##// END OF EJS Templates
pathcopies: give up any optimization based on `introrev`...
pathcopies: give up any optimization based on `introrev` Between 8a0136f69027 and d98fb3f42f33, we sped up the search for the introduction revision during path copies. However, further checking show that finding the introduction revision is still expensive and that we are better off without it. So we simply drop it and only rely on the linkrev optimisation. I ran `perfpathcopies` on 6989 pair of revision in the pypy repository (`hg perfhelper-pathcopies`. The result is massively in favor of dropping this condition. The result of the copy tracing are unchanged. Attempt to use a smaller changes preserving linkrev usage were unsuccessful, it can return wrong result. The following changesets broke test-mv-cp-st-diff.t - if not f.isintroducedafter(limit): + if limit >= 0 and f.linkrev() < limit: return None Here are various numbers (before this changeset/after this changesets) source destination before after saved-time ratio worth cases e66f24650daf 695dfb0f493b 1.062843 1.246369 -0.183526 1.172675 c979853a3b6a 8d60fe293e79 1.036985 1.196414 -0.159429 1.153743 22349fa2fc33 fbb1c9fd86c0 0.879926 1.038682 -0.158756 1.180420 682b98f3e672 a4878080a536 0.909952 1.063801 -0.153849 1.169074 5adabc9b9848 920958a93997 0.993622 1.147452 -0.153830 1.154817 worse 1% dbfbfcf077e9 aea8f2fd3593 1.016595 1.082999 -0.066404 1.065320 worse 5% c95f1ced15f2 7d29d5e39734 0.453694 0.471156 -0.017462 1.038488 worse 10% 3e144ed1d5b7 2aef0e942480 0.035140 0.037535 -0.002395 1.068156 worse 25% 321fc60db035 801748ba582a 0.009267 0.009325 -0.000058 1.006259 median 2088ce763fc2 e6991321d78b 0.000665 0.000651 0.000014 0.978947 best 25% 915631a97de6 385b31354be6 0.040743 0.040363 0.000380 0.990673 best 10% ad495c36a765 19c10384d3e7 0.431658 0.411490 0.020168 0.953278 best 5% d13ae7d283ae 813c99f810ac 1.141404 1.075346 0.066058 0.942126 best 1% 81593cb4a496 99ae11866969 1.833297 0.063823 1.769474 0.034813 best cases c3b14617fbd7 743a0fcaa4eb 1101.811740 2.735970 1099.075770 0.002483 c3b14617fbd7 9ba6ab77fd29 1116.753953 2.800729 1113.953224 0.002508 058b99d6e81f 57e249b7a3ea 1246.128485 3.042762 1243.085723 0.002442 9a8c361aab49 0354a250d371 1253.111894 3.085796 1250.026098 0.002463 442dbbc53c68 3ec1002a818c 1261.786294 3.138607 1258.647687 0.002487 As one can see, the average case is not really impacted. However, the worth case we get after this changeset are much better than the one we had before it. We have 30 pairs where improvements are above 10 minutes. This reflect in the combined time for all pairs before: 26256s after: 1300s (-95%) If we remove these pathological 30 cases, we still see a significant improvements: before: 1631s after: 1245s (-24%)

File last commit:

r43357:66f2cc21 default
r43469:c16fe77e default
Show More
factotum.py
156 lines | 4.8 KiB | text/x-python | PythonLexer
# factotum.py - Plan 9 factotum integration for Mercurial
#
# Copyright (C) 2012 Steven Stallion <sstallion@gmail.com>
#
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the
# Free Software Foundation; either version 2 of the License, or (at your
# option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
# You should have received a copy of the GNU General Public License along
# with this program; if not, write to the Free Software Foundation, Inc.,
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
'''http authentication with factotum
This extension allows the factotum(4) facility on Plan 9 from Bell Labs
platforms to provide authentication information for HTTP access. Configuration
entries specified in the auth section as well as authentication information
provided in the repository URL are fully supported. If no prefix is specified,
a value of "*" will be assumed.
By default, keys are specified as::
proto=pass service=hg prefix=<prefix> user=<username> !password=<password>
If the factotum extension is unable to read the required key, one will be
requested interactively.
A configuration section is available to customize runtime behavior. By
default, these entries are::
[factotum]
executable = /bin/auth/factotum
mountpoint = /mnt/factotum
service = hg
The executable entry defines the full path to the factotum binary. The
mountpoint entry defines the path to the factotum file service. Lastly, the
service entry controls the service name used when reading keys.
'''
from __future__ import absolute_import
import os
from mercurial.i18n import _
from mercurial.pycompat import setattr
from mercurial.utils import procutil
from mercurial import (
error,
httpconnection,
registrar,
url,
util,
)
urlreq = util.urlreq
passwordmgr = url.passwordmgr
ERRMAX = 128
_executable = _mountpoint = _service = None
configtable = {}
configitem = registrar.configitem(configtable)
configitem(
b'factotum', b'executable', default=b'/bin/auth/factotum',
)
configitem(
b'factotum', b'mountpoint', default=b'/mnt/factotum',
)
configitem(
b'factotum', b'service', default=b'hg',
)
def auth_getkey(self, params):
if not self.ui.interactive():
raise error.Abort(_(b'factotum not interactive'))
if b'user=' not in params:
params = b'%s user?' % params
params = b'%s !password?' % params
os.system(procutil.tonativestr(b"%s -g '%s'" % (_executable, params)))
def auth_getuserpasswd(self, getkey, params):
params = b'proto=pass %s' % params
while True:
fd = os.open(b'%s/rpc' % _mountpoint, os.O_RDWR)
try:
os.write(fd, b'start %s' % params)
l = os.read(fd, ERRMAX).split()
if l[0] == b'ok':
os.write(fd, b'read')
status, user, passwd = os.read(fd, ERRMAX).split(None, 2)
if status == b'ok':
if passwd.startswith(b"'"):
if passwd.endswith(b"'"):
passwd = passwd[1:-1].replace(b"''", b"'")
else:
raise error.Abort(_(b'malformed password string'))
return (user, passwd)
except (OSError, IOError):
raise error.Abort(_(b'factotum not responding'))
finally:
os.close(fd)
getkey(self, params)
def monkeypatch_method(cls):
def decorator(func):
setattr(cls, func.__name__, func)
return func
return decorator
@monkeypatch_method(passwordmgr)
def find_user_password(self, realm, authuri):
user, passwd = self.passwddb.find_user_password(realm, authuri)
if user and passwd:
self._writedebug(user, passwd)
return (user, passwd)
prefix = b''
res = httpconnection.readauthforuri(self.ui, authuri, user)
if res:
_, auth = res
prefix = auth.get(b'prefix')
user, passwd = auth.get(b'username'), auth.get(b'password')
if not user or not passwd:
if not prefix:
prefix = realm.split(b' ')[0].lower()
params = b'service=%s prefix=%s' % (_service, prefix)
if user:
params = b'%s user=%s' % (params, user)
user, passwd = auth_getuserpasswd(self, auth_getkey, params)
self.add_password(realm, authuri, user, passwd)
self._writedebug(user, passwd)
return (user, passwd)
def uisetup(ui):
global _executable
_executable = ui.config(b'factotum', b'executable')
global _mountpoint
_mountpoint = ui.config(b'factotum', b'mountpoint')
global _service
_service = ui.config(b'factotum', b'service')