##// END OF EJS Templates
upstream » mercurial-mirror
RSS

Clone from https://www.mercurial-scm.org/repo/hg-all

wireprotov2: define and implement "manifestdata" command...
wireprotov2: define and implement "manifestdata" command The added command can be used for obtaining manifest data. Given a manifest path and set of manifest nodes, data about manifests can be retrieved. Unlike changeset data, we wish to emit deltas to describe manifest revisions. So the command uses the relatively new API for building delta requests and emitting them. The code calls into deltaparent(), which I'm not very keen of. There's still work to be done in delta generation land so implementation details of storage (e.g. exactly one delta is stored/available) don't creep into higher levels. But we can worry about this later (there is already a TODO on imanifestorage tracking this). On the subject of parent deltas, the server assumes parent revisions exist on the receiving end. This is obviously wrong for shallow clone. I've added TODOs to add a mechanism to the command to allow clients to specify desired behavior. This shouldn't be too difficult to implement. Another big change is that the client must explicitly request manifest nodes to retrieve. This is a major departure from "getbundle," where the server derives relevant manifests as it iterates changesets and sends them automatically. As implemented, the client must transmit each requested node to the server. At 20 bytes per node, we're looking at 2 MB per 100,000 nodes. Plus wire encoding overhead. This isn't ideal for clients with limited upload bandwidth. I plan to address this in the future by allowing alternate mechanisms for defining the revisions to retrieve. One idea is to define a range of changeset revisions whose manifest revisions to retrieve (similar to how "changesetdata" works). We almost certainly want an API to look up an individual manifest by node. And that's where I've chosen to start with the implementation. Again, a theme of this early exchangev2 work is I want to start by building primitives for accessing raw repository data first and see how far we can get with those before we need more complexity. Differential Revision: https://phab.mercurial-scm.org/D4488
Meirambek Omyrzak - - Load All Authors

File last commit:

r39525:f1186c29 default
r39673:c7a7c7e8 default
Show More
test-hardlinks.t
431 lines | 9.8 KiB | text/troff | Tads3Lexer
/ tests / test-hardlinks.t
History | Annotation | Raw |Copy content |Copy permalink
#require hardlink reporevlogstore
$ cat > nlinks.py <<EOF
> from __future__ import print_function
> import sys
> from mercurial import util
> for f in sorted(sys.stdin.readlines()):
> f = f[:-1]
> print(util.nlinks(f), f)
> EOF
$ nlinksdir()
> {
> find "$@" -type f | $PYTHON $TESTTMP/nlinks.py
> }
Some implementations of cp can't create hardlinks (replaces 'cp -al' on Linux):
$ cat > linkcp.py <<EOF
> from __future__ import absolute_import
> import sys
> from mercurial import util
> util.copyfiles(sys.argv[1], sys.argv[2], hardlink=True)
> EOF
$ linkcp()
> {
> $PYTHON $TESTTMP/linkcp.py $1 $2
> }
Prepare repo r1:
$ hg init r1
$ cd r1
$ echo c1 > f1
$ hg add f1
$ hg ci -m0
$ mkdir d1
$ cd d1
$ echo c2 > f2
$ hg add f2
$ hg ci -m1
$ cd ../..
$ nlinksdir r1/.hg/store
1 r1/.hg/store/00changelog.i
1 r1/.hg/store/00manifest.i
1 r1/.hg/store/data/d1/f2.i
1 r1/.hg/store/data/f1.i
1 r1/.hg/store/fncache (repofncache !)
1 r1/.hg/store/phaseroots
1 r1/.hg/store/undo
1 r1/.hg/store/undo.backup.fncache (repofncache !)
