##// END OF EJS Templates
xdiff: add a preprocessing step that trims files...
xdiff: add a preprocessing step that trims files xdiff has a `xdl_trim_ends` step that removes common lines, unmatchable lines. That is in theory good, but happens too late - after splitting, hashing, and adjusting the hash values so they are unique. Those splitting, hashing and adjusting hash values steps could have noticeable overhead. Diffing two large files with minor (one-line-ish) changes are not uncommon. In that case, the raw performance of those preparation steps seriously matter. Even allocating an O(N) array and storing line offsets to it is expensive. Therefore my previous attempts [1] [2] cannot be good enough since they do not remove the O(N) array assignment. This patch adds a preprocessing step - `xdl_trim_files` that runs before other preprocessing steps. It counts common prefix and suffix and lines in them (needed for displaying line number), without doing anything else. Testing with a crafted large (169MB) file, with minor change: ``` open('a','w').write(''.join('%s\n' % (i % 100000) for i in xrange(30000000) if i != 6000000)) open('b','w').write(''.join('%s\n' % (i % 100000) for i in xrange(30000000) if i != 6003000)) ``` Running xdiff by a simple binary [3], this patch improves the xdiff perf by more than 10x for the above case: ``` # xdiff before this patch 2.41s user 1.13s system 98% cpu 3.592 total # xdiff after this patch 0.14s user 0.16s system 98% cpu 0.309 total # gnu diffutils 0.12s user 0.15s system 98% cpu 0.272 total # (best of 20 runs) ``` It's still slightly slower than GNU diffutils. But it's pretty close now. Testing with real repo data: For the whole repo, this patch makes xdiff 25% faster: ``` # hg perfbdiff --count 100 --alldata -c d334afc585e2 --blocks [--xdiff] # xdiff, after ! wall 0.058861 comb 0.050000 user 0.050000 sys 0.000000 (best of 100) # xdiff, before ! wall 0.077816 comb 0.080000 user 0.080000 sys 0.000000 (best of 91) # bdiff ! wall 0.117473 comb 0.120000 user 0.120000 sys 0.000000 (best of 67) ``` For files that are long (ex. commands.py), the speedup is more than 3x, very significant: ``` # hg perfbdiff --count 3000 --blocks commands.py.i 1 [--xdiff] # xdiff, after ! wall 0.690583 comb 0.690000 user 0.690000 sys 0.000000 (best of 12) # xdiff, before ! wall 2.240361 comb 2.210000 user 2.210000 sys 0.000000 (best of 4) # bdiff ! wall 2.469852 comb 2.440000 user 2.440000 sys 0.000000 (best of 4) ``` [1]: https://phab.mercurial-scm.org/D2631 [2]: https://phab.mercurial-scm.org/D2634 [3]: ``` // Code to run xdiff from command line. No proper error handling. #include <stdlib.h> #include <unistd.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include "mercurial/thirdparty/xdiff/xdiff.h" #define ensure(x) if (!(x)) exit(255); mmfile_t readfile(const char *path) { struct stat st; int fd = open(path, O_RDONLY); fstat(fd, &st); mmfile_t file = { malloc(st.st_size), st.st_size }; ensure(read(fd, file.ptr, st.st_size) == st.st_size); close(fd); return file; } int main(int argc, char const *argv[]) { mmfile_t a = readfile(argv[1]), b = readfile(argv[2]); xpparam_t xpp = {0}; xdemitconf_t xecfg = {0}; xdemitcb_t ecb = {0}; xdl_diff(&a, &b, &xpp, &xecfg, &ecb); return 0; } ``` Differential Revision: https://phab.mercurial-scm.org/D2686

File last commit:

r36625:c6061cad default
r36838:f33a87cf default
Show More
templatefilters.py
463 lines | 13.6 KiB | text/x-python | PythonLexer
# templatefilters.py - common template expansion filters
#
# Copyright 2005-2008 Matt Mackall <mpm@selenic.com>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
from __future__ import absolute_import
import os
import re
import time
from . import (
encoding,
error,
hbisect,
node,
pycompat,
registrar,
templatekw,
url,
util,
)
from .utils import dateutil
urlerr = util.urlerr
urlreq = util.urlreq
if pycompat.ispy3:
long = int
# filters are callables like:
# fn(obj)
# with:
# obj - object to be filtered (text, date, list and so on)
filters = {}
templatefilter = registrar.templatefilter(filters)
@templatefilter('addbreaks')
def addbreaks(text):
"""Any text. Add an XHTML "<br />" tag before the end of
every line except the last.
