##// END OF EJS Templates
upstream » mercurial-mirror
RSS

Clone from https://www.mercurial-scm.org/repo/hg-all

narrow: intersect provided matcher with narrowmatcher in `hg diff`...
narrow: intersect provided matcher with narrowmatcher in `hg diff` This provides significant speedups when running diff, and no change in behavior that I'm aware of (or that the tests found). I tested with a repo that I started using narrow in after it was created and attempted to run `hg diff -c .` and similar commands in it on a commit that had files not in the narrowspec. Timing numbers below, using a similar setup as my previous commits. before=9db85644, m-u is mozilla-unified at eb39298e432d (flatmanifest) and 0553b7f29eaf (treemanifest). l-d-r is a repo simulating a situation I've encountered where there's one directory with 30k+ subdirectories. N means narrow, T means treemanifest. The narrowspec is pretty small when in use, and importantly the narrowspec is applied *after* doing the initial checkout (without narrowing), so all of these files exist in the filesystem, which is not normally the case if someone has been using narrow for the entire life of the clone. Anything less than a 5% difference in performance is most likely noise. diff --git: repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before ------+---+---+------------------------+-----------------------+------------ m-u | | | 1.292 s +- 0.009 s | 1.295 s +- 0.010 s | 100.2% m-u | | x | 1.296 s +- 0.042 s | 1.299 s +- 0.026 s | 100.2% m-u | x | | 1.292 s +- 0.010 s | 1.297 s +- 0.021 s | 100.4% m-u | x | x | 84.2 ms +- 1.2 ms | 83.6 ms +- 0.2 ms | 99.3% l-d-r | | | 188.7 ms +- 2.7 ms | 188.8 ms +- 2.0 ms | 100.1% l-d-r | | x | 189.9 ms +- 1.5 ms | 189.4 ms +- 1.2 ms | 99.7% l-d-r | x | | 97.1 ms +- 1.0 ms | 87.1 ms +- 1.0 ms | 89.7% <-- l-d-r | x | x | 96.9 ms +- 0.8 ms | 87.2 ms +- 0.7 ms | 90.0% <-- diff -c . --git: repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before ------+---+---+------------------------+-----------------------+------------ m-u | | | 231.6 ms +- 3.1 ms | 228.9 ms +- 1.6 ms | 98.8% m-u | | x | 150.5 ms +- 1.7 ms | 150.7 ms +- 1.4 ms | 100.1% m-u | x | | 233.7 ms +- 2.4 ms | 232.2 ms +- 1.9 ms | 99.4% m-u | x | x | 126.1 ms +- 1.2 ms | 126.8 ms +- 1.2 ms | 100.6% l-d-r | | | 82.1 ms +- 2.0 ms | 81.8 ms +- 1.4 ms | 99.6% l-d-r | | x | 3.732 s +- 0.020 s | 3.746 s +- 0.027 s | 100.4% l-d-r | x | | 83.1 ms +- 0.8 ms | 107.6 ms +- 2.4 ms | 129.5% <-- l-d-r | x | x | 758.2 ms +- 38.8 ms | 188.5 ms +- 1.8 ms | 24.9% <-- rebase -r . --keep -d .^^: repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before ------+---+---+------------------------+-----------------------+------------ m-u | | | 5.532 s +- 0.087 s | 5.496 s +- 0.016 s | 99.3% m-u | | x | 5.554 s +- 0.061 s | 5.532 s +- 0.013 s | 99.6% m-u | x | | 5.602 s +- 0.134 s | 5.508 s +- 0.035 s | 98.3% m-u | x | x | 582.2 ms +- 15.2 ms | 572.9 ms +- 12.0 ms | 98.4% l-d-r | | | 629.5 ms +- 12.3 ms | 622.5 ms +- 7.3 ms | 98.9% l-d-r | | x | 6.173 s +- 0.062 s | 6.185 s +- 0.076 s | 100.2% l-d-r | x | | 274.5 ms +- 10.0 ms | 272.1 ms +- 6.2 ms | 99.1% l-d-r | x | x | 4.835 s +- 0.056 s | 4.826 s +- 0.034 s | 99.8% status --change . --copies: repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before ------+---+---+------------------------+-----------------------+------------ m-u | | | 214.4 ms +- 1.4 ms | 212.2 ms +- 1.7 ms | 99.0% m-u | | x | 130.9 ms +- 1.2 ms | 131.7 ms +- 1.1 ms | 100.6% m-u | x | | 215.0 ms +- 2.1 ms | 214.9 ms +- 2.7 ms | 100.0% m-u | x | x | 109.5 ms +- 2.3 ms | 107.8 ms +- 0.9 ms | 98.4% l-d-r | | | 79.6 ms +- 0.9 ms | 79.8 ms +- 1.6 ms | 100.3% l-d-r | | x | 3.799 s +- 0.037 s | 3.928 s +- 0.021 s | 103.4% <--? l-d-r | x | | 82.7 ms +- 0.7 ms | 83.2 ms +- 1.0 ms | 100.6% l-d-r | x | x | 746.8 ms +- 6.1 ms | 739.0 ms +- 4.2 ms | 99.0% status --copies: repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before ------+---+---+------------------------+-----------------------+------------ m-u | | | 1.884 s +- 0.012 s | 1.885 s +- 0.013 s | 100.1% m-u | | x | 1.897 s +- 0.027 s | 1.909 s +- 0.077 s | 100.6% m-u | x | | 1.886 s +- 0.021 s | 1.891 s +- 0.030 s | 100.3% m-u | x | x | 92.0 ms +- 0.7 ms | 92.4 ms +- 0.4 ms | 100.4% l-d-r | | | 570.3 ms +- 18.7 ms | 552.2 ms +- 4.5 ms | 96.8% l-d-r | | x | 568.9 ms +- 16.1 ms | 567.2 ms +- 11.9 ms | 99.7% l-d-r | x | | 171.1 ms +- 2.5 ms | 170.4 ms +- 1.2 ms | 99.6% l-d-r | x | x | 171.6 ms +- 3.4 ms | 171.5 ms +- 1.7 ms | 99.9% update $rev^; ~/src/hg/hg{hg}/hg update $rev: repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before ------+---+---+------------------------+-----------------------+------------ m-u | | | 3.107 s +- 0.017 s | 3.116 s +- 0.012 s | 100.3% m-u | | x | 2.943 s +- 0.010 s | 2.945 s +- 0.019 s | 100.1% m-u | x | | 3.116 s +- 0.033 s | 3.118 s +- 0.027 s | 100.1% m-u | x | x | 318.5 ms +- 2.7 ms | 320.8 ms +- 4.8 ms | 100.7% l-d-r | | | 428.9 ms +- 4.4 ms | 429.5 ms +- 4.0 ms | 100.1% l-d-r | | x | 9.593 s +- 0.081 s | 9.869 s +- 0.043 s | 102.9% l-d-r | x | | 253.2 ms +- 3.6 ms | 254.0 ms +- 2.8 ms | 100.3% l-d-r | x | x | 1.613 s +- 0.009 s | 1.630 s +- 0.017 s | 101.1% Differential Revision: https://phab.mercurial-scm.org/D4587
FUJIWARA Katsunori - - Load All Authors

File last commit:

r31050:20653270 default
r39663:ee7ee0c5 default
Show More
txnutil.py
36 lines | 1.0 KiB | text/x-python | PythonLexer
/ mercurial / txnutil.py
History | Annotation | Raw |Copy content |Copy permalink
# txnutil.py - transaction related utilities
#
# Copyright FUJIWARA Katsunori <foozy@lares.dti.ne.jp> and others
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
from __future__ import absolute_import
import errno
from . import (
encoding,
)
def mayhavepending(root):
'''return whether 'root' may have pending changes, which are
visible to this process.
'''
return root == encoding.environ.get('HG_PENDING')
def trypending(root, vfs, filename, **kwargs):
'''Open file to be read according to HG_PENDING environment variable
This opens '.pending' of specified 'filename' only when HG_PENDING
is equal to 'root'.
This returns '(fp, is_pending_opened)' tuple.
'''
if mayhavepending(root):
try:
return (vfs('%s.pending' % filename, **kwargs), True)
except IOError as inst:
if inst.errno != errno.ENOENT:
raise
return (vfs(filename, **kwargs), False)