##// END OF EJS Templates
rebase: use dirstateguard instead of dirstate.invalidate...
rebase: use dirstateguard instead of dirstate.invalidate Before this patch, "rebase.concludenode()" uses "dirstate.invalidate()" as a kind of "restore .hg/dirstate to the original status" during a failure. But it just discards changes in memory, and doesn't actually restore ".hg/dirstate". Then, it can't work as expected, if "dirstate.write()" is executed while processing. This patch uses "dirstateguard" instead of "dirstate.invalidate()" to restore ".hg/dirstate" during a failure even if "dirstate.write()" is executed before a failure. This patch also removes "beginparentchage()" and "endparentchange()", because "dirstateguard" makes them useless. This is a part of preparations to fix the issue that the recent (in memory) dirstate isn't visible to external processes (e.g. "precommit" hook). After this patch, the changed dirstate becomes visible to external "precommit" hooks during "hg rebase" in "test-largefiles-misc.t", because "dirstateguard()" writes it out. But this content isn't yet correct, because: - "normal3" should be marked as "A"(dded) at committing It is newly added in the changeset being rebased. - but it is marked as "M"(odified) The result of "repo.setparents()" after "dirstateguard()" isn't yet written out before "precommit". So, merging is still in progress for "hg status" in it. This causes marking the file newly added on "other" branch as "A". This will be fixed by subsequent patch.

File last commit:

r24998:c8a97fa7 default
r24998:c8a97fa7 default
Show More
test-largefiles-misc.t
1084 lines | 27.9 KiB | text/troff | Tads3Lexer
/ tests / test-largefiles-misc.t
This file contains testcases that tend to be related to special cases or less
common commands affecting largefile.
Each sections should be independent of each others.
$ USERCACHE="$TESTTMP/cache"; export USERCACHE
$ mkdir "${USERCACHE}"
$ cat >> $HGRCPATH <<EOF
> [extensions]
> largefiles=
> purge=
> rebase=
> transplant=
> [phases]
> publish=False
> [largefiles]
> minsize=2
> patterns=glob:**.dat
> usercache=${USERCACHE}
> [hooks]
> precommit=sh -c "echo \\"Invoking status precommit hook\\"; hg status"
> EOF
Test copies and moves from a directory other than root (issue3516)
=========================================================================
$ hg init lf_cpmv
$ cd lf_cpmv
$ mkdir dira
$ mkdir dira/dirb
$ touch dira/dirb/largefile
$ hg add --large dira/dirb/largefile
$ hg commit -m "added"
Invoking status precommit hook
A dira/dirb/largefile
$ cd dira
$ hg cp dirb/largefile foo/largefile
TODO: Ideally, this should mention the largefile, not the standin
$ hg log -T '{rev}\n' --stat 'set:clean()'
0
.hglf/dira/dirb/largefile | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
$ hg ci -m "deep copy"
Invoking status precommit hook
A dira/foo/largefile
$ find . | sort
.
./dirb
./dirb/largefile
./foo
./foo/largefile
$ hg mv foo/largefile baz/largefile
$ hg ci -m "moved"
Invoking status precommit hook
A dira/baz/largefile
R dira/foo/largefile
$ find . | sort
.
./baz
./baz/largefile
./dirb
./dirb/largefile
$ cd ..
$ hg mv dira dirc
moving .hglf/dira/baz/largefile to .hglf/dirc/baz/largefile (glob)
moving .hglf/dira/dirb/largefile to .hglf/dirc/dirb/largefile (glob)
$ find * | sort
dirc
dirc/baz
dirc/baz/largefile
dirc/dirb
dirc/dirb/largefile
$ hg clone -q . ../fetch
$ hg --config extensions.fetch= fetch ../fetch
abort: uncommitted changes
[255]
$ hg up -qC
$ cd ..
Clone a local repository owned by another user
===================================================
#if unix-permissions
We have to simulate that here by setting $HOME and removing write permissions
$ ORIGHOME="$HOME"
$ mkdir alice
$ HOME="`pwd`/alice"
$ cd alice
$ hg init pubrepo
$ cd pubrepo
$ dd if=/dev/zero bs=1k count=11k > a-large-file 2> /dev/null
$ hg add --large a-large-file
$ hg commit -m "Add a large file"
Invoking status precommit hook
A a-large-file
$ cd ..
