##// END OF EJS Templates
packaging: stage files and dynamically generate WiX installer...
packaging: stage files and dynamically generate WiX installer Like we did for Inno, we want to make the WiX installer "dumb" and simply consume source files from a directory tree rather than have to define every single file in installer files. This will greatly decrease the amount of effort required to maintain the WiX installer since we don't have to think that much about keeping files in sync. This commit changes the WiX packager to populate a staging directory as part of packaging. After it does so, it scans that directory and dynamically generates WiX XML defining the content within. The IDs and GUIDs being generated are deterministic. So, upgrades should work as expected in Windows Installer land. (WiX has a "heat" tool that can generate XML by walking the filesystem but it doesn't have this deterministic property, sadly.) As part of this change, GUIDs are now effectively reset. So the next upgrade should be a complete wipe and replace. This could potentially cause issues. But in my local testing, I was able to upgrade an existing 5.1.2 install without issue. Compared to the previous commit, the installed files differ in the following: * A ReleaseNotes.txt file is now included * A hgrc.d/editor.rc file is now generated (mercurial.rc has been updated to reflect this logical change to the content source) * All files are marked as read-only. Previously, only a subset of files were. This should help prevent unwanted tampering. Although we may want to consider use cases like modifying template files... This change also means that Inno and WiX are now using very similar code for managing the install layout. This means that on disk both packages are nearly identical. The differences in install layout are as follows: * Inno has a Copying.txt vs a COPYING.rtf for WiX. (The WiX installer wants to use RTF.) * Inno has a Mercurial.url file that is an internet shortcut to www.mercurial-scm.org. (This could potentially be removed.) * Inno includes msvc[mpr]90.dll files and WiX does not. (WiX installs the MSVC runtime via merge modules.) * Inno includes unins000.{dat,exe} files. (WiX's state is managed by Windows Installer, which places things elsewhere.) Because file lists are dynamically generated now, the test ensuring things remain in sync has been deleted. Good riddance. While this is a huge step towards unifying the Windows installers, there's still some improvements that can be made. But I think it is worth celebrating the milestone of getting both Inno and WiX to essentially share core packaging code and workflows. That should make it much easier to change the installers going forward. This will aid support of Python 3. Differential Revision: https://phab.mercurial-scm.org/D7173

File last commit:

r43207:69de49c4 default
r44022:94eac340 default
Show More
compiler.h
147 lines | 5.0 KiB | text/x-c | CLexer
/*
* Copyright (c) 2016-present, Yann Collet, Facebook, Inc.
* All rights reserved.
*
* This source code is licensed under both the BSD-style license (found in the
* LICENSE file in the root directory of this source tree) and the GPLv2 (found
* in the COPYING file in the root directory of this source tree).
* You may select, at your option, one of the above-listed licenses.
*/
#ifndef ZSTD_COMPILER_H
#define ZSTD_COMPILER_H
/*-*******************************************************
* Compiler specifics
*********************************************************/
/* force inlining */
#if !defined(ZSTD_NO_INLINE)
#if defined (__GNUC__) || defined(__cplusplus) || defined(__STDC_VERSION__) && __STDC_VERSION__ >= 199901L /* C99 */
# define INLINE_KEYWORD inline
#else
# define INLINE_KEYWORD
#endif
#if defined(__GNUC__) || defined(__ICCARM__)
# define FORCE_INLINE_ATTR __attribute__((always_inline))
#elif defined(_MSC_VER)
# define FORCE_INLINE_ATTR __forceinline
#else
# define FORCE_INLINE_ATTR
#endif
#else
#define INLINE_KEYWORD
#define FORCE_INLINE_ATTR
#endif
/**
* FORCE_INLINE_TEMPLATE is used to define C "templates", which take constant
* parameters. They must be inlined for the compiler to eliminate the constant
* branches.
*/
#define FORCE_INLINE_TEMPLATE static INLINE_KEYWORD FORCE_INLINE_ATTR
/**
* HINT_INLINE is used to help the compiler generate better code. It is *not*
* used for "templates", so it can be tweaked based on the compilers
* performance.
*
* gcc-4.8 and gcc-4.9 have been shown to benefit from leaving off the
* always_inline attribute.
*
* clang up to 5.0.0 (trunk) benefit tremendously from the always_inline
* attribute.
