##// END OF EJS Templates
exchangev2: fetch manifest revisions...
exchangev2: fetch manifest revisions Now that the server has support for retrieving manifest data, we can implement the client bits to call it. We teach the changeset fetching code to capture the manifest revisions that are encountered on incoming changesets. We then feed this into a new function which filters out known manifests and then batches up manifest data requests to the server. This is different from the previous wire protocol in a few notable ways. First, the client fetches manifest data separately and explicitly. Before, we'd ask the server for data pertaining to some changesets (via a "getbundle" command) and manifests (and files) would be sent automatically. Providing an API for looking up just manifest data separately gives clients much more flexibility for manifest management. For example, a client may choose to only fetch manifest data on demand instead of prefetching it (i.e. partial clone). Second, we send N commands to the server for manifest retrieval instead of 1. This property has a few nice side-effects. One is that the deterministic nature of the requests lends itself to server-side caching. For example, say the remote has 50,000 manifests. If the server is configured to cache responses, each time a new commit arrives, you will have a cache miss and need to regenerate all outgoing data. But if you makes N requests requesting 10,000 manifests each, a new commit will still yield cache hits on the initial, unchanged manifest batches/requests. A derived benefit from these properties is that resumable clone is conceptually simpler to implement. When making a monolithic request for all of the repository data, recovering from an interrupted clone is hard because the server was in the driver's seat and was maintaining state about all the data that needed transferred. With the client driving fetching, the client can persist the set of unfetched entities and retry/resume a fetch if something goes wrong. Or we can fetch all data N changesets at a time and slowly build up a repository. This approach is drastically easier to implement when we have server APIs exposing low-level repository primitives (such as manifests and files). We don't yet support tree manifests. But it should be possible to implement that with the existing wire protocol command. Differential Revision: https://phab.mercurial-scm.org/D4489

File last commit:

r39144:d2d89d31 default
r39674:d292328e default
Show More
mail.py
399 lines | 14.1 KiB | text/x-python | PythonLexer
# mail.py - mail sending bits for mercurial
#
# Copyright 2006 Matt Mackall <mpm@selenic.com>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
from __future__ import absolute_import
import email
import email.charset
import email.header
import email.message
import email.parser
import io
import os
import smtplib
import socket
import time
from .i18n import _
from . import (
encoding,
error,
pycompat,
sslutil,
util,
)
from .utils import (
procutil,
stringutil,
)
class STARTTLS(smtplib.SMTP):
'''Derived class to verify the peer certificate for STARTTLS.
This class allows to pass any keyword arguments to SSL socket creation.
'''
def __init__(self, ui, host=None, **kwargs):
smtplib.SMTP.__init__(self, **kwargs)
self._ui = ui
self._host = host
def starttls(self, keyfile=None, certfile=None):
if not self.has_extn("starttls"):
msg = "STARTTLS extension not supported by server"
raise smtplib.SMTPException(msg)
(resp, reply) = self.docmd("STARTTLS")
if resp == 220:
self.sock = sslutil.wrapsocket(self.sock, keyfile, certfile,
ui=self._ui,
serverhostname=self._host)
self.file = smtplib.SSLFakeFile(self.sock)
self.helo_resp = None
self.ehlo_resp = None
self.esmtp_features = {}
self.does_esmtp = 0
return (resp, reply)
class SMTPS(smtplib.SMTP):
'''Derived class to verify the peer certificate for SMTPS.
This class allows to pass any keyword arguments to SSL socket creation.
'''
def __init__(self, ui, keyfile=None, certfile=None, host=None,
**kwargs):
self.keyfile = keyfile
self.certfile = certfile
smtplib.SMTP.__init__(self, **kwargs)
self._host = host
self.default_port = smtplib.SMTP_SSL_PORT
self._ui = ui
def _get_socket(self, host, port, timeout):
if self.debuglevel > 0:
self._ui.debug('connect: %r\n' % ((host, port),))
new_socket = socket.create_connection((host, port), timeout)
new_socket = sslutil.wrapsocket(new_socket,
self.keyfile, self.certfile,
ui=self._ui,
serverhostname=self._host)
self.file = new_socket.makefile(r'rb')
return new_socket
def _pyhastls():
"""Returns true iff Python has TLS support, false otherwise."""
try:
import ssl
getattr(ssl, 'HAS_TLS', False)
return True
except ImportError:
return False
def _smtp(ui):
'''build an smtp connection and return a function to send mail'''
local_hostname = ui.config('smtp', 'local_hostname')
tls = ui.config('smtp', 'tls')
