG_NAMESPACE``.

``preoutgoing``

Run before collecting changes to send from the local repository to

another. Non-zero status will cause failure. This lets you prevent

pull over HTTP or SSH. Also prevents against local pull, push

(outbound) or bundle commands, but not effective, since you can

just copy files instead then. Source of operation is in

``$HG_SOURCE``. If "serve", operation is happening on behalf of remote

SSH or HTTP repository. If "push", "pull" or "bundle", operation

is happening on behalf of repository on same system.

``prepushkey``

Run before a pushkey (like a bookmark) is added to the

repository. Non-zero status will cause the key to be rejected. The

key namespace is in ``$HG_NAMESPACE``, the key is in ``$HG_KEY``,

the old value (if any) is in ``$HG_OLD``, and the new value is in

``$HG_NEW``.

``pretag``

Run before creating a tag. Exit status 0 allows the tag to be

created. Non-zero status will cause the tag to fail. ID of

changeset to tag is in ``$HG_NODE``. Name of tag is in ``$HG_TAG``. Tag is

local if ``$HG_LOCAL=1``, in repository if ``$HG_LOCAL=0``.

``pretxnopen``

Run before any new repository transaction is open. The reason for the

transaction will be in ``$HG_TXNNAME`` and a unique identifier for the

transaction will be in ``HG_TXNID``. A non-zero status will prevent the

transaction from being opened.

``pretxnclose``

Run right before the transaction is actually finalized. Any repository change

will be visible to the hook program. This lets you validate the transaction

content or change it. Exit status 0 allows the commit to proceed. Non-zero

status will cause the transaction to be rolled back. The reason for the

transaction opening will be in ``$HG_TXNNAME`` and a unique identifier for

the transaction will be in ``HG_TXNID``. The rest of the available data will

vary according the transaction type. New changesets will add ``$HG_NODE`` (id

of the first added changeset), ``$HG_NODE_LAST`` (id of the last added

changeset), ``$HG_URL`` and ``$HG_SOURCE`` variables, bookmarks and phases

changes will set ``HG_BOOKMARK_MOVED`` and ``HG_PHASES_MOVED`` to ``1``, etc.

``txnclose``

Run after any repository transaction has been committed. At this

point, the transaction can no longer be rolled back. The hook will run

after the lock is released. See :hg:`help config.hooks.pretxnclose` docs for

details about available variables.

``txnabort``

Run when a transaction is aborted. See :hg:`help config.hooks.pretxnclose`

docs for details about available variables.

``pretxnchangegroup``

Run after a changegroup has been added via push, pull or unbundle, but before

the transaction has been committed. Changegroup is visible to hook program.

This lets you validate incoming changes before accepting them. Passed the ID

of the first new changeset in ``$HG_NODE`` and last in ``$HG_NODE_LAST``.

Exit status 0 allows the transaction to commit. Non-zero status will cause

the transaction to be rolled back and the push, pull or unbundle will fail.

URL that was source of changes is in ``$HG_URL``.

``pretxncommit``

Run after a changeset has been created but the transaction not yet

committed. Changeset is visible to hook program. This lets you

validate commit message and changes. Exit status 0 allows the

commit to proceed. Non-zero status will cause the transaction to

be rolled back. ID of changeset is in ``$HG_NODE``. Parent changeset

IDs are in ``$HG_PARENT1`` and ``$HG_PARENT2``.

``preupdate``

Run before updating the working directory. Exit status 0 allows

the update to proceed. Non-zero status will prevent the update.

Changeset ID of first new parent is in ``$HG_PARENT1``. If merge, ID

of second new parent is in ``$HG_PARENT2``.

``listkeys``

Run after listing pushkeys (like bookmarks) in the repository. The

key namespace is in ``$HG_NAMESPACE``. ``$HG_VALUES`` is a

dictionary containing the keys and values.

``pushkey``

Run after a pushkey (like a bookmark) is added to the

repository. The key namespace is in ``$HG_NAMESPACE``, the key is in

``$HG_KEY``, the old value (if any) is in ``$HG_OLD``, and the new

value is in ``$HG_NEW``.

``tag``

Run after a tag is created. ID of tagged changeset is in ``$HG_NODE``.

Name of tag is in ``$HG_TAG``. Tag is local if ``$HG_LOCAL=1``, in

repository if ``$HG_LOCAL=0``.

``update``

Run after updating the working directory. Changeset ID of first

new parent is in ``$HG_PARENT1``. If merge, ID of second new parent is

in ``$HG_PARENT2``. If the update succeeded, ``$HG_ERROR=0``. If the

update failed (e.g. because conflicts not resolved), ``$HG_ERROR=1``.

.. note::

It is generally better to use standard hooks rather than the

generic pre- and post- command hooks as they are guaranteed to be

called in the appropriate contexts for influencing transactions.

Also, hooks like "commit" will be called in all contexts that

generate a commit (e.g. tag) and not just the commit command.

.. note::

Environment variables with empty values may not be passed to

hooks on platforms such as Windows. As an example, ``$HG_PARENT2``

will have an empty value under Unix-like platforms for non-merge

changesets, while it will not be available at all under Windows.

