##// END OF EJS Templates
narrow: intersect provided matcher with narrowmatcher in `hg diff`...
narrow: intersect provided matcher with narrowmatcher in `hg diff` This provides significant speedups when running diff, and no change in behavior that I'm aware of (or that the tests found). I tested with a repo that I started using narrow in after it was created and attempted to run `hg diff -c .` and similar commands in it on a commit that had files not in the narrowspec. Timing numbers below, using a similar setup as my previous commits. before=9db85644, m-u is mozilla-unified at eb39298e432d (flatmanifest) and 0553b7f29eaf (treemanifest). l-d-r is a repo simulating a situation I've encountered where there's one directory with 30k+ subdirectories. N means narrow, T means treemanifest. The narrowspec is pretty small when in use, and importantly the narrowspec is applied *after* doing the initial checkout (without narrowing), so all of these files exist in the filesystem, which is not normally the case if someone has been using narrow for the entire life of the clone. Anything less than a 5% difference in performance is most likely noise. diff --git: repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before ------+---+---+------------------------+-----------------------+------------ m-u | | | 1.292 s +- 0.009 s | 1.295 s +- 0.010 s | 100.2% m-u | | x | 1.296 s +- 0.042 s | 1.299 s +- 0.026 s | 100.2% m-u | x | | 1.292 s +- 0.010 s | 1.297 s +- 0.021 s | 100.4% m-u | x | x | 84.2 ms +- 1.2 ms | 83.6 ms +- 0.2 ms | 99.3% l-d-r | | | 188.7 ms +- 2.7 ms | 188.8 ms +- 2.0 ms | 100.1% l-d-r | | x | 189.9 ms +- 1.5 ms | 189.4 ms +- 1.2 ms | 99.7% l-d-r | x | | 97.1 ms +- 1.0 ms | 87.1 ms +- 1.0 ms | 89.7% <-- l-d-r | x | x | 96.9 ms +- 0.8 ms | 87.2 ms +- 0.7 ms | 90.0% <-- diff -c . --git: repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before ------+---+---+------------------------+-----------------------+------------ m-u | | | 231.6 ms +- 3.1 ms | 228.9 ms +- 1.6 ms | 98.8% m-u | | x | 150.5 ms +- 1.7 ms | 150.7 ms +- 1.4 ms | 100.1% m-u | x | | 233.7 ms +- 2.4 ms | 232.2 ms +- 1.9 ms | 99.4% m-u | x | x | 126.1 ms +- 1.2 ms | 126.8 ms +- 1.2 ms | 100.6% l-d-r | | | 82.1 ms +- 2.0 ms | 81.8 ms +- 1.4 ms | 99.6% l-d-r | | x | 3.732 s +- 0.020 s | 3.746 s +- 0.027 s | 100.4% l-d-r | x | | 83.1 ms +- 0.8 ms | 107.6 ms +- 2.4 ms | 129.5% <-- l-d-r | x | x | 758.2 ms +- 38.8 ms | 188.5 ms +- 1.8 ms | 24.9% <-- rebase -r . --keep -d .^^: repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before ------+---+---+------------------------+-----------------------+------------ m-u | | | 5.532 s +- 0.087 s | 5.496 s +- 0.016 s | 99.3% m-u | | x | 5.554 s +- 0.061 s | 5.532 s +- 0.013 s | 99.6% m-u | x | | 5.602 s +- 0.134 s | 5.508 s +- 0.035 s | 98.3% m-u | x | x | 582.2 ms +- 15.2 ms | 572.9 ms +- 12.0 ms | 98.4% l-d-r | | | 629.5 ms +- 12.3 ms | 622.5 ms +- 7.3 ms | 98.9% l-d-r | | x | 6.173 s +- 0.062 s | 6.185 s +- 0.076 s | 100.2% l-d-r | x | | 274.5 ms +- 10.0 ms | 272.1 ms +- 6.2 ms | 99.1% l-d-r | x | x | 4.835 s +- 0.056 s | 4.826 s +- 0.034 s | 99.8% status --change . --copies: repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before ------+---+---+------------------------+-----------------------+------------ m-u | | | 214.4 ms +- 1.4 ms | 212.2 ms +- 1.7 ms | 99.0% m-u | | x | 130.9 ms +- 1.2 ms | 131.7 ms +- 1.1 ms | 100.6% m-u | x | | 215.0 ms +- 2.1 ms | 214.9 ms +- 2.7 ms | 100.0% m-u | x | x | 109.5 ms +- 2.3 ms | 107.8 ms +- 0.9 ms | 98.4% l-d-r | | | 79.6 ms +- 0.9 ms | 79.8 ms +- 1.6 ms | 100.3% l-d-r | | x | 3.799 s +- 0.037 s | 3.928 s +- 0.021 s | 103.4% <--? l-d-r | x | | 82.7 ms +- 0.7 ms | 83.2 ms +- 1.0 ms | 100.6% l-d-r | x | x | 746.8 ms +- 6.1 ms | 739.0 ms +- 4.2 ms | 99.0% status --copies: repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before ------+---+---+------------------------+-----------------------+------------ m-u | | | 1.884 s +- 0.012 s | 1.885 s +- 0.013 s | 100.1% m-u | | x | 1.897 s +- 0.027 s | 1.909 s +- 0.077 s | 100.6% m-u | x | | 1.886 s +- 0.021 s | 1.891 s +- 0.030 s | 100.3% m-u | x | x | 92.0 ms +- 0.7 ms | 92.4 ms +- 0.4 ms | 100.4% l-d-r | | | 570.3 ms +- 18.7 ms | 552.2 ms +- 4.5 ms | 96.8% l-d-r | | x | 568.9 ms +- 16.1 ms | 567.2 ms +- 11.9 ms | 99.7% l-d-r | x | | 171.1 ms +- 2.5 ms | 170.4 ms +- 1.2 ms | 99.6% l-d-r | x | x | 171.6 ms +- 3.4 ms | 171.5 ms +- 1.7 ms | 99.9% update $rev^; ~/src/hg/hg{hg}/hg update $rev: repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before ------+---+---+------------------------+-----------------------+------------ m-u | | | 3.107 s +- 0.017 s | 3.116 s +- 0.012 s | 100.3% m-u | | x | 2.943 s +- 0.010 s | 2.945 s +- 0.019 s | 100.1% m-u | x | | 3.116 s +- 0.033 s | 3.118 s +- 0.027 s | 100.1% m-u | x | x | 318.5 ms +- 2.7 ms | 320.8 ms +- 4.8 ms | 100.7% l-d-r | | | 428.9 ms +- 4.4 ms | 429.5 ms +- 4.0 ms | 100.1% l-d-r | | x | 9.593 s +- 0.081 s | 9.869 s +- 0.043 s | 102.9% l-d-r | x | | 253.2 ms +- 3.6 ms | 254.0 ms +- 2.8 ms | 100.3% l-d-r | x | x | 1.613 s +- 0.009 s | 1.630 s +- 0.017 s | 101.1% Differential Revision: https://phab.mercurial-scm.org/D4587

File last commit:

r19968:7bec3f69 stable
r39663:ee7ee0c5 default
Show More
dates.txt
39 lines | 1.2 KiB | text/plain | TextLexer
Some commands allow the user to specify a date, e.g.:
- backout, commit, import, tag: Specify the commit date.
- log, revert, update: Select revision(s) by date.
Many date formats are valid. Here are some examples:
- ``Wed Dec 6 13:18:29 2006`` (local timezone assumed)
- ``Dec 6 13:18 -0600`` (year assumed, time offset provided)
- ``Dec 6 13:18 UTC`` (UTC and GMT are aliases for +0000)
- ``Dec 6`` (midnight)
- ``13:18`` (today assumed)
- ``3:39`` (3:39AM assumed)
- ``3:39pm`` (15:39)
- ``2006-12-06 13:18:29`` (ISO 8601 format)
- ``2006-12-6 13:18``
- ``2006-12-6``
- ``12-6``
- ``12/6``
- ``12/6/6`` (Dec 6 2006)
- ``today`` (midnight)
- ``yesterday`` (midnight)
- ``now`` - right now
Lastly, there is Mercurial's internal format:
- ``1165411109 0`` (Wed Dec 6 13:18:29 2006 UTC)
This is the internal representation format for dates. The first number
is the number of seconds since the epoch (1970-01-01 00:00 UTC). The
second is the offset of the local timezone, in seconds west of UTC
(negative if the timezone is east of UTC).
The log command also accepts date ranges:
- ``<DATE`` - at or before a given date/time
- ``>DATE`` - on or after a given date/time
- ``DATE to DATE`` - a date range, inclusive
- ``-DAYS`` - within a given number of days of today