##// END OF EJS Templates
upstream » mercurial-mirror
RSS

Clone from https://www.mercurial-scm.org/repo/hg-all

dirstate: deal with read-race for pure python code...
dirstate: deal with read-race for pure python code If we cannot read the dirstate data, this is probably because a writing process wrote it under our feet. So refresh the docket and try again a handful of time.
marmoute - - Load All Authors

File last commit:

r51132:a3b1ab5f stable
r51132:a3b1ab5f stable
Show More
test-dirstate-read-race.t
569 lines | 12.2 KiB | text/troff | Tads3Lexer
/ tests / test-dirstate-read-race.t
History | Annotation | Raw |Copy content |Copy permalink
==============================================================================
Check potential race conditions between a dirstate's read and other operations
==============================================================================
#testcases dirstate-v1 dirstate-v2-append dirstate-v2-rewrite
#testcases pre-all-read pre-some-read
Some commands, like `hg status`, do not need to take the wlock but need to
access dirstate data.
Other commands might update the dirstate data while this happens.
This can create issues if repository data is read in the wrong order, or for
the dirstate-v2 format where the data is contained in multiple files.
This test file is meant to test various cases where such parallel operations
happen and make sure the reading process behaves fine. We do so with a `hg
status` command since it is probably the most advanced of such read-only
command.
It bears simililarity with `tests/test-dirstate-status-race.t ` but tests a
different type of race.
Setup
=====
$ cat >> $HGRCPATH << EOF
> [storage]
> dirstate-v2.slow-path=allow
> EOF
#if no-dirstate-v1
$ cat >> $HGRCPATH << EOF
> [format]
> use-dirstate-v2=yes
> EOF
#else
$ cat >> $HGRCPATH << EOF
> [format]
> use-dirstate-v2=no
> EOF
#endif
#if dirstate-v2-rewrite
$ d2args="--config devel.dirstate.v2.data_update_mode=force-new"
#endif
#if dirstate-v2-append
$ d2args="--config devel.dirstate.v2.data_update_mode=force-append"
#endif
#if dirstate-v1
$ cfg="devel.sync.dirstate.pre-read-file"
#else
#if pre-all-read
$ cfg="devel.sync.dirstate.pre-read-file"
#else
$ cfg="devel.sync.dirstate.post-docket-read-file"
#endif
#endif
$ directories="dir dir/nested dir2"
$ first_files="dir/nested/a dir/b dir/c dir/d dir2/e f"
$ second_files="g dir/nested/h dir/i dir/j dir2/k dir2/l dir/nested/m"
$ extra_files="dir/n dir/o p q"
$ hg init reference-repo
$ cd reference-repo
$ mkdir -p dir/nested dir2
$ touch -t 200001010000 $first_files $directories
$ hg commit -Aqm "recreate a bunch of files to facilitate dirstate-v2 append"
$ touch -t 200001010010 $second_files $directories
$ hg commit -Aqm "more files to have two commit"
$ hg log -G -v
@ changeset: 1:9a86dcbfb938
| tag: tip
| user: test
| date: Thu Jan 01 00:00:00 1970 +0000
| files: dir/i dir/j dir/nested/h dir/nested/m dir2/k dir2/l g
| description:
| more files to have two commit
|
|
o changeset: 0:4f23db756b09
user: test
date: Thu Jan 01 00:00:00 1970 +0000
files: dir/b dir/c dir/d dir/nested/a dir2/e f
description:
recreate a bunch of files to facilitate dirstate-v2 append
$ hg manifest
dir/b
dir/c
dir/d
dir/i
dir/j
dir/nested/a
dir/nested/h
dir/nested/m
dir2/e
dir2/k
dir2/l
f
g
Add some unknown files and refresh the dirstate
$ touch -t 200001010020 $extra_files
$ hg add dir/o
$ hg remove dir/nested/m
$ hg st --config devel.dirstate.v2.data_update_mode=force-new
A dir/o
R dir/nested/m
? dir/n
? p
? q
$ hg debugstate
n 644 0 2000-01-01 00:00:00 dir/b
n 644 0 2000-01-01 00:00:00 dir/c
n 644 0 2000-01-01 00:00:00 dir/d
n 644 0 2000-01-01 00:10:00 dir/i
n 644 0 2000-01-01 00:10:00 dir/j
n 644 0 2000-01-01 00:00:00 dir/nested/a
n 644 0 2000-01-01 00:10:00 dir/nested/h
r ?????????????????????????????????? dir/nested/m (glob)
a ?????????????????????????????????? dir/o (glob)
n 644 0 2000-01-01 00:00:00 dir2/e
n 644 0 2000-01-01 00:10:00 dir2/k
n 644 0 2000-01-01 00:10:00 dir2/l
n 644 0 2000-01-01 00:00:00 f
n 644 0 2000-01-01 00:10:00 g
$ hg debugstate > ../reference
$ cd ..