The syntax for Python hooks is as follows::

hookname = python:modulename.submodule.callable

hookname = python:/path/to/python/module.py:callable

Python hooks are run within the Mercurial process. Each hook is

called with at least three keyword arguments: a ui object (keyword

``ui``), a repository object (keyword ``repo``), and a ``hooktype``

keyword that tells what kind of hook is used. Arguments listed as

environment variables above are passed as keyword arguments, with no

``HG_`` prefix, and names in lower case.

If a Python hook returns a "true" value or raises an exception, this

is treated as a failure.

``hostfingerprints``

--------------------

(Deprecated. Use ``[hostsecurity]``'s ``fingerprints`` options instead.)

Fingerprints of the certificates of known HTTPS servers.

A HTTPS connection to a server with a fingerprint configured here will

only succeed if the servers certificate matches the fingerprint.

This is very similar to how ssh known hosts works.

The fingerprint is the SHA-1 hash value of the DER encoded certificate.

Multiple values can be specified (separated by spaces or commas). This can

be used to define both old and new fingerprints while a host transitions

to a new certificate.

The CA chain and web.cacerts is not used for servers with a fingerprint.

For example::

[hostfingerprints]

hg.intevation.de = fc:e2:8d:d9:51:cd:cb:c1:4d:18:6b:b7:44:8d:49:72:57:e6:cd:33

hg.intevation.org = fc:e2:8d:d9:51:cd:cb:c1:4d:18:6b:b7:44:8d:49:72:57:e6:cd:33

``hostsecurity``

----------------

Used to specify per-host security settings.

Options in this section have the form ``hostname``:``setting``. This allows

multiple settings to be defined on a per-host basis.

The following per-host settings can be defined.

``fingerprints``

A list of hashes of the DER encoded peer/remote certificate. Values have

the form ``algorithm``:``fingerprint``. e.g.

``sha256:c3ab8ff13720e8ad9047dd39466b3c8974e592c2fa383d4a3960714caef0c4f2``.

The following algorithms/prefixes are supported: ``sha1``, ``sha256``,

``sha512``.

Use of ``sha256`` or ``sha512`` is preferred.

If a fingerprint is specified, the CA chain is not validated for this

host and Mercurial will require the remote certificate to match one

of the fingerprints specified. This means if the server updates its

certificate, Mercurial will abort until a new fingerprint is defined.

This can provide stronger security than traditional CA-based validation

at the expense of convenience.

This option takes precedence over ``verifycertsfile``.

``verifycertsfile``

Path to file a containing a list of PEM encoded certificates used to

verify the server certificate. Environment variables and ``~user``

constructs are expanded in the filename.

The server certificate or the certificate's certificate authority (CA)

must match a certificate from this file or certificate verification

will fail and connections to the server will be refused.

If defined, only certificates provided by this file will be used:

``web.cacerts`` and any system/default certificates will not be

used.

This option has no effect if the per-host ``fingerprints`` option

is set.

The format of the file is as follows:

-----BEGIN CERTIFICATE-----

... (certificate in base64 PEM encoding) ...

-----END CERTIFICATE-----

-----BEGIN CERTIFICATE-----

... (certificate in base64 PEM encoding) ...

-----END CERTIFICATE-----

For example::

[hostsecurity]

hg.example.com:fingerprints = sha256:c3ab8ff13720e8ad9047dd39466b3c8974e592c2fa383d4a3960714caef0c4f2

hg2.example.com:fingerprints = sha1:914f1aff87249c09b6859b88b1906d30756491ca, sha1:fc:e2:8d:d9:51:cd:cb:c1:4d:18:6b:b7:44:8d:49:72:57:e6:cd:33

foo.example.com:verifycertsfile = /etc/ssl/trusted-ca-certs.pem

``http_proxy``

--------------

Used to access web-based Mercurial repositories through a HTTP

proxy.

``host``

Host name and (optional) port of the proxy server, for example

"myproxy:8000".

``no``

Optional. Comma-separated list of host names that should bypass

the proxy.

``passwd``

Optional. Password to authenticate with at the proxy server.

``user``

Optional. User name to authenticate with at the proxy server.

``always``

Optional. Always use the proxy, even for localhost and any entries

in ``http_proxy.no``. (default: False)

``merge``

---------

This section specifies behavior during merges and updates.

``checkignored``

Controls behavior when an ignored file on disk has the same name as a tracked

file in the changeset being merged or updated to, and has different

contents. Options are ``abort``, ``warn`` and ``ignore``. With ``abort``,

abort on such files. With ``warn``, warn on such files and back them up as

``.orig``. With ``ignore``, don't print a warning and back them up as

``.orig``. (default: ``abort``)

``checkunknown``

Controls behavior when an unknown file that isn't ignored has the same name

as a tracked file in the changeset being merged or updated to, and has

different contents. Similar to ``merge.checkignored``, except for files that

are not ignored. (default: ``abort``)

``merge-patterns``

------------------

This section specifies merge tools to associate with particular file

patterns. Tools matched here will take precedence over the default

merge tool. Patterns are globs by default, rooted at the repository

root.