1 r1/.hg/store/undo.backupfiles
1 r1/.hg/store/undo.phaseroots
Create hardlinked clone r2:
$ hg clone -U --debug r1 r2 --config progress.debug=true
linking: 1
linking: 2
linking: 3
linking: 4
linking: 5
linking: 6
linking: 7
linked 7 files
Create non-hardlinked clone r3:
$ hg clone --pull r1 r3
requesting all changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 2 files
new changesets 40d85e9847f2:7069c422939c
updating to branch default
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
Repos r1 and r2 should now contain hardlinked files:
$ nlinksdir r1/.hg/store
2 r1/.hg/store/00changelog.i
2 r1/.hg/store/00manifest.i
2 r1/.hg/store/data/d1/f2.i
2 r1/.hg/store/data/f1.i
2 r1/.hg/store/fncache (repofncache !)
1 r1/.hg/store/phaseroots
1 r1/.hg/store/undo
1 r1/.hg/store/undo.backup.fncache (repofncache !)
1 r1/.hg/store/undo.backupfiles
1 r1/.hg/store/undo.phaseroots
$ nlinksdir r2/.hg/store
2 r2/.hg/store/00changelog.i
2 r2/.hg/store/00manifest.i
2 r2/.hg/store/data/d1/f2.i
2 r2/.hg/store/data/f1.i
2 r2/.hg/store/fncache (repofncache !)
Repo r3 should not be hardlinked:
$ nlinksdir r3/.hg/store
1 r3/.hg/store/00changelog.i
1 r3/.hg/store/00manifest.i
1 r3/.hg/store/data/d1/f2.i
1 r3/.hg/store/data/f1.i
1 r3/.hg/store/fncache (repofncache !)
1 r3/.hg/store/phaseroots
1 r3/.hg/store/undo
1 r3/.hg/store/undo.backupfiles
1 r3/.hg/store/undo.phaseroots
Create a non-inlined filelog in r3:
$ cd r3/d1
>>> f = open('data1', 'wb')
>>> for x in range(10000):
... f.write(b"%d\n" % x) and None
>>> f.close()
$ for j in 0 1 2 3 4 5 6 7 8 9; do
> cat data1 >> f2
> hg commit -m$j
> done
$ cd ../..
$ nlinksdir r3/.hg/store
1 r3/.hg/store/00changelog.i
1 r3/.hg/store/00manifest.i
1 r3/.hg/store/data/d1/f2.d
1 r3/.hg/store/data/d1/f2.i
1 r3/.hg/store/data/f1.i
1 r3/.hg/store/fncache (repofncache !)
1 r3/.hg/store/phaseroots
1 r3/.hg/store/undo
1 r3/.hg/store/undo.backup.fncache (repofncache !)
1 r3/.hg/store/undo.backup.phaseroots
1 r3/.hg/store/undo.backupfiles
1 r3/.hg/store/undo.phaseroots
Push to repo r1 should break up most hardlinks in r2:
$ hg -R r2 verify
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
checked 2 changesets with 2 changes to 2 files
$ cd r3
$ hg push
pushing to $TESTTMP/r1
searching for changes
adding changesets
adding manifests
adding file changes
added 10 changesets with 10 changes to 1 files
$ cd ..
$ nlinksdir r2/.hg/store
1 r2/.hg/store/00changelog.i
1 r2/.hg/store/00manifest.i
1 r2/.hg/store/data/d1/f2.i
2 r2/.hg/store/data/f1.i
[12] r2/\.hg/store/fncache (re) (repofncache !)
#if hardlink-whitelisted repofncache
$ nlinksdir r2/.hg/store/fncache
2 r2/.hg/store/fncache
#endif
$ hg -R r2 verify
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
checked 2 changesets with 2 changes to 2 files
$ cd r1
$ hg up
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
Committing a change to f1 in r1 must break up hardlink f1.i in r2:
$ echo c1c1 >> f1
$ hg ci -m00
$ cd ..
$ nlinksdir r2/.hg/store
1 r2/.hg/store/00changelog.i
1 r2/.hg/store/00manifest.i
1 r2/.hg/store/data/d1/f2.i
1 r2/.hg/store/data/f1.i
[12] r2/\.hg/store/fncache (re) (repofncache !)