$ chmod -R a-w pubrepo
$ cd ..
$ mkdir bob
$ HOME="`pwd`/bob"
$ cd bob
$ hg clone --pull ../alice/pubrepo pubrepo
requesting all changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
updating to branch default
getting changed largefiles
1 largefiles updated, 0 removed
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd ..
$ chmod -R u+w alice/pubrepo
$ HOME="$ORIGHOME"
#endif
Symlink to a large largefile should behave the same as a symlink to a normal file
=====================================================================================
#if symlink
$ hg init largesymlink
$ cd largesymlink
$ dd if=/dev/zero bs=1k count=10k of=largefile 2>/dev/null
$ hg add --large largefile
$ hg commit -m "commit a large file"
Invoking status precommit hook
A largefile
$ ln -s largefile largelink
$ hg add largelink
$ hg commit -m "commit a large symlink"
Invoking status precommit hook
A largelink
$ rm -f largelink
$ hg up >/dev/null
$ test -f largelink
[1]
$ test -L largelink
[1]
$ rm -f largelink # make next part of the test independent of the previous
$ hg up -C >/dev/null
$ test -f largelink
$ test -L largelink
$ cd ..
#endif
test for pattern matching on 'hg status':
==============================================
to boost performance, largefiles checks whether specified patterns are
related to largefiles in working directory (NOT to STANDIN) or not.
$ hg init statusmatch
$ cd statusmatch
$ mkdir -p a/b/c/d
$ echo normal > a/b/c/d/e.normal.txt
$ hg add a/b/c/d/e.normal.txt
$ echo large > a/b/c/d/e.large.txt
$ hg add --large a/b/c/d/e.large.txt
$ mkdir -p a/b/c/x
$ echo normal > a/b/c/x/y.normal.txt
$ hg add a/b/c/x/y.normal.txt
$ hg commit -m 'add files'
Invoking status precommit hook
A a/b/c/d/e.large.txt
A a/b/c/d/e.normal.txt
A a/b/c/x/y.normal.txt
(1) no pattern: no performance boost
$ hg status -A
C a/b/c/d/e.large.txt
C a/b/c/d/e.normal.txt
C a/b/c/x/y.normal.txt
(2) pattern not related to largefiles: performance boost
$ hg status -A a/b/c/x
C a/b/c/x/y.normal.txt
(3) pattern related to largefiles: no performance boost
$ hg status -A a/b/c/d
C a/b/c/d/e.large.txt
C a/b/c/d/e.normal.txt
(4) pattern related to STANDIN (not to largefiles): performance boost
$ hg status -A .hglf/a
C .hglf/a/b/c/d/e.large.txt
(5) mixed case: no performance boost
$ hg status -A a/b/c/x a/b/c/d
C a/b/c/d/e.large.txt
C a/b/c/d/e.normal.txt
C a/b/c/x/y.normal.txt
verify that largefiles doesn't break filesets
$ hg log --rev . --exclude "set:binary()"
changeset: 0:41bd42f10efa
tag: tip
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: add files
verify that large files in subrepos handled properly
$ hg init subrepo
$ echo "subrepo = subrepo" > .hgsub
$ hg add .hgsub
$ hg ci -m "add subrepo"
Invoking status precommit hook
A .hgsub
? .hgsubstate
$ echo "rev 1" > subrepo/large.txt
$ hg add --large subrepo/large.txt
$ hg sum
parent: 1:8ee150ea2e9c tip
add subrepo
branch: default
commit: 1 subrepos
update: (current)
$ hg st
$ hg st -S
A subrepo/large.txt
$ hg ci -S -m "commit top repo"
committing subrepository subrepo
Invoking status precommit hook
A large.txt
Invoking status precommit hook
M .hgsubstate
# No differences
$ hg st -S
$ hg sum
parent: 2:ce4cd0c527a6 tip
commit top repo
branch: default
commit: (clean)
update: (current)
$ echo "rev 2" > subrepo/large.txt
$ hg st -S
M subrepo/large.txt
$ hg sum
parent: 2:ce4cd0c527a6 tip
commit top repo
branch: default
commit: 1 subrepos
update: (current)
$ hg ci -m "this commit should fail without -S"
abort: uncommitted changes in subrepository 'subrepo'
(use --subrepos for recursive commit)
[255]
Add a normal file to the subrepo, then test archiving
$ echo 'normal file' > subrepo/normal.txt
$ touch large.dat
$ mv subrepo/large.txt subrepo/renamed-large.txt
$ hg addremove -S --dry-run
adding large.dat as a largefile
removing subrepo/large.txt
adding subrepo/normal.txt
adding subrepo/renamed-large.txt
$ hg status -S
! subrepo/large.txt
? large.dat
? subrepo/normal.txt
? subrepo/renamed-large.txt
$ hg addremove --dry-run subrepo
removing subrepo/large.txt (glob)
adding subrepo/normal.txt (glob)
adding subrepo/renamed-large.txt (glob)
$ hg status -S
! subrepo/large.txt
? large.dat
? subrepo/normal.txt
? subrepo/renamed-large.txt
$ cd ..
