##// END OF EJS Templates
sparse-revlog: set max delta chain length to on thousand...
sparse-revlog: set max delta chain length to on thousand The new snapshot system used in the sparse-revlog case gave us some small size benefit so far. However its most important property is to gracefully handle harder limit on delta chainlength. Long delta chain has a very detrimental impact on read (and write) performance in revlog. Being able to shorter them provide a great boost. However, shorting delta used to result significantly lower compression ratio. The intermediate snapshots effectively suppress most of this effect (even all in some case). # Effect on the test repository The repository we use for test is not "realistic" but can still show this in action using an unreasonably low chain limit. Limiting the chain length show a sizeable increase but stay under control: +6% for limit=15; +15% for limit=10. Without the snapshot system the increase is significantly bigger: +45% for limit=15; +80% for limit=10. Even slightly larger than without delta chain limit, the resulting size is still smaller than before we started doing snapshots. Here is a table for comparison. *Since the repository is not branchy, the initial sparse-revlog version does not bring much benefit compare to the non-sparse one): chain length limit | none | limit=15 | limit=10 | without sparse-revlog | 62 818 987 | 112 664 615 | 131 222 574 | without snapshot | 74 365 490 | 108 211 410 | 133 857 764 | with snapshot | 59 230 936 | 63 002 924 | 68 415 329 | # Effect On Real Life Repositories The series provides significant benefits on all kind of repositories. Using `hg debugupgraderepo -o redeltaparent --run`, we recomputed delta chain for various repositories with different settings: - delta chain length: unlimited or 1000 limit - sparse-revlog: enabled or disabled - this series: applied or not applied We can observe multiple types of effect: - On very branchy repositories: * The delta chain limit as low impact on the repo size. * Intermediate snapshot greatly reduces manifest size: - pypy: -80% - netbeans: -95% * The delta chain limit is effective, without a size impact: - netbeans average: 613 -> 282 - private #1 average: 1 068 -> 307 - On more linear repository: * Intermediate snapshot limit the impact of delta chain limit: - mozilla: without the series: +360% with the series: +25% * The delta chain limit provides large improvement: - mozilla's average chain length: unlimited: 15 338 limited: 469 * Despite the chain length limit, the manifest size is reduced: - mercurial: -25% - mozilla: -30% It is clear that the use of chains of intermediate snapshots provide large benefits both in storage size and delta chains quality. We should now switch our effort toward making sure the write performance are acceptable. Then, `sparse-revlog` will be a suitable format for all new repository. # Raw Statistic * no-sparse: general delta repository not using sparse-revlog * no-snapshot: sparse-revlog repository not using this series * snapshot: sparse-revlog repository using this series mercurial Manifest Size: limit | none | 1000 ------------|-------------|------------ no-sparse | 8 021 373 | 8 199 366 no-snapshot | 8 103 561 | 8 259 719 snapshot | 6 137 116 | 6 126 433 Manifest Chain length data limit || none || 1000 || value || average | max || average | max || ------------||---------|---------||---------|---------|| no-sparse || 307 | 1456 || 279 | 1000 || no-snapshot || 312 | 1456 || 283 | 1000 || snapshot || 248 | 1208 || 241 | 1000 || Full Store Size limit | none | 1000 ------------|-------------|------------ no-sparse | 51 013 198 | 