Actual Testing
==============
Race with a `hg add`
-------------------
$ cp -a reference-repo race-with-add
$ cd race-with-add
spin a `hg status` with some caches to update
$ hg st >$TESTTMP/status-race-lock.out 2>$TESTTMP/status-race-lock.log \
> --config rhg.on-unsupported=abort \
> --config ${cfg}=$TESTTMP/status-race-lock \
> &
$ $RUNTESTDIR/testlib/wait-on-file 5 $TESTTMP/status-race-lock.waiting
Add a file
$ hg $d2args add dir/n
$ touch $TESTTMP/status-race-lock
$ wait
The file should in a "added" state
$ hg status
A dir/n
A dir/o
R dir/nested/m
? p
? q
The status process should return a consistent result and not crash.
#if dirstate-v1
$ cat $TESTTMP/status-race-lock.out
A dir/n
A dir/o
R dir/nested/m
? p
? q
$ cat $TESTTMP/status-race-lock.log
#else
#if rhg
#if pre-all-read
$ cat $TESTTMP/status-race-lock.out
A dir/n
A dir/o
R dir/nested/m
? p
? q
$ cat $TESTTMP/status-race-lock.log
#else
#if dirstate-v2-append
$ cat $TESTTMP/status-race-lock.out
A dir/o
R dir/nested/m
? dir/n
? p
? q
$ cat $TESTTMP/status-race-lock.log
#else
$ cat $TESTTMP/status-race-lock.out
$ cat $TESTTMP/status-race-lock.log
abort: dirstate-v2 parse error: not enough bytes on disk
#endif
#endif
#else
#if rust
#if dirstate-v2-rewrite
$ cat $TESTTMP/status-race-lock.out
$ cat $TESTTMP/status-race-lock.log
abort: $ENOENT$: '$TESTTMP/race-with-add/.hg/dirstate.* (glob)
#else
$ cat $TESTTMP/status-race-lock.out
A dir/o
R dir/nested/m
? dir/n
? p
? q
$ cat $TESTTMP/status-race-lock.log
#endif
#else
$ cat $TESTTMP/status-race-lock.out
A dir/n
A dir/o
R dir/nested/m
? p
? q
$ cat $TESTTMP/status-race-lock.log
#endif
#endif
#endif
final cleanup
$ rm $TESTTMP/status-race-lock $TESTTMP/status-race-lock.waiting
$ cd ..
Race with a `hg commit`
-----------------------
$ cp -a reference-repo race-with-commit
$ cd race-with-commit
spin a `hg status with some cache to update
$ hg st >$TESTTMP/status-race-lock.out 2>$TESTTMP/status-race-lock.log \
> --config rhg.on-unsupported=abort \
> --config ${cfg}=$TESTTMP/status-race-lock \
> &
$ $RUNTESTDIR/testlib/wait-on-file 5 $TESTTMP/status-race-lock.waiting
Add a do a commit
$ hg status
A dir/o
R dir/nested/m
? dir/n
? p
? q
$ hg $d2args commit -m 'racing commit'
$ touch $TESTTMP/status-race-lock
$ wait
commit was created, and status is now clean
$ hg log -GT '{node|short} {desc}\n'
@ 02a67a77ee9b racing commit
|
o 9a86dcbfb938 more files to have two commit
|
o 4f23db756b09 recreate a bunch of files to facilitate dirstate-v2 append
$ hg status
? dir/n
? p
? q
The status process should return a consistent result and not crash.