*/
#if !defined(__clang__) && defined(__GNUC__) && __GNUC__ >= 4 && __GNUC_MINOR__ >= 8 && __GNUC__ < 5
# define HINT_INLINE static INLINE_KEYWORD
#else
# define HINT_INLINE static INLINE_KEYWORD FORCE_INLINE_ATTR
#endif
/* force no inlining */
#ifdef _MSC_VER
# define FORCE_NOINLINE static __declspec(noinline)
#else
# if defined(__GNUC__) || defined(__ICCARM__)
# define FORCE_NOINLINE static __attribute__((__noinline__))
# else
# define FORCE_NOINLINE static
# endif
#endif
/* target attribute */
#ifndef __has_attribute
#define __has_attribute(x) 0 /* Compatibility with non-clang compilers. */
#endif
#if defined(__GNUC__) || defined(__ICCARM__)
# define TARGET_ATTRIBUTE(target) __attribute__((__target__(target)))
#else
# define TARGET_ATTRIBUTE(target)
#endif
/* Enable runtime BMI2 dispatch based on the CPU.
* Enabled for clang & gcc >=4.8 on x86 when BMI2 isn't enabled by default.
*/
#ifndef DYNAMIC_BMI2
#if ((defined(__clang__) && __has_attribute(__target__)) \
|| (defined(__GNUC__) \
&& (__GNUC__ >= 5 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)))) \
&& (defined(__x86_64__) || defined(_M_X86)) \
&& !defined(__BMI2__)
# define DYNAMIC_BMI2 1
#else
# define DYNAMIC_BMI2 0
#endif
#endif
/* prefetch
* can be disabled, by declaring NO_PREFETCH build macro */
#if defined(NO_PREFETCH)
# define PREFETCH_L1(ptr) (void)(ptr) /* disabled */
# define PREFETCH_L2(ptr) (void)(ptr) /* disabled */
#else
# if defined(_MSC_VER) && (defined(_M_X64) || defined(_M_I86)) /* _mm_prefetch() is not defined outside of x86/x64 */
# include <mmintrin.h> /* https://msdn.microsoft.com/fr-fr/library/84szxsww(v=vs.90).aspx */
# define PREFETCH_L1(ptr) _mm_prefetch((const char*)(ptr), _MM_HINT_T0)
# define PREFETCH_L2(ptr) _mm_prefetch((const char*)(ptr), _MM_HINT_T1)
# elif defined(__GNUC__) && ( (__GNUC__ >= 4) || ( (__GNUC__ == 3) && (__GNUC_MINOR__ >= 1) ) )
# define PREFETCH_L1(ptr) __builtin_prefetch((ptr), 0 /* rw==read */, 3 /* locality */)
# define PREFETCH_L2(ptr) __builtin_prefetch((ptr), 0 /* rw==read */, 2 /* locality */)
# else
# define PREFETCH_L1(ptr) (void)(ptr) /* disabled */
# define PREFETCH_L2(ptr) (void)(ptr) /* disabled */
# endif
#endif /* NO_PREFETCH */
#define CACHELINE_SIZE 64
#define PREFETCH_AREA(p, s) { \
const char* const _ptr = (const char*)(p); \
size_t const _size = (size_t)(s); \
size_t _pos; \
for (_pos=0; _pos<_size; _pos+=CACHELINE_SIZE) { \
PREFETCH_L2(_ptr + _pos); \
} \
}
/* vectorization */
#if !defined(__clang__) && defined(__GNUC__)
# define DONT_VECTORIZE __attribute__((optimize("no-tree-vectorize")))
#else
# define DONT_VECTORIZE
#endif
/* disable warnings */
#ifdef _MSC_VER /* Visual Studio */
# include <intrin.h> /* For Visual 2005 */
# pragma warning(disable : 4100) /* disable: C4100: unreferenced formal parameter */
# pragma warning(disable : 4127) /* disable: C4127: conditional expression is constant */
# pragma warning(disable : 4204) /* disable: C4204: non-constant aggregate initializer */
# pragma warning(disable : 4214) /* disable: C4214: non-int bitfields */
# pragma warning(disable : 4324) /* disable: C4324: padded structure */
#endif
#endif /* ZSTD_COMPILER_H */