51 201 574 no-snapshot | 50 930 795 | 51 141 006 snapshot | 48 072 037 | 48 093 572 pypy Manifest Size: limit | none | 1000 ------------|-------------|------------ no-sparse | 193 987 784 | 193 987 784 no-snapshot | 163 171 745 | 163 312 229 snapshot | 34 605 900 | 34 600 750 Manifest Chain length data limit || none || 1000 || value || average | max || average | max || ------------||---------|---------||---------|---------|| no-sparse || 101 | 692 || 101 | 692 || no-snapshot || 151 | 1307 || 148 | 1000 || snapshot || 128 | 1309 || 125 | 1000 || Full Store Size limit | none | 1000 ------------|-------------|------------ no-sparse | 495 931 473 | 495 931 473 no-snapshot | 465 441 017 | 465 581 501 snapshot | 355 467 301 | 355 472 451 Mozilla Manifest Size: limit | none | 1000 ------------|----------------|--------------- no-sparse | 416 757 148 | 1 869 009 668 no-snapshot | 401 592 370 | 1 843 493 795 snapshot | 224 359 521 | 284 615 500 Manifest Chain length data limit || none || 1000 || value || average | max || average | max || ------------||---------|---------||---------|---------|| no-sparse || 15 333 | 58 980 || 468 | 1 000 || no-snapshot || 15 336 | 58 980 || 469 | 1 000 || snapshot || 15 338 | 58 983 || 469 | 1 000 || Full Store Size limit | none | 1000 ------------|----------------|--------------- no-sparse | 2 712 477 887 | 4 164 995 451 no-snapshot | 2 698 887 835 | 4 141 054 304 snapshot | 2 518 130 385 | 2 578 587 596 Netbeans Manifest Size: limit | none | 1000 ------------|----------------|--------------- no-sparse | 4 766 794 101 | 4 870 642 687 no-snapshot | 4 334 806 082 | 4 428 681 309 snapshot | 232 659 666 | 240 330 665 Manifest Chain length data limit || none || 1000 || value || average | max || average | max || ------------||---------|---------||---------|---------|| no-sparse || 597 | 6802 || 254 | 1 000 || no-snapshot || 648 | 6 802 || 305 | 1 000 || snapshot || 613 | 6 804 || 282 | 1 000 || Full Store Size limit | none | 1000 ------------|----------------|--------------- no-sparse | 5 807 347 998 | 5 911 196 584 no-snapshot | 5 375 398 602 | 5 469 273 829 snapshot | 1 282 519 928 | 1 290 190 927 Private repo #1 Manifest Size: limit | none | 1000 ------------|-----------------|--------------- no-sparse | 41 389 010 840 | 41 398 162 091 no-snapshot | 9 737 319 435 | 10 223 773 150 snapshot | 744 215 807 | 747 961 822 Manifest Chain length data limit || none || 1000 || value || average | max || average | max || ------------||---------|---------||---------|---------|| no-sparse || 245 | 8 885 || 81 | 1 000 || no-snapshot || 1 225 | 8 885 || 336 | 1 000 || snapshot || 1 068 | 7 909 || 307 | 1 000 || Full Store Size limit | none | 1000 ------------|----------------|--------------- no-sparse | 49 646 065 126 | 49 655 216 377 no-snapshot | 17 924 862 856 | 18 411 316 571 snapshot | 9 009 024 710 | 9 012 770 725 Private repo #2 We currently have less data available for that repository. * Before is a sparse-revlog repository without this series * After is a sparse-revlog repository with this series + 1000 chain limit Manifest Size: Before: 1 531 485 040 bytes After: 1 091 422 451 bytes Manifest Chain: Before: 2 218 avg; 6 575 Max After: 442 avg; 1 000 Max Full Store Size Before: 15 203 955 615 after: 8 207 180 693

File last commit:

r39488:481db51c merge default
r39542:b66ea3fc default
Show More
parsers.c
797 lines | 20.8 KiB | text/x-c | CLexer
/*
parsers.c - efficient content parsing
Copyright 2008 Matt Mackall <mpm@selenic.com> and others
This software may be used and distributed according to the terms of
the GNU General Public License, incorporated herein by reference.