Example::

[merge-patterns]

**.c = kdiff3

**.jpg = myimgmerge

``merge-tools``

---------------

This section configures external merge tools to use for file-level

merges. This section has likely been preconfigured at install time.

Use :hg:`config merge-tools` to check the existing configuration.

Also see :hg:`help merge-tools` for more details.

Example ``~/.hgrc``::

[merge-tools]

# Override stock tool location

kdiff3.executable = ~/bin/kdiff3

# Specify command line

kdiff3.args = $base $local $other -o $output

# Give higher priority

kdiff3.priority = 1

# Changing the priority of preconfigured tool

meld.priority = 0

# Disable a preconfigured tool

vimdiff.disabled = yes

# Define new tool

myHtmlTool.args = -m $local $other $base $output

myHtmlTool.regkey = Software\FooSoftware\HtmlMerge

myHtmlTool.priority = 1

Supported arguments:

``priority``

The priority in which to evaluate this tool.

(default: 0)

``executable``

Either just the name of the executable or its pathname.

.. container:: windows

On Windows, the path can use environment variables with ${ProgramFiles}

syntax.

(default: the tool name)

``args``

The arguments to pass to the tool executable. You can refer to the

files being merged as well as the output file through these

variables: ``$base``, ``$local``, ``$other``, ``$output``. The meaning

of ``$local`` and ``$other`` can vary depending on which action is being

performed. During and update or merge, ``$local`` represents the original

state of the file, while ``$other`` represents the commit you are updating

to or the commit you are merging with. During a rebase ``$local``

represents the destination of the rebase, and ``$other`` represents the

commit being rebased.

(default: ``$local $base $other``)

``premerge``

Attempt to run internal non-interactive 3-way merge tool before

launching external tool. Options are ``true``, ``false``, ``keep`` or

``keep-merge3``. The ``keep`` option will leave markers in the file if the

premerge fails. The ``keep-merge3`` will do the same but include information

about the base of the merge in the marker (see internal :merge3 in

:hg:`help merge-tools`).

(default: True)

``binary``

This tool can merge binary files. (default: False, unless tool

was selected by file pattern match)

``symlink``

This tool can merge symlinks. (default: False)

``check``

A list of merge success-checking options:

``changed``

Ask whether merge was successful when the merged file shows no changes.

``conflicts``

Check whether there are conflicts even though the tool reported success.

``prompt``

Always prompt for merge success, regardless of success reported by tool.

``fixeol``

Attempt to fix up EOL changes caused by the merge tool.

(default: False)

``gui``

This tool requires a graphical interface to run. (default: False)

.. container:: windows

``regkey``

Windows registry key which describes install location of this

tool. Mercurial will search for this key first under

``HKEY_CURRENT_USER`` and then under ``HKEY_LOCAL_MACHINE``.

(default: None)

``regkeyalt``

An alternate Windows registry key to try if the first key is not

found. The alternate key uses the same ``regname`` and ``regappend``

semantics of the primary key. The most common use for this key

is to search for 32bit applications on 64bit operating systems.

(default: None)

``regname``

Name of value to read from specified registry key.

(default: the unnamed (default) value)

``regappend``

String to append to the value read from the registry, typically

the executable name of the tool.

(default: None)

``patch``

---------

Settings used when applying patches, for instance through the 'import'

command or with Mercurial Queues extension.

``eol``

When set to 'strict' patch content and patched files end of lines

are preserved. When set to ``lf`` or ``crlf``, both files end of

lines are ignored when patching and the result line endings are

normalized to either LF (Unix) or CRLF (Windows). When set to

``auto``, end of lines are again ignored while patching but line

endings in patched files are normalized to their original setting

on a per-file basis. If target file does not exist or has no end

of line, patch line endings are preserved.

(default: strict)

``fuzz``

The number of lines of 'fuzz' to allow when applying patches. This

controls how much context the patcher is allowed to ignore when

trying to apply a patch.

(default: 2)

``paths``

---------

Assigns symbolic names and behavior to repositories.

Options are symbolic names defining the URL or directory that is the

location of the repository. Example::

[paths]

my_server = https://example.com/my_repo

local_path = /home/me/repo

These symbolic names can be used from the command line. To pull

from ``my_server``: :hg:`pull my_server`. To push to ``local_path``:

:hg:`push local_path`.

Options containing colons (``:``) denote sub-options that can influence

behavior for that specific path. Example::

[paths]

my_server = https://example.com/my_path

my_server:pushurl = ssh://example.com/my_path

The following sub-options can be defined:

``pushurl``

The URL to use for push operations. If not defined, the location

defined by the path's main entry is used.

``pushrev``

A revset defining which revisions to push by default.

When :hg:`push` is executed without a ``-r`` argument, the revset

defined by this sub-option is evaluated to determine what to push.

For example, a value of ``.`` will push the working directory's

revision by default.

Revsets specifying bookmarks will not result in the bookmark being

pushed.

The following special named paths exist:

``default``

The URL or directory to use when no source or remote is specified.