#if hardlink-whitelisted repofncache
$ nlinksdir r2/.hg/store/fncache
2 r2/.hg/store/fncache
#endif
Create a file which exec permissions we will change
$ cd r3
$ echo "echo hello world" > f3
$ hg add f3
$ hg ci -mf3
$ cd ..
$ cd r3
$ hg tip --template '{rev}:{node|short}\n'
12:d3b77733a28a
$ echo bla > f1
$ chmod +x f3
$ hg ci -m1
$ cd ..
Create hardlinked copy r4 of r3 (on Linux, we would call 'cp -al'):
$ linkcp r3 r4
'checklink' is produced by hardlinking a symlink, which is undefined whether
the symlink should be followed or not. It does behave differently on Linux and
BSD. Just remove it so the test pass on both platforms.
$ rm -f r4/.hg/cache/checklink
r4 has hardlinks in the working dir (not just inside .hg):
$ nlinksdir r4
2 r4/.hg/00changelog.i
2 r4/.hg/branch
2 r4/.hg/cache/branch2-base
2 r4/.hg/cache/branch2-served
2 r4/.hg/cache/checkisexec (execbit !)
? r4/.hg/cache/checklink-target (glob) (symlink !)
2 r4/.hg/cache/checknoexec (execbit !)
2 r4/.hg/cache/manifestfulltextcache (reporevlogstore !)
2 r4/.hg/cache/rbc-names-v1
2 r4/.hg/cache/rbc-revs-v1
2 r4/.hg/dirstate
2 r4/.hg/fsmonitor.state (fsmonitor !)
2 r4/.hg/hgrc
2 r4/.hg/last-message.txt
2 r4/.hg/requires
2 r4/.hg/store/00changelog.i
2 r4/.hg/store/00manifest.i
2 r4/.hg/store/data/d1/f2.d
2 r4/.hg/store/data/d1/f2.i
2 r4/.hg/store/data/f1.i
2 r4/.hg/store/data/f3.i
2 r4/.hg/store/fncache (repofncache !)
2 r4/.hg/store/phaseroots
2 r4/.hg/store/undo
2 r4/.hg/store/undo.backup.fncache (repofncache !)
2 r4/.hg/store/undo.backup.phaseroots
2 r4/.hg/store/undo.backupfiles
2 r4/.hg/store/undo.phaseroots
[24] r4/\.hg/undo\.backup\.dirstate (re)
2 r4/.hg/undo.bookmarks
2 r4/.hg/undo.branch
2 r4/.hg/undo.desc
[24] r4/\.hg/undo\.dirstate (re)
2 r4/d1/data1
2 r4/d1/f2
2 r4/f1
2 r4/f3
Update back to revision 12 in r4 should break hardlink of file f1 and f3:
#if hardlink-whitelisted
$ nlinksdir r4/.hg/undo.backup.dirstate r4/.hg/undo.dirstate
4 r4/.hg/undo.backup.dirstate
4 r4/.hg/undo.dirstate
#endif
$ hg -R r4 up 12
2 files updated, 0 files merged, 0 files removed, 0 files unresolved (execbit !)
1 files updated, 0 files merged, 0 files removed, 0 files unresolved (no-execbit !)
$ nlinksdir r4
2 r4/.hg/00changelog.i
1 r4/.hg/branch
2 r4/.hg/cache/branch2-base
2 r4/.hg/cache/branch2-served
2 r4/.hg/cache/checkisexec (execbit !)
2 r4/.hg/cache/checklink-target (symlink !)
2 r4/.hg/cache/checknoexec (execbit !)
2 r4/.hg/cache/manifestfulltextcache (reporevlogstore !)
2 r4/.hg/cache/rbc-names-v1
2 r4/.hg/cache/rbc-revs-v1
1 r4/.hg/dirstate
1 r4/.hg/fsmonitor.state (fsmonitor !)
