##// END OF EJS Templates
context: write dirstate out explicitly after marking files as clean...
context: write dirstate out explicitly after marking files as clean To detect change of a file without redundant comparison of file content, dirstate recognizes a file as certainly clean, if: (1) it is already known as "normal", (2) dirstate entry for it has valid (= not "-1") timestamp, and (3) mode, size and timestamp of it on the filesystem are as same as ones expected in dirstate This works as expected in many cases, but doesn't in the corner case that changing a file keeps mode, size and timestamp of it on the filesystem. The timetable below shows steps in one of typical such situations: ---- ----------------------------------- ---------------- timestamp of "f" ---------------- dirstate file- time action mem file system ---- ----------------------------------- ---- ----- ----- N -1 *** - make file "f" clean N - execute 'hg foobar' - instantiate 'dirstate' -1 -1 - 'dirstate.normal("f")' N -1 (e.g. via dirty check) - change "f", but keep size N N+1 - release wlock - 'dirstate.write()' N N - 'hg status' shows "f" as "clean" N N N ---- ----------------------------------- ---- ----- ----- The most important point is that 'dirstate.write()' is executed at N+1 or later. This causes writing dirstate timestamp N of "f" out successfully. If it is executed at N, 'parsers.pack_dirstate()' replaces timestamp N with "-1" before actual writing dirstate out. Occasional test failure for unexpected file status is typical example of this corner case. Batch execution with small working directory is finished in no time, and rarely satisfies condition (2) above. This issue can occur in cases below; - 'hg revert --rev REV' for revisions other than the parent - failure of 'merge.update()' before 'merge.recordupdates()' The root cause of this issue is that files are changed without flushing in-memory dirstate changes via 'repo.commit()' (even though omitting 'dirstate.normallookup()' on changed files also causes this issue). To detect changes of files correctly, this patch writes in-memory dirstate changes out explicitly after marking files as clean in 'workingctx._checklookup()', which is invoked via 'repo.status()'. After this change, timetable is changed as below: ---- ----------------------------------- ---------------- timestamp of "f" ---------------- dirstate file- time action mem file system ---- ----------------------------------- ---- ----- ----- N -1 *** - make file "f" clean N - execute 'hg foobar' - instantiate 'dirstate' -1 -1 - 'dirstate.normal("f")' N -1 (e.g. via dirty check) ----------------------------------- ---- ----- ----- - 'dirsttate.write()' -1 -1 ----------------------------------- ---- ----- ----- - change "f", but keep size N N+1 - release wlock - 'dirstate.write()' -1 -1 - 'hg status' -1 -1 N ---- ----------------------------------- ---- ----- ----- To reproduce this issue in tests certainly, this patch emulates some timing critical actions as below: - timestamp of "f" in '.hg/dirstate' is -1 at the beginning 'hg debugrebuildstate' before command invocation ensures it. - make file "f" clean at N - change "f" at N 'touch -t 200001010000' before and after command invocation changes mtime of "f" to "2000-01-01 00:00" (= N). - invoke 'dirstate.write()' via 'repo.status()' at N 'fakedirstatewritetime.py' forces 'pack_dirstate()' to use "2000-01-01 00:00" as "now", only if 'pack_dirstate()' is invoked via 'workingctx._checklookup()'. - invoke 'dirstate.write()' via releasing wlock at N+1 (or "not at N") 'pack_dirstate()' via releasing wlock uses actual timestamp at runtime as "now", and it should be different from the "2000-01-01 00:00" of "f". BTW, this patch also changes 'test-largefiles-misc.t', because adding 'dirstate.write()' makes recent dirstate changes visible to external process.

File last commit:

r25186:80c5b266 default
r25753:fe03f522 default
Show More
win32mbcs.py
189 lines | 6.5 KiB | text/x-python | PythonLexer
# win32mbcs.py -- MBCS filename support for Mercurial
#
# Copyright (c) 2008 Shun-ichi Goto <shunichi.goto@gmail.com>
#
# Version: 0.3
# Author: Shun-ichi Goto <shunichi.goto@gmail.com>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
#
'''allow the use of MBCS paths with problematic encodings
Some MBCS encodings are not good for some path operations (i.e.
splitting path, case conversion, etc.) with its encoded bytes. We call
such a encoding (i.e. shift_jis and big5) as "problematic encoding".
This extension can be used to fix the issue with those encodings by
wrapping some functions to convert to Unicode string before path
operation.
This extension is useful for:
- Japanese Windows users using shift_jis encoding.
- Chinese Windows users using big5 encoding.
- All users who use a repository with one of problematic encodings on
case-insensitive file system.
This extension is not needed for:
- Any user who use only ASCII chars in path.
- Any user who do not use any of problematic encodings.
Note that there are some limitations on using this extension:
- You should use single encoding in one repository.
- If the repository path ends with 0x5c, .hg/hgrc cannot be read.
- win32mbcs is not compatible with fixutf8 extension.
By default, win32mbcs uses encoding.encoding decided by Mercurial.
You can specify the encoding by config option::
[win32mbcs]
encoding = sjis
It is useful for the users who want to commit with UTF-8 log message.
'''
import os, sys
from mercurial.i18n import _
from mercurial import util, encoding
# Note for extension authors: ONLY specify testedwith = 'internal' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = 'internal'
_encoding = None # see extsetup
def decode(arg):
if isinstance(arg, str):
uarg = arg.decode(_encoding)
if arg == uarg.encode(_encoding):
return uarg
raise UnicodeError("Not local encoding")
elif isinstance(arg, tuple):
return tuple(map(decode, arg))
elif isinstance(arg, list):
return map(decode, arg)
elif isinstance(arg, dict):
for k, v in arg.items():
arg[k] = decode(v)
return arg
def encode(arg):
if isinstance(arg, unicode):
return arg.encode(_encoding)
elif isinstance(arg, tuple):
return tuple(map(encode, arg))
elif isinstance(arg, list):
return map(encode, arg)
elif isinstance(arg, dict):
for k, v in arg.items():
arg[k] = encode(v)
return arg
def appendsep(s):
# ensure the path ends with os.sep, appending it if necessary.
try:
us = decode(s)
except UnicodeError:
us = s
if us and us[-1] not in ':/\\':
s += os.sep
return s
def basewrapper(func, argtype, enc, dec, args, kwds):
# check check already converted, then call original
for arg in args:
if isinstance(arg, argtype):
return func(*args, **kwds)
try:
# convert string arguments, call func, then convert back the
# return value.
return enc(func(*dec(args), **dec(kwds)))
except UnicodeError:
raise util.Abort(_("[win32mbcs] filename conversion failed with"
" %s encoding\n") % (_encoding))
def wrapper(func, args, kwds):
return basewrapper(func, unicode, encode, decode, args, kwds)
def reversewrapper(func, args, kwds):
return basewrapper(func, str, decode, encode, args, kwds)
def wrapperforlistdir(func, args, kwds):
# Ensure 'path' argument ends with os.sep to avoids
# misinterpreting last 0x5c of MBCS 2nd byte as path separator.
if args:
args = list(args)
args[0] = appendsep(args[0])
if 'path' in kwds:
kwds['path'] = appendsep(kwds['path'])
return func(*args, **kwds)
def wrapname(name, wrapper):
module, name = name.rsplit('.', 1)
module = sys.modules[module]
func = getattr(module, name)
def f(*args, **kwds):
return wrapper(func, args, kwds)
try:
f.__name__ = func.__name__ # fails with Python 2.3
except Exception:
pass
setattr(module, name, f)
# List of functions to be wrapped.
# NOTE: os.path.dirname() and os.path.basename() are safe because
# they use result of os.path.split()
funcs = '''os.path.join os.path.split os.path.splitext
os.path.normpath os.makedirs
mercurial.util.endswithsep mercurial.util.splitpath mercurial.util.checkcase
mercurial.util.fspath mercurial.util.pconvert mercurial.util.normpath
mercurial.util.checkwinfilename mercurial.util.checkosfilename
mercurial.util.split'''
# These functions are required to be called with local encoded string
# because they expects argument is local encoded string and cause
# problem with unicode string.
rfuncs = '''mercurial.encoding.upper mercurial.encoding.lower'''
# List of Windows specific functions to be wrapped.
winfuncs = '''os.path.splitunc'''
# codec and alias names of sjis and big5 to be faked.
problematic_encodings = '''big5 big5-tw csbig5 big5hkscs big5-hkscs
hkscs cp932 932 ms932 mskanji ms-kanji shift_jis csshiftjis shiftjis
sjis s_jis shift_jis_2004 shiftjis2004 sjis_2004 sjis2004
shift_jisx0213 shiftjisx0213 sjisx0213 s_jisx0213 950 cp950 ms950 '''
def extsetup(ui):
# TODO: decide use of config section for this extension
if ((not os.path.supports_unicode_filenames) and
(sys.platform != 'cygwin')):
ui.warn(_("[win32mbcs] cannot activate on this platform.\n"))
return
# determine encoding for filename
global _encoding
_encoding = ui.config('win32mbcs', 'encoding', encoding.encoding)
# fake is only for relevant environment.
if _encoding.lower() in problematic_encodings.split():
for f in funcs.split():
wrapname(f, wrapper)
if os.name == 'nt':
for f in winfuncs.split():
wrapname(f, wrapper)
wrapname("mercurial.osutil.listdir", wrapperforlistdir)
# wrap functions to be called with local byte string arguments
for f in rfuncs.split():
wrapname(f, reversewrapper)
# Check sys.args manually instead of using ui.debug() because
# command line options is not yet applied when
# extensions.loadall() is called.
if '--debug' in sys.argv:
ui.write("[win32mbcs] activated with encoding: %s\n"
% _encoding)