:hg:`clone` will automatically define this path to the location the

repository was cloned from.

``default-push``

(deprecated) The URL or directory for the default :hg:`push` location.

``default:pushurl`` should be used instead.

``phases``

----------

Specifies default handling of phases. See :hg:`help phases` for more

information about working with phases.

``publish``

Controls draft phase behavior when working as a server. When true,

pushed changesets are set to public in both client and server and

pulled or cloned changesets are set to public in the client.

(default: True)

``new-commit``

Phase of newly-created commits.

(default: draft)

``checksubrepos``

Check the phase of the current revision of each subrepository. Allowed

values are "ignore", "follow" and "abort". For settings other than

"ignore", the phase of the current revision of each subrepository is

checked before committing the parent repository. If any of those phases is

greater than the phase of the parent repository (e.g. if a subrepo is in a

"secret" phase while the parent repo is in "draft" phase), the commit is

either aborted (if checksubrepos is set to "abort") or the higher phase is

used for the parent repository commit (if set to "follow").

(default: follow)

``profiling``

-------------

Specifies profiling type, format, and file output. Two profilers are

supported: an instrumenting profiler (named ``ls``), and a sampling

profiler (named ``stat``).

In this section description, 'profiling data' stands for the raw data

collected during profiling, while 'profiling report' stands for a

statistical text report generated from the profiling data. The

profiling is done using lsprof.

``type``

The type of profiler to use.

(default: ls)

``ls``

Use Python's built-in instrumenting profiler. This profiler

works on all platforms, but each line number it reports is the

first line of a function. This restriction makes it difficult to

identify the expensive parts of a non-trivial function.

``stat``

Use a third-party statistical profiler, statprof. This profiler

currently runs only on Unix systems, and is most useful for

profiling commands that run for longer than about 0.1 seconds.

``format``

Profiling format. Specific to the ``ls`` instrumenting profiler.

(default: text)

``text``

Generate a profiling report. When saving to a file, it should be

noted that only the report is saved, and the profiling data is

not kept.

``kcachegrind``

Format profiling data for kcachegrind use: when saving to a

file, the generated file can directly be loaded into

kcachegrind.

``frequency``

Sampling frequency. Specific to the ``stat`` sampling profiler.

(default: 1000)

``output``

File path where profiling data or report should be saved. If the

file exists, it is replaced. (default: None, data is printed on

stderr)

``sort``

Sort field. Specific to the ``ls`` instrumenting profiler.

One of ``callcount``, ``reccallcount``, ``totaltime`` and

``inlinetime``.

(default: inlinetime)

``limit``

Number of lines to show. Specific to the ``ls`` instrumenting profiler.

(default: 30)

``nested``

Show at most this number of lines of drill-down info after each main entry.

This can help explain the difference between Total and Inline.

Specific to the ``ls`` instrumenting profiler.

(default: 5)

``progress``

------------

Mercurial commands can draw progress bars that are as informative as

possible. Some progress bars only offer indeterminate information, while others

have a definite end point.

``delay``

Number of seconds (float) before showing the progress bar. (default: 3)

``changedelay``

Minimum delay before showing a new topic. When set to less than 3 * refresh,

that value will be used instead. (default: 1)

``refresh``

Time in seconds between refreshes of the progress bar. (default: 0.1)

``format``

Format of the progress bar.

Valid entries for the format field are ``topic``, ``bar``, ``number``,

``unit``, ``estimate``, ``speed``, and ``item``. ``item`` defaults to the

last 20 characters of the item, but this can be changed by adding either

``-<num>`` which would take the last num characters, or ``+<num>`` for the

first num characters.

(default: topic bar number estimate)

``width``

If set, the maximum width of the progress information (that is, min(width,

term width) will be used).

``clear-complete``

Clear the progress bar after it's done. (default: True)

``disable``

If true, don't show a progress bar.

``assume-tty``

If true, ALWAYS show a progress bar, unless disable is given.

``rebase``

----------

``allowdivergence``

Default to False, when True allow creating divergence when performing

rebase of obsolete changesets.

``revsetalias``

---------------

Alias definitions for revsets. See :hg:`help revsets` for details.

``server``

----------

Controls generic server settings.

``uncompressed``

Whether to allow clients to clone a repository using the

uncompressed streaming protocol. This transfers about 40% more

data than a regular clone, but uses less memory and CPU on both

server and client. Over a LAN (100 Mbps or better) or a very fast

WAN, an uncompressed streaming clone is a lot faster (~10x) than a

regular clone. Over most WAN connections (anything slower than

about 6 Mbps), uncompressed streaming is slower, because of the

extra data transfer overhead. This mode will also temporarily hold

the write lock while determining what data to transfer.