$ hg -R statusmatch addremove --dry-run statusmatch/subrepo
removing statusmatch/subrepo/large.txt (glob)
adding statusmatch/subrepo/normal.txt (glob)
adding statusmatch/subrepo/renamed-large.txt (glob)
$ hg -R statusmatch status -S
! subrepo/large.txt
? large.dat
? subrepo/normal.txt
? subrepo/renamed-large.txt
$ hg -R statusmatch addremove --dry-run -S
adding large.dat as a largefile
removing subrepo/large.txt
adding subrepo/normal.txt
adding subrepo/renamed-large.txt
$ cd statusmatch
$ mv subrepo/renamed-large.txt subrepo/large.txt
$ hg addremove subrepo
adding subrepo/normal.txt (glob)
$ hg forget subrepo/normal.txt
$ hg addremove -S
adding large.dat as a largefile
adding subrepo/normal.txt
$ rm large.dat
$ hg addremove subrepo
$ hg addremove -S
removing large.dat
Lock in subrepo, otherwise the change isn't archived
$ hg ci -S -m "add normal file to top level"
committing subrepository subrepo
Invoking status precommit hook
M large.txt
A normal.txt
Invoking status precommit hook
M .hgsubstate
$ hg archive -S ../lf_subrepo_archive
$ find ../lf_subrepo_archive | sort
../lf_subrepo_archive
../lf_subrepo_archive/.hg_archival.txt
../lf_subrepo_archive/.hgsub
../lf_subrepo_archive/.hgsubstate
../lf_subrepo_archive/a
../lf_subrepo_archive/a/b
../lf_subrepo_archive/a/b/c
../lf_subrepo_archive/a/b/c/d
../lf_subrepo_archive/a/b/c/d/e.large.txt
../lf_subrepo_archive/a/b/c/d/e.normal.txt
../lf_subrepo_archive/a/b/c/x
../lf_subrepo_archive/a/b/c/x/y.normal.txt
../lf_subrepo_archive/subrepo
../lf_subrepo_archive/subrepo/large.txt
../lf_subrepo_archive/subrepo/normal.txt
$ cat ../lf_subrepo_archive/.hg_archival.txt
repo: 41bd42f10efa43698cc02052ea0977771cba506d
node: d56a95e6522858bc08a724c4fe2bdee066d1c30b
branch: default
latesttag: null
latesttagdistance: 4
changessincelatesttag: 4
Test update with subrepos.