*/
#include <Python.h>
#include <ctype.h>
#include <stddef.h>
#include <string.h>
#include "bitmanipulation.h"
#include "charencode.h"
#include "util.h"
#ifdef IS_PY3K
/* The mapping of Python types is meant to be temporary to get Python
* 3 to compile. We should remove this once Python 3 support is fully
* supported and proper types are used in the extensions themselves. */
#define PyInt_Check PyLong_Check
#define PyInt_FromLong PyLong_FromLong
#define PyInt_FromSsize_t PyLong_FromSsize_t
#define PyInt_AsLong PyLong_AsLong
#endif
static const char *const versionerrortext = "Python minor version mismatch";
static PyObject *dict_new_presized(PyObject *self, PyObject *args)
{
Py_ssize_t expected_size;
if (!PyArg_ParseTuple(args, "n:make_presized_dict", &expected_size))
return NULL;
return _dict_new_presized(expected_size);
}
/*
* This code assumes that a manifest is stitched together with newline
* ('\n') characters.
*/
static PyObject *parse_manifest(PyObject *self, PyObject *args)
{
PyObject *mfdict, *fdict;
char *str, *start, *end;
int len;
if (!PyArg_ParseTuple(
args, PY23("O!O!s#:parse_manifest", "O!O!y#:parse_manifest"),
&PyDict_Type, &mfdict, &PyDict_Type, &fdict, &str, &len))
goto quit;
start = str;
end = str + len;
while (start < end) {
PyObject *file = NULL, *node = NULL;
PyObject *flags = NULL;
char *zero = NULL, *newline = NULL;
ptrdiff_t nlen;
zero = memchr(start, '\0', end - start);
if (!zero) {
PyErr_SetString(PyExc_ValueError,
"manifest entry has no separator");
goto quit;
}
newline = memchr(zero + 1, '\n', end - (zero + 1));
if (!newline) {
PyErr_SetString(PyExc_ValueError,
"manifest contains trailing garbage");
goto quit;
}
file = PyBytes_FromStringAndSize(start, zero - start);
if (!file)
goto bail;
nlen = newline - zero - 1;
node = unhexlify(zero + 1, nlen > 40 ? 40 : (Py_ssize_t)nlen);
if (!node)
goto bail;
if (nlen > 40) {
flags = PyBytes_FromStringAndSize(zero + 41, nlen - 40);
if (!flags)
goto bail;
if (PyDict_SetItem(fdict, file, flags) == -1)
goto bail;
}
if (PyDict_SetItem(mfdict, file, node) == -1)
goto bail;
start = newline + 1;
Py_XDECREF(flags);
Py_XDECREF(node);
Py_XDECREF(file);
continue;
bail:
Py_XDECREF(flags);
Py_XDECREF(node);
Py_XDECREF(file);
goto quit;
}
Py_INCREF(Py_None);
return Py_None;
quit:
return NULL;
}
static inline dirstateTupleObject *make_dirstate_tuple(char state, int mode,
int size, int mtime)
{
dirstateTupleObject *t =
PyObject_New(dirstateTupleObject, &dirstateTupleType);
if (!t)
return NULL;
t->state = state;
t->mode = mode;
t->size = size;
t->mtime = mtime;
return t;
}
static PyObject *dirstate_tuple_new(PyTypeObject *subtype, PyObject *args,
PyObject *kwds)
{
/* We do all the initialization here and not a tp_init function because
* dirstate_tuple is immutable. */
dirstateTupleObject *t;
char state;
int size, mode, mtime;
if (!PyArg_ParseTuple(args, "ciii", &state, &mode, &size, &mtime))
return NULL;
t = (dirstateTupleObject *)subtype->tp_alloc(subtype, 1);
if (!t)
return NULL;
t->state = state;
