##// END OF EJS Templates
upstream » mercurial-mirror
RSS

Clone from https://www.mercurial-scm.org/repo/hg-all

debug: add a method to check the state of, and built an SSL cert chain...
debug: add a method to check the state of, and built an SSL cert chain This is only useful on Windows, and avoids the need to use Internet Explorer to build the certificate chain. I can see this being extended in the future to print information about the certificate(s) to help debug issues on any platform. Maybe even perform some of the python checks listed on the secure connections wiki page. But for now, all I need is 1) a command that can be invoked in a setup script to ensure the certificate is installed, and 2) a command that the user can run if/when a certificate changes in the future. It would have been nice to leverage the sslutil library to pick up host specific settings, but attempting to use sslutil.wrapsocket() failed the 'not sslsocket.cipher()' check in it and aborted. The output is a little more chatty than some commands, but I've seen the update take 10+ seconds, and this is only a debug command.
Siddharth Agarwal - - Load All Authors

File last commit:

r32260:d0d9a4fc default
r33493:9a9f9521 default
Show More
test-http-bundle1.t
405 lines | 16.4 KiB | text/troff | Tads3Lexer
/ tests / test-http-bundle1.t
History | Annotation | Raw |Copy content |Copy permalink
#require serve
This test is a duplicate of 'test-http.t', feel free to factor out
parts that are not bundle1/bundle2 specific.
$ cat << EOF >> $HGRCPATH
> [devel]
> # This test is dedicated to interaction through old bundle
> legacy.exchange = bundle1
> EOF
$ hg init test
$ cd test
$ echo foo>foo
$ mkdir foo.d foo.d/bAr.hg.d foo.d/baR.d.hg
$ echo foo>foo.d/foo
$ echo bar>foo.d/bAr.hg.d/BaR
$ echo bar>foo.d/baR.d.hg/bAR
$ hg commit -A -m 1
adding foo
adding foo.d/bAr.hg.d/BaR
adding foo.d/baR.d.hg/bAR
adding foo.d/foo
$ hg serve -p $HGPORT -d --pid-file=../hg1.pid -E ../error.log
$ hg serve --config server.uncompressed=False -p $HGPORT1 -d --pid-file=../hg2.pid
Test server address cannot be reused
#if windows
$ hg serve -p $HGPORT1 2>&1
abort: cannot start server at 'localhost:$HGPORT1': * (glob)
[255]
#else
$ hg serve -p $HGPORT1 2>&1
abort: cannot start server at 'localhost:$HGPORT1': Address already in use
[255]
#endif
$ cd ..
$ cat hg1.pid hg2.pid >> $DAEMON_PIDS
clone via stream
$ hg clone --uncompressed http://localhost:$HGPORT/ copy 2>&1
streaming all changes
6 files to transfer, 606 bytes of data
transferred * bytes in * seconds (*/sec) (glob)
searching for changes
no changes found
updating to branch default
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg verify -R copy
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
4 files, 1 changesets, 4 total revisions
try to clone via stream, should use pull instead
$ hg clone --uncompressed http://localhost:$HGPORT1/ copy2
warning: stream clone requested but server has them disabled
requesting all changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 4 changes to 4 files
updating to branch default
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
try to clone via stream but missing requirements, so should use pull instead
$ cat > $TESTTMP/removesupportedformat.py << EOF
> from mercurial import localrepo
> def extsetup(ui):
> localrepo.localrepository.supportedformats.remove('generaldelta')
> EOF
$ hg clone --config extensions.rsf=$TESTTMP/removesupportedformat.py --uncompressed http://localhost:$HGPORT/ copy3
warning: stream clone requested but client is missing requirements: generaldelta
(see https://www.mercurial-scm.org/wiki/MissingRequirement for more information)
requesting all changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 4 changes to 4 files
updating to branch default
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
clone via pull
$ hg clone http://localhost:$HGPORT1/ copy-pull
requesting all changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 4 changes to 4 files
updating to branch default
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg verify -R copy-pull
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
4 files, 1 changesets, 4 total revisions
$ cd test
$ echo bar > bar
$ hg commit -A -d '1 0' -m 2
adding bar
$ cd ..