$ hg update 0
getting changed largefiles
0 largefiles updated, 1 removed
0 files updated, 0 files merged, 2 files removed, 0 files unresolved
$ hg status -S
$ hg update tip
getting changed largefiles
1 largefiles updated, 0 removed
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg status -S
# modify a large file
$ echo "modified" > subrepo/large.txt
$ hg st -S
M subrepo/large.txt
# update -C should revert the change.
$ hg update -C
getting changed largefiles
1 largefiles updated, 0 removed
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg status -S
$ hg forget -v subrepo/large.txt
removing subrepo/large.txt (glob)
Test reverting a forgotten file
$ hg revert -R subrepo subrepo/large.txt
$ hg status -SA subrepo/large.txt
C subrepo/large.txt
$ hg rm -v subrepo/large.txt
removing subrepo/large.txt (glob)
$ hg revert -R subrepo subrepo/large.txt
$ rm subrepo/large.txt
$ hg addremove -S
removing subrepo/large.txt
$ hg st -S
R subrepo/large.txt
Test archiving a revision that references a subrepo that is not yet
cloned (see test-subrepo-recursion.t):
$ hg clone -U . ../empty
$ cd ../empty
$ hg archive --subrepos -r tip ../archive.tar.gz
cloning subrepo subrepo from $TESTTMP/statusmatch/subrepo
$ cd ..
Test addremove, forget and others
==============================================
Test that addremove picks up largefiles prior to the initial commit (issue3541)
$ hg init addrm2
$ cd addrm2
$ touch large.dat
$ touch large2.dat
$ touch normal
$ hg add --large large.dat
$ hg addremove -v
adding large2.dat as a largefile
adding normal
Test that forgetting all largefiles reverts to islfilesrepo() == False
(addremove will add *.dat as normal files now)
$ hg forget large.dat
$ hg forget large2.dat
$ hg addremove -v
adding large.dat
adding large2.dat
Test commit's addremove option prior to the first commit
$ hg forget large.dat
$ hg forget large2.dat
$ hg add --large large.dat
$ hg ci -Am "commit"
adding large2.dat as a largefile
Invoking status precommit hook
A large.dat
A large2.dat
A normal
$ find .hglf | sort
.hglf
.hglf/large.dat
.hglf/large2.dat
Test actions on largefiles using relative paths from subdir
$ mkdir sub
$ cd sub
$ echo anotherlarge > anotherlarge
$ hg add --large anotherlarge
$ hg st
A sub/anotherlarge
$ hg st anotherlarge
A anotherlarge
$ hg commit -m anotherlarge anotherlarge
Invoking status precommit hook
A sub/anotherlarge
$ hg log anotherlarge
changeset: 1:9627a577c5e9
tag: tip
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: anotherlarge
$ hg --debug log -T '{rev}: {desc}\n' ../sub/anotherlarge
updated patterns: ['../.hglf/sub/../sub/anotherlarge', '../sub/anotherlarge']
1: anotherlarge
$ hg log -G anotherlarge
@ changeset: 1:9627a577c5e9
| tag: tip
| user: test
| date: Thu Jan 01 00:00:00 1970 +0000
| summary: anotherlarge
|
$ hg log glob:another*
changeset: 1:9627a577c5e9
tag: tip
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: anotherlarge
$ hg --debug log -T '{rev}: {desc}\n' -G glob:another*
updated patterns: ['glob:../.hglf/sub/another*', 'glob:another*']
@ 1: anotherlarge
|
#if no-msys
$ hg --debug log -T '{rev}: {desc}\n' 'glob:../.hglf/sub/another*' # no-msys
updated patterns: ['glob:../.hglf/sub/another*']
1: anotherlarge
$ hg --debug log -G -T '{rev}: {desc}\n' 'glob:../.hglf/sub/another*' # no-msys
updated patterns: ['glob:../.hglf/sub/another*']
@ 1: anotherlarge
|
#endif
$ echo more >> anotherlarge
$ hg st .
M anotherlarge
$ hg cat anotherlarge
anotherlarge
$ hg revert anotherlarge
$ hg st
? sub/anotherlarge.orig
$ cd ..
Test glob logging from the root dir
$ hg log glob:**another*
changeset: 1:9627a577c5e9
tag: tip
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: anotherlarge
$ hg log -G glob:**another*
@ changeset: 1:9627a577c5e9
| tag: tip
| user: test
| date: Thu Jan 01 00:00:00 1970 +0000
| summary: anotherlarge
|
$ cd ..
