##// END OF EJS Templates
upstream » mercurial-mirror
RSS

Clone from https://www.mercurial-scm.org/repo/hg-all

wireprotov2: define and implement "manifestdata" command...
wireprotov2: define and implement "manifestdata" command The added command can be used for obtaining manifest data. Given a manifest path and set of manifest nodes, data about manifests can be retrieved. Unlike changeset data, we wish to emit deltas to describe manifest revisions. So the command uses the relatively new API for building delta requests and emitting them. The code calls into deltaparent(), which I'm not very keen of. There's still work to be done in delta generation land so implementation details of storage (e.g. exactly one delta is stored/available) don't creep into higher levels. But we can worry about this later (there is already a TODO on imanifestorage tracking this). On the subject of parent deltas, the server assumes parent revisions exist on the receiving end. This is obviously wrong for shallow clone. I've added TODOs to add a mechanism to the command to allow clients to specify desired behavior. This shouldn't be too difficult to implement. Another big change is that the client must explicitly request manifest nodes to retrieve. This is a major departure from "getbundle," where the server derives relevant manifests as it iterates changesets and sends them automatically. As implemented, the client must transmit each requested node to the server. At 20 bytes per node, we're looking at 2 MB per 100,000 nodes. Plus wire encoding overhead. This isn't ideal for clients with limited upload bandwidth. I plan to address this in the future by allowing alternate mechanisms for defining the revisions to retrieve. One idea is to define a range of changeset revisions whose manifest revisions to retrieve (similar to how "changesetdata" works). We almost certainly want an API to look up an individual manifest by node. And that's where I've chosen to start with the implementation. Again, a theme of this early exchangev2 work is I want to start by building primitives for accessing raw repository data first and see how far we can get with those before we need more complexity. Differential Revision: https://phab.mercurial-scm.org/D4488
Gregory Szorc - - Load All Authors

File last commit:

r37864:b4b7427b default
r39673:c7a7c7e8 default
Show More
test-treediscovery.t
576 lines | 19.5 KiB | text/troff | Tads3Lexer
/ tests / test-treediscovery.t
History | Annotation | Raw |Copy content |Copy permalink
Tests discovery against servers without getbundle support:
$ CAP="getbundle bundle2"
$ . "$TESTDIR/notcapable"
$ cat >> $HGRCPATH <<EOF
> [ui]
> logtemplate="{rev} {node|short}: {desc} {branches}\n"
> EOF
Setup HTTP server control:
$ remote=http://localhost:$HGPORT/
$ export remote
$ tstart() {
> echo '[web]' > $1/.hg/hgrc
> echo 'push_ssl = false' >> $1/.hg/hgrc
> echo 'allow_push = *' >> $1/.hg/hgrc
> hg serve -R $1 -p $HGPORT -d --pid-file=hg.pid -A access.log -E errors.log
> cat hg.pid >> $DAEMON_PIDS
> }
$ tstop() {
> killdaemons.py
> [ "$1" ] && cut -d' ' -f6- access.log && cat errors.log
> rm access.log errors.log
> }
Both are empty:
$ hg init empty1
$ hg init empty2
$ tstart empty2
$ hg incoming -R empty1 $remote
comparing with http://localhost:$HGPORT/
no changes found
[1]
$ hg outgoing -R empty1 $remote
comparing with http://localhost:$HGPORT/
no changes found
[1]
$ hg pull -R empty1 $remote
pulling from http://localhost:$HGPORT/
no changes found
$ hg push -R empty1 $remote
pushing to http://localhost:$HGPORT/
no changes found
[1]
$ tstop
Base repo:
$ hg init main
$ cd main
$ hg debugbuilddag -mo '+2:tbase @name1 +3:thead1 <tbase @name2 +4:thead2 @both /thead1 +2:tmaintip'
$ hg log -G
o 11 a19bfa7e7328: r11 both
|
o 10 8b6bad1512e1: r10 both
|
o 9 025829e08038: r9 both
|\
| o 8 d8f638ac69e9: r8 name2
| |
| o 7 b6b4d315a2ac: r7 name2
| |
| o 6 6c6f5d5f3c11: r6 name2
| |
| o 5 70314b29987d: r5 name2
| |
o | 4 e71dbbc70e03: r4 name1
| |
o | 3 2c8d5d5ec612: r3 name1
| |
o | 2 a7892891da29: r2 name1
|/
o 1 0019a3b924fd: r1
|
o 0 d57206cc072a: r0
$ cd ..
