##// END OF EJS Templates
verify: allow the storage to signal when renames can be tested on `skipread`...
verify: allow the storage to signal when renames can be tested on `skipread` This applies the new marker in the lfs handler to show it in action, and adds the test mentioned at the beginning of the series to show that fulltext isn't necessary in the LFS case. The existing `skipread` isn't enough, because it is also set if an error occurs reading the revlog data, or the data is censored. It could probably be cleared, but then it technically violates the interface contract. That wouldn't matter for the existing verify algorithm, but it isn't clear how that will change as alternate storage support is added. The flag is probably pretty revlog specific, given the comments in verify.py. But there's already filelog specific stuff in there and I'm not sure what future storage will bring, so I don't want to over-engineer this. Likewise, I'm not sure that we want the verify method for each storage type to completely drive the bus when it comes to detecting renames, so I don't want to go down the rabbithole of having verifyintegrity() return metadata hints at this point. Differential Revision: https://phab.mercurial-scm.org/D7713

File last commit:

r43375:649d3ac3 default
r44530:b9e174d4 default
Show More
win32text.py
224 lines | 6.5 KiB | text/x-python | PythonLexer
# win32text.py - LF <-> CRLF/CR translation utilities for Windows/Mac users
#
# Copyright 2005, 2007-2009 Matt Mackall <mpm@selenic.com> and others
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
'''perform automatic newline conversion (DEPRECATED)
Deprecation: The win32text extension requires each user to configure
the extension again and again for each clone since the configuration
is not copied when cloning.
We have therefore made the ``eol`` as an alternative. The ``eol``
uses a version controlled file for its configuration and each clone
will therefore use the right settings from the start.
To perform automatic newline conversion, use::
[extensions]
win32text =
[encode]
** = cleverencode:
# or ** = macencode:
[decode]
** = cleverdecode:
# or ** = macdecode:
If not doing conversion, to make sure you do not commit CRLF/CR by accident::
[hooks]
pretxncommit.crlf = python:hgext.win32text.forbidcrlf
# or pretxncommit.cr = python:hgext.win32text.forbidcr
To do the same check on a server to prevent CRLF/CR from being
pushed or pulled::
[hooks]
pretxnchangegroup.crlf = python:hgext.win32text.forbidcrlf
# or pretxnchangegroup.cr = python:hgext.win32text.forbidcr
'''
from __future__ import absolute_import
import re
from mercurial.i18n import _
from mercurial.node import short
from mercurial import (
pycompat,
registrar,
)
from mercurial.utils import stringutil
# Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = b'ships-with-hg-core'
configtable = {}
configitem = registrar.configitem(configtable)
configitem(
b'win32text', b'warn', default=True,
)
# regexp for single LF without CR preceding.
re_single_lf = re.compile(b'(^|[^\r])\n', re.MULTILINE)
newlinestr = {b'\r\n': b'CRLF', b'\r': b'CR'}
filterstr = {b'\r\n': b'clever', b'\r': b'mac'}
def checknewline(s, newline, ui=None, repo=None, filename=None):
# warn if already has 'newline' in repository.
# it might cause unexpected eol conversion.
# see issue 302:
# https://bz.mercurial-scm.org/302
if newline in s and ui and filename and repo:
ui.warn(
_(
b'WARNING: %s already has %s line endings\n'
b'and does not need EOL conversion by the win32text plugin.\n'
b'Before your next commit, please reconsider your '
b'encode/decode settings in \nMercurial.ini or %s.\n'
)
% (filename, newlinestr[newline], repo.vfs.join(b'hgrc'))
)
def dumbdecode(s, cmd, **kwargs):
checknewline(s, b'\r\n', **kwargs)
# replace single LF to CRLF
return re_single_lf.sub(b'\\1\r\n', s)
def dumbencode(s, cmd):
return s.replace(b'\r\n', b'\n')
def macdumbdecode(s, cmd, **kwargs):
checknewline(s, b'\r', **kwargs)
return s.replace(b'\n', b'\r')
def macdumbencode(s, cmd):
return s.replace(b'\r', b'\n')
def cleverdecode(s, cmd, **kwargs):
if not stringutil.binary(s):
return dumbdecode(s, cmd, **kwargs)
return s
def cleverencode(s, cmd):
if not stringutil.binary(s):
return dumbencode(s, cmd)
return s
def macdecode(s, cmd, **kwargs):
if not stringutil.binary(s):
return macdumbdecode(s, cmd, **kwargs)
return s
def macencode(s, cmd):
if not stringutil.binary(s):
return macdumbencode(s, cmd)
return s
_filters = {
b'dumbdecode:': dumbdecode,
b'dumbencode:': dumbencode,
b'cleverdecode:': cleverdecode,
b'cleverencode:': cleverencode,
b'macdumbdecode:': macdumbdecode,
b'macdumbencode:': macdumbencode,
b'macdecode:': macdecode,
b'macencode:': macencode,
}
def forbidnewline(ui, repo, hooktype, node, newline, **kwargs):
halt = False
seen = set()
# we try to walk changesets in reverse order from newest to
# oldest, so that if we see a file multiple times, we take the
# newest version as canonical. this prevents us from blocking a
# changegroup that contains an unacceptable commit followed later
# by a commit that fixes the problem.
tip = repo[b'tip']
for rev in pycompat.xrange(
repo.changelog.tiprev(), repo[node].rev() - 1, -1
):
c = repo[rev]
for f in c.files():
if f in seen or f not in tip or f not in c:
continue
seen.add(f)
data = c[f].data()
if not stringutil.binary(data) and newline in data:
if not halt:
ui.warn(
_(
b'attempt to commit or push text file(s) '
b'using %s line endings\n'
)
% newlinestr[newline]
)
ui.warn(_(b'in %s: %s\n') % (short(c.node()), f))
halt = True
if halt and hooktype == b'pretxnchangegroup':
crlf = newlinestr[newline].lower()
filter = filterstr[newline]
ui.warn(
_(
b'\nTo prevent this mistake in your local repository,\n'
b'add to Mercurial.ini or .hg/hgrc:\n'
b'\n'
b'[hooks]\n'
b'pretxncommit.%s = python:hgext.win32text.forbid%s\n'
b'\n'
b'and also consider adding:\n'
b'\n'
b'[extensions]\n'
b'win32text =\n'
b'[encode]\n'
b'** = %sencode:\n'
b'[decode]\n'
b'** = %sdecode:\n'
)
% (crlf, crlf, filter, filter)
)
return halt
def forbidcrlf(ui, repo, hooktype, node, **kwargs):
return forbidnewline(ui, repo, hooktype, node, b'\r\n', **kwargs)
def forbidcr(ui, repo, hooktype, node, **kwargs):
return forbidnewline(ui, repo, hooktype, node, b'\r', **kwargs)
def reposetup(ui, repo):
if not repo.local():
return
for name, fn in pycompat.iteritems(_filters):
repo.adddatafilter(name, fn)
def extsetup(ui):
# deprecated config: win32text.warn
if ui.configbool(b'win32text', b'warn'):
ui.warn(
_(
b"win32text is deprecated: "
b"https://mercurial-scm.org/wiki/Win32TextExtension\n"
)
)