#if dirstate-v1
$ cat $TESTTMP/status-race-lock.out
M dir/o (no-rhg !)
? dir/n
? p
? q
$ cat $TESTTMP/status-race-lock.log
warning: ignoring unknown working parent 02a67a77ee9b! (no-rhg !)
#else
#if rhg
#if pre-all-read
$ cat $TESTTMP/status-race-lock.out
? dir/n
? p
? q
$ cat $TESTTMP/status-race-lock.log
#else
#if dirstate-v2-append
$ cat $TESTTMP/status-race-lock.out
A dir/o
R dir/nested/m
? dir/n
? p
? q
$ cat $TESTTMP/status-race-lock.log
#else
$ cat $TESTTMP/status-race-lock.out
$ cat $TESTTMP/status-race-lock.log
abort: dirstate-v2 parse error: not enough bytes on disk
#endif
#endif
#else
#if rust
#if dirstate-v2-rewrite
$ cat $TESTTMP/status-race-lock.out
$ cat $TESTTMP/status-race-lock.log
abort: $ENOENT$: '$TESTTMP/race-with-commit/.hg/dirstate.* (glob)
#else
$ cat $TESTTMP/status-race-lock.out
A dir/o
R dir/nested/m
? dir/n
? p
? q
$ cat $TESTTMP/status-race-lock.log
#endif
#else
$ cat $TESTTMP/status-race-lock.out
M dir/o
? dir/n
? p
? q
$ cat $TESTTMP/status-race-lock.log
warning: ignoring unknown working parent 02a67a77ee9b!
#endif
#endif
#endif
final cleanup
$ rm $TESTTMP/status-race-lock $TESTTMP/status-race-lock.waiting
$ cd ..
Race with a `hg update`
-----------------------
$ cp -a reference-repo race-with-update
$ cd race-with-update
spin a `hg status` with some caches to update
$ hg st >$TESTTMP/status-race-lock.out 2>$TESTTMP/status-race-lock.log \
> --config rhg.on-unsupported=abort \
> --config ${cfg}=$TESTTMP/status-race-lock \
> &
$ $RUNTESTDIR/testlib/wait-on-file 5 $TESTTMP/status-race-lock.waiting
do an update
$ hg status
A dir/o
R dir/nested/m
? dir/n
? p
? q
$ hg log -GT '{node|short} {desc}\n'
@ 9a86dcbfb938 more files to have two commit
|
o 4f23db756b09 recreate a bunch of files to facilitate dirstate-v2 append
$ hg $d2args update --merge ".~1"
0 files updated, 0 files merged, 6 files removed, 0 files unresolved
$ touch $TESTTMP/status-race-lock
$ wait
#if rhg dirstate-v2-append pre-some-read
$ hg log -GT '{node|short} {desc}\n'
@ 9a86dcbfb938 more files to have two commit
|
o 4f23db756b09 recreate a bunch of files to facilitate dirstate-v2 append
$ hg status
A dir/o
R dir/nested/m
! dir/i
! dir/j
! dir/nested/h
! dir2/k
! dir2/l
! g
? dir/n
? p
? q
#else
$ hg log -GT '{node|short} {desc}\n'
o 9a86dcbfb938 more files to have two commit
|
@ 4f23db756b09 recreate a bunch of files to facilitate dirstate-v2 append
$ hg status
A dir/o
? dir/n
? p
? q
#endif
The status process should return a consistent result and not crash.