clone over http with --update
$ hg clone http://localhost:$HGPORT1/ updated --update 0
requesting all changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 5 changes to 5 files
updating to branch default
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg log -r . -R updated
changeset: 0:8b6053c928fe
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: 1
$ rm -rf updated
incoming via HTTP
$ hg clone http://localhost:$HGPORT1/ --rev 0 partial
adding changesets
adding manifests
adding file changes
added 1 changesets with 4 changes to 4 files
updating to branch default
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd partial
$ touch LOCAL
$ hg ci -qAm LOCAL
$ hg incoming http://localhost:$HGPORT1/ --template '{desc}\n'
comparing with http://localhost:$HGPORT1/
searching for changes
2
$ cd ..
pull
$ cd copy-pull
$ cat >> .hg/hgrc <<EOF
> [hooks]
> changegroup = sh -c "printenv.py changegroup"
> EOF
$ hg pull
pulling from http://localhost:$HGPORT1/
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
changegroup hook: HG_HOOKNAME=changegroup HG_HOOKTYPE=changegroup HG_NODE=5fed3813f7f5e1824344fdc9cf8f63bb662c292d HG_NODE_LAST=5fed3813f7f5e1824344fdc9cf8f63bb662c292d HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=http://localhost:$HGPORT1/
(run 'hg update' to get a working copy)
$ cd ..
clone from invalid URL
$ hg clone http://localhost:$HGPORT/bad
abort: HTTP Error 404: Not Found
[255]
test http authentication
+ use the same server to test server side streaming preference
$ cd test
$ cat << EOT > userpass.py
> import base64
> from mercurial.hgweb import common
> def perform_authentication(hgweb, req, op):
> auth = req.env.get('HTTP_AUTHORIZATION')
> if not auth:
> raise common.ErrorResponse(common.HTTP_UNAUTHORIZED, 'who',
> [('WWW-Authenticate', 'Basic Realm="mercurial"')])
> if base64.b64decode(auth.split()[1]).split(':', 1) != ['user', 'pass']:
> raise common.ErrorResponse(common.HTTP_FORBIDDEN, 'no')
> def extsetup():
> common.permhooks.insert(0, perform_authentication)
> EOT
$ hg serve --config extensions.x=userpass.py -p $HGPORT2 -d --pid-file=pid \
> --config server.preferuncompressed=True \
> --config web.push_ssl=False --config web.allow_push=* -A ../access.log
$ cat pid >> $DAEMON_PIDS
$ cat << EOF > get_pass.py
> import getpass
> def newgetpass(arg):
> return "pass"
> getpass.getpass = newgetpass
> EOF
$ hg id http://localhost:$HGPORT2/
abort: http authorization required for http://localhost:$HGPORT2/
[255]
$ hg id http://localhost:$HGPORT2/
abort: http authorization required for http://localhost:$HGPORT2/
[255]
$ hg id --config ui.interactive=true --config extensions.getpass=get_pass.py http://user@localhost:$HGPORT2/
http authorization required for http://localhost:$HGPORT2/
realm: mercurial
user: user
password: 5fed3813f7f5
$ hg id http://user:pass@localhost:$HGPORT2/
5fed3813f7f5
$ echo '[auth]' >> .hg/hgrc
$ echo 'l.schemes=http' >> .hg/hgrc
$ echo 'l.prefix=lo' >> .hg/hgrc
$ echo 'l.username=user' >> .hg/hgrc
$ echo 'l.password=pass' >> .hg/hgrc
$ hg id http://localhost:$HGPORT2/
5fed3813f7f5
$ hg id http://localhost:$HGPORT2/
5fed3813f7f5
$ hg id http://user@localhost:$HGPORT2/
5fed3813f7f5
$ hg clone http://user:pass@localhost:$HGPORT2/ dest 2>&1
streaming all changes
7 files to transfer, 916 bytes of data
transferred * bytes in * seconds (*/sec) (glob)
searching for changes
no changes found
updating to branch default
5 files updated, 0 files merged, 0 files removed, 0 files unresolved
--pull should override server's preferuncompressed
$ hg clone --pull http://user:pass@localhost:$HGPORT2/ dest-pull 2>&1
requesting all changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 5 changes to 5 files
updating to branch default