(default: True)

``preferuncompressed``

When set, clients will try to use the uncompressed streaming

protocol. (default: False)

``validate``

Whether to validate the completeness of pushed changesets by

checking that all new file revisions specified in manifests are

present. (default: False)

``maxhttpheaderlen``

Instruct HTTP clients not to send request headers longer than this

many bytes. (default: 1024)

``bundle1``

Whether to allow clients to push and pull using the legacy bundle1

exchange format. (default: True)

``bundle1gd``

Like ``bundle1`` but only used if the repository is using the

*generaldelta* storage format. (default: True)

``bundle1.push``

Whether to allow clients to push using the legacy bundle1 exchange

format. (default: True)

``bundle1gd.push``

Like ``bundle1.push`` but only used if the repository is using the

*generaldelta* storage format. (default: True)

``bundle1.pull``

Whether to allow clients to pull using the legacy bundle1 exchange

format. (default: True)

``bundle1gd.pull``

Like ``bundle1.pull`` but only used if the repository is using the

*generaldelta* storage format. (default: True)

Large repositories using the *generaldelta* storage format should

consider setting this option because converting *generaldelta*

repositories to the exchange format required by the bundle1 data

format can consume a lot of CPU.

``smtp``

--------

Configuration for extensions that need to send email messages.

``host``

Host name of mail server, e.g. "mail.example.com".

``port``

Optional. Port to connect to on mail server. (default: 465 if

``tls`` is smtps; 25 otherwise)

``tls``

Optional. Method to enable TLS when connecting to mail server: starttls,

smtps or none. (default: none)

``username``

Optional. User name for authenticating with the SMTP server.

(default: None)

``password``

Optional. Password for authenticating with the SMTP server. If not

specified, interactive sessions will prompt the user for a

password; non-interactive sessions will fail. (default: None)

``local_hostname``

Optional. The hostname that the sender can use to identify

itself to the MTA.

``subpaths``

------------

Subrepository source URLs can go stale if a remote server changes name

or becomes temporarily unavailable. This section lets you define

rewrite rules of the form::

where ``pattern`` is a regular expression matching a subrepository

source URL and ``replacement`` is the replacement string used to

rewrite it. Groups can be matched in ``pattern`` and referenced in

``replacements``. For instance::

http://server/(.*)-hg/ = http://hg.server/\1/

rewrites ``http://server/foo-hg/`` into ``http://hg.server/foo/``.

Relative subrepository paths are first made absolute, and the

rewrite rules are then applied on the full (absolute) path. The rules

are applied in definition order.

``templatealias``

-----------------

Alias definitions for templates. See :hg:`help templates` for details.

``trusted``

-----------

Mercurial will not use the settings in the

``.hg/hgrc`` file from a repository if it doesn't belong to a trusted

user or to a trusted group, as various hgrc features allow arbitrary

commands to be run. This issue is often encountered when configuring

hooks or extensions for shared repositories or servers. However,

the web interface will use some safe settings from the ``[web]``

section.

This section specifies what users and groups are trusted. The

current user is always trusted. To trust everybody, list a user or a

group with name ``*``. These settings must be placed in an

*already-trusted file* to take effect, such as ``$HOME/.hgrc`` of the

user or service running Mercurial.

``users``

Comma-separated list of trusted users.

``groups``

Comma-separated list of trusted groups.

``ui``

------

User interface controls.

``archivemeta``

Whether to include the .hg_archival.txt file containing meta data

(hashes for the repository base and for tip) in archives created

by the :hg:`archive` command or downloaded via hgweb.

(default: True)

``askusername``

Whether to prompt for a username when committing. If True, and

neither ``$HGUSER`` nor ``$EMAIL`` has been specified, then the user will

be prompted to enter a username. If no username is entered, the

default ``USER@HOST`` is used instead.

(default: False)

``clonebundles``

Whether the "clone bundles" feature is enabled.

When enabled, :hg:`clone` may download and apply a server-advertised

bundle file from a URL instead of using the normal exchange mechanism.

This can likely result in faster and more reliable clones.

(default: True)

``clonebundlefallback``

Whether failure to apply an advertised "clone bundle" from a server

should result in fallback to a regular clone.

This is disabled by default because servers advertising "clone

bundles" often do so to reduce server load. If advertised bundles

start mass failing and clients automatically fall back to a regular

clone, this would add significant and unexpected load to the server

since the server is expecting clone operations to be offloaded to

pre-generated bundles. Failing fast (the default behavior) ensures

clients don't overwhelm the server when "clone bundle" application

fails.

(default: False)

``clonebundleprefers``

Defines preferences for which "clone bundles" to use.

Servers advertising "clone bundles" may advertise multiple available

bundles. Each bundle may have different attributes, such as the bundle

type and compression format. This option is used to prefer a particular

bundle over another.

The following keys are defined by Mercurial:

BUNDLESPEC

A bundle type specifier. These are strings passed to :hg:`bundle -t`.

e.g. ``gzip-v2`` or ``bzip2-v1``.

COMPRESSION

The compression format of the bundle. e.g. ``gzip`` and ``bzip2``.

Server operators may define custom keys.

Example values: ``COMPRESSION=bzip2``,

``BUNDLESPEC=gzip-v2, COMPRESSION=gzip``.

By default, the first bundle advertised by the server is used.

``commitsubrepos``

Whether to commit modified subrepositories when committing the

parent repository. If False and one subrepository has uncommitted

changes, abort the commit.