Log from outer space
$ hg --debug log -R addrm2 -T '{rev}: {desc}\n' 'addrm2/sub/anotherlarge'
updated patterns: ['addrm2/.hglf/sub/anotherlarge', 'addrm2/sub/anotherlarge']
1: anotherlarge
$ hg --debug log -R addrm2 -T '{rev}: {desc}\n' 'addrm2/.hglf/sub/anotherlarge'
updated patterns: ['addrm2/.hglf/sub/anotherlarge']
1: anotherlarge
Check error message while exchange
=========================================================
issue3651: summary/outgoing with largefiles shows "no remote repo"
unexpectedly
$ mkdir issue3651
$ cd issue3651
$ hg init src
$ echo a > src/a
$ hg -R src add --large src/a
$ hg -R src commit -m '#0'
Invoking status precommit hook
A a
check messages when no remote repository is specified:
"no remote repo" route for "hg outgoing --large" is not tested here,
because it can't be reproduced easily.
$ hg init clone1
$ hg -R clone1 -q pull src
$ hg -R clone1 -q update
$ hg -R clone1 paths | grep default
[1]
$ hg -R clone1 summary --large
parent: 0:fc0bd45326d3 tip
#0
branch: default
commit: (clean)
update: (current)
largefiles: (no remote repo)
check messages when there is no files to upload:
$ hg -q clone src clone2
$ hg -R clone2 paths | grep default
default = $TESTTMP/issue3651/src (glob)
$ hg -R clone2 summary --large
parent: 0:fc0bd45326d3 tip
#0
branch: default
commit: (clean)
update: (current)
largefiles: (no files to upload)
$ hg -R clone2 outgoing --large
comparing with $TESTTMP/issue3651/src (glob)
searching for changes
no changes found
largefiles: no files to upload
[1]
$ hg -R clone2 outgoing --large --graph --template "{rev}"
comparing with $TESTTMP/issue3651/src (glob)
searching for changes
no changes found
largefiles: no files to upload
check messages when there are files to upload:
$ echo b > clone2/b
$ hg -R clone2 add --large clone2/b
$ hg -R clone2 commit -m '#1'
Invoking status precommit hook
A b
$ hg -R clone2 summary --large
parent: 1:1acbe71ce432 tip
#1
branch: default
commit: (clean)
update: (current)
largefiles: 1 entities for 1 files to upload
$ hg -R clone2 outgoing --large
comparing with $TESTTMP/issue3651/src (glob)
searching for changes
changeset: 1:1acbe71ce432
tag: tip
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: #1
largefiles to upload (1 entities):
b
$ hg -R clone2 outgoing --large --graph --template "{rev}"
comparing with $TESTTMP/issue3651/src (glob)
searching for changes
@ 1
largefiles to upload (1 entities):
b
$ cp clone2/b clone2/b1
$ cp clone2/b clone2/b2
$ hg -R clone2 add --large clone2/b1 clone2/b2
$ hg -R clone2 commit -m '#2: add largefiles referring same entity'
Invoking status precommit hook
A b1
A b2
$ hg -R clone2 summary --large
parent: 2:6095d0695d70 tip
#2: add largefiles referring same entity
branch: default
commit: (clean)
update: (current)
largefiles: 1 entities for 3 files to upload
$ hg -R clone2 outgoing --large -T "{rev}:{node|short}\n"
comparing with $TESTTMP/issue3651/src (glob)
searching for changes
1:1acbe71ce432
2:6095d0695d70
largefiles to upload (1 entities):
b
b1
b2
$ hg -R clone2 cat -r 1 clone2/.hglf/b
89e6c98d92887913cadf06b2adb97f26cde4849b
$ hg -R clone2 outgoing --large -T "{rev}:{node|short}\n" --debug
comparing with $TESTTMP/issue3651/src (glob)
query 1; heads
searching for changes
all remote heads known locally
1:1acbe71ce432
2:6095d0695d70
finding outgoing largefiles: 0/2 revision (0.00%)
finding outgoing largefiles: 1/2 revision (50.00%)
largefiles to upload (1 entities):
b
89e6c98d92887913cadf06b2adb97f26cde4849b
b1
89e6c98d92887913cadf06b2adb97f26cde4849b
b2
89e6c98d92887913cadf06b2adb97f26cde4849b
$ echo bbb > clone2/b
