##// END OF EJS Templates
upstream » mercurial-mirror
RSS

Clone from https://www.mercurial-scm.org/repo/hg-all

largefiles: access to specific fields only if largefiles enabled (issue4547)...
largefiles: access to specific fields only if largefiles enabled (issue4547) Even if largefiles extension is enabled in a repository, "repo" object, which isn't "largefiles.reposetup()"-ed, is passed to overridden functions in the cases below unexpectedly, because extensions are enabled for each repositories strictly. (1) clone without -U: (2) pull with -U: (3) pull with --rebase: combination of "enabled@src", "disabled@dst" and "not-required@src" cause this situation. largefiles requirement @src @dst @src result -------- -------- --------------- -------------------- enabled disabled not-required aborted unexpectedly required requirement error (intentional) -------- -------- --------------- -------------------- enabled enabled * success -------- -------- --------------- -------------------- disabled enabled * success (only for "pull") -------- -------- --------------- -------------------- disabled disabled not-required success required requirement error (intentional) -------- -------- --------------- -------------------- (4) update/revert with a subrepo disabling largefiles In these cases, overridden functions cause accessing to largefiles specific fields of not "largefiles.reposetup()"-ed "repo" object, and execution is aborted. - (1), (2), (4) cause accessing to "_lfstatuswriters" in "getstatuswriter()" invoked via "updatelfiles()" - (3) causes accessing to "_lfcommithooks" in "overriderebase()" For safe accessing to these fields, this patch examines whether passed "repo" object is "largefiles.reposetup()"-ed or not before accessing to them. This patch chooses examining existence of newly introduced "_largefilesenabled" instead of "_lfcommithooks" and "_lfstatuswriters" directly, because the former is better name for the generic "largefiles is enabled in this repo" mark than the latter. In the future, all other overridden functions should avoid largefiles specific processing for efficiency, and "_largefilesenabled" is better also for such purpose. BTW, "lfstatus" can't be used for such purpose, because some code paths set it forcibly regardless of existence of it in specified "repo" object.
Mads Kiilerich - - Load All Authors

File last commit:

r17345:4f8054d3 default
r24158:d414c28d stable
Show More
test-pull-branch.t
216 lines | 5.2 KiB | text/troff | Tads3Lexer
/ tests / test-pull-branch.t
History | Annotation | Raw |Copy content |Copy permalink
$ hg init t
$ cd t
$ echo 1 > foo
$ hg ci -Am1 # 0
adding foo
$ hg branch branchA
marked working directory as branch branchA
(branches are permanent and global, did you want a bookmark?)
$ echo a1 > foo
$ hg ci -ma1 # 1
$ cd ..
$ hg init tt
$ cd tt
$ hg pull ../t
pulling from ../t
requesting all changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 1 files
(run 'hg update' to get a working copy)
$ hg up branchA
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd ../t
$ echo a2 > foo
$ hg ci -ma2 # 2
Create branch B:
$ hg up 0
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg branch branchB
marked working directory as branch branchB
(branches are permanent and global, did you want a bookmark?)
$ echo b1 > foo
$ hg ci -mb1 # 3
$ cd ../tt
A new branch is there
$ hg pull -u ../t
pulling from ../t
searching for changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 1 files (+1 heads)
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
Develop both branches:
$ cd ../t
$ hg up branchA
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo a3 > foo
$ hg ci -ma3 # 4
$ hg up branchB
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo b2 > foo
$ hg ci -mb2 # 5
$ cd ../tt
Should succeed, no new heads:
$ hg pull -u ../t
pulling from ../t
searching for changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 1 files
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
Add a head on other branch:
$ cd ../t
$ hg up branchA
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo a4 > foo
$ hg ci -ma4 # 6
$ hg up branchB
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo b3.1 > foo
$ hg ci -m b3.1 # 7
$ hg up 5
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo b3.2 > foo
$ hg ci -m b3.2 # 8
created new head
$ cd ../tt
Should succeed because there is only one head on our branch:
$ hg pull -u ../t
pulling from ../t
searching for changes
adding changesets
adding manifests
adding file changes
added 3 changesets with 3 changes to 1 files (+1 heads)
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd ../t
$ hg up -C branchA
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo a5.1 > foo
$ hg ci -ma5.1 # 9
$ hg up 6
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo a5.2 > foo
$ hg ci -ma5.2 # 10
created new head
$ hg up 7
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo b4.1 > foo
$ hg ci -m b4.1 # 11
$ hg up -C 8
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo b4.2 > foo
$ hg ci -m b4.2 # 12
$ cd ../tt
$ hg pull -u ../t
pulling from ../t
searching for changes
adding changesets
adding manifests
adding file changes
added 4 changesets with 4 changes to 1 files (+1 heads)
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
Make changes on new branch on tt
$ hg up 6
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg branch branchC
marked working directory as branch branchC
(branches are permanent and global, did you want a bookmark?)
$ echo b1 > bar
$ hg ci -Am "commit on branchC on tt"
adding bar
Make changes on default branch on t
$ cd ../t
$ hg up -C default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo a1 > bar
$ hg ci -Am "commit on default on t"
adding bar
Pull branchC from tt
$ hg pull ../tt
pulling from ../tt
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files (+1 heads)
(run 'hg heads' to see heads)
Make changes on default and branchC on tt
$ cd ../tt
$ hg pull ../t
pulling from ../t
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files (+1 heads)
(run 'hg heads' to see heads)
$ hg up -C default
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo a1 > bar1
$ hg ci -Am "commit on default on tt"
adding bar1
$ hg up branchC
2 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ echo a1 > bar2
$ hg ci -Am "commit on branchC on tt"
adding bar2
Make changes on default and branchC on t
$ cd ../t
$ hg up default
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo a1 > bar3
$ hg ci -Am "commit on default on t"
adding bar3
$ hg up branchC
2 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ echo a1 > bar4
$ hg ci -Am "commit on branchC on tt"
adding bar4
Pull from tt
$ hg pull ../tt
pulling from ../tt
searching for changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 2 files (+2 heads)
(run 'hg heads .' to see heads, 'hg merge' to merge)
$ cd ..