"""
return text.replace('\n', '<br/>\n')
agescales = [("year", 3600 * 24 * 365, 'Y'),
("month", 3600 * 24 * 30, 'M'),
("week", 3600 * 24 * 7, 'W'),
("day", 3600 * 24, 'd'),
("hour", 3600, 'h'),
("minute", 60, 'm'),
("second", 1, 's')]
@templatefilter('age')
def age(date, abbrev=False):
"""Date. Returns a human-readable date/time difference between the
given date/time and the current date/time.
"""
def plural(t, c):
if c == 1:
return t
return t + "s"
def fmt(t, c, a):
if abbrev:
return "%d%s" % (c, a)
return "%d %s" % (c, plural(t, c))
now = time.time()
then = date[0]
future = False
if then > now:
future = True
delta = max(1, int(then - now))
if delta > agescales[0][1] * 30:
return 'in the distant future'
else:
delta = max(1, int(now - then))
if delta > agescales[0][1] * 2:
return dateutil.shortdate(date)
for t, s, a in agescales:
n = delta // s
if n >= 2 or s == 1:
if future:
return '%s from now' % fmt(t, n, a)
return '%s ago' % fmt(t, n, a)
@templatefilter('basename')
def basename(path):
"""Any text. Treats the text as a path, and returns the last
component of the path after splitting by the path separator.
For example, "foo/bar/baz" becomes "baz" and "foo/bar//" becomes "".
"""
return os.path.basename(path)
@templatefilter('count')
def count(i):
"""List or text. Returns the length as an integer."""
return len(i)
@templatefilter('dirname')
def dirname(path):
"""Any text. Treats the text as a path, and strips the last
component of the path after splitting by the path separator.
"""
return os.path.dirname(path)
@templatefilter('domain')
def domain(author):
"""Any text. Finds the first string that looks like an email
address, and extracts just the domain component. Example: ``User
<user@example.com>`` becomes ``example.com``.
"""
f = author.find('@')
if f == -1:
return ''
author = author[f + 1:]
f = author.find('>')
if f >= 0:
author = author[:f]
return author
@templatefilter('email')
def email(text):
"""Any text. Extracts the first string that looks like an email
address. Example: ``User <user@example.com>`` becomes
``user@example.com``.
"""
return util.email(text)
@templatefilter('escape')
def escape(text):
"""Any text. Replaces the special XML/XHTML characters "&", "<"
and ">" with XML entities, and filters out NUL characters.
"""
return url.escape(text.replace('\0', ''), True)
para_re = None
space_re = None
def fill(text, width, initindent='', hangindent=''):
'''fill many paragraphs with optional indentation.'''
global para_re, space_re
if para_re is None:
para_re = re.compile('(\n\n|\n\\s*[-*]\\s*)', re.M)
space_re = re.compile(br' +')
def findparas():
start = 0
while True:
m = para_re.search(text, start)
if not m:
uctext = encoding.unifromlocal(text[start:])
w = len(uctext)
while 0 < w and uctext[w - 1].isspace():
w -= 1
yield (encoding.unitolocal(uctext[:w]),
encoding.unitolocal(uctext[w:]))
break
yield text[start:m.start(0)], m.group(1)
start = m.end(1)
return "".join([util.wrap(space_re.sub(' ', util.wrap(para, width)),
width, initindent, hangindent) + rest
for para, rest in findparas()])
@templatefilter('fill68')
def fill68(text):
"""Any text. Wraps the text to fit in 68 columns."""
return fill(text, 68)
@templatefilter('fill76')
def fill76(text):
"""Any text. Wraps the text to fit in 76 columns."""
return fill(text, 76)
@templatefilter('firstline')
def firstline(text):
"""Any text. Returns the first line of text."""
try:
return text.splitlines(True)[0].rstrip('\r\n')
except IndexError:
return ''
@templatefilter('hex')
def hexfilter(text):
"""Any text. Convert a binary Mercurial node identifier into
its long hexadecimal representation.