$ hg -R clone2 commit -m '#3: add new largefile entity as existing file'
Invoking status precommit hook
M b
$ echo bbbb > clone2/b
$ hg -R clone2 commit -m '#4: add new largefile entity as existing file'
Invoking status precommit hook
M b
$ cp clone2/b1 clone2/b
$ hg -R clone2 commit -m '#5: refer existing largefile entity again'
Invoking status precommit hook
M b
$ hg -R clone2 summary --large
parent: 5:036794ea641c tip
#5: refer existing largefile entity again
branch: default
commit: (clean)
update: (current)
largefiles: 3 entities for 3 files to upload
$ hg -R clone2 outgoing --large -T "{rev}:{node|short}\n"
comparing with $TESTTMP/issue3651/src (glob)
searching for changes
1:1acbe71ce432
2:6095d0695d70
3:7983dce246cc
4:233f12ada4ae
5:036794ea641c
largefiles to upload (3 entities):
b
b1
b2
$ hg -R clone2 cat -r 3 clone2/.hglf/b
c801c9cfe94400963fcb683246217d5db77f9a9a
$ hg -R clone2 cat -r 4 clone2/.hglf/b
13f9ed0898e315bf59dc2973fec52037b6f441a2
$ hg -R clone2 outgoing --large -T "{rev}:{node|short}\n" --debug
comparing with $TESTTMP/issue3651/src (glob)
query 1; heads
searching for changes
all remote heads known locally
1:1acbe71ce432
2:6095d0695d70
3:7983dce246cc
4:233f12ada4ae
5:036794ea641c
finding outgoing largefiles: 0/5 revision (0.00%)
finding outgoing largefiles: 1/5 revision (20.00%)
finding outgoing largefiles: 2/5 revision (40.00%)
finding outgoing largefiles: 3/5 revision (60.00%)
finding outgoing largefiles: 4/5 revision (80.00%)
largefiles to upload (3 entities):
b
13f9ed0898e315bf59dc2973fec52037b6f441a2
89e6c98d92887913cadf06b2adb97f26cde4849b
c801c9cfe94400963fcb683246217d5db77f9a9a
b1
89e6c98d92887913cadf06b2adb97f26cde4849b
b2
89e6c98d92887913cadf06b2adb97f26cde4849b
Pushing revision #1 causes uploading entity 89e6c98d9288, which is
shared also by largefiles b1, b2 in revision #2 and b in revision #5.
Then, entity 89e6c98d9288 is not treated as "outgoing entity" at "hg
summary" and "hg outgoing", even though files in outgoing revision #2
and #5 refer it.
$ hg -R clone2 push -r 1 -q
$ hg -R clone2 summary --large
parent: 5:036794ea641c tip
#5: refer existing largefile entity again
branch: default
commit: (clean)
update: (current)
largefiles: 2 entities for 1 files to upload
$ hg -R clone2 outgoing --large -T "{rev}:{node|short}\n"
comparing with $TESTTMP/issue3651/src (glob)
searching for changes
2:6095d0695d70
3:7983dce246cc
4:233f12ada4ae
5:036794ea641c
largefiles to upload (2 entities):
b
$ hg -R clone2 outgoing --large -T "{rev}:{node|short}\n" --debug
comparing with $TESTTMP/issue3651/src (glob)
query 1; heads
searching for changes
all remote heads known locally
2:6095d0695d70
3:7983dce246cc
4:233f12ada4ae
5:036794ea641c
finding outgoing largefiles: 0/4 revision (0.00%)
finding outgoing largefiles: 1/4 revision (25.00%)
finding outgoing largefiles: 2/4 revision (50.00%)
finding outgoing largefiles: 3/4 revision (75.00%)
largefiles to upload (2 entities):
b
13f9ed0898e315bf59dc2973fec52037b6f441a2
c801c9cfe94400963fcb683246217d5db77f9a9a
$ cd ..
merge action 'd' for 'local renamed directory to d2/g' which has no filename
==================================================================================
$ hg init merge-action
$ cd merge-action
$ touch l
$ hg add --large l
$ mkdir d1
$ touch d1/f
$ hg ci -Aqm0
Invoking status precommit hook
A d1/f
A l
$ echo > d1/f
$ touch d1/g
$ hg ci -Aqm1
Invoking status precommit hook
M d1/f
A d1/g
$ hg up -qr0
$ hg mv d1 d2
moving d1/f to d2/f (glob)
$ hg ci -qm2
Invoking status precommit hook
A d2/f
R d1/f
$ hg merge
merging d2/f and d1/f to d2/f
1 files updated, 1 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ cd ..
