##// END OF EJS Templates
upstream » mercurial-mirror
RSS

Clone from https://www.mercurial-scm.org/repo/hg-all

changelog: never inline changelog...
changelog: never inline changelog The test suite mostly use small repositories, that implies that most changelog in the tests are inlined. As a result, non-inlined changelog are quite poorly tested. Since non-inline changelog are most common case for serious repositories, this lack of testing is a significant problem that results in high profile issue like the one recently fixed by 66417f55ea33 and 849745d7da89. Inlining the changelog does not bring much to the table, the number of total file saved is negligible, and the changelog will be read by most operation anyway. So this changeset is make it so we never inline the changelog, and de-inline the one that are still inlined whenever we touch them. By doing that, we remove the "dual code path" situation for writing new entry to the changelog and move to a "single code path" situation. Having a single code path simplify the code and make sure it is covered by test (if test cover that situation obviously) This impact all tests that care about the number of file and the exchange size, but there is nothing too complicated in them just a lot of churn. The churn is made "worse" by the fact rust will use the persistent nodemap on any changelog now. Which is overall a win as it means testing the persistent nodemap more and having less special cases. In short, having inline changelog is mostly useless and an endless source of pain. We get rid of it.
marmoute - - Load All Authors

File last commit:

r52074:dcaa2df1 default
r52074:dcaa2df1 default
Show More
test-http-proxy.t
122 lines | 6.5 KiB | text/troff | Tads3Lexer
/ tests / test-http-proxy.t
History | Annotation | Raw |Copy content |Copy permalink
#require serve
$ hg init a
$ cd a
$ echo a > a
$ hg ci -Ama -d '1123456789 0'
adding a
$ hg serve --config server.uncompressed=True -p $HGPORT -d --pid-file=hg.pid
$ cat hg.pid >> $DAEMON_PIDS
$ cd ..
$ tinyproxy.py $HGPORT1 localhost 2>proxy.log >/dev/null </dev/null &
$ while [ ! -f proxy.pid ]; do sleep 0; done
$ cat proxy.pid >> $DAEMON_PIDS
url for proxy, stream
$ http_proxy=http://localhost:$HGPORT1/ hg --config http_proxy.always=True clone --stream http://localhost:$HGPORT/ b
streaming all changes
7 files to transfer, 412 bytes of data (reporevlogstore no-rust !)
9 files to transfer, 538 bytes of data (reporevlogstore rust !)
4 files to transfer, 330 bytes of data (reposimplestore !)
transferred * bytes in * seconds (*/sec) (glob)
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd b
$ hg verify -q
$ cd ..
url for proxy, pull
$ http_proxy=http://localhost:$HGPORT1/ hg --config http_proxy.always=True clone http://localhost:$HGPORT/ b-pull
requesting all changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
new changesets 83180e7845de
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd b-pull
$ hg verify -q
$ cd ..
host:port for proxy
$ http_proxy=localhost:$HGPORT1 hg clone --config http_proxy.always=True http://localhost:$HGPORT/ c
requesting all changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
new changesets 83180e7845de
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
proxy url with user name and password
$ http_proxy=http://user:passwd@localhost:$HGPORT1 hg clone --config http_proxy.always=True http://localhost:$HGPORT/ d
requesting all changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
new changesets 83180e7845de
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
url with user name and password
$ http_proxy=http://user:passwd@localhost:$HGPORT1 hg clone --config http_proxy.always=True http://user:passwd@localhost:$HGPORT/ e
requesting all changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
new changesets 83180e7845de
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
bad host:port for proxy ("Protocol not supported" can happen on
misconfigured hosts)
$ http_proxy=localhost:$HGPORT2 hg clone --config http_proxy.always=True http://localhost:$HGPORT/ f
abort: error: (Connection refused|Protocol not supported|.* actively refused it|\$EADDRNOTAVAIL\$|No route to host) (re)
[100]
do not use the proxy if it is in the no list
$ http_proxy=localhost:$HGPORT1 hg clone --config http_proxy.no=localhost http://localhost:$HGPORT/ g
requesting all changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
new changesets 83180e7845de
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
proxy can't connect to server
$ http_proxy=http://localhost:$HGPORT1/ hg --config http_proxy.always=True clone http://localhost:$HGPORT2/ h
abort: HTTP Error 404: Connection refused
[100]
$ cat proxy.log
* - - [*] "GET http://localhost:$HGPORT/?cmd=capabilities HTTP/1.1" - - (glob)
$LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=batch HTTP/1.1" - - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=getbundle HTTP/1.1" - - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=0&common=0000000000000000000000000000000000000000&heads=83180e7845de420a1bb46896fd5fe05294f8d629&listkeys=bookmarks&stream=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
* - - [*] "GET http://localhost:$HGPORT/?cmd=capabilities HTTP/1.1" - - (glob)
$LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=batch HTTP/1.1" - - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=getbundle HTTP/1.1" - - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=1&common=0000000000000000000000000000000000000000&heads=83180e7845de420a1bb46896fd5fe05294f8d629&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
* - - [*] "GET http://localhost:$HGPORT/?cmd=capabilities HTTP/1.1" - - (glob)
$LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=batch HTTP/1.1" - - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=getbundle HTTP/1.1" - - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=1&common=0000000000000000000000000000000000000000&heads=83180e7845de420a1bb46896fd5fe05294f8d629&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
* - - [*] "GET http://localhost:$HGPORT/?cmd=capabilities HTTP/1.1" - - (glob)
$LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=batch HTTP/1.1" - - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=getbundle HTTP/1.1" - - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=1&common=0000000000000000000000000000000000000000&heads=83180e7845de420a1bb46896fd5fe05294f8d629&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
* - - [*] "GET http://localhost:$HGPORT/?cmd=capabilities HTTP/1.1" - - (glob)
$LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=batch HTTP/1.1" - - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=getbundle HTTP/1.1" - - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=1&common=0000000000000000000000000000000000000000&heads=83180e7845de420a1bb46896fd5fe05294f8d629&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
* - - [*] code 404, message Connection refused (glob)
$LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT2/?cmd=capabilities HTTP/1.1" 404 - (glob)