2 r4/.hg/hgrc
2 r4/.hg/last-message.txt
2 r4/.hg/requires
2 r4/.hg/store/00changelog.i
2 r4/.hg/store/00manifest.i
2 r4/.hg/store/data/d1/f2.d
2 r4/.hg/store/data/d1/f2.i
2 r4/.hg/store/data/f1.i
2 r4/.hg/store/data/f3.i
2 r4/.hg/store/fncache
2 r4/.hg/store/phaseroots
2 r4/.hg/store/undo
2 r4/.hg/store/undo.backup.fncache (repofncache !)
2 r4/.hg/store/undo.backup.phaseroots
2 r4/.hg/store/undo.backupfiles
2 r4/.hg/store/undo.phaseroots
[24] r4/\.hg/undo\.backup\.dirstate (re)
2 r4/.hg/undo.bookmarks
2 r4/.hg/undo.branch
2 r4/.hg/undo.desc
[24] r4/\.hg/undo\.dirstate (re)
2 r4/d1/data1
2 r4/d1/f2
1 r4/f1
1 r4/f3 (execbit !)
2 r4/f3 (no-execbit !)
#if hardlink-whitelisted
$ nlinksdir r4/.hg/undo.backup.dirstate r4/.hg/undo.dirstate
4 r4/.hg/undo.backup.dirstate
4 r4/.hg/undo.dirstate
#endif
Test hardlinking outside hg:
$ mkdir x
$ echo foo > x/a
$ linkcp x y
$ echo bar >> y/a
No diff if hardlink:
$ diff x/a y/a
Test mq hardlinking:
$ echo "[extensions]" >> $HGRCPATH
$ echo "mq=" >> $HGRCPATH
$ hg init a
$ cd a
$ hg qimport -n foo - << EOF
> # HG changeset patch
> # Date 1 0
> diff -r 2588a8b53d66 a
> --- /dev/null Thu Jan 01 00:00:00 1970 +0000
> +++ b/a Wed Jul 23 15:54:29 2008 +0200
> @@ -0,0 +1,1 @@
> +a
> EOF
adding foo to series file
$ hg qpush
applying foo
now at: foo
$ cd ..
$ linkcp a b
$ cd b
$ hg qimport -n bar - << EOF
> # HG changeset patch
> # Date 2 0
> diff -r 2588a8b53d66 a
> --- /dev/null Thu Jan 01 00:00:00 1970 +0000
> +++ b/b Wed Jul 23 15:54:29 2008 +0200
> @@ -0,0 +1,1 @@
> +b
> EOF
adding bar to series file
$ hg qpush
applying bar
now at: bar
$ cat .hg/patches/status
430ed4828a74fa4047bc816a25500f7472ab4bfe:foo
4e7abb4840c46a910f6d7b4d3c3fc7e5209e684c:bar
$ cat .hg/patches/series
foo
bar
$ cat ../a/.hg/patches/status
430ed4828a74fa4047bc816a25500f7472ab4bfe:foo
$ cat ../a/.hg/patches/series
foo
Test tags hardlinking:
$ hg qdel -r qbase:qtip
patch foo finalized without changeset message
patch bar finalized without changeset message
$ hg tag -l lfoo
$ hg tag foo
$ cd ..
$ linkcp b c
$ cd c
$ hg tag -l -r 0 lbar
$ hg tag -r 0 bar
$ cat .hgtags
4e7abb4840c46a910f6d7b4d3c3fc7e5209e684c foo
430ed4828a74fa4047bc816a25500f7472ab4bfe bar
$ cat .hg/localtags
4e7abb4840c46a910f6d7b4d3c3fc7e5209e684c lfoo
430ed4828a74fa4047bc816a25500f7472ab4bfe lbar
$ cat ../b/.hgtags
4e7abb4840c46a910f6d7b4d3c3fc7e5209e684c foo
$ cat ../b/.hg/localtags
4e7abb4840c46a910f6d7b4d3c3fc7e5209e684c lfoo
$ cd ..