$ tstart main
Full clone:
$ hg clone main full
updating to branch default
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd full
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg pull $remote
pulling from http://localhost:$HGPORT/
searching for changes
no changes found
$ hg push $remote
pushing to http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ cd ..
Local is empty:
$ cd empty1
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
0 d57206cc072a: r0
1 0019a3b924fd: r1
2 a7892891da29: r2 name1
3 2c8d5d5ec612: r3 name1
4 e71dbbc70e03: r4 name1
5 70314b29987d: r5 name2
6 6c6f5d5f3c11: r6 name2
7 b6b4d315a2ac: r7 name2
8 d8f638ac69e9: r8 name2
9 025829e08038: r9 both
10 8b6bad1512e1: r10 both
11 a19bfa7e7328: r11 both
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
no changes found
[1]
$ hg push $remote
pushing to http://localhost:$HGPORT/
no changes found
[1]
$ hg pull $remote
pulling from http://localhost:$HGPORT/
requesting all changes
adding changesets
adding manifests
adding file changes
added 12 changesets with 24 changes to 2 files
new changesets d57206cc072a:a19bfa7e7328
(run 'hg update' to get a working copy)
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ cd ..
Local is subset:
$ hg clone main subset --rev name2 ; cd subset
adding changesets
adding manifests
adding file changes
added 6 changesets with 12 changes to 2 files
new changesets d57206cc072a:d8f638ac69e9
updating to branch name2
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
6 a7892891da29: r2 name1
7 2c8d5d5ec612: r3 name1
8 e71dbbc70e03: r4 name1
9 025829e08038: r9 both
10 8b6bad1512e1: r10 both
11 a19bfa7e7328: r11 both
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg push $remote
pushing to http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg pull $remote
pulling from http://localhost:$HGPORT/
searching for changes
adding changesets
adding manifests
adding file changes
added 6 changesets with 12 changes to 2 files
new changesets a7892891da29:a19bfa7e7328
(run 'hg update' to get a working copy)
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ cd ..
$ tstop
Remote is empty:
$ tstart empty2
$ cd main
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
0 d57206cc072a: r0
1 0019a3b924fd: r1
2 a7892891da29: r2 name1
3 2c8d5d5ec612: r3 name1
4 e71dbbc70e03: r4 name1
5 70314b29987d: r5 name2
6 6c6f5d5f3c11: r6 name2
7 b6b4d315a2ac: r7 name2
8 d8f638ac69e9: r8 name2
9 025829e08038: r9 both
10 8b6bad1512e1: r10 both
11 a19bfa7e7328: r11 both
$ hg pull $remote
pulling from http://localhost:$HGPORT/
searching for changes
no changes found
$ hg push $remote
pushing to http://localhost:$HGPORT/
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 12 changesets with 24 changes to 2 files
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ cd ..
$ tstop
Local is superset:
$ hg clone main subset2 --rev name2
adding changesets
adding manifests
adding file changes
added 6 changesets with 12 changes to 2 files
new changesets d57206cc072a:d8f638ac69e9
updating to branch name2
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ tstart subset2
$ cd main
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
2 a7892891da29: r2 name1
3 2c8d5d5ec612: r3 name1
4 e71dbbc70e03: r4 name1
9 025829e08038: r9 both
10 8b6bad1512e1: r10 both
11 a19bfa7e7328: r11 both
$ hg pull $remote
pulling from http://localhost:$HGPORT/
searching for changes
no changes found
$ hg push $remote
pushing to http://localhost:$HGPORT/
searching for changes
abort: push creates new remote branches: both, name1!