#if dirstate-v1
$ cat $TESTTMP/status-race-lock.out
A dir/o
? dir/n
? p
? q
$ cat $TESTTMP/status-race-lock.log
#else
#if rhg
#if pre-all-read
$ cat $TESTTMP/status-race-lock.out
A dir/o
? dir/n
? p
? q
$ cat $TESTTMP/status-race-lock.log
#else
#if dirstate-v2-append
$ cat $TESTTMP/status-race-lock.out
A dir/o
R dir/nested/m
! dir/i
! dir/j
! dir/nested/h
! dir2/k
! dir2/l
! g
? dir/n
? p
? q
$ cat $TESTTMP/status-race-lock.log
#else
$ cat $TESTTMP/status-race-lock.out
$ cat $TESTTMP/status-race-lock.log
abort: dirstate-v2 parse error: not enough bytes on disk
#endif
#endif
#else
#if rust
#if dirstate-v2-rewrite
$ cat $TESTTMP/status-race-lock.out
$ cat $TESTTMP/status-race-lock.log
abort: $ENOENT$: '$TESTTMP/race-with-update/.hg/dirstate.* (glob)
#else
$ cat $TESTTMP/status-race-lock.out
A dir/o
R dir/nested/m
! dir/i
! dir/j
! dir/nested/h
! dir2/k
! dir2/l
! g
? dir/n
? p
? q
$ cat $TESTTMP/status-race-lock.log
#endif
#else
$ cat $TESTTMP/status-race-lock.out
A dir/o
? dir/n
? p
? q
$ cat $TESTTMP/status-race-lock.log
#endif
#endif
#endif
final cleanup
$ rm $TESTTMP/status-race-lock $TESTTMP/status-race-lock.waiting
$ cd ..
Race with a cache updating `hg status`
--------------------------------------
It is interesting to race with "read-only" operation (that still update its cache)
$ cp -a reference-repo race-with-status
$ cd race-with-status
spin a `hg status` with some caches to update
$ hg st >$TESTTMP/status-race-lock.out 2>$TESTTMP/status-race-lock.log \
> --config rhg.on-unsupported=abort \
> --config ${cfg}=$TESTTMP/status-race-lock \
> &
$ $RUNTESTDIR/testlib/wait-on-file 5 $TESTTMP/status-race-lock.waiting
do an update
$ touch -t 200001020006 f
$ hg $d2args status
A dir/o
R dir/nested/m
? dir/n
? p
? q
$ touch $TESTTMP/status-race-lock
$ wait
The status process should return a consistent result and not crash.
#if dirstate-v1
$ cat $TESTTMP/status-race-lock.out
A dir/o
R dir/nested/m
? dir/n
? p
? q
$ cat $TESTTMP/status-race-lock.log
#else
#if rhg
#if pre-all-read
$ cat $TESTTMP/status-race-lock.out
A dir/o
R dir/nested/m
? dir/n
? p
? q
$ cat $TESTTMP/status-race-lock.log
#else
#if dirstate-v2-append
$ cat $TESTTMP/status-race-lock.out
A dir/o
R dir/nested/m
? dir/n
? p
? q
$ cat $TESTTMP/status-race-lock.log
#else
$ cat $TESTTMP/status-race-lock.out
$ cat $TESTTMP/status-race-lock.log
abort: dirstate-v2 parse error: not enough bytes on disk
#endif
#endif
#else
#if rust
#if dirstate-v2-rewrite
$ cat $TESTTMP/status-race-lock.out
$ cat $TESTTMP/status-race-lock.log
abort: $ENOENT$: '$TESTTMP/race-with-status/.hg/dirstate.* (glob)
#else
$ cat $TESTTMP/status-race-lock.out
A dir/o
R dir/nested/m
? dir/n
? p
? q
$ cat $TESTTMP/status-race-lock.log
#endif
#else
$ cat $TESTTMP/status-race-lock.out
A dir/o
R dir/nested/m
? dir/n
? p
? q
$ cat $TESTTMP/status-race-lock.log
#endif
#endif
#endif
final cleanup
$ rm $TESTTMP/status-race-lock $TESTTMP/status-race-lock.waiting
$ cd ..