t->mode = mode;
t->size = size;
t->mtime = mtime;
return (PyObject *)t;
}
static void dirstate_tuple_dealloc(PyObject *o)
{
PyObject_Del(o);
}
static Py_ssize_t dirstate_tuple_length(PyObject *o)
{
return 4;
}
static PyObject *dirstate_tuple_item(PyObject *o, Py_ssize_t i)
{
dirstateTupleObject *t = (dirstateTupleObject *)o;
switch (i) {
case 0:
return PyBytes_FromStringAndSize(&t->state, 1);
case 1:
return PyInt_FromLong(t->mode);
case 2:
return PyInt_FromLong(t->size);
case 3:
return PyInt_FromLong(t->mtime);
default:
PyErr_SetString(PyExc_IndexError, "index out of range");
return NULL;
}
}
static PySequenceMethods dirstate_tuple_sq = {
dirstate_tuple_length, /* sq_length */
0, /* sq_concat */
0, /* sq_repeat */
dirstate_tuple_item, /* sq_item */
0, /* sq_ass_item */
0, /* sq_contains */
0, /* sq_inplace_concat */
0 /* sq_inplace_repeat */
};
PyTypeObject dirstateTupleType = {
PyVarObject_HEAD_INIT(NULL, 0) /* header */
"dirstate_tuple", /* tp_name */
sizeof(dirstateTupleObject), /* tp_basicsize */
0, /* tp_itemsize */
(destructor)dirstate_tuple_dealloc, /* tp_dealloc */
0, /* tp_print */
0, /* tp_getattr */
0, /* tp_setattr */
0, /* tp_compare */
0, /* tp_repr */
0, /* tp_as_number */
&dirstate_tuple_sq, /* tp_as_sequence */
0, /* tp_as_mapping */
0, /* tp_hash */
0, /* tp_call */
0, /* tp_str */
0, /* tp_getattro */
0, /* tp_setattro */
0, /* tp_as_buffer */
Py_TPFLAGS_DEFAULT, /* tp_flags */
"dirstate tuple", /* tp_doc */
0, /* tp_traverse */
0, /* tp_clear */
0, /* tp_richcompare */
0, /* tp_weaklistoffset */
0, /* tp_iter */
0, /* tp_iternext */
0, /* tp_methods */
0, /* tp_members */
0, /* tp_getset */
0, /* tp_base */
0, /* tp_dict */
0, /* tp_descr_get */
0, /* tp_descr_set */
0, /* tp_dictoffset */
0, /* tp_init */
0, /* tp_alloc */
dirstate_tuple_new, /* tp_new */
};
static PyObject *parse_dirstate(PyObject *self, PyObject *args)
{
PyObject *dmap, *cmap, *parents = NULL, *ret = NULL;
PyObject *fname = NULL, *cname = NULL, *entry = NULL;
char state, *cur, *str, *cpos;
int mode, size, mtime;
unsigned int flen, len, pos = 40;
int readlen;
if (!PyArg_ParseTuple(
args, PY23("O!O!s#:parse_dirstate", "O!O!y#:parse_dirstate"),
&PyDict_Type, &dmap, &PyDict_Type, &cmap, &str, &readlen))
goto quit;
len = readlen;
/* read parents */
if (len < 40) {
PyErr_SetString(PyExc_ValueError,
"too little data for parents");
goto quit;
}
parents = Py_BuildValue(PY23("s#s#", "y#y#"), str, 20, str + 20, 20);
if (!parents)
goto quit;
/* read filenames */
while (pos >= 40 && pos < len) {
if (pos + 17 > len) {
PyErr_SetString(PyExc_ValueError,
"overflow in dirstate");
goto quit;
}
cur = str + pos;
/* unpack header */
state = *cur;
mode = getbe32(cur + 1);
size = getbe32(cur + 5);
mtime = getbe32(cur + 9);
flen = getbe32(cur + 13);
pos += 17;
cur += 17;
if (flen > len - pos) {
PyErr_SetString(PyExc_ValueError,
"overflow in dirstate");
goto quit;
}
entry =
(PyObject *)make_dirstate_tuple(state, mode, size, mtime);
cpos = memchr(cur, 0, flen);
if (cpos) {