(use 'hg push --new-branch' to create new remote branches)
[255]
$ hg push $remote --new-branch
pushing to http://localhost:$HGPORT/
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 6 changesets with 12 changes to 2 files
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ cd ..
$ tstop
Partial pull:
$ tstart main
$ hg clone $remote partial --rev name2
adding changesets
adding manifests
adding file changes
added 6 changesets with 12 changes to 2 files
new changesets d57206cc072a:d8f638ac69e9
updating to branch name2
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd partial
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
6 a7892891da29: r2 name1
7 2c8d5d5ec612: r3 name1
8 e71dbbc70e03: r4 name1
9 025829e08038: r9 both
10 8b6bad1512e1: r10 both
11 a19bfa7e7328: r11 both
$ hg incoming $remote --rev name1
comparing with http://localhost:$HGPORT/
searching for changes
6 a7892891da29: r2 name1
7 2c8d5d5ec612: r3 name1
8 e71dbbc70e03: r4 name1
$ hg pull $remote --rev name1
pulling from http://localhost:$HGPORT/
searching for changes
adding changesets
adding manifests
adding file changes
added 3 changesets with 6 changes to 2 files (+1 heads)
new changesets a7892891da29:e71dbbc70e03
(run 'hg heads' to see heads)
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
9 025829e08038: r9 both
10 8b6bad1512e1: r10 both
11 a19bfa7e7328: r11 both
$ cd ..
$ tstop
Both have new stuff in new named branches:
$ hg clone main repo1a --rev name1 -q
$ hg clone repo1a repo1b -q
$ hg clone main repo2a --rev name2 -q
$ hg clone repo2a repo2b -q
$ tstart repo1a
$ cd repo2a
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
6 a7892891da29: r2 name1
7 2c8d5d5ec612: r3 name1
8 e71dbbc70e03: r4 name1
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
2 70314b29987d: r5 name2
3 6c6f5d5f3c11: r6 name2
4 b6b4d315a2ac: r7 name2
5 d8f638ac69e9: r8 name2
$ hg push $remote --new-branch
pushing to http://localhost:$HGPORT/
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 4 changesets with 8 changes to 2 files (+1 heads)
$ hg pull $remote
pulling from http://localhost:$HGPORT/
searching for changes
adding changesets
adding manifests
adding file changes
added 3 changesets with 6 changes to 2 files (+1 heads)
new changesets a7892891da29:e71dbbc70e03
(run 'hg heads' to see heads)
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ cd ..
$ tstop
$ tstart repo1b
$ cd repo2b
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
6 a7892891da29: r2 name1
7 2c8d5d5ec612: r3 name1
8 e71dbbc70e03: r4 name1
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
2 70314b29987d: r5 name2
3 6c6f5d5f3c11: r6 name2
4 b6b4d315a2ac: r7 name2
5 d8f638ac69e9: r8 name2
$ hg pull $remote
pulling from http://localhost:$HGPORT/
searching for changes
adding changesets
adding manifests
adding file changes
added 3 changesets with 6 changes to 2 files (+1 heads)
new changesets a7892891da29:e71dbbc70e03
(run 'hg heads' to see heads)
$ hg push $remote --new-branch
pushing to http://localhost:$HGPORT/
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 4 changesets with 8 changes to 2 files (+1 heads)
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ cd ..
$ tstop
Both have new stuff in existing named branches:
$ rm -r repo1a repo1b repo2a repo2b
$ hg clone main repo1a --rev 3 --rev 8 -q
$ hg clone repo1a repo1b -q
$ hg clone main repo2a --rev 4 --rev 7 -q
$ hg clone repo2a repo2b -q
$ tstart repo1a
$ cd repo2a
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
8 d8f638ac69e9: r8 name2
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
4 e71dbbc70e03: r4 name1
$ hg push $remote --new-branch
pushing to http://localhost:$HGPORT/
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 1 changesets with 2 changes to 2 files
$ hg pull $remote
pulling from http://localhost:$HGPORT/
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 2 changes to 2 files
new changesets d8f638ac69e9
(run 'hg update' to get a working copy)
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ cd ..