5 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg id http://user2@localhost:$HGPORT2/
abort: http authorization required for http://localhost:$HGPORT2/
[255]
$ hg id http://user:pass2@localhost:$HGPORT2/
abort: HTTP Error 403: no
[255]
$ hg -R dest tag -r tip top
$ hg -R dest push http://user:pass@localhost:$HGPORT2/
pushing to http://user:***@localhost:$HGPORT2/
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 1 changesets with 1 changes to 1 files
$ hg rollback -q
$ sed 's/.*] "/"/' < ../access.log
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=branchmap HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=stream_out HTTP/1.1" 401 - x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=stream_out HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D5fed3813f7f5e1824344fdc9cf8f63bb662c292d x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=getbundle HTTP/1.1" 200 - x-hgarg-1:common=0000000000000000000000000000000000000000&heads=5fed3813f7f5e1824344fdc9cf8f63bb662c292d x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 403 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D7f4e523d01f2cc3765ac8934da3d14db775ff872 x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=branchmap HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=branchmap HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"POST /?cmd=unbundle HTTP/1.1" 200 - x-hgarg-1:heads=686173686564+5eb5abfefeea63c80dd7553bcc3783f37e0c5524* (glob)
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
$ cd ..
clone of serve with repo in root and unserved subrepo (issue2970)
$ hg --cwd test init sub
$ echo empty > test/sub/empty
$ hg --cwd test/sub add empty
$ hg --cwd test/sub commit -qm 'add empty'
$ hg --cwd test/sub tag -r 0 something
$ echo sub = sub > test/.hgsub
$ hg --cwd test add .hgsub
$ hg --cwd test commit -qm 'add subrepo'
$ hg clone http://localhost:$HGPORT noslash-clone
requesting all changes
adding changesets
adding manifests
adding file changes
added 3 changesets with 7 changes to 7 files
updating to branch default
abort: HTTP Error 404: Not Found
[255]
$ hg clone http://localhost:$HGPORT/ slash-clone
requesting all changes
adding changesets
adding manifests
adding file changes
added 3 changesets with 7 changes to 7 files
updating to branch default
abort: HTTP Error 404: Not Found
[255]
check error log
$ cat error.log
Check error reporting while pulling/cloning
$ $RUNTESTDIR/killdaemons.py
$ hg -R test serve -p $HGPORT -d --pid-file=hg3.pid -E error.log --config extensions.crash=${TESTDIR}/crashgetbundler.py
$ cat hg3.pid >> $DAEMON_PIDS
$ hg clone http://localhost:$HGPORT/ abort-clone
requesting all changes
abort: remote error:
this is an exercise
[255]
$ cat error.log
disable pull-based clones
$ hg -R test serve -p $HGPORT1 -d --pid-file=hg4.pid -E error.log --config server.disablefullbundle=True
$ cat hg4.pid >> $DAEMON_PIDS
$ hg clone http://localhost:$HGPORT1/ disable-pull-clone
requesting all changes
abort: remote error:
server has pull-based clones disabled
[255]
... but keep stream clones working
$ hg clone --uncompressed --noupdate http://localhost:$HGPORT1/ test-stream-clone
streaming all changes
* files to transfer, * of data (glob)
transferred * in * seconds (* KB/sec) (glob)
searching for changes
no changes found
... and also keep partial clones and pulls working
$ hg clone http://localhost:$HGPORT1 --rev 0 test-partial-clone
adding changesets
adding manifests
adding file changes
added 1 changesets with 4 changes to 4 files
updating to branch default
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg pull -R test-partial-clone
pulling from http://localhost:$HGPORT1/
searching for changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 3 changes to 3 files
(run 'hg update' to get a working copy)
$ cat error.log