"""
return node.hex(text)
@templatefilter('hgdate')
def hgdate(text):
"""Date. Returns the date as a pair of numbers: "1157407993
25200" (Unix timestamp, timezone offset).
"""
return "%d %d" % text
@templatefilter('isodate')
def isodate(text):
"""Date. Returns the date in ISO 8601 format: "2009-08-18 13:00
+0200".
"""
return dateutil.datestr(text, '%Y-%m-%d %H:%M %1%2')
@templatefilter('isodatesec')
def isodatesec(text):
"""Date. Returns the date in ISO 8601 format, including
seconds: "2009-08-18 13:00:13 +0200". See also the rfc3339date
filter.
"""
return dateutil.datestr(text, '%Y-%m-%d %H:%M:%S %1%2')
def indent(text, prefix):
'''indent each non-empty line of text after first with prefix.'''
lines = text.splitlines()
num_lines = len(lines)
endswithnewline = text[-1:] == '\n'
def indenter():
for i in xrange(num_lines):
l = lines[i]
if i and l.strip():
yield prefix
yield l
if i < num_lines - 1 or endswithnewline:
yield '\n'
return "".join(indenter())
@templatefilter('json')
def json(obj, paranoid=True):
if obj is None:
return 'null'
elif obj is False:
return 'false'
elif obj is True:
return 'true'
elif isinstance(obj, (int, long, float)):
return pycompat.bytestr(obj)
elif isinstance(obj, bytes):
return '"%s"' % encoding.jsonescape(obj, paranoid=paranoid)
elif isinstance(obj, str):
# This branch is unreachable on Python 2, because bytes == str
# and we'll return in the next-earlier block in the elif
# ladder. On Python 3, this helps us catch bugs before they
# hurt someone.
raise error.ProgrammingError(
'Mercurial only does output with bytes on Python 3: %r' % obj)
elif util.safehasattr(obj, 'keys'):
out = ['"%s": %s' % (encoding.jsonescape(k, paranoid=paranoid),
json(v, paranoid))
for k, v in sorted(obj.iteritems())]
return '{' + ', '.join(out) + '}'
elif util.safehasattr(obj, '__iter__'):
out = [json(i, paranoid) for i in obj]
return '[' + ', '.join(out) + ']'
else:
raise TypeError('cannot encode type %s' % obj.__class__.__name__)
@templatefilter('lower')
def lower(text):
"""Any text. Converts the text to lowercase."""
return encoding.lower(text)
@templatefilter('nonempty')
def nonempty(text):
"""Any text. Returns '(none)' if the string is empty."""
return text or "(none)"
@templatefilter('obfuscate')
def obfuscate(text):
"""Any text. Returns the input text rendered as a sequence of
XML entities.
"""
text = unicode(text, pycompat.sysstr(encoding.encoding), r'replace')
return ''.join(['&#%d;' % ord(c) for c in text])
@templatefilter('permissions')
def permissions(flags):
if "l" in flags:
return "lrwxrwxrwx"
if "x" in flags:
return "-rwxr-xr-x"
return "-rw-r--r--"
@templatefilter('person')
def person(author):
"""Any text. Returns the name before an email address,
interpreting it as per RFC 5322.
>>> person(b'foo@bar')
'foo'
>>> person(b'Foo Bar <foo@bar>')
'Foo Bar'
>>> person(b'"Foo Bar" <foo@bar>')
'Foo Bar'
>>> person(b'"Foo \"buz\" Bar" <foo@bar>')
'Foo "buz" Bar'
>>> # The following are invalid, but do exist in real-life
...
>>> person(b'Foo "buz" Bar <foo@bar>')
'Foo "buz" Bar'
>>> person(b'"Foo Bar <foo@bar>')
'Foo Bar'
"""
if '@' not in author:
return author
f = author.find('<')
if f != -1:
return author[:f].strip(' "').replace('\\"', '"')
f = author.find('@')
return author[:f].replace('.', ' ')
@templatefilter('revescape')
def revescape(text):
"""Any text. Escapes all "special" characters, except @.
Forward slashes are escaped twice to prevent web servers from prematurely
unescaping them. For example, "@foo bar/baz" becomes "@foo%20bar%252Fbaz".