fname = PyBytes_FromStringAndSize(cur, cpos - cur);
cname = PyBytes_FromStringAndSize(
cpos + 1, flen - (cpos - cur) - 1);
if (!fname || !cname ||
PyDict_SetItem(cmap, fname, cname) == -1 ||
PyDict_SetItem(dmap, fname, entry) == -1)
goto quit;
Py_DECREF(cname);
} else {
fname = PyBytes_FromStringAndSize(cur, flen);
if (!fname || PyDict_SetItem(dmap, fname, entry) == -1)
goto quit;
}
Py_DECREF(fname);
Py_DECREF(entry);
fname = cname = entry = NULL;
pos += flen;
}
ret = parents;
Py_INCREF(ret);
quit:
Py_XDECREF(fname);
Py_XDECREF(cname);
Py_XDECREF(entry);
Py_XDECREF(parents);
return ret;
}
/*
* Build a set of non-normal and other parent entries from the dirstate dmap
*/
static PyObject *nonnormalotherparententries(PyObject *self, PyObject *args)
{
PyObject *dmap, *fname, *v;
PyObject *nonnset = NULL, *otherpset = NULL, *result = NULL;
Py_ssize_t pos;
if (!PyArg_ParseTuple(args, "O!:nonnormalentries", &PyDict_Type, &dmap))
goto bail;
nonnset = PySet_New(NULL);
if (nonnset == NULL)
goto bail;
otherpset = PySet_New(NULL);
if (otherpset == NULL)
goto bail;
pos = 0;
while (PyDict_Next(dmap, &pos, &fname, &v)) {
dirstateTupleObject *t;
if (!dirstate_tuple_check(v)) {
PyErr_SetString(PyExc_TypeError,
"expected a dirstate tuple");
goto bail;
}
t = (dirstateTupleObject *)v;
if (t->state == 'n' && t->size == -2) {
if (PySet_Add(otherpset, fname) == -1) {
goto bail;
}
}
if (t->state == 'n' && t->mtime != -1)
continue;
if (PySet_Add(nonnset, fname) == -1)
goto bail;
}
result = Py_BuildValue("(OO)", nonnset, otherpset);
if (result == NULL)
goto bail;
Py_DECREF(nonnset);
Py_DECREF(otherpset);
return result;
bail:
Py_XDECREF(nonnset);
Py_XDECREF(otherpset);
Py_XDECREF(result);
return NULL;
}
/*
* Efficiently pack a dirstate object into its on-disk format.
*/
static PyObject *pack_dirstate(PyObject *self, PyObject *args)
{
PyObject *packobj = NULL;
PyObject *map, *copymap, *pl, *mtime_unset = NULL;
Py_ssize_t nbytes, pos, l;
PyObject *k, *v = NULL, *pn;
char *p, *s;
int now;
if (!PyArg_ParseTuple(args, "O!O!O!i:pack_dirstate", &PyDict_Type, &map,
&PyDict_Type, &copymap, &PyTuple_Type, &pl, &now))
return NULL;
if (PyTuple_Size(pl) != 2) {
PyErr_SetString(PyExc_TypeError, "expected 2-element tuple");
return NULL;
}
/* Figure out how much we need to allocate. */
for (nbytes = 40, pos = 0; PyDict_Next(map, &pos, &k, &v);) {
PyObject *c;
if (!PyBytes_Check(k)) {
PyErr_SetString(PyExc_TypeError, "expected string key");
goto bail;
}
nbytes += PyBytes_GET_SIZE(k) + 17;
c = PyDict_GetItem(copymap, k);
if (c) {
if (!PyBytes_Check(c)) {
PyErr_SetString(PyExc_TypeError,
"expected string key");
goto bail;
}
nbytes += PyBytes_GET_SIZE(c) + 1;
}
}
packobj = PyBytes_FromStringAndSize(NULL, nbytes);
if (packobj == NULL)
goto bail;
p = PyBytes_AS_STRING(packobj);
pn = PyTuple_GET_ITEM(pl, 0);
if (PyBytes_AsStringAndSize(pn, &s, &l) == -1 || l != 20) {
PyErr_SetString(PyExc_TypeError, "expected a 20-byte hash");
goto bail;
}
memcpy(p, s, l);
p += 20;
pn = PyTuple_GET_ITEM(pl, 1);