# backward compatible: when tls = true, we use starttls.
starttls = tls == 'starttls' or stringutil.parsebool(tls)
smtps = tls == 'smtps'
if (starttls or smtps) and not _pyhastls():
raise error.Abort(_("can't use TLS: Python SSL support not installed"))
mailhost = ui.config('smtp', 'host')
if not mailhost:
raise error.Abort(_('smtp.host not configured - cannot send mail'))
if smtps:
ui.note(_('(using smtps)\n'))
s = SMTPS(ui, local_hostname=local_hostname, host=mailhost)
elif starttls:
s = STARTTLS(ui, local_hostname=local_hostname, host=mailhost)
else:
s = smtplib.SMTP(local_hostname=local_hostname)
if smtps:
defaultport = 465
else:
defaultport = 25
mailport = util.getport(ui.config('smtp', 'port', defaultport))
ui.note(_('sending mail: smtp host %s, port %d\n') %
(mailhost, mailport))
s.connect(host=mailhost, port=mailport)
if starttls:
ui.note(_('(using starttls)\n'))
s.ehlo()
s.starttls()
s.ehlo()
if starttls or smtps:
ui.note(_('(verifying remote certificate)\n'))
sslutil.validatesocket(s.sock)
username = ui.config('smtp', 'username')
password = ui.config('smtp', 'password')
if username and not password:
password = ui.getpass()
if username and password:
ui.note(_('(authenticating to mail server as %s)\n') %
(username))
try:
s.login(username, password)
except smtplib.SMTPException as inst:
raise error.Abort(inst)
def send(sender, recipients, msg):
try:
return s.sendmail(sender, recipients, msg)
except smtplib.SMTPRecipientsRefused as inst:
recipients = [r[1] for r in inst.recipients.values()]
raise error.Abort('\n' + '\n'.join(recipients))
except smtplib.SMTPException as inst:
raise error.Abort(inst)
return send
def _sendmail(ui, sender, recipients, msg):
'''send mail using sendmail.'''
program = ui.config('email', 'method')
stremail = lambda x: stringutil.email(encoding.strtolocal(x))
cmdline = '%s -f %s %s' % (program, stremail(sender),
' '.join(map(stremail, recipients)))
ui.note(_('sending mail: %s\n') % cmdline)
fp = procutil.popen(cmdline, 'wb')
fp.write(util.tonativeeol(msg))
ret = fp.close()
if ret:
raise error.Abort('%s %s' % (
os.path.basename(program.split(None, 1)[0]),
procutil.explainexit(ret)))
def _mbox(mbox, sender, recipients, msg):
'''write mails to mbox'''
fp = open(mbox, 'ab+')
# Should be time.asctime(), but Windows prints 2-characters day
# of month instead of one. Make them print the same thing.
date = time.strftime(r'%a %b %d %H:%M:%S %Y', time.localtime())
fp.write('From %s %s\n' % (encoding.strtolocal(sender),
encoding.strtolocal(date)))
fp.write(msg)
fp.write('\n\n')
fp.close()
def connect(ui, mbox=None):
'''make a mail connection. return a function to send mail.
call as sendmail(sender, list-of-recipients, msg).'''
if mbox:
open(mbox, 'wb').close()
return lambda s, r, m: _mbox(mbox, s, r, m)
if ui.config('email', 'method') == 'smtp':
return _smtp(ui)
return lambda s, r, m: _sendmail(ui, s, r, m)
def sendmail(ui, sender, recipients, msg, mbox=None):
send = connect(ui, mbox=mbox)
return send(sender, recipients, msg)
def validateconfig(ui):
'''determine if we have enough config data to try sending email.'''
method = ui.config('email', 'method')
if method == 'smtp':
if not ui.config('smtp', 'host'):
raise error.Abort(_('smtp specified as email transport, '
'but no smtp host configured'))
else:
if not procutil.findexe(method):
raise error.Abort(_('%r specified as email transport, '
'but not in PATH') % method)
def codec2iana(cs):
''''''
cs = pycompat.sysbytes(email.charset.Charset(cs).input_charset.lower())
# "latin1" normalizes to "iso8859-1", standard calls for "iso-8859-1"
if cs.startswith("iso") and not cs.startswith("iso-"):
return "iso-" + cs[3:]
return cs
def mimetextpatch(s, subtype='plain', display=False):
'''Return MIME message suitable for a patch.
Charset will be detected by first trying to decode as us-ascii, then utf-8,
and finally the global encodings. If all those fail, fall back to
ISO-8859-1, an encoding with that allows all byte sequences.
Transfer encodings will be used if necessary.'''
cs = ['us-ascii', 'utf-8', encoding.encoding, encoding.fallbackencoding]
if display:
cs = ['us-ascii']
for charset in cs:
try:
s.decode(pycompat.sysstr(charset))
return mimetextqp(s, subtype, codec2iana(charset))
except UnicodeDecodeError:
pass
return mimetextqp(s, subtype, "iso-8859-1")
def mimetextqp(body, subtype, charset):
'''Return MIME message.
Quoted-printable transfer encoding will be used if necessary.
'''
cs = email.charset.Charset(charset)
msg = email.message.Message()
msg.set_type(pycompat.sysstr('text/' + subtype))
for line in body.splitlines():
if len(line) > 950:
cs.body_encoding = email.charset.QP
break
msg.set_payload(body, cs)
return msg
def _charsets(ui):
'''Obtains charsets to send mail parts not containing patches.'''
charsets = [cs.lower() for cs in ui.configlist('email', 'charsets')]
fallbacks = [encoding.fallbackencoding.lower(),
encoding.encoding.lower(), 'utf-8']
for cs in fallbacks: # find unique charsets while keeping order
if cs not in charsets:
charsets.append(cs)
return [cs for cs in charsets if not cs.endswith('ascii')]
def _encode(ui, s, charsets):
'''Returns (converted) string, charset tuple.