Merge conflicts:
=====================
$ hg init merge
$ cd merge
$ echo 0 > f-different
$ echo 0 > f-same
$ echo 0 > f-unchanged-1
$ echo 0 > f-unchanged-2
$ hg add --large *
$ hg ci -m0
Invoking status precommit hook
A f-different
A f-same
A f-unchanged-1
A f-unchanged-2
$ echo tmp1 > f-unchanged-1
$ echo tmp1 > f-unchanged-2
$ echo tmp1 > f-same
$ hg ci -m1
Invoking status precommit hook
M f-same
M f-unchanged-1
M f-unchanged-2
$ echo 2 > f-different
$ echo 0 > f-unchanged-1
$ echo 1 > f-unchanged-2
$ echo 1 > f-same
$ hg ci -m2
Invoking status precommit hook
M f-different
M f-same
M f-unchanged-1
M f-unchanged-2
$ hg up -qr0
$ echo tmp2 > f-unchanged-1
$ echo tmp2 > f-unchanged-2
$ echo tmp2 > f-same
$ hg ci -m3
Invoking status precommit hook
M f-same
M f-unchanged-1
M f-unchanged-2
created new head
$ echo 1 > f-different
$ echo 1 > f-unchanged-1
$ echo 0 > f-unchanged-2
$ echo 1 > f-same
$ hg ci -m4
Invoking status precommit hook
M f-different
M f-same
M f-unchanged-1
M f-unchanged-2
$ hg merge
largefile f-different has a merge conflict
ancestor was 09d2af8dd22201dd8d48e5dcfcaed281ff9422c7
keep (l)ocal e5fa44f2b31c1fb553b6021e7360d07d5d91ff5e or
take (o)ther 7448d8798a4380162d4b56f9b452e2f6f9e24e7a? l
getting changed largefiles
1 largefiles updated, 0 removed
0 files updated, 4 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ cat f-different
1
$ cat f-same
1
$ cat f-unchanged-1
1
$ cat f-unchanged-2
1
$ cd ..
Test largefile insulation (do not enabled a side effect
========================================================
Check whether "largefiles" feature is supported only in repositories
enabling largefiles extension.
$ mkdir individualenabling
$ cd individualenabling
$ hg init enabledlocally
$ echo large > enabledlocally/large
$ hg -R enabledlocally add --large enabledlocally/large
$ hg -R enabledlocally commit -m '#0'
Invoking status precommit hook
A large
$ hg init notenabledlocally
$ echo large > notenabledlocally/large
$ hg -R notenabledlocally add --large notenabledlocally/large
$ hg -R notenabledlocally commit -m '#0'
Invoking status precommit hook
A large
$ cat >> $HGRCPATH <<EOF
> [extensions]
> # disable globally
> largefiles=!
> EOF
$ cat >> enabledlocally/.hg/hgrc <<EOF
> [extensions]
> # enable locally
> largefiles=
> EOF
$ hg -R enabledlocally root
$TESTTMP/individualenabling/enabledlocally (glob)
$ hg -R notenabledlocally root
abort: repository requires features unknown to this Mercurial: largefiles!
(see http://mercurial.selenic.com/wiki/MissingRequirement for more information)
[255]
$ hg init push-dst
$ hg -R enabledlocally push push-dst
pushing to push-dst
abort: required features are not supported in the destination: largefiles
[255]
$ hg init pull-src
$ hg -R pull-src pull enabledlocally
pulling from enabledlocally
abort: required features are not supported in the destination: largefiles
[255]
$ hg clone enabledlocally clone-dst
abort: repository requires features unknown to this Mercurial: largefiles!