if (PyBytes_AsStringAndSize(pn, &s, &l) == -1 || l != 20) {
PyErr_SetString(PyExc_TypeError, "expected a 20-byte hash");
goto bail;
}
memcpy(p, s, l);
p += 20;
for (pos = 0; PyDict_Next(map, &pos, &k, &v);) {
dirstateTupleObject *tuple;
char state;
int mode, size, mtime;
Py_ssize_t len, l;
PyObject *o;
char *t;
if (!dirstate_tuple_check(v)) {
PyErr_SetString(PyExc_TypeError,
"expected a dirstate tuple");
goto bail;
}
tuple = (dirstateTupleObject *)v;
state = tuple->state;
mode = tuple->mode;
size = tuple->size;
mtime = tuple->mtime;
if (state == 'n' && mtime == now) {
/* See pure/parsers.py:pack_dirstate for why we do
* this. */
mtime = -1;
mtime_unset = (PyObject *)make_dirstate_tuple(
state, mode, size, mtime);
if (!mtime_unset)
goto bail;
if (PyDict_SetItem(map, k, mtime_unset) == -1)
goto bail;
Py_DECREF(mtime_unset);
mtime_unset = NULL;
}
*p++ = state;
putbe32((uint32_t)mode, p);
putbe32((uint32_t)size, p + 4);
putbe32((uint32_t)mtime, p + 8);
t = p + 12;
p += 16;
len = PyBytes_GET_SIZE(k);
memcpy(p, PyBytes_AS_STRING(k), len);
p += len;
o = PyDict_GetItem(copymap, k);
if (o) {
*p++ = '\0';
l = PyBytes_GET_SIZE(o);
memcpy(p, PyBytes_AS_STRING(o), l);
p += l;
len += l + 1;
}
putbe32((uint32_t)len, t);
}
pos = p - PyBytes_AS_STRING(packobj);
if (pos != nbytes) {
PyErr_Format(PyExc_SystemError, "bad dirstate size: %ld != %ld",
(long)pos, (long)nbytes);
goto bail;
}
return packobj;
bail:
Py_XDECREF(mtime_unset);
Py_XDECREF(packobj);
Py_XDECREF(v);
return NULL;
}
#define BUMPED_FIX 1
#define USING_SHA_256 2
#define FM1_HEADER_SIZE (4 + 8 + 2 + 2 + 1 + 1 + 1)
static PyObject *readshas(const char *source, unsigned char num,
Py_ssize_t hashwidth)
{
int i;
PyObject *list = PyTuple_New(num);
if (list == NULL) {
return NULL;
}
for (i = 0; i < num; i++) {
PyObject *hash = PyBytes_FromStringAndSize(source, hashwidth);
if (hash == NULL) {
Py_DECREF(list);
return NULL;
}
PyTuple_SET_ITEM(list, i, hash);
source += hashwidth;
}
return list;
}
static PyObject *fm1readmarker(const char *databegin, const char *dataend,
uint32_t *msize)
{
const char *data = databegin;
const char *meta;
double mtime;
int16_t tz;
uint16_t flags;
unsigned char nsuccs, nparents, nmetadata;
Py_ssize_t hashwidth = 20;
PyObject *prec = NULL, *parents = NULL, *succs = NULL;
PyObject *metadata = NULL, *ret = NULL;
int i;
if (data + FM1_HEADER_SIZE > dataend) {
goto overflow;
}
*msize = getbe32(data);
data += 4;
mtime = getbefloat64(data);
data += 8;
tz = getbeint16(data);
data += 2;
flags = getbeuint16(data);
data += 2;
if (flags & USING_SHA_256) {
hashwidth = 32;
}
nsuccs = (unsigned char)(*data++);
nparents = (unsigned char)(*data++);
nmetadata = (unsigned char)(*data++);
if (databegin + *msize > dataend) {
goto overflow;
}
dataend = databegin + *msize; /* narrow down to marker size */
if (data + hashwidth > dataend) {
goto overflow;
}
prec = PyBytes_FromStringAndSize(data, hashwidth);
data += hashwidth;
if (prec == NULL) {
goto bail;
}
if (data + nsuccs * hashwidth > dataend) {
goto overflow;
}
