##// END OF EJS Templates
context: write dirstate out explicitly after marking files as clean...
context: write dirstate out explicitly after marking files as clean To detect change of a file without redundant comparison of file content, dirstate recognizes a file as certainly clean, if: (1) it is already known as "normal", (2) dirstate entry for it has valid (= not "-1") timestamp, and (3) mode, size and timestamp of it on the filesystem are as same as ones expected in dirstate This works as expected in many cases, but doesn't in the corner case that changing a file keeps mode, size and timestamp of it on the filesystem. The timetable below shows steps in one of typical such situations: ---- ----------------------------------- ---------------- timestamp of "f" ---------------- dirstate file- time action mem file system ---- ----------------------------------- ---- ----- ----- N -1 *** - make file "f" clean N - execute 'hg foobar' - instantiate 'dirstate' -1 -1 - 'dirstate.normal("f")' N -1 (e.g. via dirty check) - change "f", but keep size N N+1 - release wlock - 'dirstate.write()' N N - 'hg status' shows "f" as "clean" N N N ---- ----------------------------------- ---- ----- ----- The most important point is that 'dirstate.write()' is executed at N+1 or later. This causes writing dirstate timestamp N of "f" out successfully. If it is executed at N, 'parsers.pack_dirstate()' replaces timestamp N with "-1" before actual writing dirstate out. Occasional test failure for unexpected file status is typical example of this corner case. Batch execution with small working directory is finished in no time, and rarely satisfies condition (2) above. This issue can occur in cases below; - 'hg revert --rev REV' for revisions other than the parent - failure of 'merge.update()' before 'merge.recordupdates()' The root cause of this issue is that files are changed without flushing in-memory dirstate changes via 'repo.commit()' (even though omitting 'dirstate.normallookup()' on changed files also causes this issue). To detect changes of files correctly, this patch writes in-memory dirstate changes out explicitly after marking files as clean in 'workingctx._checklookup()', which is invoked via 'repo.status()'. After this change, timetable is changed as below: ---- ----------------------------------- ---------------- timestamp of "f" ---------------- dirstate file- time action mem file system ---- ----------------------------------- ---- ----- ----- N -1 *** - make file "f" clean N - execute 'hg foobar' - instantiate 'dirstate' -1 -1 - 'dirstate.normal("f")' N -1 (e.g. via dirty check) ----------------------------------- ---- ----- ----- - 'dirsttate.write()' -1 -1 ----------------------------------- ---- ----- ----- - change "f", but keep size N N+1 - release wlock - 'dirstate.write()' -1 -1 - 'hg status' -1 -1 N ---- ----------------------------------- ---- ----- ----- To reproduce this issue in tests certainly, this patch emulates some timing critical actions as below: - timestamp of "f" in '.hg/dirstate' is -1 at the beginning 'hg debugrebuildstate' before command invocation ensures it. - make file "f" clean at N - change "f" at N 'touch -t 200001010000' before and after command invocation changes mtime of "f" to "2000-01-01 00:00" (= N). - invoke 'dirstate.write()' via 'repo.status()' at N 'fakedirstatewritetime.py' forces 'pack_dirstate()' to use "2000-01-01 00:00" as "now", only if 'pack_dirstate()' is invoked via 'workingctx._checklookup()'. - invoke 'dirstate.write()' via releasing wlock at N+1 (or "not at N") 'pack_dirstate()' via releasing wlock uses actual timestamp at runtime as "now", and it should be different from the "2000-01-01 00:00" of "f". BTW, this patch also changes 'test-largefiles-misc.t', because adding 'dirstate.write()' makes recent dirstate changes visible to external process.

File last commit:

r25186:80c5b266 default
r25753:fe03f522 default
Show More
win32text.py
176 lines | 5.8 KiB | text/x-python | PythonLexer
# win32text.py - LF <-> CRLF/CR translation utilities for Windows/Mac users
#
# Copyright 2005, 2007-2009 Matt Mackall <mpm@selenic.com> and others
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
'''perform automatic newline conversion (DEPRECATED)
Deprecation: The win32text extension requires each user to configure
the extension again and again for each clone since the configuration
is not copied when cloning.
We have therefore made the ``eol`` as an alternative. The ``eol``
uses a version controlled file for its configuration and each clone
will therefore use the right settings from the start.