$ tstop
$ tstart repo1b
$ cd repo2b
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
8 d8f638ac69e9: r8 name2
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
4 e71dbbc70e03: r4 name1
$ hg pull $remote
pulling from http://localhost:$HGPORT/
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 2 changes to 2 files
new changesets d8f638ac69e9
(run 'hg update' to get a working copy)
$ hg push $remote --new-branch
pushing to http://localhost:$HGPORT/
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 1 changesets with 2 changes to 2 files
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ cd ..
#if zstd
$ tstop show
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=branches HTTP/1.1" 200 - x-hgarg-1:nodes=d8f638ac69e9ae8dea4f09f11d696546a912d961 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=between HTTP/1.1" 200 - x-hgarg-1:pairs=d8f638ac69e9ae8dea4f09f11d696546a912d961-d57206cc072a18317c1e381fb60aa31bd3401785 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=changegroupsubset HTTP/1.1" 200 - x-hgarg-1:bases=d8f638ac69e9ae8dea4f09f11d696546a912d961&heads=d8f638ac69e9ae8dea4f09f11d696546a912d961 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=branches HTTP/1.1" 200 - x-hgarg-1:nodes=d8f638ac69e9ae8dea4f09f11d696546a912d961 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=between HTTP/1.1" 200 - x-hgarg-1:pairs=d8f638ac69e9ae8dea4f09f11d696546a912d961-d57206cc072a18317c1e381fb60aa31bd3401785 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=branches HTTP/1.1" 200 - x-hgarg-1:nodes=d8f638ac69e9ae8dea4f09f11d696546a912d961 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=between HTTP/1.1" 200 - x-hgarg-1:pairs=d8f638ac69e9ae8dea4f09f11d696546a912d961-d57206cc072a18317c1e381fb60aa31bd3401785 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=changegroupsubset HTTP/1.1" 200 - x-hgarg-1:bases=d8f638ac69e9ae8dea4f09f11d696546a912d961&heads=d8f638ac69e9ae8dea4f09f11d696546a912d961+2c8d5d5ec612be65cdfdeac78b7662ab1696324a x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=branchmap HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"POST /?cmd=unbundle HTTP/1.1" 200 - x-hgarg-1:heads=686173686564+1827a5bb63e602382eb89dd58f2ac9f3b007ad91* (glob)
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
#else
$ tstop show
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=branches HTTP/1.1" 200 - x-hgarg-1:nodes=d8f638ac69e9ae8dea4f09f11d696546a912d961 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=between HTTP/1.1" 200 - x-hgarg-1:pairs=d8f638ac69e9ae8dea4f09f11d696546a912d961-d57206cc072a18317c1e381fb60aa31bd3401785 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=changegroupsubset HTTP/1.1" 200 - x-hgarg-1:bases=d8f638ac69e9ae8dea4f09f11d696546a912d961&heads=d8f638ac69e9ae8dea4f09f11d696546a912d961 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=branches HTTP/1.1" 200 - x-hgarg-1:nodes=d8f638ac69e9ae8dea4f09f11d696546a912d961 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=between HTTP/1.1" 200 - x-hgarg-1:pairs=d8f638ac69e9ae8dea4f09f11d696546a912d961-d57206cc072a18317c1e381fb60aa31bd3401785 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=branches HTTP/1.1" 200 - x-hgarg-1:nodes=d8f638ac69e9ae8dea4f09f11d696546a912d961 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=between HTTP/1.1" 200 - x-hgarg-1:pairs=d8f638ac69e9ae8dea4f09f11d696546a912d961-d57206cc072a18317c1e381fb60aa31bd3401785 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=changegroupsubset HTTP/1.1" 200 - x-hgarg-1:bases=d8f638ac69e9ae8dea4f09f11d696546a912d961&heads=d8f638ac69e9ae8dea4f09f11d696546a912d961+2c8d5d5ec612be65cdfdeac78b7662ab1696324a x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=branchmap HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"POST /?cmd=unbundle HTTP/1.1" 200 - x-hgarg-1:heads=686173686564+1827a5bb63e602382eb89dd58f2ac9f3b007ad91* (glob)
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
#endif