(see http://mercurial.selenic.com/wiki/MissingRequirement for more information)
[255]
$ test -d clone-dst
[1]
$ hg clone --pull enabledlocally clone-pull-dst
abort: required features are not supported in the destination: largefiles
[255]
$ test -d clone-pull-dst
[1]
#if serve
Test largefiles specific peer setup, when largefiles is enabled
locally (issue4109)
$ hg showconfig extensions | grep largefiles
extensions.largefiles=!
$ mkdir -p $TESTTMP/individualenabling/usercache
$ hg serve -R enabledlocally -d -p $HGPORT --pid-file hg.pid
$ cat hg.pid >> $DAEMON_PIDS
$ hg init pull-dst
$ cat > pull-dst/.hg/hgrc <<EOF
> [extensions]
> # enable locally
> largefiles=
> [largefiles]
> # ignore system cache to force largefiles specific wire proto access
> usercache=$TESTTMP/individualenabling/usercache
> EOF
$ hg -R pull-dst -q pull -u http://localhost:$HGPORT
$ "$TESTDIR/killdaemons.py" $DAEMON_PIDS
#endif
Test overridden functions work correctly even for repos disabling
largefiles (issue4547)
$ hg showconfig extensions | grep largefiles
extensions.largefiles=!
(test updating implied by clone)
$ hg init enabled-but-no-largefiles
$ echo normal1 > enabled-but-no-largefiles/normal1
$ hg -R enabled-but-no-largefiles add enabled-but-no-largefiles/normal1
$ hg -R enabled-but-no-largefiles commit -m '#0@enabled-but-no-largefiles'
Invoking status precommit hook
A normal1
$ cat >> enabled-but-no-largefiles/.hg/hgrc <<EOF
> [extensions]
> # enable locally
> largefiles=
> EOF
$ hg clone -q enabled-but-no-largefiles no-largefiles
(test rebasing implied by pull: precommit while rebasing unexpectedly
shows "normal3" as "?", because lfdirstate isn't yet written out at
that time)
$ echo normal2 > enabled-but-no-largefiles/normal2
$ hg -R enabled-but-no-largefiles add enabled-but-no-largefiles/normal2
$ hg -R enabled-but-no-largefiles commit -m '#1@enabled-but-no-largefiles'
Invoking status precommit hook
A normal2
$ echo normal3 > no-largefiles/normal3
$ hg -R no-largefiles add no-largefiles/normal3
$ hg -R no-largefiles commit -m '#1@no-largefiles'
Invoking status precommit hook
A normal3
$ hg -R no-largefiles -q pull --rebase
Invoking status precommit hook
M normal3
(test reverting)
$ hg init subrepo-root
$ cat >> subrepo-root/.hg/hgrc <<EOF
> [extensions]
> # enable locally
> largefiles=
> EOF
$ echo large > subrepo-root/large
$ hg -R subrepo-root add --large subrepo-root/large
$ hg clone -q no-largefiles subrepo-root/no-largefiles
$ cat > subrepo-root/.hgsub <<EOF
> no-largefiles = no-largefiles
> EOF
$ hg -R subrepo-root add subrepo-root/.hgsub
$ hg -R subrepo-root commit -m '#0'
Invoking status precommit hook
A .hgsub
A large
? .hgsubstate
$ echo dirty >> subrepo-root/large
$ echo dirty >> subrepo-root/no-largefiles/normal1
$ hg -R subrepo-root status -S
M large
M no-largefiles/normal1
$ hg -R subrepo-root revert --all
reverting subrepo-root/.hglf/large (glob)
reverting subrepo no-largefiles
reverting subrepo-root/no-largefiles/normal1 (glob)
$ cd ..
Test "pull --rebase" when rebase is enabled before largefiles (issue3861)
=========================================================================
$ hg showconfig extensions | grep largefiles
extensions.largefiles=!
$ mkdir issue3861
$ cd issue3861
$ hg init src
$ hg clone -q src dst
$ echo a > src/a
$ hg -R src commit -Aqm "#0"
Invoking status precommit hook
A a
$ cat >> dst/.hg/hgrc <<EOF
> [extensions]
> largefiles=
> EOF
$ hg -R dst pull --rebase
pulling from $TESTTMP/issue3861/src (glob)
requesting all changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
nothing to rebase - working directory parent is already an ancestor of destination bf5e395ced2c
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd ..