##// END OF EJS Templates
narrow: intersect provided matcher with narrowmatcher in `hg diff`...
narrow: intersect provided matcher with narrowmatcher in `hg diff` This provides significant speedups when running diff, and no change in behavior that I'm aware of (or that the tests found). I tested with a repo that I started using narrow in after it was created and attempted to run `hg diff -c .` and similar commands in it on a commit that had files not in the narrowspec. Timing numbers below, using a similar setup as my previous commits. before=9db85644, m-u is mozilla-unified at eb39298e432d (flatmanifest) and 0553b7f29eaf (treemanifest). l-d-r is a repo simulating a situation I've encountered where there's one directory with 30k+ subdirectories. N means narrow, T means treemanifest. The narrowspec is pretty small when in use, and importantly the narrowspec is applied *after* doing the initial checkout (without narrowing), so all of these files exist in the filesystem, which is not normally the case if someone has been using narrow for the entire life of the clone. Anything less than a 5% difference in performance is most likely noise. diff --git: repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before ------+---+---+------------------------+-----------------------+------------ m-u | | | 1.292 s +- 0.009 s | 1.295 s +- 0.010 s | 100.2% m-u | | x | 1.296 s +- 0.042 s | 1.299 s +- 0.026 s | 100.2% m-u | x | | 1.292 s +- 0.010 s | 1.297 s +- 0.021 s | 100.4% m-u | x | x | 84.2 ms +- 1.2 ms | 83.6 ms +- 0.2 ms | 99.3% l-d-r | | | 188.7 ms +- 2.7 ms | 188.8 ms +- 2.0 ms | 100.1% l-d-r | | x | 189.9 ms +- 1.5 ms | 189.4 ms +- 1.2 ms | 99.7% l-d-r | x | | 97.1 ms +- 1.0 ms | 87.1 ms +- 1.0 ms | 89.7% <-- l-d-r | x | x | 96.9 ms +- 0.8 ms | 87.2 ms +- 0.7 ms | 90.0% <-- diff -c . --git: repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before ------+---+---+------------------------+-----------------------+------------ m-u | | | 231.6 ms +- 3.1 ms | 228.9 ms +- 1.6 ms | 98.8% m-u | | x | 150.5 ms +- 1.7 ms | 150.7 ms +- 1.4 ms | 100.1% m-u | x | | 233.7 ms +- 2.4 ms | 232.2 ms +- 1.9 ms | 99.4% m-u | x | x | 126.1 ms +- 1.2 ms | 126.8 ms +- 1.2 ms | 100.6% l-d-r | | | 82.1 ms +- 2.0 ms | 81.8 ms +- 1.4 ms | 99.6% l-d-r | | x | 3.732 s +- 0.020 s | 3.746 s +- 0.027 s | 100.4% l-d-r | x | | 83.1 ms +- 0.8 ms | 107.6 ms +- 2.4 ms | 129.5% <-- l-d-r | x | x | 758.2 ms +- 38.8 ms | 188.5 ms +- 1.8 ms | 24.9% <-- rebase -r . --keep -d .^^: repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before ------+---+---+------------------------+-----------------------+------------ m-u | | | 5.532 s +- 0.087 s | 5.496 s +- 0.016 s | 99.3% m-u | | x | 5.554 s +- 0.061 s | 5.532 s +- 0.013 s | 99.6% m-u | x | | 5.602 s +- 0.134 s | 5.508 s +- 0.035 s | 98.3% m-u | x | x | 582.2 ms +- 15.2 ms | 572.9 ms +- 12.0 ms | 98.4% l-d-r | | | 629.5 ms +- 12.3 ms | 622.5 ms +- 7.3 ms | 98.9% l-d-r | | x | 6.173 s +- 0.062 s | 6.185 s +- 0.076 s | 100.2% l-d-r | x | | 274.5 ms +- 10.0 ms | 272.1 ms +- 6.2 ms | 99.1% l-d-r | x | x | 4.835 s +- 0.056 s | 4.826 s +- 0.034 s | 99.8% status --change . --copies: repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before ------+---+---+------------------------+-----------------------+------------ m-u | | | 214.4 ms +- 1.4 ms | 212.2 ms +- 1.7 ms | 99.0% m-u | | x | 130.9 ms +- 1.2 ms | 131.7 ms +- 1.1 ms | 100.6% m-u | x | | 215.0 ms +- 2.1 ms | 214.9 ms +- 2.7 ms | 100.0% m-u | x | x | 109.5 ms +- 2.3 ms | 107.8 ms +- 0.9 ms | 98.4% l-d-r | | | 79.6 ms +- 0.9 ms | 79.8 ms +- 1.6 ms | 100.3% l-d-r | | x | 3.799 s +- 0.037 s | 3.928 s +- 0.021 s | 103.4% <--? l-d-r | x | | 82.7 ms +- 0.7 ms | 83.2 ms +- 1.0 ms | 100.6% l-d-r | x | x | 746.8 ms +- 6.1 ms | 739.0 ms +- 4.2 ms | 99.0% status --copies: repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before ------+---+---+------------------------+-----------------------+------------ m-u | | | 1.884 s +- 0.012 s | 1.885 s +- 0.013 s | 100.1% m-u | | x | 1.897 s +- 0.027 s | 1.909 s +- 0.077 s | 100.6% m-u | x | | 1.886 s +- 0.021 s | 1.891 s +- 0.030 s | 100.3% m-u | x | x | 92.0 ms +- 0.7 ms | 92.4 ms +- 0.4 ms | 100.4% l-d-r | | | 570.3 ms +- 18.7 ms | 552.2 ms +- 4.5 ms | 96.8% l-d-r | | x | 568.9 ms +- 16.1 ms | 567.2 ms +- 11.9 ms | 99.7% l-d-r | x | | 171.1 ms +- 2.5 ms | 170.4 ms +- 1.2 ms | 99.6% l-d-r | x | x | 171.6 ms +- 3.4 ms | 171.5 ms +- 1.7 ms | 99.9% update $rev^; ~/src/hg/hg{hg}/hg update $rev: repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before ------+---+---+------------------------+-----------------------+------------ m-u | | | 3.107 s +- 0.017 s | 3.116 s +- 0.012 s | 100.3% m-u | | x | 2.943 s +- 0.010 s | 2.945 s +- 0.019 s | 100.1% m-u | x | | 3.116 s +- 0.033 s | 3.118 s +- 0.027 s | 100.1% m-u | x | x | 318.5 ms +- 2.7 ms | 320.8 ms +- 4.8 ms | 100.7% l-d-r | | | 428.9 ms +- 4.4 ms | 429.5 ms +- 4.0 ms | 100.1% l-d-r | | x | 9.593 s +- 0.081 s | 9.869 s +- 0.043 s | 102.9% l-d-r | x | | 253.2 ms +- 3.6 ms | 254.0 ms +- 2.8 ms | 100.3% l-d-r | x | x | 1.613 s +- 0.009 s | 1.630 s +- 0.017 s | 101.1% Differential Revision: https://phab.mercurial-scm.org/D4587

File last commit:

r34215:aa877860 default
r39663:ee7ee0c5 default
Show More
charencode.py
85 lines | 2.3 KiB | text/x-python | PythonLexer
# charencode.py - miscellaneous character encoding
#
# Copyright 2005-2009 Matt Mackall <mpm@selenic.com> and others
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
from __future__ import absolute_import
import array
from .. import (
pycompat,
)
def isasciistr(s):
try:
s.decode('ascii')
return True
except UnicodeDecodeError:
return False
def asciilower(s):
'''convert a string to lowercase if ASCII
Raises UnicodeDecodeError if non-ASCII characters are found.'''
s.decode('ascii')
return s.lower()
def asciiupper(s):
'''convert a string to uppercase if ASCII
Raises UnicodeDecodeError if non-ASCII characters are found.'''
s.decode('ascii')
return s.upper()
_jsonmap = []
_jsonmap.extend("\\u%04x" % x for x in range(32))
_jsonmap.extend(pycompat.bytechr(x) for x in range(32, 127))
_jsonmap.append('\\u007f')
_jsonmap[0x09] = '\\t'
_jsonmap[0x0a] = '\\n'
_jsonmap[0x22] = '\\"'
_jsonmap[0x5c] = '\\\\'
_jsonmap[0x08] = '\\b'
_jsonmap[0x0c] = '\\f'
_jsonmap[0x0d] = '\\r'
_paranoidjsonmap = _jsonmap[:]
_paranoidjsonmap[0x3c] = '\\u003c' # '<' (e.g. escape "</script>")
_paranoidjsonmap[0x3e] = '\\u003e' # '>'
_jsonmap.extend(pycompat.bytechr(x) for x in range(128, 256))
def jsonescapeu8fast(u8chars, paranoid):
"""Convert a UTF-8 byte string to JSON-escaped form (fast path)
Raises ValueError if non-ASCII characters have to be escaped.
"""
if paranoid:
jm = _paranoidjsonmap
else:
jm = _jsonmap
try:
return ''.join(jm[x] for x in bytearray(u8chars))
except IndexError:
raise ValueError
if pycompat.ispy3:
_utf8strict = r'surrogatepass'
else:
_utf8strict = r'strict'
def jsonescapeu8fallback(u8chars, paranoid):
"""Convert a UTF-8 byte string to JSON-escaped form (slow path)
Escapes all non-ASCII characters no matter if paranoid is False.
"""
if paranoid:
jm = _paranoidjsonmap
else:
jm = _jsonmap
# non-BMP char is represented as UTF-16 surrogate pair
u16b = u8chars.decode('utf-8', _utf8strict).encode('utf-16', _utf8strict)
u16codes = array.array(r'H', u16b)
u16codes.pop(0) # drop BOM
return ''.join(jm[x] if x < 128 else '\\u%04x' % x for x in u16codes)