succs = readshas(data, nsuccs, hashwidth);
if (succs == NULL) {
goto bail;
}
data += nsuccs * hashwidth;
if (nparents == 1 || nparents == 2) {
if (data + nparents * hashwidth > dataend) {
goto overflow;
}
parents = readshas(data, nparents, hashwidth);
if (parents == NULL) {
goto bail;
}
data += nparents * hashwidth;
} else {
parents = Py_None;
Py_INCREF(parents);
}
if (data + 2 * nmetadata > dataend) {
goto overflow;
}
meta = data + (2 * nmetadata);
metadata = PyTuple_New(nmetadata);
if (metadata == NULL) {
goto bail;
}
for (i = 0; i < nmetadata; i++) {
PyObject *tmp, *left = NULL, *right = NULL;
Py_ssize_t leftsize = (unsigned char)(*data++);
Py_ssize_t rightsize = (unsigned char)(*data++);
if (meta + leftsize + rightsize > dataend) {
goto overflow;
}
left = PyBytes_FromStringAndSize(meta, leftsize);
meta += leftsize;
right = PyBytes_FromStringAndSize(meta, rightsize);
meta += rightsize;
tmp = PyTuple_New(2);
if (!left || !right || !tmp) {
Py_XDECREF(left);
Py_XDECREF(right);
Py_XDECREF(tmp);
goto bail;
}
PyTuple_SET_ITEM(tmp, 0, left);
PyTuple_SET_ITEM(tmp, 1, right);
PyTuple_SET_ITEM(metadata, i, tmp);
}
ret = Py_BuildValue("(OOHO(di)O)", prec, succs, flags, metadata, mtime,
(int)tz * 60, parents);
goto bail; /* return successfully */
overflow:
PyErr_SetString(PyExc_ValueError, "overflow in obsstore");
bail:
Py_XDECREF(prec);
Py_XDECREF(succs);
Py_XDECREF(metadata);
Py_XDECREF(parents);
return ret;
}
static PyObject *fm1readmarkers(PyObject *self, PyObject *args)
{
const char *data, *dataend;
int datalen;
Py_ssize_t offset, stop;
PyObject *markers = NULL;
if (!PyArg_ParseTuple(args, PY23("s#nn", "y#nn"), &data, &datalen,
&offset, &stop)) {
return NULL;
}
dataend = data + datalen;
data += offset;
markers = PyList_New(0);
if (!markers) {
return NULL;
}
while (offset < stop) {
uint32_t msize;
int error;
PyObject *record = fm1readmarker(data, dataend, &msize);
if (!record) {
goto bail;
}
error = PyList_Append(markers, record);
Py_DECREF(record);
if (error) {
goto bail;
}
data += msize;
offset += msize;
}
return markers;
bail:
Py_DECREF(markers);
return NULL;
}
static char parsers_doc[] = "Efficient content parsing.";
PyObject *encodedir(PyObject *self, PyObject *args);
PyObject *pathencode(PyObject *self, PyObject *args);
PyObject *lowerencode(PyObject *self, PyObject *args);
PyObject *parse_index2(PyObject *self, PyObject *args);
static PyMethodDef methods[] = {
{"pack_dirstate", pack_dirstate, METH_VARARGS, "pack a dirstate\n"},
{"nonnormalotherparententries", nonnormalotherparententries, METH_VARARGS,
"create a set containing non-normal and other parent entries of given "
"dirstate\n"},
{"parse_manifest", parse_manifest, METH_VARARGS, "parse a manifest\n"},
{"parse_dirstate", parse_dirstate, METH_VARARGS, "parse a dirstate\n"},
{"parse_index2", parse_index2, METH_VARARGS, "parse a revlog index\n"},
{"isasciistr", isasciistr, METH_VARARGS, "check if an ASCII string\n"},
{"asciilower", asciilower, METH_VARARGS, "lowercase an ASCII string\n"},