(default: False)

``debug``

Print debugging information. (default: False)

``editor``

The editor to use during a commit. (default: ``$EDITOR`` or ``vi``)

``fallbackencoding``

Encoding to try if it's not possible to decode the changelog using

UTF-8. (default: ISO-8859-1)

``graphnodetemplate``

The template used to print changeset nodes in an ASCII revision graph.

(default: ``{graphnode}``)

``ignore``

A file to read per-user ignore patterns from. This file should be

in the same format as a repository-wide .hgignore file. Filenames

are relative to the repository root. This option supports hook syntax,

so if you want to specify multiple ignore files, you can do so by

setting something like ``ignore.other = ~/.hgignore2``. For details

of the ignore file format, see the ``hgignore(5)`` man page.

``interactive``

Allow to prompt the user. (default: True)

``interface``

Select the default interface for interactive features (default: text).

Possible values are 'text' and 'curses'.

``interface.chunkselector``

Select the interface for change recording (e.g. :hg:`commit` -i).

Possible values are 'text' and 'curses'.

This config overrides the interface specified by ui.interface.

``logtemplate``

Template string for commands that print changesets.

``merge``

The conflict resolution program to use during a manual merge.

For more information on merge tools see :hg:`help merge-tools`.

For configuring merge tools see the ``[merge-tools]`` section.

``mergemarkers``

Sets the merge conflict marker label styling. The ``detailed``

style uses the ``mergemarkertemplate`` setting to style the labels.

The ``basic`` style just uses 'local' and 'other' as the marker label.

One of ``basic`` or ``detailed``.

(default: ``basic``)

``mergemarkertemplate``

The template used to print the commit description next to each conflict

marker during merge conflicts. See :hg:`help templates` for the template

format.

Defaults to showing the hash, tags, branches, bookmarks, author, and

the first line of the commit description.

If you use non-ASCII characters in names for tags, branches, bookmarks,

authors, and/or commit descriptions, you must pay attention to encodings of

managed files. At template expansion, non-ASCII characters use the encoding

specified by the ``--encoding`` global option, ``HGENCODING`` or other

environment variables that govern your locale. If the encoding of the merge

markers is different from the encoding of the merged files,

serious problems may occur.

``origbackuppath``

The path to a directory used to store generated .orig files. If the path is

not a directory, one will be created.

``patch``

An optional external tool that ``hg import`` and some extensions

will use for applying patches. By default Mercurial uses an

internal patch utility. The external tool must work as the common

Unix ``patch`` program. In particular, it must accept a ``-p``

argument to strip patch headers, a ``-d`` argument to specify the

current directory, a file name to patch, and a patch file to take

from stdin.

It is possible to specify a patch tool together with extra

arguments. For example, setting this option to ``patch --merge``

will use the ``patch`` program with its 2-way merge option.

``portablefilenames``

Check for portable filenames. Can be ``warn``, ``ignore`` or ``abort``.

(default: ``warn``)

``warn``

Print a warning message on POSIX platforms, if a file with a non-portable

filename is added (e.g. a file with a name that can't be created on

Windows because it contains reserved parts like ``AUX``, reserved

characters like ``:``, or would cause a case collision with an existing

file).

``ignore``

Don't print a warning.

``abort``

The command is aborted.

``true``

Alias for ``warn``.

``false``

Alias for ``ignore``.

.. container:: windows

On Windows, this configuration option is ignored and the command aborted.

``quiet``

Reduce the amount of output printed.

(default: False)

``remotecmd``

Remote command to use for clone/push/pull operations.

(default: ``hg``)

``report_untrusted``

Warn if a ``.hg/hgrc`` file is ignored due to not being owned by a

trusted user or group.

(default: True)

``slash``

Display paths using a slash (``/``) as the path separator. This

only makes a difference on systems where the default path

separator is not the slash character (e.g. Windows uses the

backslash character (``\``)).

(default: False)

``statuscopies``

Display copies in the status command.

``ssh``

Command to use for SSH connections. (default: ``ssh``)

``strict``

Require exact command names, instead of allowing unambiguous

abbreviations. (default: False)

``style``

Name of style to use for command output.

``supportcontact``

A URL where users should report a Mercurial traceback. Use this if you are a

large organisation with its own Mercurial deployment process and crash

reports should be addressed to your internal support.

``textwidth``

Maximum width of help text. A longer line generated by ``hg help`` or

``hg subcommand --help`` will be broken after white space to get this

width or the terminal width, whichever comes first.

A non-positive value will disable this and the terminal width will be

used. (default: 78)

``timeout``

The timeout used when a lock is held (in seconds), a negative value

means no timeout. (default: 600)

``traceback``

Mercurial always prints a traceback when an unknown exception

occurs. Setting this to True will make Mercurial print a traceback

on all exceptions, even those recognized by Mercurial (such as

IOError or MemoryError). (default: False)

``username``

The committer of a changeset created when running "commit".

Typically a person's name and email address, e.g. ``Fred Widget

<fred@example.com>``. Environment variables in the

username are expanded.