Finds out best charset by cycling through sendcharsets in descending
order. Tries both encoding and fallbackencoding for input. Only as
last resort send as is in fake ascii.
Caveat: Do not use for mail parts containing patches!'''
sendcharsets = charsets or _charsets(ui)
if not isinstance(s, bytes):
# We have unicode data, which we need to try and encode to
# some reasonable-ish encoding. Try the encodings the user
# wants, and fall back to garbage-in-ascii.
for ocs in sendcharsets:
try:
return s.encode(pycompat.sysstr(ocs)), ocs
except UnicodeEncodeError:
pass
except LookupError:
ui.warn(_('ignoring invalid sendcharset: %s\n') % ocs)
else:
# Everything failed, ascii-armor what we've got and send it.
return s.encode('ascii', 'backslashreplace')
# We have a bytes of unknown encoding. We'll try and guess a valid
# encoding, falling back to pretending we had ascii even though we
# know that's wrong.
try:
s.decode('ascii')
except UnicodeDecodeError:
for ics in (encoding.encoding, encoding.fallbackencoding):
try:
u = s.decode(ics)
except UnicodeDecodeError:
continue
for ocs in sendcharsets:
try:
return u.encode(pycompat.sysstr(ocs)), ocs
except UnicodeEncodeError:
pass
except LookupError:
ui.warn(_('ignoring invalid sendcharset: %s\n') % ocs)
# if ascii, or all conversion attempts fail, send (broken) ascii
return s, 'us-ascii'
def headencode(ui, s, charsets=None, display=False):
'''Returns RFC-2047 compliant header from given string.'''
if not display:
# split into words?
s, cs = _encode(ui, s, charsets)
return str(email.header.Header(s, cs))
return s
def _addressencode(ui, name, addr, charsets=None):
assert isinstance(addr, bytes)
name = headencode(ui, name, charsets)
try:
acc, dom = addr.split('@')
acc.decode('ascii')
dom = dom.decode(pycompat.sysstr(encoding.encoding)).encode('idna')
addr = '%s@%s' % (acc, dom)
except UnicodeDecodeError:
raise error.Abort(_('invalid email address: %s') % addr)
except ValueError:
try:
# too strict?
addr.decode('ascii')
except UnicodeDecodeError:
raise error.Abort(_('invalid local address: %s') % addr)
return pycompat.bytesurl(
email.utils.formataddr((name, encoding.strfromlocal(addr))))
def addressencode(ui, address, charsets=None, display=False):
'''Turns address into RFC-2047 compliant header.'''
if display or not address:
return address or ''
name, addr = email.utils.parseaddr(encoding.strfromlocal(address))
return _addressencode(ui, name, encoding.strtolocal(addr), charsets)
def addrlistencode(ui, addrs, charsets=None, display=False):
'''Turns a list of addresses into a list of RFC-2047 compliant headers.
A single element of input list may contain multiple addresses, but output
always has one address per item'''
for a in addrs:
assert isinstance(a, bytes), (r'%r unexpectedly not a bytestr' % a)
if display:
return [a.strip() for a in addrs if a.strip()]
result = []
for name, addr in email.utils.getaddresses(
[encoding.strfromlocal(a) for a in addrs]):
if name or addr:
r = _addressencode(ui, name, encoding.strtolocal(addr), charsets)
result.append(r)
return result
def mimeencode(ui, s, charsets=None, display=False):
'''creates mime text object, encodes it if needed, and sets
charset and transfer-encoding accordingly.'''
cs = 'us-ascii'
if not display:
s, cs = _encode(ui, s, charsets)
return mimetextqp(s, 'plain', cs)
if pycompat.ispy3:
def parse(fp):
ep = email.parser.Parser()
# disable the "universal newlines" mode, which isn't binary safe.
# I have no idea if ascii/surrogateescape is correct, but that's
# what the standard Python email parser does.
fp = io.TextIOWrapper(fp, encoding=r'ascii',
errors=r'surrogateescape', newline=chr(10))
try:
return ep.parse(fp)
finally:
fp.detach()
else:
def parse(fp):
ep = email.parser.Parser()
return ep.parse(fp)
def headdecode(s):
'''Decodes RFC-2047 header'''
uparts = []
for part, charset in email.header.decode_header(s):
if charset is not None:
try:
uparts.append(part.decode(charset))
continue
except UnicodeDecodeError:
pass
# On Python 3, decode_header() may return either bytes or unicode
# depending on whether the header has =?<charset>? or not
if isinstance(part, type(u'')):
uparts.append(part)
continue
try:
uparts.append(part.decode('UTF-8'))
continue
except UnicodeDecodeError:
pass
uparts.append(part.decode('ISO-8859-1'))
return encoding.unitolocal(u' '.join(uparts))