##// END OF EJS Templates
revlog: linearize created changegroups in generaldelta revlogs...
revlog: linearize created changegroups in generaldelta revlogs This greatly improves the speed of the bundling process, and often reduces the bundle size considerably. (Although if the repository is already ordered, this has little effect on both time and bundle size.) For non-generaldelta clients, the reduced bundle size translates to a reduced repository size, similar to shrinking the revlogs (which uses the exact same algorithm). For generaldelta clients the difference is minor. When the new bundle format comes, reordering will not be necessary since we can then store the deltaparent relationsships directly. The eventual default behavior for clients and servers is presented in the table below, where "new" implies support for GD as well as the new bundle format: old client new client old server old bundle, no reorder old bundle, no reorder new server, non-GD old bundle, no reorder[1] old bundle, no reorder[2] new server, GD old bundle, reorder[3] new bundle, no reorder[4] [1] reordering is expensive on the server in this case, skip it [2] client can choose to do its own redelta here [3] reordering is needed because otherwise the pull does a lot of extra work on the server [4] reordering isn't needed because client can get deltabase in bundle format Currently, the default is to reorder on GD-servers, and not otherwise. A new setting, bundle.reorder, has been added to override the default reordering behavior. It can be set to either 'auto' (the default), or any true or false value as a standard boolean setting, to either force the reordering on or off regardless of generaldelta. Some timing data from a relatively branch test repository follows. All bundling is done with --all --type none options. Non-generaldelta, non-shrunk repo: ----------------------------------- Size: 276M Without reorder (default): Bundle time: 14.4 seconds Bundle size: 939M With reorder: Bundle time: 1 minute, 29.3 seconds Bundle size: 381M Generaldelta, non-shrunk repo: ----------------------------------- Size: 87M Without reorder: Bundle time: 2 minutes, 1.4 seconds Bundle size: 939M With reorder (default): Bundle time: 25.5 seconds Bundle size: 381M

File last commit:

r14363:82f3b0f3 default
r14365:a8e3931e default
Show More
sshrepo.py
214 lines | 6.1 KiB | text/x-python | PythonLexer
# sshrepo.py - ssh repository proxy class for mercurial
#
# Copyright 2005, 2006 Matt Mackall <mpm@selenic.com>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
from i18n import _
import util, error, wireproto
class remotelock(object):
def __init__(self, repo):
self.repo = repo
def release(self):
self.repo.unlock()
self.repo = None
def __del__(self):
if self.repo:
self.release()
class sshrepository(wireproto.wirerepository):
def __init__(self, ui, path, create=False):
self._url = path
self.ui = ui
u = util.url(path, parsequery=False, parsefragment=False)
if u.scheme != 'ssh' or not u.host or u.path is None:
self._abort(error.RepoError(_("couldn't parse location %s") % path))
self.user = u.user
if u.passwd is not None:
self._abort(error.RepoError(_("password in URL not supported")))
self.host = u.host
self.port = u.port
self.path = u.path or "."
sshcmd = self.ui.config("ui", "ssh", "ssh")
remotecmd = self.ui.config("ui", "remotecmd", "hg")
args = util.sshargs(sshcmd, self.host, self.user, self.port)
if create:
cmd = '%s %s "%s init %s"'
cmd = cmd % (sshcmd, args, remotecmd, self.path)
ui.note(_('running %s\n') % cmd)
res = util.system(cmd)
if res != 0:
self._abort(error.RepoError(_("could not create remote repo")))
self.validate_repo(ui, sshcmd, args, remotecmd)
def url(self):
return self._url
def validate_repo(self, ui, sshcmd, args, remotecmd):
# cleanup up previous run
self.cleanup()
cmd = '%s %s "%s -R %s serve --stdio"'
cmd = cmd % (sshcmd, args, remotecmd, self.path)
cmd = util.quotecommand(cmd)
ui.note(_('running %s\n') % cmd)
self.pipeo, self.pipei, self.pipee = util.popen3(cmd)
# skip any noise generated by remote shell
self._callstream("hello")
r = self._callstream("between", pairs=("%s-%s" % ("0"*40, "0"*40)))
lines = ["", "dummy"]
max_noise = 500
while lines[-1] and max_noise:
l = r.readline()
self.readerr()
if lines[-1] == "1\n" and l == "\n":
break
if l:
ui.debug("remote: ", l)
lines.append(l)
max_noise -= 1
else:
self._abort(error.RepoError(_("no suitable response from remote hg")))
self.capabilities = set()
for l in reversed(lines):
if l.startswith("capabilities:"):
self.capabilities.update(l[:-1].split(":")[1].split())
break
def readerr(self):
while 1:
size = util.fstat(self.pipee).st_size
if size == 0:
break
s = self.pipee.read(size)
if not s:
break
for l in s.splitlines():
self.ui.status(_("remote: "), l, '\n')
def _abort(self, exception):
self.cleanup()
raise exception
def cleanup(self):
try:
self.pipeo.close()
self.pipei.close()
# read the error descriptor until EOF
for l in self.pipee:
self.ui.status(_("remote: "), l)
self.pipee.close()
except:
pass
__del__ = cleanup
def _callstream(self, cmd, **args):
self.ui.debug("sending %s command\n" % cmd)
self.pipeo.write("%s\n" % cmd)
_func, names = wireproto.commands[cmd]
keys = names.split()
wireargs = {}
for k in keys:
if k == '*':
wireargs['*'] = args
break
else:
wireargs[k] = args[k]
del args[k]
for k, v in sorted(wireargs.iteritems()):
self.pipeo.write("%s %d\n" % (k, len(v)))
if isinstance(v, dict):
for dk, dv in v.iteritems():
self.pipeo.write("%s %d\n" % (dk, len(dv)))
self.pipeo.write(dv)
else:
self.pipeo.write(v)
self.pipeo.flush()
return self.pipei
def _call(self, cmd, **args):
self._callstream(cmd, **args)
return self._recv()
def _callpush(self, cmd, fp, **args):
r = self._call(cmd, **args)
if r:
return '', r
while 1:
d = fp.read(4096)
if not d:
break
self._send(d)
self._send("", flush=True)
r = self._recv()
if r:
return '', r
return self._recv(), ''
def _decompress(self, stream):
return stream
def _recv(self):
l = self.pipei.readline()
self.readerr()
try:
l = int(l)
except ValueError:
self._abort(error.ResponseError(_("unexpected response:"), l))
return self.pipei.read(l)
def _send(self, data, flush=False):
self.pipeo.write("%d\n" % len(data))
if data:
self.pipeo.write(data)
if flush:
self.pipeo.flush()
self.readerr()
def lock(self):
self._call("lock")
return remotelock(self)
def unlock(self):
self._call("unlock")
def addchangegroup(self, cg, source, url):
'''Send a changegroup to the remote server. Return an integer
similar to unbundle(). DEPRECATED, since it requires locking the
remote.'''
d = self._call("addchangegroup")
if d:
self._abort(error.RepoError(_("push refused: %s") % d))
while 1:
d = cg.read(4096)
if not d:
break
self.pipeo.write(d)
self.readerr()
self.pipeo.flush()
self.readerr()
r = self._recv()
if not r:
return 1
try:
return int(r)
except ValueError:
self._abort(error.ResponseError(_("unexpected response:"), r))
instance = sshrepository