(default: ``$EMAIL`` or ``username@hostname``. If the username in

hgrc is empty, e.g. if the system admin set ``username =`` in the

system hgrc, it has to be specified manually or in a different

hgrc file)

``verbose``

Increase the amount of output printed. (default: False)

``web``

-------

Web interface configuration. The settings in this section apply to

both the builtin webserver (started by :hg:`serve`) and the script you

run through a webserver (``hgweb.cgi`` and the derivatives for FastCGI

and WSGI).

The Mercurial webserver does no authentication (it does not prompt for

usernames and passwords to validate *who* users are), but it does do

authorization (it grants or denies access for *authenticated users*

based on settings in this section). You must either configure your

webserver to do authentication for you, or disable the authorization

checks.

For a quick setup in a trusted environment, e.g., a private LAN, where

you want it to accept pushes from anybody, you can use the following

command line::

$ hg --config web.allow_push=* --config web.push_ssl=False serve

Note that this will allow anybody to push anything to the server and

that this should not be used for public servers.

The full set of options is:

``accesslog``

Where to output the access log. (default: stdout)

``address``

Interface address to bind to. (default: all)

``allow_archive``

List of archive format (bz2, gz, zip) allowed for downloading.

(default: empty)

``allowbz2``

(DEPRECATED) Whether to allow .tar.bz2 downloading of repository

revisions.

(default: False)

``allowgz``

(DEPRECATED) Whether to allow .tar.gz downloading of repository

revisions.

(default: False)

``allowpull``

Whether to allow pulling from the repository. (default: True)

``allow_push``

Whether to allow pushing to the repository. If empty or not set,

pushing is not allowed. If the special value ``*``, any remote

user can push, including unauthenticated users. Otherwise, the

remote user must have been authenticated, and the authenticated

user name must be present in this list. The contents of the

allow_push list are examined after the deny_push list.

``allow_read``

If the user has not already been denied repository access due to

the contents of deny_read, this list determines whether to grant

repository access to the user. If this list is not empty, and the

user is unauthenticated or not present in the list, then access is

denied for the user. If the list is empty or not set, then access

is permitted to all users by default. Setting allow_read to the

special value ``*`` is equivalent to it not being set (i.e. access

is permitted to all users). The contents of the allow_read list are

examined after the deny_read list.

``allowzip``

(DEPRECATED) Whether to allow .zip downloading of repository

revisions. This feature creates temporary files.

(default: False)

``archivesubrepos``

Whether to recurse into subrepositories when archiving.

(default: False)

``baseurl``

Base URL to use when publishing URLs in other locations, so

third-party tools like email notification hooks can construct

URLs. Example: ``http://hgserver/repos/``.

``cacerts``

Path to file containing a list of PEM encoded certificate

authority certificates. Environment variables and ``~user``

constructs are expanded in the filename. If specified on the

client, then it will verify the identity of remote HTTPS servers

with these certificates.

To disable SSL verification temporarily, specify ``--insecure`` from

command line.

You can use OpenSSL's CA certificate file if your platform has

one. On most Linux systems this will be

``/etc/ssl/certs/ca-certificates.crt``. Otherwise you will have to

generate this file manually. The form must be as follows::

-----BEGIN CERTIFICATE-----

... (certificate in base64 PEM encoding) ...

-----END CERTIFICATE-----

-----BEGIN CERTIFICATE-----

... (certificate in base64 PEM encoding) ...

-----END CERTIFICATE-----

``cache``

Whether to support caching in hgweb. (default: True)

``certificate``

Certificate to use when running :hg:`serve`.

``collapse``

With ``descend`` enabled, repositories in subdirectories are shown at

a single level alongside repositories in the current path. With

``collapse`` also enabled, repositories residing at a deeper level than

the current path are grouped behind navigable directory entries that

lead to the locations of these repositories. In effect, this setting

collapses each collection of repositories found within a subdirectory

into a single entry for that subdirectory. (default: False)

``comparisoncontext``

Number of lines of context to show in side-by-side file comparison. If

negative or the value ``full``, whole files are shown. (default: 5)

This setting can be overridden by a ``context`` request parameter to the

``comparison`` command, taking the same values.

``contact``

Name or email address of the person in charge of the repository.

(default: ui.username or ``$EMAIL`` or "unknown" if unset or empty)

``deny_push``

Whether to deny pushing to the repository. If empty or not set,

push is not denied. If the special value ``*``, all remote users are

denied push. Otherwise, unauthenticated users are all denied, and

any authenticated user name present in this list is also denied. The

contents of the deny_push list are examined before the allow_push list.

``deny_read``

Whether to deny reading/viewing of the repository. If this list is

not empty, unauthenticated users are all denied, and any

authenticated user name present in this list is also denied access to

the repository. If set to the special value ``*``, all remote users

are denied access (rarely needed ;). If deny_read is empty or not set,

the determination of repository access depends on the presence and

content of the allow_read list (see description). If both

deny_read and allow_read are empty or not set, then access is

permitted to all users by default. If the repository is being

served via hgwebdir, denied users will not be able to see it in

the list of repositories. The contents of the deny_read list have

priority over (are examined before) the contents of the allow_read

list.