"""
return urlreq.quote(text, safe='/@').replace('/', '%252F')
@templatefilter('rfc3339date')
def rfc3339date(text):
"""Date. Returns a date using the Internet date format
specified in RFC 3339: "2009-08-18T13:00:13+02:00".
"""
return dateutil.datestr(text, "%Y-%m-%dT%H:%M:%S%1:%2")
@templatefilter('rfc822date')
def rfc822date(text):
"""Date. Returns a date using the same format used in email
headers: "Tue, 18 Aug 2009 13:00:13 +0200".
"""
return dateutil.datestr(text, "%a, %d %b %Y %H:%M:%S %1%2")
@templatefilter('short')
def short(text):
"""Changeset hash. Returns the short form of a changeset hash,
i.e. a 12 hexadecimal digit string.
"""
return text[:12]
@templatefilter('shortbisect')
def shortbisect(text):
"""Any text. Treats `text` as a bisection status, and
returns a single-character representing the status (G: good, B: bad,
S: skipped, U: untested, I: ignored). Returns single space if `text`
is not a valid bisection status.
"""
return hbisect.shortlabel(text) or ' '
@templatefilter('shortdate')
def shortdate(text):
"""Date. Returns a date like "2006-09-18"."""
return dateutil.shortdate(text)
@templatefilter('slashpath')
def slashpath(path):
"""Any text. Replaces the native path separator with slash."""
return util.pconvert(path)
@templatefilter('splitlines')
def splitlines(text):
"""Any text. Split text into a list of lines."""
return templatekw.hybridlist(text.splitlines(), name='line')
@templatefilter('stringescape')
def stringescape(text):
return util.escapestr(text)
@templatefilter('stringify')
def stringify(thing):
"""Any type. Turns the value into text by converting values into
text and concatenating them.
"""
thing = templatekw.unwraphybrid(thing)
if util.safehasattr(thing, '__iter__') and not isinstance(thing, bytes):
if isinstance(thing, str):
# This is only reachable on Python 3 (otherwise
# isinstance(thing, bytes) would have been true), and is
# here to prevent infinite recursion bugs on Python 3.
raise error.ProgrammingError(
'stringify got unexpected unicode string: %r' % thing)
return "".join([stringify(t) for t in thing if t is not None])
if thing is None:
return ""
return pycompat.bytestr(thing)
@templatefilter('stripdir')
def stripdir(text):
"""Treat the text as path and strip a directory level, if
possible. For example, "foo" and "foo/bar" becomes "foo".
"""
dir = os.path.dirname(text)
if dir == "":
return os.path.basename(text)
else:
return dir
@templatefilter('tabindent')
def tabindent(text):
"""Any text. Returns the text, with every non-empty line
except the first starting with a tab character.
"""
return indent(text, '\t')
@templatefilter('upper')
def upper(text):
"""Any text. Converts the text to uppercase."""
return encoding.upper(text)
@templatefilter('urlescape')
def urlescape(text):
"""Any text. Escapes all "special" characters. For example,
"foo bar" becomes "foo%20bar".
"""
return urlreq.quote(text)
@templatefilter('user')
def userfilter(text):
"""Any text. Returns a short representation of a user name or email
address."""
return util.shortuser(text)
@templatefilter('emailuser')
def emailuser(text):
"""Any text. Returns the user portion of an email address."""
return util.emailuser(text)
@templatefilter('utf8')
def utf8(text):
"""Any text. Converts from the local character encoding to UTF-8."""
return encoding.fromlocal(text)
@templatefilter('xmlescape')
def xmlescape(text):
text = (text
.replace('&', '&amp;')
.replace('<', '&lt;')
.replace('>', '&gt;')
.replace('"', '&quot;')
.replace("'", '&#39;')) # &apos; invalid in HTML
return re.sub('[\x00-\x08\x0B\x0C\x0E-\x1F]', ' ', text)
def websub(text, websubtable):
""":websub: Any text. Only applies to hgweb. Applies the regular
expression replacements defined in the websub section.
"""
if websubtable:
for regexp, format in websubtable:
text = regexp.sub(format, text)
return text
def loadfilter(ui, extname, registrarobj):
"""Load template filter from specified registrarobj
"""
for name, func in registrarobj._table.iteritems():
filters[name] = func
# tell hggettext to extract docstrings from these functions:
i18nfunctions = filters.values()