To perform automatic newline conversion, use::
[extensions]
win32text =
[encode]
** = cleverencode:
# or ** = macencode:
[decode]
** = cleverdecode:
# or ** = macdecode:
If not doing conversion, to make sure you do not commit CRLF/CR by accident::
[hooks]
pretxncommit.crlf = python:hgext.win32text.forbidcrlf
# or pretxncommit.cr = python:hgext.win32text.forbidcr
To do the same check on a server to prevent CRLF/CR from being
pushed or pulled::
[hooks]
pretxnchangegroup.crlf = python:hgext.win32text.forbidcrlf
# or pretxnchangegroup.cr = python:hgext.win32text.forbidcr
'''
from mercurial.i18n import _
from mercurial.node import short
from mercurial import util
import re
# Note for extension authors: ONLY specify testedwith = 'internal' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = 'internal'
# regexp for single LF without CR preceding.
re_single_lf = re.compile('(^|[^\r])\n', re.MULTILINE)
newlinestr = {'\r\n': 'CRLF', '\r': 'CR'}
filterstr = {'\r\n': 'clever', '\r': 'mac'}
def checknewline(s, newline, ui=None, repo=None, filename=None):
# warn if already has 'newline' in repository.
# it might cause unexpected eol conversion.
# see issue 302:
# http://mercurial.selenic.com/bts/issue302
if newline in s and ui and filename and repo:
ui.warn(_('WARNING: %s already has %s line endings\n'
'and does not need EOL conversion by the win32text plugin.\n'
'Before your next commit, please reconsider your '
'encode/decode settings in \nMercurial.ini or %s.\n') %
(filename, newlinestr[newline], repo.join('hgrc')))
def dumbdecode(s, cmd, **kwargs):
checknewline(s, '\r\n', **kwargs)
# replace single LF to CRLF
return re_single_lf.sub('\\1\r\n', s)
def dumbencode(s, cmd):
return s.replace('\r\n', '\n')
def macdumbdecode(s, cmd, **kwargs):
checknewline(s, '\r', **kwargs)
return s.replace('\n', '\r')
def macdumbencode(s, cmd):
return s.replace('\r', '\n')
def cleverdecode(s, cmd, **kwargs):
if not util.binary(s):
return dumbdecode(s, cmd, **kwargs)
return s
def cleverencode(s, cmd):
if not util.binary(s):
return dumbencode(s, cmd)
return s
def macdecode(s, cmd, **kwargs):
if not util.binary(s):
return macdumbdecode(s, cmd, **kwargs)
return s
def macencode(s, cmd):
if not util.binary(s):
return macdumbencode(s, cmd)
return s
_filters = {
'dumbdecode:': dumbdecode,
'dumbencode:': dumbencode,
'cleverdecode:': cleverdecode,
'cleverencode:': cleverencode,
'macdumbdecode:': macdumbdecode,
'macdumbencode:': macdumbencode,
'macdecode:': macdecode,
'macencode:': macencode,
}
def forbidnewline(ui, repo, hooktype, node, newline, **kwargs):
halt = False
seen = set()
# we try to walk changesets in reverse order from newest to
# oldest, so that if we see a file multiple times, we take the
# newest version as canonical. this prevents us from blocking a
# changegroup that contains an unacceptable commit followed later
# by a commit that fixes the problem.
tip = repo['tip']
for rev in xrange(len(repo) - 1, repo[node].rev() - 1, -1):
c = repo[rev]
for f in c.files():
if f in seen or f not in tip or f not in c:
continue
seen.add(f)
data = c[f].data()
if not util.binary(data) and newline in data:
if not halt:
ui.warn(_('attempt to commit or push text file(s) '
'using %s line endings\n') %
newlinestr[newline])
ui.warn(_('in %s: %s\n') % (short(c.node()), f))
halt = True
if halt and hooktype == 'pretxnchangegroup':
crlf = newlinestr[newline].lower()
filter = filterstr[newline]
ui.warn(_('\nTo prevent this mistake in your local repository,\n'
'add to Mercurial.ini or .hg/hgrc:\n'
'\n'
'[hooks]\n'
'pretxncommit.%s = python:hgext.win32text.forbid%s\n'
'\n'
'and also consider adding:\n'
'\n'
'[extensions]\n'
'win32text =\n'
'[encode]\n'
'** = %sencode:\n'
'[decode]\n'
'** = %sdecode:\n') % (crlf, crlf, filter, filter))
return halt
def forbidcrlf(ui, repo, hooktype, node, **kwargs):
return forbidnewline(ui, repo, hooktype, node, '\r\n', **kwargs)
def forbidcr(ui, repo, hooktype, node, **kwargs):
return forbidnewline(ui, repo, hooktype, node, '\r', **kwargs)
def reposetup(ui, repo):
if not repo.local():
return
for name, fn in _filters.iteritems():
repo.adddatafilter(name, fn)
def extsetup(ui):
if ui.configbool('win32text', 'warn', True):
ui.warn(_("win32text is deprecated: "
"http://mercurial.selenic.com/wiki/Win32TextExtension\n"))