``descend``

hgwebdir indexes will not descend into subdirectories. Only repositories

directly in the current path will be shown (other repositories are still

available from the index corresponding to their containing path).

``description``

Textual description of the repository's purpose or contents.

(default: "unknown")

``encoding``

Character encoding name. (default: the current locale charset)

Example: "UTF-8".

``errorlog``

Where to output the error log. (default: stderr)

``guessmime``

Control MIME types for raw download of file content.

Set to True to let hgweb guess the content type from the file

extension. This will serve HTML files as ``text/html`` and might

allow cross-site scripting attacks when serving untrusted

repositories. (default: False)

``hidden``

Whether to hide the repository in the hgwebdir index.

(default: False)

``ipv6``

Whether to use IPv6. (default: False)

``logoimg``

File name of the logo image that some templates display on each page.

The file name is relative to ``staticurl``. That is, the full path to

the logo image is "staticurl/logoimg".

If unset, ``hglogo.png`` will be used.

``logourl``

Base URL to use for logos. If unset, ``https://mercurial-scm.org/``

will be used.

``maxchanges``

Maximum number of changes to list on the changelog. (default: 10)

``maxfiles``

Maximum number of files to list per changeset. (default: 10)

``maxshortchanges``

Maximum number of changes to list on the shortlog, graph or filelog

pages. (default: 60)

``name``

Repository name to use in the web interface.

(default: current working directory)

``port``

Port to listen on. (default: 8000)

``prefix``

Prefix path to serve from. (default: '' (server root))

``push_ssl``

Whether to require that inbound pushes be transported over SSL to

prevent password sniffing. (default: True)

``refreshinterval``

How frequently directory listings re-scan the filesystem for new

repositories, in seconds. This is relevant when wildcards are used

to define paths. Depending on how much filesystem traversal is

required, refreshing may negatively impact performance.

Values less than or equal to 0 always refresh.

(default: 20)

``staticurl``

Base URL to use for static files. If unset, static files (e.g. the

hgicon.png favicon) will be served by the CGI script itself. Use

this setting to serve them directly with the HTTP server.

Example: ``http://hgserver/static/``.

``stripes``

How many lines a "zebra stripe" should span in multi-line output.

Set to 0 to disable. (default: 1)

``style``

Which template map style to use. The available options are the names of

subdirectories in the HTML templates path. (default: ``paper``)

Example: ``monoblue``.

``templates``

Where to find the HTML templates. The default path to the HTML templates

can be obtained from ``hg debuginstall``.

``websub``

----------

Web substitution filter definition. You can use this section to

define a set of regular expression substitution patterns which

let you automatically modify the hgweb server output.

The default hgweb templates only apply these substitution patterns

on the revision description fields. You can apply them anywhere

you want when you create your own templates by adding calls to the

"websub" filter (usually after calling the "escape" filter).

This can be used, for example, to convert issue references to links

to your issue tracker, or to convert "markdown-like" syntax into

HTML (see the examples below).

Each entry in this section names a substitution filter.

The value of each entry defines the substitution expression itself.

The websub expressions follow the old interhg extension syntax,

which in turn imitates the Unix sed replacement syntax::

patternname = s/SEARCH_REGEX/REPLACE_EXPRESSION/[i]

You can use any separator other than "/". The final "i" is optional

and indicates that the search must be case insensitive.

Examples::

[websub]

issues = s|issue(\d+)|<a href="http://bts.example.org/issue\1">issue\1</a>|i

italic = s/\b_(\S+)_\b/<i>\1<\/i>/

bold = s/\*\b(\S+)\b\*/<b>\1<\/b>/

``worker``

----------

Parallel master/worker configuration. We currently perform working

directory updates in parallel on Unix-like systems, which greatly

helps performance.

``numcpus``

Number of CPUs to use for parallel operations. A zero or

negative value is treated as ``use the default``.

(default: 4 or the number of CPUs on the system, whichever is larger)

``backgroundclose``

Whether to enable closing file handles on background threads during certain

operations. Some platforms aren't very efficient at closing file

handles that have been written or appended to. By performing file closing

on background threads, file write rate can increase substantially.

(default: true on Windows, false elsewhere)

``backgroundcloseminfilecount``

Minimum number of files required to trigger background file closing.

Operations not writing this many files won't start background close

threads.

(default: 2048)

``backgroundclosemaxqueue``

The maximum number of opened file handles waiting to be closed in the

background. This option only has an effect if ``backgroundclose`` is

enabled.

(default: 384)

``backgroundclosethreadcount``

Number of threads to process background file closes. Only relevant if

``backgroundclose`` is enabled.

(default: 4)

	Site-wide shortcuts
/	Use quick search box
g h	Goto home page
g g	Goto my private gists page
g G	Goto my public gists page
g 0-9	Goto bookmarked items from 0-9
n r	New repository page
n g	New gist page

	Repositories
g s	Goto summary page
g c	Goto changelog page
g f	Goto files page
g F	Goto files page with file search activated
g p	Goto pull requests page
g o	Goto repository settings
g O	Goto repository access permissions settings
t s	Toggle sidebar on some pages