##// END OF EJS Templates
upstream » mercurial-mirror
RSS

Clone from https://www.mercurial-scm.org/repo/hg-all

util: optimize cost auditing on insert...
util: optimize cost auditing on insert Calling popoldest() on insert with cost auditing enabled introduces significant overhead. The primary reason for this overhead is that popoldest() needs to walk the linked list to find the first non-empty node. When we call popoldest() within a loop, this can become quadratic. The performance impact is more pronounced on caches with large capacities. This commit effectively inlines the popoldest() call into _enforcecostlimit(). By doing so, we only do the backwards walk to find the first empty node once. However, we still may still perform this work on insert when the cache is near cost capacity. So this is only a partial performance win. $ hg perflrucachedict --size 4 --gets 1000000 --sets 1000000 --mixed 1000000 --costlimit 100 ! gets w/ cost limit ! wall 0.598737 comb 0.590000 user 0.590000 sys 0.000000 (best of 17) ! inserts w/ cost limit ! wall 1.694282 comb 1.700000 user 1.700000 sys 0.000000 (best of 6) ! wall 1.659181 comb 1.650000 user 1.650000 sys 0.000000 (best of 7) ! mixed w/ cost limit ! wall 1.157655 comb 1.150000 user 1.150000 sys 0.000000 (best of 9) ! wall 1.139955 comb 1.140000 user 1.140000 sys 0.000000 (best of 9) $ hg perflrucachedict --size 1000 --gets 1000000 --sets 1000000 --mixed 1000000 --costlimit 10000 ! gets w/ cost limit ! wall 0.598526 comb 0.600000 user 0.600000 sys 0.000000 (best of 17) ! wall 0.601993 comb 0.600000 user 0.600000 sys 0.000000 (best of 17) ! inserts w/ cost limit ! wall 37.838315 comb 37.840000 user 37.840000 sys 0.000000 (best of 3) ! wall 25.105273 comb 25.080000 user 25.080000 sys 0.000000 (best of 3) ! mixed w/ cost limit ! wall 18.060198 comb 18.060000 user 18.060000 sys 0.000000 (best of 3) ! wall 12.104470 comb 12.070000 user 12.070000 sys 0.000000 (best of 3) $ hg perflrucachedict --size 1000 --gets 1000000 --sets 1000000 --mixed 1000000 --costlimit 10000 --mixedgetfreq 90 ! gets w/ cost limit ! wall 0.600024 comb 0.600000 user 0.600000 sys 0.000000 (best of 17) ! wall 0.614439 comb 0.620000 user 0.620000 sys 0.000000 (best of 17) ! inserts w/ cost limit ! wall 37.154547 comb 37.120000 user 37.120000 sys 0.000000 (best of 3) ! wall 25.963028 comb 25.960000 user 25.960000 sys 0.000000 (best of 3) ! mixed w/ cost limit ! wall 4.381602 comb 4.380000 user 4.370000 sys 0.010000 (best of 3) ! wall 3.174256 comb 3.170000 user 3.170000 sys 0.000000 (best of 4) Differential Revision: https://phab.mercurial-scm.org/D4504
Matt Harbison - - Load All Authors

File last commit:

r34950:ff178743 stable
r39605:cc23c09b default
Show More
phases.txt
100 lines | 3.0 KiB | text/plain | TextLexer
/ mercurial / help / phases.txt
History | Annotation | Raw |Copy content |Copy permalink
What are phases?
================
Phases are a system for tracking which changesets have been or should
be shared. This helps prevent common mistakes when modifying history
(for instance, with the mq or rebase extensions).
Each changeset in a repository is in one of the following phases:
- public : changeset is visible on a public server
- draft : changeset is not yet published
- secret : changeset should not be pushed, pulled, or cloned
These phases are ordered (public < draft < secret) and no changeset
can be in a lower phase than its ancestors. For instance, if a
changeset is public, all its ancestors are also public. Lastly,
changeset phases should only be changed towards the public phase.
How are phases managed?
=======================
For the most part, phases should work transparently. By default, a
changeset is created in the draft phase and is moved into the public
phase when it is pushed to another repository.
Once changesets become public, extensions like mq and rebase will
refuse to operate on them to prevent creating duplicate changesets.
Phases can also be manually manipulated with the :hg:`phase` command
if needed. See :hg:`help -v phase` for examples.
To make your commits secret by default, put this in your
configuration file::
[phases]
new-commit = secret
Phases and servers
==================
Normally, all servers are ``publishing`` by default. This means::
- all draft changesets that are pulled or cloned appear in phase
public on the client
- all draft changesets that are pushed appear as public on both
client and server
- secret changesets are neither pushed, pulled, or cloned
.. note::
Pulling a draft changeset from a publishing server does not mark it
as public on the server side due to the read-only nature of pull.
Sometimes it may be desirable to push and pull changesets in the draft
phase to share unfinished work. This can be done by setting a
repository to disable publishing in its configuration file::
[phases]
publish = False
See :hg:`help config` for more information on configuration files.
.. note::
Servers running older versions of Mercurial are treated as
publishing.
.. note::
Changesets in secret phase are not exchanged with the server. This
applies to their content: file names, file contents, and changeset
metadata. For technical reasons, the identifier (e.g. d825e4025e39)
of the secret changeset may be communicated to the server.
Examples
========
- list changesets in draft or secret phase::
hg log -r "not public()"
- change all secret changesets to draft::
hg phase --draft "secret()"
- forcibly move the current changeset and descendants from public to draft::
hg phase --force --draft .
- show a list of changeset revisions and each corresponding phase::
hg log --template "{rev} {phase}\n"
- resynchronize draft changesets relative to a remote repository::
hg phase -fd "outgoing(URL)"
See :hg:`help phase` for more information on manually manipulating phases.