{"asciiupper", asciiupper, METH_VARARGS, "uppercase an ASCII string\n"},
{"dict_new_presized", dict_new_presized, METH_VARARGS,
"construct a dict with an expected size\n"},
{"make_file_foldmap", make_file_foldmap, METH_VARARGS,
"make file foldmap\n"},
{"jsonescapeu8fast", jsonescapeu8fast, METH_VARARGS,
"escape a UTF-8 byte string to JSON (fast path)\n"},
{"encodedir", encodedir, METH_VARARGS, "encodedir a path\n"},
{"pathencode", pathencode, METH_VARARGS, "fncache-encode a path\n"},
{"lowerencode", lowerencode, METH_VARARGS, "lower-encode a path\n"},
{"fm1readmarkers", fm1readmarkers, METH_VARARGS,
"parse v1 obsolete markers\n"},
{NULL, NULL}};
void dirs_module_init(PyObject *mod);
void manifest_module_init(PyObject *mod);
void revlog_module_init(PyObject *mod);
static const int version = 11;
static void module_init(PyObject *mod)
{
PyModule_AddIntConstant(mod, "version", version);
/* This module constant has two purposes. First, it lets us unit test
* the ImportError raised without hard-coding any error text. This
* means we can change the text in the future without breaking tests,
* even across changesets without a recompile. Second, its presence
* can be used to determine whether the version-checking logic is
* present, which also helps in testing across changesets without a
* recompile. Note that this means the pure-Python version of parsers
* should not have this module constant. */
PyModule_AddStringConstant(mod, "versionerrortext", versionerrortext);
dirs_module_init(mod);
manifest_module_init(mod);
revlog_module_init(mod);
if (PyType_Ready(&dirstateTupleType) < 0)
return;
Py_INCREF(&dirstateTupleType);
PyModule_AddObject(mod, "dirstatetuple",
(PyObject *)&dirstateTupleType);
}
static int check_python_version(void)
{
PyObject *sys = PyImport_ImportModule("sys"), *ver;
long hexversion;
if (!sys)
return -1;
ver = PyObject_GetAttrString(sys, "hexversion");
Py_DECREF(sys);
if (!ver)
return -1;
hexversion = PyInt_AsLong(ver);
Py_DECREF(ver);
/* sys.hexversion is a 32-bit number by default, so the -1 case
* should only occur in unusual circumstances (e.g. if sys.hexversion
* is manually set to an invalid value). */
if ((hexversion == -1) || (hexversion >> 16 != PY_VERSION_HEX >> 16)) {
PyErr_Format(PyExc_ImportError,
"%s: The Mercurial extension "
"modules were compiled with Python " PY_VERSION
", but "
"Mercurial is currently using Python with "
"sys.hexversion=%ld: "
"Python %s\n at: %s",
versionerrortext, hexversion, Py_GetVersion(),
Py_GetProgramFullPath());
return -1;
}
return 0;
}
#ifdef IS_PY3K
static struct PyModuleDef parsers_module = {PyModuleDef_HEAD_INIT, "parsers",
parsers_doc, -1, methods};
PyMODINIT_FUNC PyInit_parsers(void)
{
PyObject *mod;
if (check_python_version() == -1)
return NULL;
mod = PyModule_Create(&parsers_module);
module_init(mod);
return mod;
}
#else
PyMODINIT_FUNC initparsers(void)
{
PyObject *mod;
if (check_python_version() == -1)
return;
mod = Py_InitModule3("parsers", methods, parsers_doc);
module_init(mod);
}
#endif